Resources

An analytical chemist prepares a concentrated aqueous solution of potassium hydroxide (KOH\text{KOH}, molar mass =56.11 g/mol= 56.11\text{ g/mol}) that has a density of 1.180 g/mL1.180\text{ g/mL} and a measured molarity of 4.25 M4.25\text{ M}. Reverse engineer the composition of the solution to determine the initial mass percent (w/w%\text{w/w}\%) of KOH\text{KOH} in the mixture.

Answer and steps

Final answer

20.2%20.2\%

Steps

01

Assume a basis volume

To find the mass percent (w/w%\text{w/w}\%) of potassium hydroxide (KOH\ce{KOH}) from its molarity and density, choose a convenient volume of solution as a basis for calculation.

Assume exactly 1 L1\text{ L} (1000 mL1000\text{ mL}) of the solution.

02

Calculate the total mass of the solution

Using the density of the solution, convert the volume to total mass: Mass of solution=Volume⋅density\text{Mass of solution} = \text{Volume} \cdot \text{density} Mass of solution=1000 mL⋅1.180 g/mL=1180 g\text{Mass of solution} = 1000\text{ mL} \cdot 1.180\text{ g/mL} = 1180\text{ g}

03

Calculate the mass of the solute (KOH\ce{KOH})

From the molarity (4.25 M=4.25 mol/L4.25\text{ M} = 4.25\text{ mol/L}), 1 L1\text{ L} of solution contains: nKOH=4.25 moln_{\ce{KOH}} = 4.25\text{ mol}

Multiply the moles by the molar mass of KOH\ce{KOH} (56.11 g/mol56.11\text{ g/mol}) to find the mass of dissolved solute: mKOH=nKOH⋅molar massm_{\ce{KOH}} = n_{\ce{KOH}} \cdot \text{molar mass} mKOH=4.25 mol⋅56.11 g/mol=238.4675 gm_{\ce{KOH}} = 4.25\text{ mol} \cdot 56.11\text{ g/mol} = 238.4675\text{ g}

04

Determine the mass percent (w/w%\text{w/w}\%)

The mass percent of solute is the ratio of solute mass to total solution mass, multiplied by 100%100\%: Mass %=mKOHMass of solution⋅100%\text{Mass } \% = \frac{m_{\ce{KOH}}}{\text{Mass of solution}} \cdot 100\% Mass %=238.4675 g1180 g⋅100%≈20.209%\text{Mass } \% = \frac{238.4675\text{ g}}{1180\text{ g}} \cdot 100\% \approx 20.209\%

Rounded to three significant figures, the mass percent is 20.2%20.2\%.

Pitfall to avoid: Do not confuse the mass of the total solution with the mass of the solvent (water). The denominator in mass percent is always the total mass of the solution (solute ++ solvent).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student divides the mass of solute by the volume of solution in milliliters rather than the mass of the solution, confusing mass percent with mass-volume concentration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Basis: 1 L solution=1000 mL\text{Basis: } 1\text{ L solution} = 1000\text{ mL}

  2. Step 2

    Mass of KOH=4.25 mol×56.11 g/mol=238.47 g\text{Mass of KOH} = 4.25\text{ mol} \times 56.11\text{ g/mol} = 238.47\text{ g}

  3. Step 3

    Mass percent=(238.47 g1000 mL)×100%=23.8%\text{Mass percent} = \left(\frac{238.47\text{ g}}{1000\text{ mL}}\right) \times 100\% = 23.8\%

    Correct

    Mass of solution=1000 mL×1.180 g/mL=1180 g  ⟹  Mass %=238.47 g1180 g×100%≈20.2%\text{Mass of solution} = 1000\text{ mL} \times 1.180\text{ g/mL} = 1180\text{ g} \implies \text{Mass \%} = \frac{238.47\text{ g}}{1180\text{ g}} \times 100\% \approx 20.2\%

    You divided the solute mass by the solution volume (1000 mL1000\text{ mL}) instead of the total solution mass (1180 g1180\text{ g}). Mass percent (w/w%\text{w/w}\%) requires the mass of the solution in the denominator, which must be calculated using the solution density.

WHAT YOU DID WELL
Compliments from Your Teacher

You selected a convenient 1 L1\text{ L} basis volume to simplify the conversion calculations.

You correctly used the molar mass of KOH\text{KOH} to determine the mass of dissolved solute.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing mass percent with mass-volume concentration

You placed the volume of the solution (1000 mL1000\text{ mL}) into the denominator of the mass percent formula without converting it to mass using density.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated mass percent (w/w%\text{w/w}\%, mass of solute divided by mass of solution) with mass-volume percent (w/v%\text{w/v}\%, mass of solute divided by volume of solution).

REASONING PATH
Your ACEpath teacher’s suggested approach
Define mass percent (w/w%)
  • Mass %=mass of solute (g)total mass of solution (g)×100%\text{Mass \%} = \frac{\text{mass of solute (g)}}{\text{total mass of solution (g)}} \times 100\%

  • Always verify that both the numerator and denominator have units of mass before computing a percentage.

Convert solution volume to solution mass
  • Mass of solution=volume of solution×density\text{Mass of solution} = \text{volume of solution} \times \text{density}

  • Multiply the basis volume in mL\text{mL} by the density in g/mL\text{g/mL} to obtain the total solution mass in grams.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the total mass of the solution from the 1000 mL1000\text{ mL} basis: Mass of solution=1000 mL×1.180 g/mL=1180 g\text{Mass of solution} = 1000\text{ mL} \times 1.180\text{ g/mL} = 1180\text{ g}.

  2. Divide the solute mass by the total solution mass: Mass %=238.47 g1180 g×100%≈20.209%\text{Mass \%} = \frac{238.47\text{ g}}{1180\text{ g}} \times 100\% \approx 20.209\%.

  3. Round to three significant figures: 20.2%20.2\%.

Final answer

20.2%20.2\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check units in concentration formulas to distinguish between w/w%\text{w/w}\% (grams per gram) and w/v%\text{w/v}\% (grams per milliliter).

  • Practice converting solution volume to solution mass using density whenever transitioning between molarity and mass percent.

OverviewACEpath Teacher's Diagnosis

02 The student confuses solution density with solvent density and divides by solvent mass instead of total solution mass.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Basis: 1 L solution  ⟹  Mass of solution=1000 mL×1.180 g/mL=1180 g\text{Basis: } 1\text{ L solution} \implies \text{Mass of solution} = 1000\text{ mL} \times 1.180\text{ g/mL} = 1180\text{ g}

  2. Step 2

    Mass of KOH=4.25 mol×56.11 g/mol=238.47 g\text{Mass of KOH} = 4.25\text{ mol} \times 56.11\text{ g/mol} = 238.47\text{ g}

  3. Step 3

    Mass of water=1180 g−238.47 g=941.53 g\text{Mass of water} = 1180\text{ g} - 238.47\text{ g} = 941.53\text{ g}

  4. Step 4

    Mass percent=(238.47 g941.53 g)×100%=25.3%\text{Mass percent} = \left(\frac{238.47\text{ g}}{941.53\text{ g}}\right) \times 100\% = 25.3\%

    Correct

    Mass percent=(238.47 g1180 g)×100%≈20.2%\text{Mass percent} = \left(\frac{238.47\text{ g}}{1180\text{ g}}\right) \times 100\% \approx 20.2\%

    You placed the mass of water (solvent) in the denominator instead of the total mass of the solution.

WHAT YOU DID WELL
Compliments from Your Teacher

You chose a convenient 1 L1\text{ L} basis to link molarity and density directly to mass quantities.

You correctly applied density to find the total mass of the solution.

You correctly used molar mass to find the mass of potassium hydroxide.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dividing by solvent mass instead of total solution mass in mass percent

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the definition of mass percent (solute mass divided by total solution mass) with a solute-to-solvent ratio such as molality or solubility.

REASONING PATH
Your ACEpath teacher’s suggested approach
Denominator definition for mass percent
  • Mass %=msolutemsolution×100%\text{Mass \%} = \frac{m_{\text{solute}}}{m_{\text{solution}}} \times 100\%, where msolution=msolute+msolventm_{\text{solution}} = m_{\text{solute}} + m_{\text{solvent}}.

  • Always verify that the denominator represents the entire mixture (solution) rather than just the water (solvent).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Mass percent=mKOHmsolution×100%=238.47 g1180 g×100%\text{Mass percent} = \frac{m_{\text{KOH}}}{m_{\text{solution}}} \times 100\% = \frac{238.47\text{ g}}{1180\text{ g}} \times 100\%

  2. Mass percent≈20.209%≈20.2%\text{Mass percent} \approx 20.209\% \approx 20.2\%

Final answer

20.2%20.2\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Review concentration unit definitions to distinguish between quantities divided by total solution (molarity, mass percent) and quantities divided by solvent (molality).

  • Re-evaluate your final formula before computing to ensure the denominator represents the total combined mass.

OverviewACEpath Teacher's Diagnosis

03 The student divides the solution volume by density instead of multiplying, underestimating the total mass of the solution.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Basis: 1 L solution=1000 mL\text{Basis: } 1\text{ L solution} = 1000\text{ mL}

  2. Step 2

    Mass of solution=1000 mL1.180 g/mL=847.46 g\text{Mass of solution} = \frac{1000\text{ mL}}{1.180\text{ g/mL}} = 847.46\text{ g}

    Correct

    Mass of solution=1000 mL×1.180 g/mL=1180 g\text{Mass of solution} = 1000\text{ mL} \times 1.180\text{ g/mL} = 1180\text{ g}

    To find mass from volume and density, multiply volume by density: mass=V×d\text{mass} = V \times d. Dividing volume by density yields units of mL2/g\text{mL}^2/\text{g} rather than grams.

  3. Step 3

    Mass of KOH=4.25 mol×56.11 g/mol=238.47 g\text{Mass of KOH} = 4.25\text{ mol} \times 56.11\text{ g/mol} = 238.47\text{ g}

  4. Step 4

    Mass percent=238.47 g847.46 g×100%=28.1%\text{Mass percent} = \frac{238.47\text{ g}}{847.46\text{ g}} \times 100\% = 28.1\%

    Correct

    Mass percent=238.47 g1180 g×100%≈20.2%\text{Mass percent} = \frac{238.47\text{ g}}{1180\text{ g}} \times 100\% \approx 20.2\%

    Your formula for mass percent is correct, but your result is skewed because of the earlier error in the total mass of the solution.

WHAT YOU DID WELL
Compliments from Your Teacher

You selected a convenient 1 L1\text{ L} basis to convert molar concentration into moles of solute.

You used the correct molar mass to determine the mass of dissolved KOH\ce{KOH}.

You set up the mass percent formula correctly as the ratio of solute mass to total solution mass.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted density relationship (division instead of multiplication)

You divided by density rather than multiplying when converting solution volume to mass.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the algebraic arrangement of the density formula (d=m/V  ⟹  m=d×Vd = m/V \implies m = d \times V) or omitting dimensional analysis tracking during unit conversion.

REASONING PATH
Your ACEpath teacher’s suggested approach
Rearranging the Density Formula
  • Density (d)=mass (m)volume (V)  ⟹  m=V×d\text{Density } (d) = \frac{\text{mass } (m)}{\text{volume } (V)} \implies m = V \times d

  • Always write out unit cancellations: mL×gmL=g\text{mL} \times \frac{\text{g}}{\text{mL}} = \text{g} to ensure volume cancels out and leaves mass.

Physical Reality Check for Dense Solutions
  • An aqueous solution with density greater than 1.00 g/mL1.00\text{ g/mL} must have a mass in grams greater than its volume in milliliters.

  • Check that 1000 mL1000\text{ mL} of a solution with d=1.180 g/mLd = 1.180\text{ g/mL} weighs more than 1000 g1000\text{ g}, not less.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Mass of solution=1000 mL×1.180 g/mL=1180 g\text{Mass of solution} = 1000\text{ mL} \times 1.180\text{ g/mL} = 1180\text{ g}

  2. Mass percent=238.47 g1180 g×100%=20.209%≈20.2%\text{Mass percent} = \frac{238.47\text{ g}}{1180\text{ g}} \times 100\% = 20.209\% \approx 20.2\%

Final answer

20.2%20.2\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out explicit unit factors for density conversions to ensure units cancel to grams.

  • Perform a quick sanity check: if d>1 g/mLd > 1\text{ g/mL}, the numerical mass in grams must exceed the volume in milliliters.

  • Practice converting between molarity, molality, and mass percent using dimensional analysis.

Lock it in

Similar question

01

A 100.0 mL100.0\text{ mL} sample of an aqueous sodium chloride (NaCl\text{NaCl}) solution has a density of 1.050 g/mL1.050\text{ g/mL} and contains 7.35 g7.35\text{ g} of dissolved NaCl\text{NaCl}. Calculate the mass percent (w/w%\text{w/w}\%) of NaCl\text{NaCl} in the solution.

Answer

Total mass of solution =100.0 mL×1.050 g/mL=105.0 g= 100.0\text{ mL} \times 1.050\text{ g/mL} = 105.0\text{ g}. Mass percent =7.35 g105.0 g×100%=7.00%= \frac{7.35\text{ g}}{105.0\text{ g}} \times 100\% = 7.00\%.

02

A concentrated hydrochloric acid (HCl\text{HCl}, molar mass =36.46 g/mol= 36.46\text{ g/mol}) solution has a molarity of 12.1 M12.1\text{ M} and a density of 1.190 g/mL1.190\text{ g/mL}. Determine the mass percent (w/w%\text{w/w}\%) of HCl\text{HCl} in the solution.

Answer

Basis: 1 L=1000 mL1\text{ L} = 1000\text{ mL} solution. Total solution mass =1000 mL×1.190 g/mL=1190 g= 1000\text{ mL} \times 1.190\text{ g/mL} = 1190\text{ g}. Solute mass =12.1 mol×36.46 g/mol=441.17 g= 12.1\text{ mol} \times 36.46\text{ g/mol} = 441.17\text{ g}. Mass percent =441.17 g1190 g×100%≈37.1%= \frac{441.17\text{ g}}{1190\text{ g}} \times 100\% \approx 37.1\%.

03

An aqueous sulfuric acid (H2SO4\text{H}_2\text{SO}_4, molar mass =98.08 g/mol= 98.08\text{ g/mol}) solution is 28.0% w/w28.0\%\text{ w/w} and has a density of 1.210 g/mL1.210\text{ g/mL}. Reverse engineer this concentration to find the molarity of the solution.

Answer

Basis: 1000 mL1000\text{ mL} solution. Solution mass =1000 mL×1.210 g/mL=1210 g= 1000\text{ mL} \times 1.210\text{ g/mL} = 1210\text{ g}. Solute mass =1210 g×0.280=338.8 g= 1210\text{ g} \times 0.280 = 338.8\text{ g}. Solute moles =338.8 g98.08 g/mol=3.454 mol= \frac{338.8\text{ g}}{98.08\text{ g/mol}} = 3.454\text{ mol}. Since volume is 1 L1\text{ L}, Molarity =3.45 M= 3.45\text{ M}.

Loading workspace…