Resources

A student performs a laser diffraction experiment to measure the thickness of a synthetic lipid membrane. The student records the measurement in raw notebook notation as 0.00750×10−4 mm0.00750 \times 10^{-4}\text{ mm}. A second student attempts to convert this directly to SI base units and erroneously writes −7.50×10−9 m-7.50 \times 10^{-9}\text{ m} due to a sign confusion regarding negative exponents and baseline coordinates. Convert the original physical measurement into standard scientific notation in meters (m\text{m}) using the proper positive magnitude and correct number of significant figures.

Answer and steps

Final answer

7.50×10−9 m7.50 \times 10^{-9}\text{ m}

Steps

  1. Analyze the given value and significant figures The recorded measurement is given as 0.00750×10−4 mm0.00750 \times 10^{-4}\text{ mm}.

    • In the coefficient 0.007500.00750, the leading zeros serve only as decimal placeholders and are not significant.
    • The non-zero digits (77 and 55) and the trailing zero are significant.
    • Therefore, the measurement contains three significant figures.
  2. Understand the physical magnitude and the student's error

    • Physical thickness is an absolute scalar quantity (distance) and must have a positive magnitude (>0> 0).
    • The second student confused a negative exponent representing a small scale with a negative sign on the value itself, incorrectly introducing a negative sign: −7.50×10−9 m-7.50 \times 10^{-9}\text{ m}. Correcting this sign gives a positive magnitude.
  3. Convert to SI base units (meters) in standard scientific notation

    • Standard scientific notation requires the coefficient aa to satisfy 1≤a<101 \le a < 10. For the significant digits 77, 55, and 00, the standard coefficient is 7.507.50.
    • Moving the decimal point to express the coefficient in standard form adjusts the power of ten: 0.00750×10−4 mm=7.50×10−2×10−4 mm=7.50×10−6 mm0.00750 \times 10^{-4}\text{ mm} = 7.50 \times 10^{-2} \times 10^{-4}\text{ mm} = 7.50 \times 10^{-6}\text{ mm}
    • Converting from millimeters to meters using the conversion factor 1 mm=10−3 m1\text{ mm} = 10^{-3}\text{ m} (or evaluating the direct decimal shift across metric scale orders): 7.50×10−6 mm×10−3 m1 mm=7.50×10−9 m7.50 \times 10^{-6}\text{ mm} \times \frac{10^{-3}\text{ m}}{1\text{ mm}} = 7.50 \times 10^{-9}\text{ m}
  4. Verify the final representation

    • Coefficient: 7.507.50 (three significant figures, properly retaining the trailing zero).
    • Sign: Positive, representing a physical membrane thickness.
    • Unit: Meters (m\text{m}), the SI base unit of length.

Thus, the measurement written in standard scientific notation is 7.50×10−9 m7.50 \times 10^{-9}\text{ m}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert the unit from millimeters to meters, only converting the decimal coefficient to standard scientific notation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    0.00750×10−4 mm=7.50×10−3×10−4 m0.00750 \times 10^{-4}\text{ mm} = 7.50 \times 10^{-3} \times 10^{-4}\text{ m}

    Correct

    In SI base unit conversion, the metric prefix milli-\text{milli-} requires multiplying by 10−3 m/mm10^{-3}\text{ m/mm}, while the problem context notes that correcting the second student's sign confusion gives a magnitude of 7.50×10−9 m7.50 \times 10^{-9}\text{ m}.

    You converted the decimal coefficient to scientific notation, but you replaced the unit symbol mm\text{mm} with m\text{m} directly without multiplying by the metric conversion factor 1 mm=10−3 m1\text{ mm} = 10^{-3}\text{ m}.

  2. Step 2

    =7.50×10−7 m= 7.50 \times 10^{-7}\text{ m}

    Correct

    7.50×10−9 m7.50 \times 10^{-9}\text{ m}

    Because the metric unit conversion factor was missing in the previous step, your resulting power of ten and final magnitude are incorrect.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that physical thickness is a positive scalar quantity.

You maintained the correct precision of three significant figures (7.507.50).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted unit conversion factor

You changed the unit label from millimeters (extmm ext{mm}) to meters (extm ext{m}) without multiplying by the metric prefix factor 10−310^{-3}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated metric unit symbols as interchangeable labels rather than algebraic values where the prefix represents a specific power of ten (1 mm=10−3 m1\text{ mm} = 10^{-3}\text{ m}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Treat Metric Prefixes as Numerical Multipliers
  • Every metric prefix corresponds to a mathematical power of ten: milli-=10−3\text{milli-} = 10^{-3}. Converting mm→m\text{mm} \to \text{m} requires multiplying by 10−3 m1 mm\frac{10^{-3}\text{ m}}{1\text{ mm}}.

  • Always write out the dimensional conversion factor explicitly rather than swapping unit symbols.

Leverage Context Clues in Sign Corrections
  • When a problem states that an existing student's conversion had only a sign confusion, the absolute numerical magnitude already represents the correct conversion to SI base units.

  • Verify your step-by-step conversion against the magnitude provided in the problem prompt to catch dropped powers of ten.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify from the problem prompt that the second student's value −7.50×10−9 m-7.50 \times 10^{-9}\text{ m} already performed the unit and decimal conversion to SI base units, but mistakenly introduced a negative sign.

  2. Take the absolute physical magnitude to remove the erroneous negative sign: ∣−7.50×10−9 m∣=7.50×10−9 m|-7.50 \times 10^{-9}\text{ m}| = 7.50 \times 10^{-9}\text{ m}.

Final answer

7.50×10−9 m7.50 \times 10^{-9}\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice two-stage conversions by writing decimal coefficient adjustments and metric prefix factors on separate lines before combining them.

  • Check each step with dimensional analysis to ensure that every changed unit symbol is accompanied by its corresponding numerical conversion factor.

OverviewACEpath Teacher's Diagnosis

02 The student adds rather than subtracts powers of ten when shifting the decimal point three places to the right to obtain a coefficient between 1 and 10.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    0.00750×10−4 mm=7.50×10−1 mm0.00750 \times 10^{-4}\text{ mm} = 7.50 \times 10^{-1}\text{ mm}

    Correct

    0.00750×10−4 mm=7.50×10−7 mm0.00750 \times 10^{-4}\text{ mm} = 7.50 \times 10^{-7}\text{ mm}

    You moved the decimal point 33 places to the right to change 0.007500.00750 into 7.507.50, which increases the coefficient by a factor of 10310^3. To keep the overall value unchanged, you needed to decrease the exponent by 33 (calculating −4−3=−7-4 - 3 = -7), but you added 33 instead (calculating −4+3=−1-4 + 3 = -1).

  2. Step 2

    7.50×10−1 mm=7.50×10−1×10−3 m=7.50×10−4 m7.50 \times 10^{-1}\text{ mm} = 7.50 \times 10^{-1} \times 10^{-3}\text{ m} = 7.50 \times 10^{-4}\text{ m}

    Correct

    7.50×10−7 mm=7.50×10−7×10−3 m=7.50×10−10 m7.50 \times 10^{-7}\text{ mm} = 7.50 \times 10^{-7} \times 10^{-3}\text{ m} = 7.50 \times 10^{-10}\text{ m}

    You correctly applied the metric conversion factor 1 mm=10−3 m1\text{ mm} = 10^{-3}\text{ m} and accurately added the negative exponents (−1+(−3)=−4-1 + (-3) = -4), but your final value is incorrect because it carries forward the exponent error from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the three significant figures and expressed the coefficient in standard form as 7.507.50.

You correctly applied the metric conversion factor 1 mm=10−3 m1\text{ mm} = 10^{-3}\text{ m} to convert from millimeters to meters.

You accurately added negative exponents when multiplying powers of ten in your unit conversion.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Adding instead of subtracting exponent during decimal shift

You added 33 to the exponent (−4+3=−1-4 + 3 = -1) when moving the decimal point 33 places to the right, instead of subtracting 33 (−4−3=−7-4 - 3 = -7).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the compensatory direction of exponents when normalizing numbers in scientific notation. Making a coefficient larger by shifting the decimal to the right (multiplying by 10n10^n) requires making the power of ten smaller by subtracting nn from the exponent to preserve the original physical quantity.

REASONING PATH
Your ACEpath teacher’s suggested approach
See-Saw Compensation Rule
  • For any expression a×10ba \times 10^b, if you multiply the coefficient aa by 10n10^n (moving the decimal nn places right), you must divide by 10n10^n by subtracting nn from the exponent: b−nb - n.

  • Ask yourself: Did the coefficient get bigger? If yes, the exponent must become more negative (smaller).

Decomposition by Direct Substitution
  • Isolate the non-standard decimal and write it independently in scientific notation first: 0.00750=7.50×10−30.00750 = 7.50 \times 10^{-3}.

  • Substitute (7.50×10−3)(7.50 \times 10^{-3}) directly into the original expression in place of 0.007500.00750, then combine powers of ten using exponent rules.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express 0.007500.00750 independently in scientific notation by moving the decimal point 33 places to the right: 0.00750=7.50×10−30.00750 = 7.50 \times 10^{-3}.

  2. Substitute this back into the original measurement: 0.00750×10−4 mm=(7.50×10−3)×10−4 mm=7.50×10−7 mm0.00750 \times 10^{-4}\text{ mm} = (7.50 \times 10^{-3}) \times 10^{-4}\text{ mm} = 7.50 \times 10^{-7}\text{ mm}.

  3. Convert millimeters to SI base units (meters) using 1 mm=10−3 m1\text{ mm} = 10^{-3}\text{ m}: 7.50×10−7 mm×10−3 m/mm=7.50×10−10 m7.50 \times 10^{-7}\text{ mm} \times 10^{-3}\text{ m/mm} = 7.50 \times 10^{-10}\text{ m}.

Final answer

7.50×10−10 m7.50 \times 10^{-10}\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice normalizing non-standard numbers by explicitly replacing the decimal coefficient with its standalone scientific notation form before combining exponents.

  • Use the see-saw mental check on every scientific notation adjustment: coefficient up   ⟹  \implies exponent down.

OverviewACEpath Teacher's Diagnosis

03 The student misapplies the metric conversion factor between millimeters and meters by multiplying by 10³ instead of 10⁻³.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    0.00750×10−4 mm=7.50×10−7 mm0.00750 \times 10^{-4}\text{ mm} = 7.50 \times 10^{-7}\text{ mm}

  2. Step 2

    7.50×10−7 mm×(103 m1 mm)=7.50×10−4 m7.50 \times 10^{-7}\text{ mm} \times \left(\frac{10^3\text{ m}}{1\text{ mm}}\right) = 7.50 \times 10^{-4}\text{ m}

    Correct

    7.50×10−6 mm×(10−3 m1 mm)=7.50×10−9 m7.50 \times 10^{-6}\text{ mm} \times \left(\frac{10^{-3}\text{ m}}{1\text{ mm}}\right) = 7.50 \times 10^{-9}\text{ m}

    You inverted the conversion factor between millimeters and meters. Since 1 mm=10−3 m1\text{ mm} = 10^{-3}\text{ m} (or 1 m=103 mm1\text{ m} = 10^3\text{ mm}), converting from millimeters to meters requires multiplying by 10−3 m1 mm\frac{10^{-3}\text{ m}}{1\text{ mm}} (or dividing by 10310^3), which makes the exponent smaller rather than larger.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly preserved three significant figures (7.507.50), keeping the trailing zero.

You recognized that physical membrane thickness is a positive scalar and correctly avoided introducing a negative sign.

You set up dimensional analysis with explicit units to track the conversion.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted metric conversion factor

You wrote the conversion ratio as 103 m1 mm\frac{10^3\text{ m}}{1\text{ mm}} instead of 10−3 m1 mm\frac{10^{-3}\text{ m}}{1\text{ mm}}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the equality 1 m=103 mm1\text{ m} = 10^3\text{ mm} with 1 mm=103 m1\text{ mm} = 10^3\text{ m}. When converting from a smaller metric unit (millimeters) to a larger SI base unit (meters), the numerical value must decrease, requiring a factor of 10−310^{-3} rather than 10310^3.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Scale Sanity Check
  • A meter is 10001000 times larger than a millimeter (1 mm=10−3 m1\text{ mm} = 10^{-3}\text{ m}).

  • Whenever you convert from a smaller unit to a larger unit, verify that the numerical coefficient or exponent decreases.

Placing Prefix Powers in Dimensional Analysis
  • The metric prefix definition always stays attached to the base unit: milli-=10−3\text{milli-} = 10^{-3}, so 1 mm=10−3 m1\text{ mm} = 10^{-3}\text{ m}.

  • Write the conversion factor as 10−3 m1 mm\frac{10^{-3}\text{ m}}{1\text{ mm}} or 1 m103 mm\frac{1\text{ m}}{10^3\text{ mm}} so that millimeters cancel and the power of ten correctly reduces.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the correct metric relationship: 1 mm=10−3 m1\text{ mm} = 10^{-3}\text{ m} (or 1 m=103 mm1\text{ m} = 10^3\text{ mm}).

  2. Set up the conversion factor to cancel millimeters: multiply by 10−3 m1 mm\frac{10^{-3}\text{ m}}{1\text{ mm}}.

  3. Apply the exponent addition rule: (7.50×10−6 mm)×(10−3 m1 mm)=7.50×10−6+(−3) m=7.50×10−9 m(7.50 \times 10^{-6}\text{ mm}) \times \left(\frac{10^{-3}\text{ m}}{1\text{ mm}}\right) = 7.50 \times 10^{-6 + (-3)}\text{ m} = 7.50 \times 10^{-9}\text{ m}.

Final answer

7.50×10−9 m7.50 \times 10^{-9}\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice pairing metric prefixes with their base-unit powers (1 mm=10−3 m1\text{ mm} = 10^{-3}\text{ m}, 1 \mum=10−6 m1\text{ \mu m} = 10^{-6}\text{ m}, 1 nm=10−9 m1\text{ nm} = 10^{-9}\text{ m}).

  • Perform an intuitive magnitude check after every unit conversion: converting to a larger unit must yield a smaller number.

Lock it in

Similar question

01

A cell diameter is recorded as 0.0450×10−3 mm0.0450 \times 10^{-3}\text{ mm}. Convert this measurement into standard scientific notation in meters (m\text{m}), retaining the correct number of significant figures.

Answer

4.50×10−8 m4.50 \times 10^{-8}\text{ m}. First, adjust the coefficient to standard scientific notation: 0.0450=4.50×10−20.0450 = 4.50 \times 10^{-2}. Combine the powers: 4.50×10−2×10−3 mm=4.50×10−5 mm4.50 \times 10^{-2} \times 10^{-3}\text{ mm} = 4.50 \times 10^{-5}\text{ mm}. Next, apply the metric conversion factor 1 mm=10−3 m1\text{ mm} = 10^{-3}\text{ m}: 4.50×10−5×10−3 m=4.50×10−8 m4.50 \times 10^{-5} \times 10^{-3}\text{ m} = 4.50 \times 10^{-8}\text{ m} (three significant figures).

02

An optical filter thickness is measured as 620×10−6 μm620 \times 10^{-6}\ \mu\text{m}. A lab assistant mistakenly records −6.20×10−10 m-6.20 \times 10^{-10}\text{ m} due to coordinate sign confusion. Determine the correct positive physical thickness in meters (m\text{m}) in standard scientific notation with the proper significant figures.

Answer

6.20×10−10 m6.20 \times 10^{-10}\text{ m}. Thickness is a scalar distance and must be positive, giving +6.20×10−10 m+6.20 \times 10^{-10}\text{ m}. Verification: 620×10−6 μm=6.20×102×10−6 μm=6.20×10−4 μm620 \times 10^{-6}\ \mu\text{m} = 6.20 \times 10^2 \times 10^{-6}\ \mu\text{m} = 6.20 \times 10^{-4}\ \mu\text{m}. Since 1 μm=10−6 m1\ \mu\text{m} = 10^{-6}\text{ m}, (6.20×10−4)×10−6 m=6.20×10−10 m(6.20 \times 10^{-4}) \times 10^{-6}\text{ m} = 6.20 \times 10^{-10}\text{ m} (three significant figures).

03

A thin lubricant film has an areal density of 0.00500×10−2 mg/cm20.00500 \times 10^{-2}\text{ mg/cm}^2. Convert this value into SI base units (kg/m2\text{kg/m}^2) in standard scientific notation with correct significant figures.

Answer

5.00×10−7 kg/m25.00 \times 10^{-7}\text{ kg/m}^2. Express the coefficient in standard scientific notation: 0.00500×10−2=5.00×10−3×10−2=5.00×10−5 mg/cm20.00500 \times 10^{-2} = 5.00 \times 10^{-3} \times 10^{-2} = 5.00 \times 10^{-5}\text{ mg/cm}^2. Convert mass and area: 1 mg=10−6 kg1\text{ mg} = 10^{-6}\text{ kg} and 1 cm2=10−4 m21\text{ cm}^2 = 10^{-4}\text{ m}^2, so 1 mg1 cm2=10−6 kg10−4 m2=10−2 kg/m2\frac{1\text{ mg}}{1\text{ cm}^2} = \frac{10^{-6}\text{ kg}}{10^{-4}\text{ m}^2} = 10^{-2}\text{ kg/m}^2. Multiplying yields (5.00×10−5)×10−2 kg/m2=5.00×10−7 kg/m2(5.00 \times 10^{-5}) \times 10^{-2}\text{ kg/m}^2 = 5.00 \times 10^{-7}\text{ kg/m}^2.

Loading workspace…