Resources

In the reaction between aqueous calcium chloride, CaCl2(aq)\text{CaCl}_2(aq), and aqueous sodium sulfate, Na2SO4(aq)\text{Na}_2\text{SO}_4(aq), calcium sulfate, CaSO4(s)\text{CaSO}_4(s), precipitates according to the equilibrium CaSO4(s)⇌Ca2+(aq)+SO42−(aq)\text{CaSO}_4(s) \rightleftharpoons \text{Ca}^{2+}(aq) + \text{SO}_4^{2-}(aq) with Ksp=4.93×10−5K_{sp} = 4.93 \times 10^{-5} at 25 ∘C25\,^{\circ}\text{C}. If equal volumes of CaCl2(aq)\text{CaCl}_2(aq) and Na2SO4(aq)\text{Na}_2\text{SO}_4(aq) are mixed, determine the exact minimum initial concentration C0C_0 that each reactant solution must have prior to mixing in order to cross the threshold for precipitate formation (Q>KspQ > K_{sp}).

Answer and steps

Final answer

C0>1.40×10−2 MC_0 > 1.40 \times 10^{-2}\,\text{M}

Steps

01

Account for the dilution upon mixing

To determine whether a precipitate of calcium sulfate (CaSOX4\ce{CaSO4}) forms when two solutions are combined, we compare the reaction quotient (QQ) immediately after mixing with the solubility product constant (KspK_{sp}).

Let the initial concentration of both the CaClX2(aq)\ce{CaCl2}(aq) solution and the NaX2SOX4(aq)\ce{Na2SO4}(aq) solution be C0C_0, and let the volume of each solution mixed be VV.

When equal volumes are combined, the total volume doubles to Vtotal=2VV_{\text{total}} = 2V. Because both salts dissociate completely in aqueous solution:

  • CaClX2(aq)→CaX2+(aq)+2ClX−(aq)\ce{CaCl2}(aq) \rightarrow \ce{Ca^2+}(aq) + 2\ce{Cl-}(aq)
  • NaX2SOX4(aq)→2NaX+(aq)+SOX4X2−(aq)\ce{Na2SO4}(aq) \rightarrow 2\ce{Na+}(aq) + \ce{SO4^2-}(aq)

The concentrations of the reacting ions immediately upon mixing (before any reaction occurs) are diluted by a factor of 2: [CaX2+]=C0⋅V2V=C02[\ce{Ca^2+}] = \frac{C_0 \cdot V}{2V} = \frac{C_0}{2} [SOX4X2−]=C0⋅V2V=C02[\ce{SO4^2-}] = \frac{C_0 \cdot V}{2V} = \frac{C_0}{2}

Common Pitfall: Forgetting to account for the dilution effect when mixing equal volumes is a frequent error. Always calculate ion concentrations based on the total combined volume.


02

Set up the reaction quotient expression

The dissolution equilibrium for calcium sulfate is: CaSOX4(s)⇌CaX2+(aq)+SOX4X2−(aq)\ce{CaSO4}(s) \rightleftharpoons \ce{Ca^2+}(aq) + \ce{SO4^2-}(aq)

The reaction quotient QQ is defined as: Q=[CaX2+][SOX4X2−]Q = [\ce{Ca^2+}][\ce{SO4^2-}]

Substituting the diluted concentrations gives: Q=(C02)(C02)=C024Q = \left(\frac{C_0}{2}\right)\left(\frac{C_0}{2}\right) = \frac{C_0^2}{4}


03

Solve for the threshold concentration C0C_0

A precipitate begins to form when the ion product exceeds the solubility product (Q>KspQ > K_{sp}): C024>Ksp\frac{C_0^2}{4} > K_{sp}

Substitute Ksp=4.93×10−5K_{sp} = 4.93 \times 10^{-5}: C02>4⋅Ksp=4⋅(4.93×10−5)=1.972×10−4C_0^2 > 4 \cdot K_{sp} = 4 \cdot (4.93 \times 10^{-5}) = 1.972 \times 10^{-4}

Taking the square root on both sides: C0>1.972×10−4≈1.404×10−2 MC_0 > \sqrt{1.972 \times 10^{-4}} \approx 1.404 \times 10^{-2}\,\text{M}

Rounded to three significant figures, the initial concentration of each solution must satisfy: C0>1.40×10−2 MC_0 > 1.40 \times 10^{-2}\,\text{M}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores dilution from mixing equal volumes, equating the initial concentration C0 directly to ion concentrations at the moment of mixing and finding C0 = 7.02 × 10^(-3) M.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Q=[Ca2+][SO42−]=Ksp  ⟹  C02=4.93×10−5Q = [\text{Ca}^{2+}][\text{SO}_4^{2-}] = K_{sp} \implies C_0^2 = 4.93 \times 10^{-5}

    Correct

    [Ca2+]=C02[\text{Ca}^{2+}] = \frac{C_0}{2}, [SO42−]=C02  ⟹  Q=(C02)(C02)=C024>4.93×10−5[\text{SO}_4^{2-}] = \frac{C_0}{2} \implies Q = \left(\frac{C_0}{2}\right)\left(\frac{C_0}{2}\right) = \frac{C_0^2}{4} > 4.93 \times 10^{-5}

    You set the ion concentrations in the mixture directly equal to C0C_0. Because equal volumes of the two solutions are mixed, the total volume doubles (Vtotal=2VV_{\text{total}} = 2V), cutting the concentration of each ion in half before precipitation begins.

  2. Step 2

    C0=4.93×10−5=7.02×10−3 MC_0 = \sqrt{4.93 \times 10^{-5}} = 7.02 \times 10^{-3}\text{ M}

    Correct

    C0>4×4.93×10−5≈1.40×10−2 MC_0 > \sqrt{4 \times 4.93 \times 10^{-5}} \approx 1.40 \times 10^{-2}\text{ M}

    Your arithmetic was carried out correctly from your equation, but the numerical answer is off by a factor of 2 due to the missing dilution factor from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the solubility product expression Q=[Ca2+][SO42−]Q = [\text{Ca}^{2+}][\text{SO}_4^{2-}] for CaSO4(s)\text{CaSO}_4(s).

You correctly recognized that precipitate formation begins when QQ reaches KspK_{sp}.

You correctly computed the square root of your numerical value.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of dilution factor upon mixing

You forgot to account for the total volume doubling when equal volumes of reactant solutions are combined.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating initial stock concentrations prior to mixing as equal to the instantaneous concentrations in the combined solution without applying M1V1=M2V2M_1 V_1 = M_2 V_2.

REASONING PATH
Your ACEpath teacher’s suggested approach
Account for Volume Changes
  • Whenever two solutions are combined, the total volume is Vtotal=V1+V2V_{\text{total}} = V_1 + V_2, and each species is diluted: Cmix=C0VVtotalC_{\text{mix}} = \frac{C_0 V}{V_{\text{total}}}.

  • Calculate the diluted concentration of each ion in the combined volume before substituting them into the reaction quotient QQ.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Dilution upon combining equal volumes VV: [Ca2+]=C0⋅V2V=C02[\text{Ca}^{2+}] = \frac{C_0 \cdot V}{2V} = \frac{C_0}{2} and [SO42−]=C0⋅V2V=C02[\text{SO}_4^{2-}] = \frac{C_0 \cdot V}{2V} = \frac{C_0}{2}.

  2. Substitute into the reaction quotient: Q=[Ca2+][SO42−]=(C02)2=C024Q = [\text{Ca}^{2+}][\text{SO}_4^{2-}] = \left(\frac{C_0}{2}\right)^2 = \frac{C_0^2}{4}.

  3. Apply the precipitation condition Q>KspQ > K_{sp}: C024>4.93×10−5  ⟹  C02>1.972×10−4\frac{C_0^2}{4} > 4.93 \times 10^{-5} \implies C_0^2 > 1.972 \times 10^{-4}.

  4. Solve for C0C_0: C0>1.972×10−4≈1.40×10−2 MC_0 > \sqrt{1.972 \times 10^{-4}} \approx 1.40 \times 10^{-2}\text{ M}.

Final answer

C0>1.40×10−2 MC_0 > 1.40 \times 10^{-2}\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Check whether solutions are mixed together in the problem statement; if volumes are combined, immediately write down Vtotal=V1+V2V_{\text{total}} = V_1 + V_2.

  • Compute the diluted ion concentrations Mmix=M0V0VtotalM_{\text{mix}} = \frac{M_0 V_0}{V_{\text{total}}} before setting up the QspQ_{sp} expression.

  • Practice mixing problems involving different volume ratios, such as 1:21:2 or 1:31:3, to build familiarity with dilution factors.

OverviewACEpath Teacher's Diagnosis

02 The student mistakenly divides the initial concentration by 4 instead of 2 under the belief that mixing two solutions quarters the concentration, yielding C0 = 2.81 × 10^(-2) M.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    [Ca2+]=[SO42−]=C04[\text{Ca}^{2+}] = [\text{SO}_4^{2-}] = \frac{C_0}{4}

    Correct

    [Ca2+]=[SO42−]=C0⋅V2V=C02[\text{Ca}^{2+}] = [\text{SO}_4^{2-}] = \frac{C_0 \cdot V}{2V} = \frac{C_0}{2}

    When equal volumes VV of two solutions are mixed, the total volume becomes 2V2V. Diluting an initial concentration C0C_0 into twice the volume halves the concentration to C02\frac{C_0}{2}, rather than dividing it by 4.

  2. Step 2

    Q=(C04)2=Ksp  ⟹  (C04)2=4.93×10−5Q = \left(\frac{C_0}{4}\right)^2 = K_{sp} \implies \left(\frac{C_0}{4}\right)^2 = 4.93 \times 10^{-5}

    Correct

    Q=(C02)2>4.93×10−5Q = \left(\frac{C_0}{2}\right)^2 > 4.93 \times 10^{-5}

    Your formulation for the ion product QQ followed logically from your concentration expressions, but it carried forward the incorrect dilution factor.

  3. Step 3

    C04=7.02×10−3  ⟹  C0=2.81×10−2 M\frac{C_0}{4} = 7.02 \times 10^{-3} \implies C_0 = 2.81 \times 10^{-2}\,\text{M}

    Correct

    C02=4.93×10−5≈7.02×10−3  ⟹  C0>1.40×10−2 M\frac{C_0}{2} = \sqrt{4.93 \times 10^{-5}} \approx 7.02 \times 10^{-3} \implies C_0 > 1.40 \times 10^{-2}\,\text{M}

    Your algebraic calculation and square root were carried out correctly, but the final numerical value was doubled due to the initial dilution error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the equilibrium expression Q=[Ca2+][SO42−]Q = [\text{Ca}^{2+}][\text{SO}_4^{2-}] for calcium sulfate precipitation.

You correctly set the threshold for precipitation at Q=KspQ = K_{sp} and accurately computed the square root 4.93×10−5≈7.02×10−3\sqrt{4.93 \times 10^{-5}} \approx 7.02 \times 10^{-3}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect Dilution Factor upon Mixing

Dividing the initial reactant concentration by 4 instead of 2 when mixing equal volumes.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You may have conflated the total dilution of each single ion with the factor of 4 that appears in the denominator of the product expression Q=C024Q = \frac{C_0^2}{4}. Each solution's volume only doubles upon mixing, so each concentration is halved ($ C02\frac{C_0}{2}$).

REASONING PATH
Your ACEpath teacher’s suggested approach
Calculate Dilution by Volume Ratio
  • Cmixed=C0⋅V1V1+V2C_{\text{mixed}} = \frac{C_0 \cdot V_1}{V_1 + V_2}. When V1=V2=VV_1 = V_2 = V, Vtotal=2VV_{\text{total}} = 2V, so Cmixed=C02C_{\text{mixed}} = \frac{C_0}{2}.

  • Always determine the total volume first and apply M1V1=M2V2M_1 V_1 = M_2 V_2 separately to each ion before writing the QQ expression.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the diluted concentrations using the doubling of volume: [Ca2+]=[SO42−]=C02[\text{Ca}^{2+}] = [\text{SO}_4^{2-}] = \frac{C_0}{2}.

  2. Substitute into the reaction quotient: Q=(C02)(C02)=C024Q = \left(\frac{C_0}{2}\right)\left(\frac{C_0}{2}\right) = \frac{C_0^2}{4}.

  3. Set Q>KspQ > K_{sp}: C024>4.93×10−5  ⟹  C02>1.972×10−4\frac{C_0^2}{4} > 4.93 \times 10^{-5} \implies C_0^2 > 1.972 \times 10^{-4}.

  4. Take the square root: C0>1.404×10−2 MC_0 > 1.404 \times 10^{-2}\,\text{M}.

Final answer

C0>1.40×10−2 MC_0 > 1.40 \times 10^{-2}\,\text{M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice mixing problems by explicitly writing the formula M2=M1V1VtotalM_2 = M_1 \frac{V_1}{V_{\text{total}}} for each separate component before evaluating equilibrium expressions.

  • Check that you separate the dilution factor of an individual species (factor of 2) from the product factor in the solubility quotient (factor of 4).

OverviewACEpath Teacher's Diagnosis

03 The student accounts for dilution by halving the concentration after solving for the ion concentration rather than doubling it, resulting in C0 = 3.51 × 10^(-3) M.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    [Ca2+]=[SO42−]=4.93×10−5=7.02×10−3 M[\text{Ca}^{2+}] = [\text{SO}_4^{2-}] = \sqrt{4.93 \times 10^{-5}} = 7.02 \times 10^{-3}\text{ M}

  2. Step 2

    Due to equal volumes, \text{Due to equal volumes, } C_0 = [Ca2+]2\frac{[\text{Ca}^{2+}]}{2}

    Correct

    [Ca\text{Ca}^{2+}]{mix\text{mix}} = C02\frac{C_0}{2}   ⟹  \implies C_0 = 2[Ca\text{Ca}^{2+}]{mix\text{mix}}

    When equal volumes are mixed, the solution becomes diluted, meaning the mixture's concentration is half of the initial concentration ([Ca2+]mix=C02[\text{Ca}^{2+}]_{\text{mix}} = \frac{C_0}{2}). Therefore, the initial stock solution C0C_0 must be twice as concentrated as the mixture, not half.

  3. Step 3

    C_0 = 7.02×10−32\frac{7.02 \times 10^{-3}}{2} = 3.51 ×\times 10^{-3} M\text{ M}

    Correct

    C_0 > 2 ×\times (7.02 ×\times 10^{-3} M\text{ M}) = 1.40 ×\times 10^{-2} M\text{ M}

    Because the dilution formula was inverted, this step calculated half of the mixture's concentration rather than doubling it to find the initial reactant concentration.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the reaction quotient at threshold requires [Ca2+][SO42−]=Ksp[\text{Ca}^{2+}][\text{SO}_4^{2-}] = K_{sp}.

You accurately computed the square root of 4.93×10−54.93 \times 10^{-5} as 7.02×10−3 M7.02 \times 10^{-3}\text{ M}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Dilution Factor

You divided by 2 instead of multiplying by 2 when converting from the post-mixing ion concentration back to the pre-mixing initial concentration.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the concentration before mixing (C0C_0) with the concentration after mixing (CmixC_{\text{mix}}). Mixing equal volumes doubles the total volume and halves the concentration, which requires the original stock solution to be more concentrated than the mixture (C0=2CmixC_0 = 2 C_{\text{mix}}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Direction of Dilution
  • Dilution lowers concentration: Cinitial>CfinalC_{\text{initial}} > C_{\text{final}} whenever additional volume is added.

  • Check your result intuitively: can the original unmixed solution be less concentrated than the solution after it was diluted with another liquid?

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the dilution relation for equal volumes: [Ca2+]mix=C0⋅V2V=C02[\text{Ca}^{2+}]_{\text{mix}} = \frac{C_0 \cdot V}{2V} = \frac{C_0}{2}.

  2. Rearrange to solve for the initial stock concentration: C0=2[Ca2+]mixC_0 = 2[\text{Ca}^{2+}]_{\text{mix}}.

  3. Substitute the threshold concentration: C0>2×(7.02×10−3 M)=1.40×10−2 MC_0 > 2 \times (7.02 \times 10^{-3}\text{ M}) = 1.40 \times 10^{-2}\text{ M}.

Final answer

C0>1.40×10−2 MC_0 > 1.40 \times 10^{-2}\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the dilution formula M1V1=M2V2M_1 V_1 = M_2 V_2 explicitly with clear labels like 'initial' and 'mixed' before rearranging for the unknown variable.

  • Perform a physical sanity check on dilution problems: mixing two solutions increases total volume, so the concentration of a solute must decrease from before mixing to after mixing.

Lock it in

Similar question

01

Equal volumes of 0.020 M AgNO3(aq)0.020\text{ M }\text{AgNO}_3(aq) and 0.020 M NaCl(aq)0.020\text{ M }\text{NaCl}(aq) are mixed at 25 ∘C25\,^{\circ}\text{C}. For AgCl(s)\text{AgCl}(s), Ksp=1.8×10−10K_{sp} = 1.8 \times 10^{-10}. Calculate the reaction quotient QQ immediately upon mixing and state whether a precipitate will form.

Answer

Upon mixing equal volumes, [Ag+]=[Cl−]=0.020 M2=0.010 M[\text{Ag}^+] = [\text{Cl}^-] = \frac{0.020\text{ M}}{2} = 0.010\text{ M}. Then Q=[Ag+][Cl−]=(1.0×10−2)2=1.0×10−4Q = [\text{Ag}^+][\text{Cl}^-] = (1.0 \times 10^{-2})^2 = 1.0 \times 10^{-4}. Since Q=1.0×10−4>Ksp=1.8×10−10Q = 1.0 \times 10^{-4} > K_{sp} = 1.8 \times 10^{-10}, a precipitate of AgCl(s)\text{AgCl}(s) will form.

02

A 100.0 mL100.0\text{ mL} sample of C0 M Pb(NO3)2(aq)C_0\text{ M }\text{Pb(NO}_3)_2(aq) is mixed with 300.0 mL300.0\text{ mL} of 0.040 M NaI(aq)0.040\text{ M }\text{NaI}(aq). For PbI2(s)\text{PbI}_2(s), Ksp=7.1×10−9K_{sp} = 7.1 \times 10^{-9}. Determine the minimum value of C0C_0 required for PbI2(s)\text{PbI}_2(s) to precipitate.

Answer

Vtotal=100.0+300.0=400.0 mLV_{\text{total}} = 100.0 + 300.0 = 400.0\text{ mL}. Diluted concentrations: [Pb2+]=C0×100.0400.0=0.25C0[\text{Pb}^{2+}] = C_0 \times \frac{100.0}{400.0} = 0.25 C_0, and [I−]=0.040×300.0400.0=0.030 M[\text{I}^-] = 0.040 \times \frac{300.0}{400.0} = 0.030\text{ M}. Setting Q=[Pb2+][I−]2>KspQ = [\text{Pb}^{2+}][\text{I}^-]^2 > K_{sp}: (0.25C0)(0.030)2>7.1×10−9  ⟹  (0.25C0)(9.0×10−4)>7.1×10−9  ⟹  2.25×10−4C0>7.1×10−9  ⟹  C0>3.2×10−5 M(0.25 C_0)(0.030)^2 > 7.1 \times 10^{-9} \implies (0.25 C_0)(9.0 \times 10^{-4}) > 7.1 \times 10^{-9} \implies 2.25 \times 10^{-4} C_0 > 7.1 \times 10^{-9} \implies C_0 > 3.2 \times 10^{-5}\text{ M}.

03

Equal volumes of Mg(NO3)2(aq)\text{Mg(NO}_3)_2(aq) and NaOH(aq)\text{NaOH}(aq), each initially having concentration C0C_0, are mixed. Given that Mg(OH)2(s)\text{Mg(OH)}_2(s) has Ksp=5.61×10−12K_{sp} = 5.61 \times 10^{-12}, find the minimum initial concentration C0C_0 needed to initiate precipitation.

Answer

After mixing equal volumes, [Mg2+]=C02[\text{Mg}^{2+}] = \frac{C_0}{2} and [OH−]=C02[\text{OH}^-] = \frac{C_0}{2}. The ion product is Q=[Mg2+][OH−]2=(C02)(C02)2=C038Q = [\text{Mg}^{2+}][\text{OH}^-]^2 = \left(\frac{C_0}{2}\right)\left(\frac{C_0}{2}\right)^2 = \frac{C_0^3}{8}. Precipitation requires Q>Ksp  ⟹  C038>5.61×10−12  ⟹  C03>4.488×10−11  ⟹  C0>3.55×10−4 MQ > K_{sp} \implies \frac{C_0^3}{8} > 5.61 \times 10^{-12} \implies C_0^3 > 4.488 \times 10^{-11} \implies C_0 > 3.55 \times 10^{-4}\text{ M}.

Loading workspace…