Resources
In a materials characterization lab, a student performs powder X-ray diffraction (XRD) using radiation () on a synthetic crystalline sample of silicon carbide (, face-centered cubic zinc blende polymorph). The first prominent diffraction peak corresponding to the reflection planes is recorded at an angle of . (a) Using Bragg's law (, with ), calculate the interplanar spacing in angstroms. (b) For a cubic crystal, ; determine the cubic unit cell edge length . (c) If an independent differential scanning calorimetry (DSC) test shows no endothermic melting peak up to the instrument limit of (), explain how this thermodynamic observation corroborates the XRD determination that the substance is a covalent network solid rather than a molecular solid.
Answer and steps
Final answer
(a) Given , . Using Bragg's Law: . (b) For the planes in a cubic lattice: . (c) Molecular solids are held together by weak intermolecular forces (dipole-dipole or London dispersion) and melt well below because disrupting these forces requires minimal thermal energy. The absence of melting up to demonstrates that thermal degradation requires breaking an infinite three-dimensional lattice of localized, covalent bonds (bond enthalpy ), unequivocally corroborating a covalent network structure.
Steps
Part (a): Calculating the Interplanar Spacing
-
Find the Bragg diffraction angle : Diffractometers record data as . Halving this angle gives the incident angle :
Common Pitfall: Forgetting to divide the experimental angle by is the most frequent error in Bragg's law calculations.
-
Apply Bragg's Law: Bragg's Law relates the X-ray wavelength , the order of reflection , and the interplanar spacing :
For first-order diffraction ():
- Substitute the given values:
Part (b): Determining the Cubic Unit Cell Edge Length
- Relate to the cubic lattice parameter : In any cubic crystal system, the spacing between parallel planes with Miller indices is given by:
- Rearrange to solve for for the planes:
- Calculate the numerical value:
Part (c): Thermodynamic Corroboration of a Covalent Network Solid
-
Behavior of Molecular Solids:
- Molecular solids (such as , , or organic crystals) consist of discrete molecules held together exclusively by weak intermolecular forces (London dispersion forces, dipole-dipole attractions, or hydrogen bonds).
- Melting a molecular solid requires overcoming only these weak intermolecular attractions, leaving the intramolecular covalent bonds intact. Consequently, molecular solids typically exhibit low melting temperatures (almost always well below to ).
-
Behavior of Covalent Network Solids:
- In a covalent network solid like silicon carbide (), every atom is bonded to its neighbors in a continuous, three-dimensional framework of strong, directional covalent bonds (e.g., localized bonds).
- Phase change (melting) requires breaking these robust covalent bonds throughout the entire macroscopic crystal. Because the bond dissociation enthalpy of covalent bonds is very high ( for ), an enormous amount of thermal energy is required to disrupt the lattice.
-
Conclusion:
- The absence of an endothermic melting transition up to () confirms that the solid does not consist of discrete molecules held by intermolecular forces. Instead, it definitively confirms a rigid, extended 3D covalent network structure.
Typical errors
01 A student directly substitutes the recorded diffraction angle 2θ into Bragg's law without dividing it by 2 to obtain θ, yielding an erroneously small interplanar spacing and lattice parameter.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Diffractometers record peak positions in terms of the total deflection angle . Bragg's law requires the glancing angle between the incident X-ray beam and the crystal plane, so you must divide by to get before evaluating the sine function.
- Step 2Correct
Your formula is correct, but because was calculated with instead of , the resulting unit cell length inherited that error.
- Step 3
Molecular solids have weak intermolecular forces and melt at relatively low temperatures. Not melting up to indicates a continuous network of strong covalent bonds throughout the crystal lattice, confirming a covalent network solid.
WHAT YOU DID WELL
Compliments from Your TeacherYou selected the correct formula relating the interplanar spacing to the cubic lattice parameter .
You provided a thorough thermodynamic contrast between molecular solids and covalent network solids.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted the full detector angle directly into in Bragg's law.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking that powder XRD data outputs the scattering angle relative to the transmitted beam, whereas Bragg's law defines as the angle between the incident beam and the crystal plane.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check the Angular Variable in XRD Data
XRD diffractogram peaks are always reported as , but Bragg's law uses .
Always write down explicitly before computing .
CORRECTED PATH
ACEpath Teacher's DemonstrationHalve the recorded angle: .
Substitute into Bragg's law: .
Calculate the cubic lattice parameter: .
(a) ; (b) ; (c) The lack of melting up to indicates high bond enthalpy across an infinite 3D covalent lattice, ruling out a molecular solid.
02 A student mistakenly divides the interplanar spacing by the Miller index factor rather than multiplying by it when solving for the unit cell edge length a.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Rearranging for the edge length requires multiplying both sides by , not dividing.
- Step 3
Molecular solids melt easily because intermolecular attractions are weak. Remaining solid beyond requires breaking pervasive strong covalent bonds, corroborating a covalent network structure.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the diffractometer angle into the incident Bragg angle .
You accurately applied Bragg's law to solve for the interplanar spacing .
You correctly contrasted the weak intermolecular forces of molecular solids with the extensive covalent network bonds required to maintain solid structure above .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou divided by instead of multiplying by .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisWhen isolating the numerator from the fraction , you treated the denominator as a multiplying factor on , inadvertently placing the radical in the denominator of the solved expression.
REASONING PATH
Your ACEpath teacher’s suggested approach- Isolating Numerators in Ratios
If , then multiplying both sides by gives .
Always clear the denominator first by multiplying both sides by before substituting numerical values.
- Physical Dimension Sanity Check
For any set of crystal planes , the interplanar spacing must be smaller than or equal to the unit cell edge length (since ).
Check that your calculated unit cell edge length is strictly greater than .
CORRECTED PATH
ACEpath Teacher's DemonstrationMultiply both sides of by to isolate : .
Substitute : .
(a) ; (b) ; (c) Molecular solids melt at low temperatures by overcoming weak intermolecular forces, while covalent network solids require breaking extensive, strong covalent bonds throughout the 3D lattice, explaining why remains solid past .
03 A student uses the angle in degrees directly in a radian-mode calculation of the sine function, yielding a negative and unphysical value for the interplanar spacing.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You evaluated with an incorrect calculator angle mode (or entry error), yielding and an unphysical negative interplanar spacing . In degree mode, , giving .
- Step 3Correct
Your formula for the planes of a cubic crystal is completely correct, but your numerical result carries forward the erroneous negative value of from part (a).
- Step 4
Molecular solids have weak van der Waals forces and melt at low temperatures. A melting point above requires breaking strong covalent bonds throughout the entire structure, which confirms it is a covalent network solid.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly halved the recorded angle to determine the Bragg angle .
You correctly applied the cubic interplanar spacing relationship with .
You accurately contrasted the weak intermolecular forces in molecular solids with the extensive covalent bonding in network solids to interpret the DSC data.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou obtained a negative sine value from entering into a calculator not configured for degree mode, resulting in a negative interplanar spacing.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou did not perform a physical reality check on the calculated geometric quantities. Physical distances such as interplanar spacing and lattice constant must always be positive. Whenever a trigonometric function in Bragg's law yields a negative number or a value outside , verify that the calculator is set to degree mode (DEG).
REASONING PATH
Your ACEpath teacher’s suggested approach- Calculator Angle Mode Check
Diffractometer angles are measured in degrees (). Bragg's law requires evaluating with the calculator set strictly to Degree (DEG) mode.
Before computing , confirm the calculator display shows 'DEG' and verify that for .
- Physical Sanity Check on Spatial Dimensions
Interplanar spacings and unit cell edge lengths are physical lengths and must always be strictly positive and typically on the order of for inorganic crystals.
If a computed lattice dimension is negative or unrealistically small, immediately recheck the sign of and your algebraic rearrangement.
CORRECTED PATH
ACEpath Teacher's DemonstrationEvaluate in degree mode: .
Substitute into Bragg's law (): .
Calculate the cubic lattice parameter : .
(a) ; (b) ; (c) The lack of melting up to indicates that melting requires cleaving strong, directional covalent bonds throughout an extended three-dimensional framework, which is characteristic of a covalent network solid rather than discrete molecules bound by weak intermolecular attractions.
Lock it in
In powder X-ray diffraction, why is the recorded peak position labeled instead of ?
The detector measures the total deflection angle of the diffracted ray relative to the straight-through incident beam, which equals by reflection geometry.
Similar question
Using radiation (), the peak of an unknown crystal appears at . Calculate the interplanar spacing for first-order diffraction ().
Answer
. Key steps: ; ; .
A face-centered cubic metal has its reflection at under X-rays with . Calculate the interplanar spacing and the cubic lattice constant .
Answer
, . Key steps: ; ; .
Diamond is a covalent network solid crystallizing in a cubic lattice with unit cell edge . Using X-rays with , at what angle will the first-order diffraction peak be detected?
Answer
. Key steps: ; ; ; .