Resources

As an electrochemical galvanic cell produces current at constant temperature (T=298 KT = 298\text{ K}), reactants are consumed and products are generated until the system asymptotically reaches thermodynamic equilibrium. For the cell Sn(s)+2Ag+(aq)→Sn2+(aq)+2Ag(s)\text{Sn}(s) + 2\text{Ag}^+(aq) \rightarrow \text{Sn}^{2+}(aq) + 2\text{Ag}(s) with standard potentials E∘(Sn2+/Sn)=−0.138 VE^\circ(\text{Sn}^{2+}/\text{Sn}) = -0.138\text{ V} and E∘(Ag+/Ag)=+0.799 VE^\circ(\text{Ag}^+/\text{Ag}) = +0.799\text{ V}, state the exact asymptotic limiting value of EcellE_{\text{cell}} at dynamic equilibrium, and calculate the thermodynamic equilibrium constant KK for the cell reaction.

Answer and steps

Final answer

At equilibrium: Ecell=0.000 VE_{\text{cell}} = 0.000\text{ V}; Ecell∘=+0.937 VE^\circ_{\text{cell}} = +0.937\text{ V}; K=4.8×1031K = 4.8 \times 10^{31}

Steps

01

Cell Potential at Thermodynamic Equilibrium

As a galvanic cell operates, reactants are converted into products, causing the reaction quotient QQ to increase and the instantaneous cell potential EcellE_{\text{cell}} to decrease according to the Nernst equation:

Ecell=Ecell∘−RTnFln⁡QE_{\text{cell}} = E^\circ_{\text{cell}} - \frac{RT}{nF} \ln Q

At thermodynamic equilibrium:

  • The forward and reverse reaction rates become equal.
  • The system reaches a state of minimum free energy, meaning ΔG=0\Delta G = 0.
  • Because ΔG=−nFEcell\Delta G = -nFE_{\text{cell}}, the driving force drops to zero.

Therefore, the exact asymptotic limiting value of the cell potential at dynamic equilibrium is: Ecell=0.000 VE_{\text{cell}} = 0.000\text{ V}


02

Standard Cell Potential (Ecell∘E^\circ_{\text{cell}})

Separate the overall reaction into oxidation and reduction half-reactions:

  • Reduction (Cathode): AgX+(aq)+eX−→Ag(s)(Ered∘=+0.799 V)\ce{Ag+(aq) + e- -> Ag(s)} \quad (E^\circ_{\text{red}} = +0.799\text{ V})
  • Oxidation (Anode): Sn(s)→SnX2+(aq)+2 eX−(Ered∘=−0.138 V)\ce{Sn(s) -> Sn^{2+}(aq) + 2e-} \quad (E^\circ_{\text{red}} = -0.138\text{ V})

Calculate the standard cell potential: Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} Ecell∘=+0.799 V−(−0.138 V)=+0.937 VE^\circ_{\text{cell}} = +0.799\text{ V} - (-0.138\text{ V}) = +0.937\text{ V}

Important Pitfall: Standard electrode potential E∘E^\circ is an intensive property. Even though the reduction of silver is multiplied by 22 to balance electrons (n=2n = 2), the value of E∘(AgX+/Ag)E^\circ(\ce{Ag+/Ag}) is not multiplied by 22.


03

Calculating the Thermodynamic Equilibrium Constant (KK)

At dynamic equilibrium (T=298 KT = 298\text{ K}), Ecell=0E_{\text{cell}} = 0 and Q=KQ = K. Applying the Nernst equation gives:

0=Ecell∘−0.05916 Vnlog⁡10K0 = E^\circ_{\text{cell}} - \frac{0.05916\text{ V}}{n} \log_{10} K

Rearranging for log⁡10K\log_{10} K with n=2n = 2 electrons transferred:

log⁡10K=nEcell∘0.05916 V\log_{10} K = \frac{n E^\circ_{\text{cell}}}{0.05916\text{ V}} log⁡10K=2⋅0.937 V0.05916 V≈31.677\log_{10} K = \frac{2 \cdot 0.937\text{ V}}{0.05916\text{ V}} \approx 31.677

Solving for KK:

K=1031.677≈4.8×1031K = 10^{31.677} \approx 4.8 \times 10^{31}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the standard cell potential E°_cell with the actual non-standard cell potential E_cell at equilibrium, reporting E°_cell instead of 0 V.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    At equilibrium, Ecell=Ecell∘=0.937 V\text{At equilibrium, } E_{\text{cell}} = E^\circ_{\text{cell}} = 0.937\text{ V}

    Correct

    At dynamic equilibrium, Ecell=0.000 V\text{At dynamic equilibrium, } E_{\text{cell}} = 0.000\text{ V}

    At thermodynamic equilibrium, the chemical driving force of the cell drops to zero because ΔG=0\Delta G = 0. Since ΔG=−nFEcell\Delta G = -nFE_{\text{cell}}, the operational potential EcellE_{\text{cell}} must equal 0.000 V0.000\text{ V}, whereas Ecell∘E^\circ_{\text{cell}} remains a constant +0.937 V+0.937\text{ V}.

  2. Step 2

    Ecell∘=0.799 V−(−0.138 V)=0.937 VE^\circ_{\text{cell}} = 0.799\text{ V} - (-0.138\text{ V}) = 0.937\text{ V}

  3. Step 3

    n=2  ⟹  log⁡K=2(0.937)0.0592=31.66  ⟹  K=4.5×1031n = 2 \implies \log K = \frac{2(0.937)}{0.0592} = 31.66 \implies K = 4.5 \times 10^{31}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that 22 electrons are transferred in the overall redox reaction.

You accurately calculated the standard cell potential Ecell∘=+0.937 VE^\circ_{\text{cell}} = +0.937\text{ V}.

You correctly applied the relationship between Ecell∘E^\circ_{\text{cell}} and the equilibrium constant KK.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing standard cell potential with equilibrium cell potential

You set EcellE_{\text{cell}} equal to Ecell∘E^\circ_{\text{cell}} at equilibrium instead of recognizing that a galvanic cell discharges until Ecell=0 VE_{\text{cell}} = 0\text{ V}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating standard cell potential (Ecell∘E^\circ_{\text{cell}}, a fixed thermodynamic property defined at standard state concentrations of 1 M1\text{ M}) with instantaneous cell potential (EcellE_{\text{cell}}, which continuously drops toward 0 V0\text{ V} as the reaction approaches equilibrium and ΔG→0\Delta G \to 0).

REASONING PATH
Your ACEpath teacher’s suggested approach
Condition for Thermodynamic Equilibrium
  • At equilibrium, ΔG=0\Delta G = 0, which mandates that Ecell=0.000 VE_{\text{cell}} = 0.000\text{ V}.

  • Always set the instantaneous cell potential Ecell=0 VE_{\text{cell}} = 0\text{ V} when a galvanic cell has run to completion/equilibrium.

Standard Potential vs. Operating Potential
  • Ecell∘E^\circ_{\text{cell}} is defined specifically for Q=1Q = 1 (all solutes at 1 M1\text{ M}, gases at 1 bar1\text{ bar}); it does not change as the cell discharges.

  • Keep Ecell∘E^\circ_{\text{cell}} as a fixed value in the Nernst equation 0=Ecell∘−RTnFln⁡K0 = E^\circ_{\text{cell}} - \frac{RT}{nF}\ln K rather than equating EcellE_{\text{cell}} to Ecell∘E^\circ_{\text{cell}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that as current flows, reactants are consumed and products accumulate, causing QQ to increase toward KK.

  2. Apply the equilibrium condition: ΔG=−nFEcell=0\Delta G = -nFE_{\text{cell}} = 0, giving Ecell=0.000 VE_{\text{cell}} = 0.000\text{ V} as the cell is completely discharged (a 'dead battery').

  3. Substitute Ecell=0 VE_{\text{cell}} = 0\text{ V} into the Nernst equation to relate Ecell∘E^\circ_{\text{cell}} to KK: Ecell∘=0.05916 Vnlog⁡10KE^\circ_{\text{cell}} = \frac{0.05916\text{ V}}{n} \log_{10} K.

Final answer

At equilibrium: Ecell=0.000 VE_{\text{cell}} = 0.000\text{ V}; Ecell∘=+0.937 VE^\circ_{\text{cell}} = +0.937\text{ V}; K=4.8×1031K = 4.8 \times 10^{31} (or 4.5×10314.5 \times 10^{31} using 0.0592 V0.0592\text{ V})

NEXT STEPS
Final Takeaways from Your Teacher
  • Always remember that a discharged battery at chemical equilibrium has a voltage reading of Ecell=0 VE_{\text{cell}} = 0\text{ V}.

  • Practice distinguishing between EcellE_{\text{cell}} (variable driving force) and Ecell∘E^\circ_{\text{cell}} (fixed standard-state reference constant).

OverviewACEpath Teacher's Diagnosis

02 The student misidentifies the number of transferred electrons as n = 1 by looking only at the charge on Ag⁺ rather than the balanced redox half-reaction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    At equilibrium, Ecell=0 VE_{\text{cell}} = 0\text{ V}

  2. Step 2

    Ecell∘=0.799 V−(−0.138 V)=0.937 VE^\circ_{\text{cell}} = 0.799\text{ V} - (-0.138\text{ V}) = 0.937\text{ V}

  3. Step 3

    n=1n = 1

    Correct

    n=2n = 2

    In the balanced equation Sn(s)+2AgX+(aq)→SnX2+(aq)+2Ag(s)\ce{Sn}(s) + 2\ce{Ag+}(aq) \rightarrow \ce{Sn^2+}(aq) + 2\ce{Ag}(s), tin loses 2 e−2\text{ e}^- and two silver ions gain a total of 2 e−2\text{ e}^-, so n=2n = 2 electrons are transferred per stoichiometric unit of reaction.

  4. Step 4

    log⁡K=1(0.937)0.0592=15.83  ⟹  K=6.7×1015\log K = \frac{1(0.937)}{0.0592} = 15.83 \implies K = 6.7 \times 10^{15}

    Correct

    log⁡10K=nEcell∘0.05916 V=2(0.937 V)0.05916 V≈31.68  ⟹  K≈4.8×1031\log_{10} K = \frac{n E^\circ_{\text{cell}}}{0.05916\text{ V}} = \frac{2(0.937\text{ V})}{0.05916\text{ V}} \approx 31.68 \implies K \approx 4.8 \times 10^{31}

    Your algebraic setup and substitution followed correctly from your value of nn, but your final result for KK was off because n=1n = 1 was substituted instead of n=2n = 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that an operating galvanic cell reaches Ecell=0 VE_{\text{cell}} = 0\text{ V} at thermodynamic equilibrium.

You accurately calculated Ecell∘E^\circ_{\text{cell}} from the given standard reduction potentials.

You selected the correct relationship between Ecell∘E^\circ_{\text{cell}} and the equilibrium constant KK.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect electron transfer number (n)

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You likely looked only at the single charge on a single AgX+\ce{Ag+} ion rather than tracking the total number of electrons exchanged in the balanced overall redox equation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Balancing Electron Transfer
  • The value of nn in electrochemistry equations must always be the total number of moles of electrons transferred in the balanced overall reaction.

  • Always write out both balanced half-reactions with their electrons explicitly shown: Sn→SnX2++2 eX−\ce{Sn -> Sn^2+ + 2e-} and 2AgX++2 eX−→2 Ag2\ce{Ag+ + 2e- -> 2Ag}. The coefficient in front of eX−\ce{e-} in either balanced half-reaction gives nn.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the reduction half-reaction: 2AgX+(aq)+2eX−→2Ag(s)2\ce{Ag+}(aq) + 2\ce{e-} \rightarrow 2\ce{Ag}(s), which consumes 2 e−2\text{ e}^-.

  2. Write the oxidation half-reaction: Sn(s)→Sn2+(aq)+2eX−\ce{Sn}(s) \rightarrow \ce{Sn}^{2+}(aq) + 2\ce{e-}, which releases 2 e−2\text{ e}^-. Therefore, n=2n = 2.

  3. Substitute n=2n = 2 into the equilibrium relation: log⁡10K=2×0.937 V0.05916 V≈31.677\log_{10} K = \frac{2 \times 0.937\text{ V}}{0.05916\text{ V}} \approx 31.677.

  4. Evaluate K=1031.677≈4.8×1031K = 10^{31.677} \approx 4.8 \times 10^{31}.

Final answer

Ecell=0.000 VE_{\text{cell}} = 0.000\text{ V}; K=4.8×1031K = 4.8 \times 10^{31}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before substituting into Nernst or equilibrium formulas, explicitly split the overall equation into oxidation and reduction half-reactions.

  • Verify that the number of electrons cancelled when combining the two half-reactions matches your assigned nn.

OverviewACEpath Teacher's Diagnosis

03 The student mistakenly multiplies the standard reduction potential of the silver half-cell by 2 because of the stoichiometric coefficient in the balanced equation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    At equilibrium, Ecell=0 V\text{At equilibrium, } E_{\text{cell}} = 0\text{ V}

  2. Step 2

    Ecell∘=2(0.799 V)−(−0.138 V)=1.736 VE^\circ_{\text{cell}} = 2(0.799\text{ V}) - (-0.138\text{ V}) = 1.736\text{ V}

    Correct

    Ecell∘=Ecathode∘−Eanode∘=+0.799 V−(−0.138 V)=+0.937 VE^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = +0.799\text{ V} - (-0.138\text{ V}) = +0.937\text{ V}

    You multiplied the reduction potential of AgX+\ce{Ag+} by 22. Standard electrode potential (E∘E^\circ) is an intensive property, meaning it does not depend on the stoichiometric coefficients in the balanced equation.

  3. Step 3

    n=2  ⟹  log⁡K=2(1.736)0.0592=58.65n = 2 \implies \log K = \frac{2(1.736)}{0.0592} = 58.65

    Correct

    log⁡10K=nEcell∘0.05916 V=2(0.937 V)0.05916 V≈31.68\log_{10} K = \frac{n E^\circ_{\text{cell}}}{0.05916\text{ V}} = \frac{2(0.937\text{ V})}{0.05916\text{ V}} \approx 31.68

    You correctly identified n=2n = 2 and applied the equilibrium form of the Nernst equation, but this step carries forward the incorrect standard cell potential from Step 2.

  4. Step 4

    K=4.5×1058K = 4.5 \times 10^{58}

    Correct

    K=1031.68≈4.8×1031K = 10^{31.68} \approx 4.8 \times 10^{31}

    You computed 10log⁡K10^{\log K} correctly based on your previous value, but the final numerical value is affected by the earlier calculation of Ecell∘E^\circ_{\text{cell}}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the instantaneous cell potential EcellE_{\text{cell}} equals 0 V0\text{ V} at equilibrium.

You identified the correct number of moles of electrons transferred (n=2n = 2).

You correctly set up the relationship between Ecell∘E^\circ_{\text{cell}} and the equilibrium constant KK using the Nernst equation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Intensive property scaling error

No, this reflects a conceptual misunderstanding of the intensive nature of reduction potentials.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated standard reduction potential E∘E^\circ as an extensive quantity (like enthalpy ΔH∘\Delta H^\circ or Gibbs free energy ΔG∘\Delta G^\circ), multiplying it by the stoichiometric coefficient of 22. Because electric potential represents energy per unit charge (Joules per Coulomb), changing the stoichiometric multiplier scales both the energy change (ΔG∘\Delta G^\circ) and the charge transferred (nFnF) proportionally, leaving the potential E∘=−ΔG∘nFE^\circ = -\frac{\Delta G^\circ}{nF} unchanged.

REASONING PATH
Your ACEpath teacher’s suggested approach
Standard Potential is Intensive
  • E∘E^\circ never scales with stoichiometric coefficients because it measures electric potential (volts = joules per coulomb).

  • Keep the tabulated reduction potential exactly as listed, regardless of how many times the half-reaction is multiplied to balance electrons.

Stoichiometric Adjustment in Nernst Equation
  • Electron stoichiometry is accounted for solely by the factor nn in ΔG∘=−nFE∘\Delta G^\circ = -nFE^\circ and log⁡K=nE∘0.05916 V\log K = \frac{n E^\circ}{0.05916\text{ V}}.

  • Use the unscaled E∘E^\circ values to find Ecell∘E^\circ_{\text{cell}}, and place the electron count only into nn.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the standard cell potential without multiplying by stoichiometric coefficients: Ecell∘=Ecathode∘−Eanode∘=+0.799 V−(−0.138 V)=+0.937 VE^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = +0.799\text{ V} - (-0.138\text{ V}) = +0.937\text{ V}.

  2. Substitute the correct standard cell potential and n=2n = 2 into the equilibrium relation: log⁡10K=2×0.937 V0.05916 V≈31.677\log_{10} K = \frac{2 \times 0.937\text{ V}}{0.05916\text{ V}} \approx 31.677.

  3. Solve for the equilibrium constant: K=1031.677≈4.8×1031K = 10^{31.677} \approx 4.8 \times 10^{31}.

Final answer

At equilibrium: Ecell=0.000 VE_{\text{cell}} = 0.000\text{ V}; Ecell∘=+0.937 VE^\circ_{\text{cell}} = +0.937\text{ V}; K=4.8×1031K = 4.8 \times 10^{31}

NEXT STEPS
Final Takeaways from Your Teacher
  • Remember that standard electrode potentials (E∘E^\circ) are intensive and never multiplied by stoichiometric coefficients.

  • Double-check that stoichiometry is only accounted for in the electron transfer number nn.

  • Practice distinguishing between intensive properties (E∘E^\circ, TT, density) and extensive properties (ΔH∘\Delta H^\circ, ΔG∘\Delta G^\circ, mass).

Lock it in

Similar question

01

A galvanic cell based on the reaction Zn(s)+CuX2+(aq)→ZnX2+(aq)+Cu(s)\ce{Zn(s) + Cu^2+(aq) -> Zn^2+(aq) + Cu(s)} operates until dynamic equilibrium is reached at 298 K298\text{ K}. Given E∘(ZnX2+/Zn)=−0.763 VE^\circ(\ce{Zn^2+/Zn}) = -0.763\text{ V} and E∘(CuX2+/Cu)=+0.340 VE^\circ(\ce{Cu^2+/Cu}) = +0.340\text{ V}, state EcellE_{\text{cell}} at equilibrium and determine Ecell∘E^\circ_{\text{cell}}.

Answer

Ecell=0.000 VE_{\text{cell}} = 0.000\text{ V} at equilibrium because the cell is fully discharged and ΔG=0\Delta G = 0. Ecell∘=Ecathode∘−Eanode∘=0.340 V−(−0.763 V)=+1.103 VE^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = 0.340\text{ V} - (-0.763\text{ V}) = +1.103\text{ V}.

02

For the cell reaction Cd(s)+FeX2+(aq)→CdX2+(aq)+Fe(s)\ce{Cd(s) + Fe^2+(aq) -> Cd^2+(aq) + Fe(s)}, the standard cell potential is Ecell∘=−0.040 VE^\circ_{\text{cell}} = -0.040\text{ V} at 298 K298\text{ K}. If the system is allowed to establish equilibrium, what is the equilibrium cell potential EcellE_{\text{cell}}, and what is the value of the equilibrium constant KK? (n=2n=2, use 0.0592 V0.0592\text{ V})

Answer

Ecell=0.000 VE_{\text{cell}} = 0.000\text{ V} at equilibrium. Using log⁡K=nEcell∘0.0592 V=2(−0.040)0.0592=−1.351\log K = \frac{n E^\circ_{\text{cell}}}{0.0592\text{ V}} = \frac{2(-0.040)}{0.0592} = -1.351, we get K=10−1.351≈4.5×10−2K = 10^{-1.351} \approx 4.5 \times 10^{-2}.

03

A concentration cell consists of two hydrogen electrodes at 298 K298\text{ K}: one with [HX+]=1.0 M[\ce{H+}] = 1.0\text{ M} and the other with [HX+]=1.0×10−4 M[\ce{H+}] = 1.0 \times 10^{-4}\text{ M}. Calculate the initial non-standard potential EcellE_{\text{cell}}, the standard cell potential Ecell∘E^\circ_{\text{cell}}, and the asymptotic value of EcellE_{\text{cell}} after operating until equilibrium.

Answer

For a concentration cell, standard states in both half-cells are identical, so Ecell∘=0.000 VE^\circ_{\text{cell}} = 0.000\text{ V}. Initially, Ecell=E∘−0.05922log⁡10−81.0=0−0.05922(−8)=+0.237 VE_{\text{cell}} = E^\circ - \frac{0.0592}{2}\log\frac{10^{-8}}{1.0} = 0 - \frac{0.0592}{2}(-8) = +0.237\text{ V}. At dynamic equilibrium, concentrations equalize, giving Ecell=0.000 VE_{\text{cell}} = 0.000\text{ V}.

Loading workspace…