Resources

An analytical chemist measures the temperature change in a calorimeter as ΔT=Tfinal−Tinitial\Delta T = T_{\text{final}} - T_{\text{initial}}, where Tinitial=21.40±0.05 ∘CT_{\text{initial}} = 21.40 \pm 0.05\,^\circ\text{C} and Tfinal=23.80±0.05 ∘CT_{\text{final}} = 23.80 \pm 0.05\,^\circ\text{C}. A student mistakenly claims that because the individual temperatures are known to 44 significant figures, their difference must also possess 44 significant figures. Calculate the true value of ΔT\Delta T and its propagated absolute uncertainty δ(ΔT)=(δTinitial)2+(δTfinal)2\delta(\Delta T) = \sqrt{(\delta T_{\text{initial}})^2 + (\delta T_{\text{final}})^2}, and report the result with the correct number of significant figures.

Answer and steps

Final answer

ΔT=(2.40±0.07) ∘C\Delta T = (2.40 \pm 0.07)\,^\circ\text{C} (possessing 33 significant figures and 22 decimal places)

Steps

01

Calculate the Temperature Difference (ΔT\Delta T)

Subtract the initial temperature from the final temperature: ΔT=Tfinal−Tinitial=23.80 ∘C−21.40 ∘C=2.40 ∘C\Delta T = T_{\text{final}} - T_{\text{initial}} = 23.80\,^\circ\text{C} - 21.40\,^\circ\text{C} = 2.40\,^\circ\text{C}

02

Determine Significant Figures using the Addition/Subtraction Rule

  • For addition and subtraction, the precision of the result is governed by decimal places (positional uncertainty), not by total significant figures.
  • Both Tfinal=23.80 ∘CT_{\text{final}} = 23.80\,^\circ\text{C} and Tinitial=21.40 ∘CT_{\text{initial}} = 21.40\,^\circ\text{C} have 22 decimal places (precise to the hundredths place).
  • Therefore, ΔT\Delta T must also be expressed to 22 decimal places: 2.40 ∘C2.40\,^\circ\text{C}.
  • Counting the significant digits in 2.402.40 gives 33 significant figures (the digits 22, 44, and the trailing zero 00).

Common Pitfall: Assuming that subtracting two numbers with 44 significant figures always yields a result with 44 significant figures. When two close values are subtracted, the leading digits cancel out, reducing the total count of significant figures even though precision in decimal places is preserved.


03

Calculate the Propagated Absolute Uncertainty

Using the independent error propagation formula for addition and subtraction: δ(ΔT)=(δTinitial)2+(δTfinal)2\delta(\Delta T) = \sqrt{(\delta T_{\text{initial}})^2 + (\delta T_{\text{final}})^2}

Substitute δTinitial=0.05 ∘C\delta T_{\text{initial}} = 0.05\,^\circ\text{C} and δTfinal=0.05 ∘C\delta T_{\text{final}} = 0.05\,^\circ\text{C}: δ(ΔT)=(0.05)2+(0.05)2=0.0025+0.0025=0.0050≈0.0707 ∘C\delta(\Delta T) = \sqrt{(0.05)^2 + (0.05)^2} = \sqrt{0.0025 + 0.0025} = \sqrt{0.0050} \approx 0.0707\,^\circ\text{C}

Rounding to match the measurement's hundredths place gives: δ(ΔT)≈0.07 ∘C\delta(\Delta T) \approx 0.07\,^\circ\text{C}


04

Final Reported Value

Combining the central value and its absolute uncertainty: ΔT=(2.40±0.07) ∘C\Delta T = (2.40 \pm 0.07)\,^\circ\text{C} The reported value possesses 33 significant figures and is specified to 22 decimal places.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student directly adds absolute uncertainties instead of adding them in quadrature, yielding an overestimated uncertainty of ±0.10 °C.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔT=23.80−21.40=2.40 ∘C\Delta T = 23.80 - 21.40 = 2.40\,^\circ\text{C}

  2. Step 2

    δ(ΔT)=0.05+0.05=0.10 ∘C\delta(\Delta T) = 0.05 + 0.05 = 0.10\,^\circ\text{C}

    Correct

    δ(ΔT)=(0.05)2+(0.05)2≈0.07 ∘C\delta(\Delta T) = \sqrt{(0.05)^2 + (0.05)^2} \approx 0.07\,^\circ\text{C}

    You added the uncertainties directly rather than adding them in quadrature using δ(ΔT)=(δTinitial)2+(δTfinal)2\delta(\Delta T) = \sqrt{(\delta T_{\text{initial}})^2 + (\delta T_{\text{final}})^2}.

  3. Step 3

    ΔT=2.40±0.10 ∘C\Delta T = 2.40 \pm 0.10\,^\circ\text{C}

    Correct

    ΔT=(2.40±0.07) ∘C\Delta T = (2.40 \pm 0.07)\,^\circ\text{C} (33 significant figures, 22 decimal places)

    Because the uncertainty calculated in Step 2 was overestimated, your final reported interval inherited that incorrect uncertainty value.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the correct central value of ΔT=2.40 ∘C\Delta T = 2.40\,^\circ\text{C}.

You correctly followed the decimal place rule for subtraction to keep two decimal places.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear addition of independent uncertainties instead of quadrature

You summed the uncertainties directly (0.05+0.050.05 + 0.05) as if determining a worst-case bound, rather than using the root-sum-square method specified for independent random errors.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing worst-case error bounds (direct sum) with standard Gaussian error propagation for independent measurements, where uncertainties combine in quadrature via (δA)2+(δB)2\sqrt{(\delta A)^2 + (\delta B)^2}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Quadrature for Independent Errors
  • For independent random errors in sums and differences z=x±yz = x \pm y, propagate absolute uncertainty as δz=(δx)2+(δy)2\delta z = \sqrt{(\delta x)^2 + (\delta y)^2}.

  • Always square each individual uncertainty, sum the squares, and take the square root.

Significant Figures in Subtraction
  • Subtraction limits precision by decimal places (positional uncertainty), which often reduces the total count of significant figures.

  • Count decimal places for the subtraction, then count total significant figures in the resulting number.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute the uncertainties into the quadrature formula: δ(ΔT)=(0.05 ∘C)2+(0.05 ∘C)2=0.0025+0.0025 ∘C=0.0050 ∘C≈0.0707 ∘C\delta(\Delta T) = \sqrt{(0.05\,^\circ\text{C})^2 + (0.05\,^\circ\text{C})^2} = \sqrt{0.0025 + 0.0025}\,^\circ\text{C} = \sqrt{0.0050}\,^\circ\text{C} \approx 0.0707\,^\circ\text{C}.

  2. Round the absolute uncertainty to match the measurement precision (hundredths place): δ(ΔT)≈0.07 ∘C\delta(\Delta T) \approx 0.07\,^\circ\text{C}.

Final answer

ΔT=(2.40±0.07) ∘C\Delta T = (2.40 \pm 0.07)\,^\circ\text{C} (possessing 33 significant figures and 22 decimal places)

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the difference between worst-case error (∣δA∣+∣δB∣|\delta A| + |\delta B|) and standard Gaussian propagation (root-sum-of-squares).

  • Practice rounding uncertainties to match the least significant decimal position of the central value.

OverviewACEpath Teacher's Diagnosis

02 The student assumes subtraction preserves four significant figures by padding the difference with an extra zero to make 2.400 °C.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔT=23.80−21.40=2.400 ∘C\Delta T = 23.80 - 21.40 = 2.400\,^\circ\text{C}

    Correct

    ΔT=23.80−21.40=2.40 ∘C\Delta T = 23.80 - 21.40 = 2.40\,^\circ\text{C}

    You calculated the difference as 2.400 ∘C2.400\,^\circ\text{C} by padding an extra zero to maintain 44 significant figures. For addition and subtraction, precision is limited by the least number of decimal places (hundredths place, 22 decimal places), yielding 2.40 ∘C2.40\,^\circ\text{C} with 33 significant figures.

  2. Step 2

    δ(ΔT)=(0.05)2+(0.05)2=0.0050=0.07 ∘C\delta(\Delta T) = \sqrt{(0.05)^2 + (0.05)^2} = \sqrt{0.0050} = 0.07\,^\circ\text{C}

  3. Step 3

    ΔT=2.400±0.07 ∘C\Delta T = 2.400 \pm 0.07\,^\circ\text{C}

    Correct

    ΔT=(2.40±0.07) ∘C\Delta T = (2.40 \pm 0.07)\,^\circ\text{C}

    Your final reported value carried over the erroneous third decimal place from Step 1. The central value and its absolute uncertainty must match at the hundredths place.

WHAT YOU DID WELL
Compliments from Your Teacher

You used the correct error propagation formula for the difference of two independent quantities.

You correctly calculated and rounded the uncertainty to 0.07 ∘C0.07\,^\circ\text{C}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Significant figures in subtraction vs decimal places

You padded the central value with a thousandths digit (00) to force four significant figures.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the addition/subtraction significant figure rule with the multiplication/division rule. Addition and subtraction are governed by decimal places (place value of the least precise term), not by the total count of significant figures.

REASONING PATH
Your ACEpath teacher’s suggested approach
Rule of Decimal Places
  • For addition and subtraction, the final value matches the least number of decimal places among the inputs, not the total number of significant figures.

  • Check the position of the last significant digit in each input value before reporting the result.

Uncertainty Alignment
  • The reported central value and its absolute uncertainty must terminate at the same decimal place.

  • Ensure that if δ(ΔT)\delta(\Delta T) is rounded to the hundredths place (0.070.07), ΔT\Delta T is also reported to the hundredths place (2.402.40, not 2.4002.400).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Evaluate the subtraction: 23.80−21.40=2.4023.80 - 21.40 = 2.40. Both inputs are precise to the hundredths place (22 decimal places), so ΔT=2.40 ∘C\Delta T = 2.40\,^\circ\text{C} (33 significant figures).

  2. Retain the uncertainty calculated in Step 2: δ(ΔT)=0.07 ∘C\delta(\Delta T) = 0.07\,^\circ\text{C}.

  3. Combine into the final measurement: (2.40±0.07) ∘C(2.40 \pm 0.07)\,^\circ\text{C}.

Final answer

ΔT=(2.40±0.07) ∘C\Delta T = (2.40 \pm 0.07)\,^\circ\text{C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinct rounding rules: decimal places for addition/subtraction versus total significant figures for multiplication/division.

  • Practice matching the decimal place of an absolute uncertainty with the decimal place of the central value.

OverviewACEpath Teacher's Diagnosis

03 The student rounds the difference to one significant figure because the uncertainty is reported to one significant figure (0.07 °C), incorrectly writing 2.4 °C instead of matching the hundredths decimal place.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔT=23.80−21.40=2.40 ∘C\Delta T = 23.80 - 21.40 = 2.40\,^\circ\text{C}

  2. Step 2

    δ(ΔT)=(0.05)2+(0.05)2=0.0050≈0.07 ∘C\delta(\Delta T) = \sqrt{(0.05)^2 + (0.05)^2} = \sqrt{0.0050} \approx 0.07\,^\circ\text{C}

  3. Step 3

    ΔT=2.4±0.07 ∘C\Delta T = 2.4 \pm 0.07\,^\circ\text{C}

    Correct

    ΔT=(2.40±0.07) ∘C\Delta T = (2.40 \pm 0.07)\,^\circ\text{C}

    You dropped the trailing zero from 2.402.40, changing its precision to the tenths place. The central value must match the least significant decimal position of the stated uncertainty (hundredths place).

WHAT YOU DID WELL
Compliments from Your Teacher

You subtracted the initial temperature from the final temperature correctly.

You used the correct root-sum-of-squares formula for propagating independent uncertainties during subtraction.

You preserved the trailing zero in your intermediate step to show three significant figures.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Decimal place mismatch between central value and uncertainty

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You likely treated the trailing zero as insignificant or attempted to adjust significant figures based on the uncertainty having one non-zero digit, overlooking the rule that the central value and the absolute uncertainty must always share the same last decimal position.

REASONING PATH
Your ACEpath teacher’s suggested approach
Matching Decimal Position
  • The final reported value and its absolute uncertainty must always terminate at the exact same decimal place.

  • Since δ(ΔT)=0.07 ∘C\delta(\Delta T) = 0.07\,^\circ\text{C} is known to the hundredths place (two decimal places), report the central value as 2.40 ∘C2.40\,^\circ\text{C}, keeping the trailing zero.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Align the central value ΔT=2.40 ∘C\Delta T = 2.40\,^\circ\text{C} with the uncertainty δ(ΔT)=0.07 ∘C\delta(\Delta T) = 0.07\,^\circ\text{C}. Both are precise to the hundredths place.

  2. Write the final measurement showing matching decimal places: ΔT=(2.40±0.07) ∘C\Delta T = (2.40 \pm 0.07)\,^\circ\text{C}.

Final answer

ΔT=(2.40±0.07) ∘C\Delta T = (2.40 \pm 0.07)\,^\circ\text{C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always check that the last digit of your reported measurement occupies the exact same decimal column as the last digit of your absolute uncertainty.

  • Remember that trailing zeros after a decimal point are significant and communicate measurement precision; never drop them when stating a value with experimental uncertainty.

Lock it in

Similar question

01

A student measures an initial mass m1=45.20±0.03 gm_1 = 45.20 \pm 0.03\,\text{g} and a final mass m2=48.60±0.04 gm_2 = 48.60 \pm 0.04\,\text{g}. Calculate the mass change Δm=m2−m1\Delta m = m_2 - m_1 and its propagated uncertainty δ(Δm)\delta(\Delta m).

Answer

Δm=48.60−45.20=3.40 g\Delta m = 48.60 - 45.20 = 3.40\,\text{g}. Propagated uncertainty δ(Δm)=(0.03)2+(0.04)2=0.0009+0.0016=0.05 g\delta(\Delta m) = \sqrt{(0.03)^2 + (0.04)^2} = \sqrt{0.0009 + 0.0016} = 0.05\,\text{g}. Reported as (3.40±0.05) g(3.40 \pm 0.05)\,\text{g} (33 significant figures).

02

Two burette readings are Vinitial=1.25±0.02 mLV_{\text{initial}} = 1.25 \pm 0.02\,\text{mL} and Vfinal=11.25±0.02 mLV_{\text{final}} = 11.25 \pm 0.02\,\text{mL}. Find the delivered volume V=Vfinal−VinitialV = V_{\text{final}} - V_{\text{initial}}, its propagated absolute uncertainty, and state the number of significant figures.

Answer

V=11.25−1.25=10.00 mLV = 11.25 - 1.25 = 10.00\,\text{mL} (22 decimal places, 44 significant figures). Propagated uncertainty δV=(0.02)2+(0.02)2=0.0008≈0.03 mL\delta V = \sqrt{(0.02)^2 + (0.02)^2} = \sqrt{0.0008} \approx 0.03\,\text{mL}. Reported as (10.00±0.03) mL(10.00 \pm 0.03)\,\text{mL}.

03

An experiment records x=100.5±0.6x = 100.5 \pm 0.6 and y=98.2±0.8y = 98.2 \pm 0.8. Compute the difference d=x−yd = x - y with its propagated uncertainty. How many significant figures does dd have, and why did the count drop from the original values?

Answer

d=100.5−98.2=2.3d = 100.5 - 98.2 = 2.3. Uncertainty δd=0.62+0.82=1.0\delta d = \sqrt{0.6^2 + 0.8^2} = 1.0. Reported as 2.3±1.02.3 \pm 1.0. The value 2.32.3 has 22 significant figures. The count dropped because subtracting close values cancels leading significant digits while preserving decimal place precision.

Loading workspace…