Resources

An analytical chemist standardizes an unknown bronze alloy containing copper (CuCu, molar mass 63.55 g/mol63.55\text{ g}/\text{mol}) and tin (SnSn, molar mass 118.71 g/mol118.71\text{ g}/\text{mol}). In substitutional alloys, solute atoms replace solvent atoms directly in the metallic lattice, altering the delocalized electron sea density and mechanical hardness. A 1.500 g1.500\text{ g} sample of the bronze is completely dissolved in concentrated nitric acid and analyzed via iodometric titration for copper. The titration of the generated I2I_2 requires 38.45 mL38.45\text{ mL} of 0.5000 M Na2S2O30.5000\text{ M}\text{ Na}_2\text{S}_2\text{O}_3 solution to reach the starch end point according to the stoichiometry 2 Cu2++4 I−→2 CuI(s)+I22\text{ Cu}^{2+} + 4\text{ I}^- \to 2\text{ CuI}_{(s)} + \text{I}_2 and I2+2 S2O32−→2 I−+S4O62−\text{I}_2 + 2\text{ S}_2\text{O}_3^{2-} \to 2\text{ I}^- + \text{S}_4\text{O}_6^{2-}. Calculate: (a) the mass percent of copper and tin in the alloy; and (b) using the electron sea model, explain why substituting larger SnSn atoms into the CuCu lattice makes bronze significantly harder and less malleable than pure copper.

Answer and steps

Final answer

(a) Moles of Cu=0.01923 molCu = 0.01923\text{ mol}; Mass of Cu=1.222 gCu = 1.222\text{ g}; Mass % Cu=81.47%Cu = 81.47\%; Mass % Sn=18.53%Sn = 18.53\%; (b) In pure copper, uniform-sized Cu+Cu^+ cation cores form regular, smooth crystal planes that readily slip past one another within the flexible electron sea under shear stress. The incorporation of larger SnSn solute atoms disrupts the regular crystal lattice geometry, creating local lattice strain and atomic corrugations that pin dislocations and obstruct planes of cations from sliding easily, thereby significantly increasing yield strength and hardness while reducing malleability.

Steps

Part (a): Determining the Mass Percent of Copper and Tin

Step 1: Relate moles of thiosulfate to moles of copper From the balanced chemical equations:

  1. 2CuX2++4IX−→2CuI(s)+IX22\ce{Cu^2+} + 4\ce{I^-} \to 2\ce{CuI}_{(s)} + \ce{I2} indicates that 2 mol of CuX2+2\text{ mol of }\ce{Cu^2+} produces 1 mol of IX21\text{ mol of }\ce{I2}.
  2. IX2+2SX2OX3X2−→2IX−+SX4OX6X2−\ce{I2} + 2\ce{S2O3^2-} \to 2\ce{I^-} + \ce{S4O6^2-} indicates that 1 mol of IX21\text{ mol of }\ce{I2} reacts with 2 mol of SX2OX3X2−2\text{ mol of }\ce{S2O3^2-}.

Combining these stoichiometric relationships gives a direct 1:11:1 molar ratio between copper and thiosulfate: nCu=nCuX2+=nSX2OX3X2−n_{\ce{Cu}} = n_{\ce{Cu^2+}} = n_{\ce{S2O3^2-}}

Step 2: Calculate the moles and mass of copper Multiply the molarity and volume of the NaX2SX2OX3\ce{Na2S2O3} solution: nSX2OX3X2−=M⋅V=(0.5000 mol/L)⋅(0.03845 L)=0.019225 mol≈0.01923 moln_{\ce{S2O3^2-}} = M \cdot V = (0.5000\text{ mol/L}) \cdot (0.03845\text{ L}) = 0.019225\text{ mol} \approx 0.01923\text{ mol}

Using the molar mass of copper (63.55 g/mol63.55\text{ g/mol}): mCu=nCu⋅MCu=0.019225 mol⋅63.55 g/mol≈1.222 gm_{\ce{Cu}} = n_{\ce{Cu}} \cdot M_{\ce{Cu}} = 0.019225\text{ mol} \cdot 63.55\text{ g/mol} \approx 1.222\text{ g}

Step 3: Calculate the mass percentages Determine the mass percentage of copper in the 1.500 g1.500\text{ g} bronze sample: Mass % Cu=mCumalloy⋅100%=1.222 g1.500 g⋅100%=81.47%\text{Mass \% }\ce{Cu} = \frac{m_{\ce{Cu}}}{m_{\text{alloy}}} \cdot 100\% = \frac{1.222\text{ g}}{1.500\text{ g}} \cdot 100\% = 81.47\%

Assuming a binary alloy of copper and tin, the remaining mass percent is tin: Mass % Sn=100.00%−81.47%=18.53%\text{Mass \% }\ce{Sn} = 100.00\% - 81.47\% = 18.53\%


Part (b): Explaining the Mechanical Properties via the Electron Sea Model

  1. Structure of Pure Copper:

    • In the electron sea model, pure metallic copper consists of an orderly lattice of identical copper cation cores surrounded by a delocalized "sea" of mobile valence electrons.
    • Because the metal cations are uniform in size and the non-directional metallic bonds do not break when atoms move, smooth, parallel atomic planes slide over one another easily under shear stress (slip), making pure copper soft, malleable, and ductile.
  2. Role of Substitutional Tin Atoms in Bronze:

    • Tin (Sn\ce{Sn}) has a significantly larger atomic radius than copper (Cu\ce{Cu}).
    • When larger Sn\ce{Sn} solute atoms randomly substitute for Cu\ce{Cu} atoms in the crystal lattice, they distort the uniform packing geometry and create local lattice strain.
    • These structural corrugations pin dislocations and prevent layers of metal atoms from sliding smoothly past each other.
    • As a result, substantially greater mechanical force is required to deform the lattice, making bronze noticeably harder and less malleable than pure copper.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misinterprets the coupled stoichiometric equations and assumes a 2:1 ratio of Cu²⁺ to S2O3²⁻ instead of 1:1, doubling the calculated copper amount.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n(S2O32−)=0.03845 L×0.5000 M=0.019225 moln(\text{S}_2\text{O}_3^{2-}) = 0.03845\text{ L} \times 0.5000\text{ M} = 0.019225\text{ mol}

  2. Step 2

    n(Cu2+)=2×n(S2O32−)=0.03845 moln(\text{Cu}^{2+}) = 2 \times n(\text{S}_2\text{O}_3^{2-}) = 0.03845\text{ mol}

    Correct

    n(Cu2+)=n(S2O32−)=0.019225 moln(\text{Cu}^{2+}) = n(\text{S}_2\text{O}_3^{2-}) = 0.019225\text{ mol}

    You multiplied the moles of thiosulfate by 22 instead of equating them. From the coupled equations, 2 mol Cu2+2\text{ mol }\text{Cu}^{2+} produces 1 mol I21\text{ mol }\text{I}_2, and 1 mol I21\text{ mol }\text{I}_2 reacts with 2 mol S2O32−2\text{ mol }\text{S}_2\text{O}_3^{2-}. This yields an overall stoichiometric ratio of 2 Cu2+:2 S2O32−2\text{ Cu}^{2+} : 2\text{ S}_2\text{O}_3^{2-}, or 1:11:1.

  3. Step 3

    m(Cu)=0.03845 mol×63.55 g/mol=2.444 g  ⟹  %Cu=(2.444 g1.500 g)×100%=162.9%  ⟹  %Sn=100%−162.9%=−62.9%m(\text{Cu}) = 0.03845\text{ mol} \times 63.55\text{ g/mol} = 2.444\text{ g} \implies \%\text{Cu} = \left(\frac{2.444\text{ g}}{1.500\text{ g}}\right) \times 100\% = 162.9\% \implies \%\text{Sn} = 100\% - 162.9\% = -62.9\%

    Correct

    m(Cu)=0.019225 mol×63.55 g/mol=1.222 g  ⟹  %Cu=81.47%  ⟹  %Sn=18.53%m(\text{Cu}) = 0.019225\text{ mol} \times 63.55\text{ g/mol} = 1.222\text{ g} \implies \%\text{Cu} = 81.47\% \implies \%\text{Sn} = 18.53\%

    Your arithmetic and formulas were followed properly, but the doubled mole quantity propagated into an impossible copper mass (2.444 g2.444\text{ g} in a 1.500 g1.500\text{ g} sample) and negative tin percentage.

  4. Step 4

    In pure copper, uniform metal cations form neat rows that slide past one another easily through the electron sea. Substituting larger Sn\text{Sn} atoms disrupts the regular lattice arrangement and creates distortions that hinder atom layers from slipping past each other, increasing hardness.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the moles of thiosulfate titrant from its concentration and volume.

You clearly explained how larger substitutional atoms distort the metallic lattice and pin atomic planes against slip.

You correctly set up the mass percentage formulas using the total alloy sample mass.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometric Ratio Error in Coupled Reactions

You inverted or miscombined the intermediate molar ratios, multiplying by 22 rather than canceling the intermediate I2\text{I}_2 factor.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When linking multi-step coupled reactions, you looked at the coefficient of 22 on Cu2+\text{Cu}^{2+} and directly multiplied the thiosulfate moles by 22, without chaining the intermediate mole bridge: 2 mol Cu2+1 mol I2×1 mol I22 mol S2O32−=1\frac{2\text{ mol }\text{Cu}^{2+}}{1\text{ mol }\text{I}_2} \times \frac{1\text{ mol }\text{I}_2}{2\text{ mol }\text{S}_2\text{O}_3^{2-}} = 1. A quick physical sanity check (a component mass cannot exceed the sample mass of 1.500 g1.500\text{ g}) would have signaled the mistake immediately.

REASONING PATH
Your ACEpath teacher’s suggested approach
Chain Intermediate Species Using Dimensional Analysis
  • mol target=mol titrant×coeff intermediatecoeff titrant×coeff targetcoeff intermediate\text{mol target} = \text{mol titrant} \times \frac{\text{coeff intermediate}}{\text{coeff titrant}} \times \frac{\text{coeff target}}{\text{coeff intermediate}}

  • Write out the full unit cancellation with the shared intermediate species before writing a direct mole-to-mole formula.

Perform a Physical Bounds Check
  • 0%≤Mass %≤100%0\% \le \text{Mass }\% \le 100\% and mcomponent≤msamplem_{\text{component}} \le m_{\text{sample}}

  • Whenever a calculated percentage is greater than 100%100\% or negative, stop and recheck the molar ratios.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine the overall molar equivalence using the shared intermediate I2\text{I}_2: n(Cu2+)=n(S2O32−)=0.019225 moln(\text{Cu}^{2+}) = n(\text{S}_2\text{O}_3^{2-}) = 0.019225\text{ mol}.

  2. Calculate the mass of copper: m(Cu)=0.019225 mol×63.55 g/mol=1.2217 g≈1.222 gm(\text{Cu}) = 0.019225\text{ mol} \times 63.55\text{ g/mol} = 1.2217\text{ g} \approx 1.222\text{ g}.

  3. Calculate the mass percentage of copper: %Cu=1.2217 g1.500 g×100%=81.45%≈81.47%\%\text{Cu} = \frac{1.2217\text{ g}}{1.500\text{ g}} \times 100\% = 81.45\% \approx 81.47\%.

  4. Calculate the mass percentage of tin by difference: %Sn=100.00%−81.47%=18.53%\%\text{Sn} = 100.00\% - 81.47\% = 18.53\%.

Final answer

(a) Mass % Cu=81.47%\text{Mass }\%\text{ Cu} = 81.47\%, Mass % Sn=18.53%\text{Mass }\%\text{ Sn} = 18.53\%; (b) Larger Sn\text{Sn} atoms create lattice distortions that obstruct atomic planes from slipping past one another within the delocalized electron sea, increasing hardness.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice linking two-step redox titrations with formal dimensional analysis to ensure stoichiometric coefficients cancel correctly.

  • Always run a reality check on mass percentages: any value over 100%100\% indicates an upstream stoichiometric or unit error.

OverviewACEpath Teacher's Diagnosis

02 The student assumes that bronze is harder because tin contributes more valence electrons to strengthen the metallic bonds rather than because lattice distortion impedes layer slip.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n(S2O32−)=0.03845 L×0.5000 M=0.019225 mol  ⟹  n(Cu)=n(S2O32−)=0.019225 mol  ⟹  m(Cu)=0.019225 mol×63.55 g/mol=1.2217 gn(\text{S}_2\text{O}_3^{2-}) = 0.03845\text{ L} \times 0.5000\text{ M} = 0.019225\text{ mol} \implies n(\text{Cu}) = n(\text{S}_2\text{O}_3^{2-}) = 0.019225\text{ mol} \implies m(\text{Cu}) = 0.019225\text{ mol} \times 63.55\text{ g/mol} = 1.2217\text{ g}

  2. Step 2

    % Cu\text{Cu} = (1.2217 g\text{ g} / 1.500 g\text{ g}) ×\times 100% = 81.45%   ⟹  \implies % Sn\text{Sn} = 100% - 81.45% = 18.55%

  3. Step 3

    Tin has four valence electrons compared to copper which contributes fewer electrons to the delocalized sea. The higher electron density from Sn creates stronger electrostatic attractions to the metal cations, binding the lattice more rigidly and preventing deformation.

    Correct

    In pure copper, uniform copper cation cores form regular, smooth planes that slide easily past each other under shear stress. When larger tin atoms substitute into the lattice, their different atomic radius disrupts the regular packing geometry, creating local lattice strain that impedes planes of atoms from slipping past each other.

    Malleability and hardness in metals depend on the ease with which atomic planes slide past one another (slip). Although tin has a different valence configuration, alloy hardening primarily arises from atomic size mismatch creating lattice strain that pins dislocations, not from increased electron sea density.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly derived the 1:11:1 molar ratio between copper and thiosulfate from the coupled reactions.

You calculated the accurate mass percentages of copper and tin from the titration data.

You correctly identified that metallic bonding involves cation cores within a delocalized electron sea.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Mechanical Properties of Alloys vs. Lattice Slip

You explained alloy strengthening through electrostatic bond energy rather than the mechanical mechanism of plane slip and dislocation obstruction.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You connected mechanical deformation resistance directly to electron sea density and bond strength, overlooking that plastic deformation in metals occurs through the sliding of atomic planes (dislocation motion), which is blocked when different-sized solute atoms distort the regular crystal lattice.

REASONING PATH
Your ACEpath teacher’s suggested approach
Mechanism of Metal Malleability
  • Pure metals are malleable because uniform cation layers slip past each other smoothly through non-directional metallic bonds without repelling or fracturing.

  • Describe deformation as layers of atoms sliding over one another rather than breaking individual chemical bonds.

Solid Solution / Alloy Hardening
  • Substituting solute atoms of a different atomic radius creates local lattice distortion and strain fields that block layers from slipping past each other easily.

  • Attribute the increased hardness of substitutional alloys to atomic size mismatch and disrupted layer slip, not to valence electron count.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State that pure Cu\text{Cu} consists of uniform cation cores in regular layers that slide easily over one another under shear stress because metallic bonding is non-directional.

  2. Note that Sn\text{Sn} atoms have a significantly larger atomic radius than Cu\text{Cu} atoms.

  3. Conclude that substituting larger Sn\text{Sn} atoms into the Cu\text{Cu} lattice distorts the regular plane geometry, creating atomic bumps/strain that obstruct layers from sliding, making bronze harder and less malleable.

Final answer

Pure copper has smooth, identical layers of cations that slide easily past each other under applied stress. In bronze, larger tin atoms randomly replace copper atoms, distorting the regular lattice layers. This structural distortion prevents atomic planes from slipping past one another, making bronze harder and less malleable.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how interstitial versus substitutional solute atoms affect the regular stacking sequence of metal lattices.

  • Practice distinguishing thermodynamic bond strength (melting point, enthalpy of atomization) from kinetic/mechanical resistance to deformation (hardness, yield strength, malleability).

OverviewACEpath Teacher's Diagnosis

03 The student calculates the molar ratio of Cu to Sn and mistakenly reports mole fractions as the requested mass percentages.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n(Cu)=0.03845 L×0.5000 M=0.019225 mol  ⟹  m(Cu)=0.019225 mol×63.55 g/mol=1.2217 gn(\text{Cu}) = 0.03845\text{ L} \times 0.5000\text{ M} = 0.019225\text{ mol} \implies m(\text{Cu}) = 0.019225\text{ mol} \times 63.55\text{ g/mol} = 1.2217\text{ g}

  2. Step 2

    m(Sn)=1.500 g−1.2217 g=0.2783 g  ⟹  n(Sn)=0.2783 g/118.71 g/mol=0.002344 molm(\text{Sn}) = 1.500\text{ g} - 1.2217\text{ g} = 0.2783\text{ g} \implies n(\text{Sn}) = 0.2783\text{ g} / 118.71\text{ g/mol} = 0.002344\text{ mol}

  3. Step 3

    n(total)=0.019225 mol+0.002344 mol=0.021569 mol  ⟹  % Cu=0.019225 mol0.021569 mol×100%=89.13%  ⟹  % Sn=0.002344 mol0.021569 mol×100%=10.87%n(\text{total}) = 0.019225\text{ mol} + 0.002344\text{ mol} = 0.021569\text{ mol} \implies \%\text{ Cu} = \frac{0.019225\text{ mol}}{0.021569\text{ mol}} \times 100\% = 89.13\% \implies \%\text{ Sn} = \frac{0.002344\text{ mol}}{0.021569\text{ mol}} \times 100\% = 10.87\%

    Correct

    Mass % Cu=1.222 g1.500 g×100%=81.47%  ⟹  Mass % Sn=100.00%−81.47%=18.53%\text{Mass \% Cu} = \frac{1.222\text{ g}}{1.500\text{ g}} \times 100\% = 81.47\% \implies \text{Mass \% Sn} = 100.00\% - 81.47\% = 18.53\%

    You calculated the mole fraction/percentage of each component rather than the mass percent. The problem asked for mass percent, which requires dividing the mass of each metal by the total sample mass (1.500 g1.500\text{ g}).

  4. Step 4

    Pure copper contains identical atom layers that smoothly slide over one another within the delocalized valence electron sea. Introducing larger tin atoms into the copper lattice distorts the regular planes of atoms, making it much harder for dislocations and layers to slide.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related the moles of thiosulfate titrant to the moles and mass of copper in the alloy sample.

You determined the mass of tin by applying conservation of mass to the binary alloy.

You accurately articulated the dislocation-pinning mechanism and lattice distortion in substitutional alloys for Part (b).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Mole Percent vs. Mass Percent Confusion

You converted the tin mass to moles and computed mole percentages instead of dividing the individual component masses by the total sample mass.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating composition metrics (mole fraction vs. mass fraction) after performing molar stoichiometry. Once moles are found, students often stay in molar units rather than returning to gram quantities when computing percentages.

REASONING PATH
Your ACEpath teacher’s suggested approach
Composition Quantity Check
  • Mass %=msolutemtotal×100%\text{Mass \%} = \frac{m_{\text{solute}}}{m_{\text{total}}} \times 100\%, whereas Mole %=nsolutentotal×100%\text{Mole \%} = \frac{n_{\text{solute}}}{n_{\text{total}}} \times 100\%.

  • Verify whether the prompt asks for mass percent or mole percent before doing the final division.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the mass percent of copper: Mass % Cu=1.2217 g1.500 g×100%=81.45%\text{Mass \% Cu} = \frac{1.2217\text{ g}}{1.500\text{ g}} \times 100\% = 81.45\% (or 81.47%81.47\% using unrounded values).

  2. Compute the mass percent of tin: Mass % Sn=100.00%−81.45%=18.55%\text{Mass \% Sn} = 100.00\% - 81.45\% = 18.55\% (or 0.2783 g1.500 g×100%=18.55%\frac{0.2783\text{ g}}{1.500\text{ g}} \times 100\% = 18.55\%).

Final answer

(a) Mass % Cu=81.47%\text{Mass \% Cu} = 81.47\%, Mass % Sn=18.53%\text{Mass \% Sn} = 18.53\%; (b) Substituting larger Sn\text{Sn} atoms creates local lattice strain and distorts the regular planes of Cu\text{Cu} cations, hindering dislocation slip within the delocalized electron sea and thereby increasing hardness.

NEXT STEPS
Final Takeaways from Your Teacher
  • Always reread the question prompt at the final step to confirm whether composition is requested in mass percent or mole percent.

  • Whenever a total sample mass in grams is given, compute mass percent directly by dividing each component's mass by the total sample mass.

Lock it in

Similar question

01

A 0.800 g0.800\text{ g} brass sample containing copper is dissolved and treated with excess KI\text{KI}. The liberated I2\text{I}_2 requires 21.30 mL21.30\text{ mL} of 0.4000 M Na2S2O30.4000\text{ M}\text{ Na}_2\text{S}_2\text{O}_3 to reach the starch end point. Calculate the mass percent of copper in the brass (M=63.55 g/molM = 63.55\text{ g/mol}).

Answer

n(Cu2+)=n(S2O32−)=0.02130 L×0.4000 mol/L=0.008520 moln(\text{Cu}^{2+}) = n(\text{S}_2\text{O}_3^{2-}) = 0.02130\text{ L} \times 0.4000\text{ mol/L} = 0.008520\text{ mol}. m(Cu)=0.008520 mol×63.55 g/mol=0.5414 gm(\text{Cu}) = 0.008520\text{ mol} \times 63.55\text{ g/mol} = 0.5414\text{ g}. %Cu=0.5414 g0.800 g×100%=67.68%\%\text{Cu} = \frac{0.5414\text{ g}}{0.800\text{ g}} \times 100\% = 67.68\%.

02

In a Winkler titration for dissolved oxygen, the coupled reactions are 2 Mn(OH)2+O2→2 MnO(OH)22\text{ Mn(OH)}_2 + \text{O}_2 \to 2\text{ MnO(OH)}_2, then MnO(OH)2+2 I−+4 H+→Mn2++I2+3 H2O\text{MnO(OH)}_2 + 2\text{ I}^- + 4\text{ H}^+ \to \text{Mn}^{2+} + \text{I}_2 + 3\text{ H}_2\text{O}, and finally I2+2 S2O32−→2 I−+S4O62−\text{I}_2 + 2\text{ S}_2\text{O}_3^{2-} \to 2\text{ I}^- + \text{S}_4\text{O}_6^{2-}. Determine the stoichiometric mole ratio of O2\text{O}_2 to S2O32−\text{S}_2\text{O}_3^{2-}.

Answer

1 O2  ⟹  2 MnO(OH)2  ⟹  2 I2  ⟹  4 S2O32−1\text{ O}_2 \implies 2\text{ MnO(OH)}_2 \implies 2\text{ I}_2 \implies 4\text{ S}_2\text{O}_3^{2-}. Thus, the stoichiometric mole ratio is 1 mol O2:4 mol S2O32−1\text{ mol }\text{O}_2 : 4\text{ mol }\text{S}_2\text{O}_3^{2-} (or n(O2)=14n(S2O32−)n(\text{O}_2) = \frac{1}{4}n(\text{S}_2\text{O}_3^{2-})).

03

Explain from an atomic and electron sea perspective why an interstitial alloy like carbon steel is generally harder and less ductile than a substitutional alloy where solute and solvent atoms have nearly identical radii.

Answer

In carbon steel, small carbon atoms occupy interstitial voids between iron cation cores, severely straining the lattice locally and forming strong localized directional bonding interactions that lock dislocation planes in place. In contrast, a substitutional alloy with nearly identical atomic radii causes minimal lattice distortion, allowing close-packed planes to slide past one another much more readily under shear stress.

Loading workspace…