Resources

A municipal wastewater sample contains hydrazine, N2H4\text{N}_2\text{H}_4, at a mass concentration of 64.1 mg/L64.1\text{ mg/L}. (a) Convert this concentration into molarity (mol/L\text{mol/L}), given the molar mass of N2H4\text{N}_2\text{H}_4 is 32.05 g/mol32.05\text{ g/mol}. (b) Construct the complete Lewis electron-dot structure for N2H4\text{N}_2\text{H}_4, assuming each nitrogen atom binds to two hydrogen atoms and to the other nitrogen atom. (c) State the total number of single σ\sigma-bonds, the number of π\pi-bonds, and the total number of non-bonding lone pairs in one mole of hydrazine molecules.

Answer and steps

Final answer

(a) Molarity =64.1×10−3 g/L32.05 g/mol=2.00×10−3 M= \frac{64.1 \times 10^{-3}\text{ g/L}}{32.05\text{ g/mol}} = 2.00 \times 10^{-3}\text{ M}; (b) The Lewis structure contains a central single bond H2N−NH2\text{H}_2\text{N}-\text{NH}_2 with one lone pair on each N\text{N} atom; (c) Per molecule: 55 single σ\sigma-bonds (4 N−H4\text{ N}-\text{H} and 1 N−N1\text{ N}-\text{N}), 00 π\pi-bonds, and 22 non-bonding lone pairs. Therefore, in 1.00 mol1.00\text{ mol} of hydrazine: 5.00 mol5.00\text{ mol} of σ\sigma-bonds (3.01×10243.01 \times 10^{24} bonds), 0 mol0\text{ mol} of π\pi-bonds, and 2.00 mol2.00\text{ mol} of lone pairs (1.20×10241.20 \times 10^{24} lone pairs).

Steps

Part (a): Calculating Molarity

  1. Convert mass concentration from milligrams per liter to grams per liter: Mass concentration=64.1 mg/L=64.1×10−3 g/L=0.0641 g/L\text{Mass concentration} = 64.1\text{ mg/L} = 64.1 \times 10^{-3}\text{ g/L} = 0.0641\text{ g/L}
  2. Calculate molarity (mol/L\text{mol/L}): Molarity (MM) is the ratio of mass concentration in g/L\text{g/L} to the molar mass (MmM_{\text{m}}): M=Concentration in g/LMm=64.1×10−3 g/L32.05 g/mol=2.00×10−3 mol/L=2.00×10−3 MM = \frac{\text{Concentration in g/L}}{M_{\text{m}}} = \frac{64.1 \times 10^{-3}\text{ g/L}}{32.05\text{ g/mol}} = 2.00 \times 10^{-3}\text{ mol/L} = 2.00 \times 10^{-3}\text{ M}

Part (b): Constructing the Lewis Structure for NX2HX4\ce{N2H4}

  1. Count total valence electrons:

    • Each nitrogen atom (Group 15\text{Group } 15) contributes 55 valence electrons: 2×5=10 e−2 \times 5 = 10\text{ e}^-.
    • Each hydrogen atom (Group 1\text{Group } 1) contributes 11 valence electron: 4×1=4 e−4 \times 1 = 4\text{ e}^-. Total valence electrons=10+4=14 e−\text{Total valence electrons} = 10 + 4 = 14\text{ e}^-
  2. Form the skeletal framework:

    • Connect the two central nitrogen atoms with a single covalent bond: N−N\ce{N-N}.
    • Attach two hydrogen atoms to each nitrogen atom with single covalent bonds: HX2N−NHX2\ce{H2N-NH2}.
    • Number of electrons used in the 55 single bonds: 5 bonds×2 e−/bond=10 e−5\text{ bonds} \times 2\text{ e}^-/\text{bond} = 10\text{ e}^-
  3. Distribute remaining valence electrons:

    • Remaining electrons: 14−10=4 e−14 - 10 = 4\text{ e}^- (22 electron pairs).
    • Place one lone pair of electrons on each nitrogen atom.
  4. Verify octets and duets:

    • Each H\ce{H} shares 2 e−2\text{ e}^-, fulfilling its duet rule.
    • Each N\ce{N} possesses 33 single bonds (6 e−6\text{ e}^-) and 11 lone pair (2 e−2\text{ e}^-), giving 8 e−8\text{ e}^- and fulfilling the octet rule.
    • The complete structure is: \phantom{\cdot\cdot}\text{H}\phantom{-}\text{H}\phantom{\cdot\cdot} \\ \phantom{\cdot\cdot}|\phantom{--}|\phantom{\cdot\cdot} \\ :\!\text{N}-\text{N}\!: \\ \phantom{\cdot\cdot}|\phantom{--}|\phantom{\cdot\cdot} \\ \phantom{\cdot\cdot}\text{H}\phantom{-}\text{H}\phantom{\cdot\cdot} \end{array}$$ *(represented compactly as $\ce{H2\overset{..}{N}-\overset{..}{N}H2}$)*

Part (c): Counting Bonds and Lone Pairs in One Mole

  1. Count per single molecule:

    • σ\sigma-bonds: Every single covalent bond is a σ\sigma-bond. With 4 N−H4\text{ N}-\text{H} bonds and 1 N−N1\text{ N}-\text{N} bond, there are 55 σ\sigma-bonds per molecule.
    • π\pi-bonds: There are no double or triple bonds, so there are 00 π\pi-bonds per molecule.
    • Lone pairs: Each nitrogen atom carries 11 non-bonding lone pair, yielding 22 lone pairs per molecule.
  2. Scale to one mole of NX2HX4\ce{N2H4} molecules (NA≈6.022×1023 mol−1N_{\text{A}} \approx 6.022 \times 10^{23}\text{ mol}^{-1}):

    • σ\sigma-bonds: 5.00 mol of σ-bonds≈5.00×6.022×1023=3.01×1024 σ-bonds5.00\text{ mol of }\sigma\text{-bonds} \approx 5.00 \times 6.022 \times 10^{23} = 3.01 \times 10^{24}\text{ }\sigma\text{-bonds}
    • π\pi-bonds: 0 mol of π-bonds=0 π-bonds0\text{ mol of }\pi\text{-bonds} = 0\text{ }\pi\text{-bonds}
    • Lone pairs: 2.00 mol of lone pairs≈2.00×6.022×1023=1.20×1024 lone pairs2.00\text{ mol of lone pairs} \approx 2.00 \times 6.022 \times 10^{23} = 1.20 \times 10^{24}\text{ lone pairs}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert milligrams to grams, resulting in a calculated molarity that is 1000 times too large.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Molarity=64.1 g/L32.05 g/mol  ⟹  Molarity=2.00 mol/L\text{Molarity} = \frac{64.1\text{ g/L}}{32.05\text{ g/mol}} \implies \text{Molarity} = 2.00\text{ mol/L}

    Correct

    Molarity=64.1×10−3 g/L32.05 g/mol=2.00×10−3 mol/L\text{Molarity} = \frac{64.1 \times 10^{-3}\text{ g/L}}{32.05\text{ g/mol}} = 2.00 \times 10^{-3}\text{ mol/L}

    You treated the given mass concentration of 64.1 mg/L64.1\text{ mg/L} directly as 64.1 g/L64.1\text{ g/L}. Because molar mass is expressed in g/mol\text{g/mol}, the mass concentration must first be converted using 1 mg=10−3 g1\text{ mg} = 10^{-3}\text{ g}, giving 0.0641 g/L0.0641\text{ g/L}.

  2. Step 2

    Valence electrons=2(5)+4(1)=14  ⟹  Skeleton: H−N(H)−N(H)−H has 5 single bonds=10 electrons  ⟹  Remaining 4 electrons placed as 1 lone pair on each N atom: H2N¨−N¨H2\text{Valence electrons} = 2(5) + 4(1) = 14 \implies \text{Skeleton: } \text{H}-\text{N}(\text{H})-\text{N}(\text{H})-\text{H}\text{ has } 5\text{ single bonds} = 10\text{ electrons} \implies \text{Remaining } 4\text{ electrons placed as } 1\text{ lone pair on each N atom: } \text{H}_2\ddot{\text{N}}-\ddot{\text{N}}\text{H}_2

  3. Step 3

    σ-bonds=5 mol,π-bonds=0,Lone pairs=2 mol\sigma\text{-bonds} = 5\text{ mol}, \pi\text{-bonds} = 0, \text{Lone pairs} = 2\text{ mol}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly counted the total number of valence electrons for hydrazine.

You drew an accurate Lewis structure fulfilling the octet and duet rules.

You correctly identified the number of σ\sigma-bonds, π\pi-bonds, and lone pairs per mole of substance.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Omission (mg to g)

You substituted the numeric value of the concentration (64.164.1) without adjusting the prefix from milligrams to grams.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking metric prefix alignment before substituting into a formula with compound units (using mg/L\text{mg/L} with g/mol\text{g/mol} instead of matching grams to grams).

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Mass Units Before Dividing
  • Molarity (mol/L)=Mass concentration in g/LMolar mass in g/mol\text{Molarity } (\text{mol/L}) = \frac{\text{Mass concentration in } \mathbf{g/L}}{\text{Molar mass in } \mathbf{g/mol}}

  • Whenever concentration is given in mg/L\text{mg/L}, multiply by 10−3 g/mg10^{-3}\text{ g/mg} or divide by 10001000 to convert it to g/L\text{g/L} before dividing by molar mass.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the mass concentration from milligrams per liter to grams per liter: 64.1 mg/L=64.1×10−3 g/L=0.0641 g/L64.1\text{ mg/L} = 64.1 \times 10^{-3}\text{ g/L} = 0.0641\text{ g/L}.

  2. Divide by the molar mass: Molarity=0.0641 g/L32.05 g/mol=2.00×10−3 mol/L\text{Molarity} = \frac{0.0641\text{ g/L}}{32.05\text{ g/mol}} = 2.00 \times 10^{-3}\text{ mol/L}.

Final answer

(a) 2.00×10−3 M2.00 \times 10^{-3}\text{ M}; (b) H2N¨−N¨H2\text{H}_2\ddot{\text{N}}-\ddot{\text{N}}\text{H}_2 with 11 lone pair on each N\text{N}; (c) 5.00 mol of σ-bonds5.00\text{ mol of } \sigma\text{-bonds}, 0 mol of π-bonds0\text{ mol of } \pi\text{-bonds}, and 2.00 mol of lone pairs2.00\text{ mol of lone pairs}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Circle or highlight unit prefixes like 'm' (milli-) or 'k' (kilo-) before beginning algebraic calculations.

  • Write out explicit conversion factors with canceling units during dimensional analysis.

OverviewACEpath Teacher's Diagnosis

02 The student forces an octet using a double bond between the two nitrogen atoms, creating a π-bond and leaving zero lone pairs on nitrogen.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    64.1 mg/L=0.0641 g/L  ⟹  Molarity=0.0641/32.05=0.00200 mol/L64.1\text{ mg/L} = 0.0641\text{ g/L} \implies \text{Molarity} = 0.0641 / 32.05 = 0.00200\text{ mol/L}

  2. Step 2

    Valence electrons=2(5)+4(1)=14\text{Valence electrons} = 2(5) + 4(1) = 14

  3. Step 3

    Draw a double bond between N atoms: H2N=NH2  ⟹  Bonding electrons=2(4)+4=12 electrons  ⟹  Remaining 2 electrons cannot satisfy octets, so structure drawn as H2N=NH2\text{Draw a double bond between N atoms: } \text{H}_2\text{N}=\text{NH}_2 \implies \text{Bonding electrons} = 2(4) + 4 = 12\text{ electrons} \implies \text{Remaining 2 electrons cannot satisfy octets, so structure drawn as } \text{H}_2\text{N}=\text{NH}_2

    Correct

    Connect with single bonds: H2N−NH2\text{H}_2\text{N}-\text{NH}_2 using 5×2=10 e−5 \times 2 = 10\text{ e}^-. Place the remaining 14−10=4 e−14 - 10 = 4\text{ e}^- as one lone pair on each N\text{N} atom: H2N..−N..H2\text{H}_2\overset{..}{\text{N}}-\overset{..}{\text{N}}\text{H}_2.

    You introduced a double bond prematurely. Always start with a single-bonded skeleton first: five single bonds use 1010 electrons, leaving exactly 44 electrons (22 lone pairs) to place on the nitrogen atoms, which fully satisfies the octet on both nitrogens without any multiple bonds.

  4. Step 4

    σ-bonds=5 mol,π-bonds=1 mol,Lone pairs=0\sigma\text{-bonds} = 5\text{ mol}, \pi\text{-bonds} = 1\text{ mol}, \text{Lone pairs} = 0

    Correct

    σ-bonds=5.00 mol,π-bonds=0 mol,Lone pairs=2.00 mol\sigma\text{-bonds} = 5.00\text{ mol}, \pi\text{-bonds} = 0\text{ mol}, \text{Lone pairs} = 2.00\text{ mol}

    Because your Lewis structure contained an extra double bond and dropped the remaining valence electrons, your bond and lone pair counts were directly affected.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted the units and calculated the solution molarity with the correct significant figures.

You tallied the total valence electron count correctly as 14.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Premature Multiple Bond Formation

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You formed a double bond before distributing remaining valence electrons to terminal or central atoms as lone pairs, causing you to overlook that single bonds plus lone pairs already complete all octets.

REASONING PATH
Your ACEpath teacher’s suggested approach
Single Bond First Principle
  • Always connect all bonded atoms using single covalent bonds first before considering multiple bonds.

  • Subtract the single-bond electrons from the total valence electron count, and distribute the remaining electrons as lone pairs to satisfy duets and octets.

Forming Multiple Bonds
  • Multiple bonds (double or triple) are only formed when central atoms still lack an octet after all remaining valence electrons have been distributed as lone pairs.

  • If all atoms already have complete octets and duets with single bonds and lone pairs, do not convert lone pairs into sharing bonds.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Connect the framework with single bonds: four N−H\text{N}-\text{H} bonds and one N−N\text{N}-\text{N} bond (5×2=10 e−5 \times 2 = 10\text{ e}^-).

  2. Subtract bonding electrons from the total pool: 14−10=4 e−14 - 10 = 4\text{ e}^- remaining.

  3. Assign the 44 remaining electrons as two lone pairs, placing one lone pair on each nitrogen atom to complete their octets: H2N..−N..H2\text{H}_2\overset{..}{\text{N}}-\overset{..}{\text{N}}\text{H}_2.

  4. Count bonds and lone pairs per molecule: 55 σ\sigma-bonds, 00 π\pi-bonds, and 22 lone pairs.

  5. Scale to 1.00 mol1.00\text{ mol} of molecules: 5.00 mol5.00\text{ mol} of σ\sigma-bonds (3.01×10243.01 \times 10^{24}), 0 mol0\text{ mol} of π\pi-bonds, and 2.00 mol2.00\text{ mol} of lone pairs (1.20×10241.20 \times 10^{24}).

Final answer

(a) 2.00×10−3 M2.00 \times 10^{-3}\text{ M}; (b) H2N..−N..H2\text{H}_2\overset{..}{\text{N}}-\overset{..}{\text{N}}\text{H}_2 with one single N−N\text{N}-\text{N} bond and one lone pair per N\text{N}; (c) 5.00 mol5.00\text{ mol} σ\sigma-bonds, 0 mol0\text{ mol} π\pi-bonds, and 2.00 mol2.00\text{ mol} lone pairs.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the systematic step-by-step procedure for drawing Lewis structures: total electrons →\rightarrow single-bond skeleton →\rightarrow complete outer octets →\rightarrow assign remaining electrons to central atoms.

  • Practice checking whether an atom already achieves an octet via lone pairs before introducing double or triple bonds.

OverviewACEpath Teacher's Diagnosis

03 The student counts only the N-N bond as a σ-bond while mistaking N-H bonds as non-sigma interactions, reporting only 1 σ-bond per molecule.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    64.1 mg/L=0.0641 g/L  ⟹  Molarity=0.064132.05=0.00200 mol/L64.1\text{ mg/L} = 0.0641\text{ g/L} \implies \text{Molarity} = \frac{0.0641}{32.05} = 0.00200\text{ mol/L}

  2. Step 2

    Valence electrons=2(5)+4(1)=14  ⟹  5 single bonds=10 electrons  ⟹  Add one lone pair on each N atom to complete octet: H2N¨−N¨H2\text{Valence electrons} = 2(5) + 4(1) = 14 \implies 5\text{ single bonds} = 10\text{ electrons} \implies \text{Add one lone pair on each N atom to complete octet: } \text{H}_2\ddot{\text{N}}-\ddot{\text{N}}\text{H}_2

  3. Step 3

    σ-bonds=1 mol (only between N and N),  π-bonds=0,  Lone pairs=2 mol\sigma\text{-bonds} = 1\text{ mol (only between N and N)},\; \pi\text{-bonds} = 0,\; \text{Lone pairs} = 2\text{ mol}

    Correct

    In 1 mol of N2H4: 5 mol of σ-bonds (4 N−H and 1 N−N),  0 mol of π-bonds,  2 mol of lone pairs\text{In } 1\text{ mol of } \text{N}_2\text{H}_4\text{: } 5\text{ mol of } \sigma\text{-bonds (}4\text{ N}-\text{H and } 1\text{ N}-\text{N)},\; 0\text{ mol of } \pi\text{-bonds},\; 2\text{ mol of lone pairs}

    You correctly determined the number of π\pi-bonds and lone pairs, but you only counted the central N−N\text{N}-\text{N} bond as a σ\sigma-bond. Every single covalent bond is a σ\sigma-bond, so the four N−H\text{N}-\text{H} bonds must also be included, giving 5 mol5\text{ mol} of σ\sigma-bonds.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted mass concentration into molarity using dimensional analysis.

You accurately calculated the total valence electrons and drew the correct Lewis structure for hydrazine.

You correctly identified that hydrazine contains zero π\pi-bonds and two non-bonding lone pairs per molecule.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incomplete Bond Classification

You restricted the definition of σ\sigma-bonds to central or heavy-atom bonds (extN−extN ext{N}- ext{N}) while neglecting the terminal extN−extH ext{N}- ext{H} single bonds.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating localized single covalent bonds involving hydrogen with non-sigma interactions, or assuming that only bonds between central/multi-valent atoms qualify as σ\sigma-bonds. In valence bond theory, any localized single covalent bond—regardless of the atoms involved—is formed by head-on orbital overlap and is therefore a σ\sigma-bond.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify all single bonds as $\sigma$-bonds
  • Every localized single covalent bond (whether X−H\text{X}-\text{H} or X−Y\text{X}-\text{Y}) is a σ\sigma-bond. A double bond consists of 1 σ+1 π1\,\sigma + 1\,\pi, and a triple bond consists of 1 σ+2 π1\,\sigma + 2\,\pi.

  • Scan the entire Lewis structure and count every single bond line, including all bonds to terminal hydrogen atoms, to get the total σ\sigma-bond count.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify all covalent bonds in the molecule: there are 4 N−H4\text{ N}-\text{H} single bonds and 1 N−N1\text{ N}-\text{N} single bond, totaling 55 single bonds.

  2. Classify each bond type: every single bond is a σ\sigma-bond, and there are no double or triple bonds, giving 5 σ5\text{ }\sigma-bonds and 0 π0\text{ }\pi-bonds per molecule.

  3. Scale to one mole of molecules: 1 mol of N2H41\text{ mol of } \text{N}_2\text{H}_4 contains 5 mol of σ5\text{ mol of } \sigma-bonds, 0 mol of π0\text{ mol of } \pi-bonds, and 2 mol of lone pairs2\text{ mol of lone pairs}.

Final answer

(a) 2.00×10−3 M2.00 \times 10^{-3}\text{ M}; (b) H2N¨−N¨H2\text{H}_2\ddot{\text{N}}-\ddot{\text{N}}\text{H}_2; (c) 5 mol of σ-bonds5\text{ mol of } \sigma\text{-bonds}, 0 mol of π-bonds0\text{ mol of } \pi\text{-bonds}, and 2 mol of lone pairs2\text{ mol of lone pairs}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always remember that all single bonds are σ\sigma-bonds, even when connected to terminal atoms like hydrogen.

  • Practice classifying bonding types (σ\sigma vs. π\pi) across diverse molecules containing single, double, and triple bonds.

Lock it in

Similar question

01

A groundwater sample has a nitrate ion (NO3−\text{NO}_3^-, molar mass 62.00 g/mol62.00\text{ g/mol}) concentration of 31.0 mg/L31.0\text{ mg/L}. Calculate its molarity in mol/L\text{mol/L}.

Answer

5.00×10−4 M5.00 \times 10^{-4}\text{ M}. Step 1: Convert concentration to g/L\text{g/L}: 31.0 mg/L=0.0310 g/L31.0\text{ mg/L} = 0.0310\text{ g/L}. Step 2: Divide by molar mass: 0.0310 g/L62.00 g/mol=5.00×10−4 mol/L\frac{0.0310\text{ g/L}}{62.00\text{ g/mol}} = 5.00 \times 10^{-4}\text{ mol/L}.

02

An aqueous solution contains 12.8 mg/L12.8\text{ mg/L} of sulfur dioxide (SO2\text{SO}_2, molar mass 64.06 g/mol64.06\text{ g/mol}). (a) Find the molarity of SO2\text{SO}_2. (b) In 1.00 mol1.00\text{ mol} of SO2\text{SO}_2 molecules (which possess a central resonance structure with one single bond, one double bond, and one lone pair on sulfur), how many moles of σ\sigma-bonds and π\pi-bonds are present?

Answer

(a) 2.00×10−4 M2.00 \times 10^{-4}\text{ M}; (b) 2.00 mol of σ-bonds2.00\text{ mol of } \sigma\text{-bonds} and 1.00 mol of π-bonds1.00\text{ mol of } \pi\text{-bonds}. Explanation: Convert 12.8 mg/L=0.0128 g/L12.8\text{ mg/L} = 0.0128\text{ g/L}, so M=0.012864.06≈2.00×10−4 MM = \frac{0.0128}{64.06} \approx 2.00 \times 10^{-4}\text{ M}. Each SO2\text{SO}_2 molecule has two bond domains (1 single+1 double1\text{ single} + 1\text{ double}), containing 22 σ\sigma-bonds and 11 π\pi-bond in total.

03

A 250.0 mL250.0\text{ mL} wastewater aliquot contains 0.480 mg0.480\text{ mg} of dissolved hydrazine (N2H4\text{N}_2\text{H}_4, molar mass 32.05 g/mol32.05\text{ g/mol}). Determine the concentration in mg/L\text{mg/L}, the molarity in mol/L\text{mol/L}, and the total number of non-bonding lone pairs in this 250.0 mL250.0\text{ mL} sample.

Answer

Concentration =1.92 mg/L= 1.92\text{ mg/L}; Molarity =5.99×10−5 M= 5.99 \times 10^{-5}\text{ M}; Lone pairs =1.80×1019= 1.80 \times 10^{19}. Steps: Concentration =0.480 mg0.2500 L=1.92 mg/L=1.92×10−3 g/L= \frac{0.480\text{ mg}}{0.2500\text{ L}} = 1.92\text{ mg/L} = 1.92 \times 10^{-3}\text{ g/L}. Molarity =1.92×10−3 g/L32.05 g/mol≈5.99×10−5 mol/L= \frac{1.92 \times 10^{-3}\text{ g/L}}{32.05\text{ g/mol}} \approx 5.99 \times 10^{-5}\text{ mol/L}. Moles of N2H4=5.99×10−5 mol/L×0.2500 L=1.498×10−5 mol\text{N}_2\text{H}_4 = 5.99 \times 10^{-5}\text{ mol/L} \times 0.2500\text{ L} = 1.498 \times 10^{-5}\text{ mol}. Each molecule has 22 lone pairs, so total lone pairs =2×(1.498×10−5 mol)×(6.022×1023 mol−1)≈1.80×1019= 2 \times (1.498 \times 10^{-5}\text{ mol}) \times (6.022 \times 10^{23}\text{ mol}^{-1}) \approx 1.80 \times 10^{19} lone pairs.

Loading workspace…