Resources

An industrial electrolytic refining cell purifies nickel from an aqueous electrolyte where the dissolved nickel concentration is reported as 1.47×104 ppm1.47\times 10^4\text{ ppm} of Ni2+\text{Ni}^{2+} (assume solution density ρ=1.00 g/mL\rho = 1.00\text{ g/mL}, molar mass of Ni=58.69 g/mol\text{Ni} = 58.69\text{ g/mol}). (a) Convert this concentration to molarity (mol/L\text{mol/L}). (b) If this electrolytic cell operates at a constant current of 85.0 A85.0\text{ A} for 4.00 hours4.00\text{ hours}, calculate the mass of purified nickel in kilograms deposited at the cathode (F=96485 C/mol e−F = 96485\text{ C/mol }e^-).

Answer and steps

Final answer

(a) [Ni2+]=0.250 M[\text{Ni}^{2+}] = 0.250\text{ M}; (b) Mass of Ni=0.372 kg\text{Ni} = 0.372\text{ kg}.

Steps

Part (a): Converting Concentration from ppm\text{ppm} to Molarity

  1. Understand parts per million (ppm\text{ppm}): By definition, ppm\text{ppm} represents parts of solute per million parts of solution by mass: ppm=mass of solutemass of solution×106\text{ppm} = \frac{\text{mass of solute}}{\text{mass of solution}} \times 10^6 Given the solution density is ρ=1.00 g/mL\rho = 1.00\text{ g/mL}, one liter (1.00 L=1000 mL1.00\text{ L} = 1000\text{ mL}) of solution has a mass of: Mass of 1 L solution=1000 mL×1.00 g/mL=1000 g=1.00×106 mg\text{Mass of } 1\text{ L solution} = 1000\text{ mL} \times 1.00\text{ g/mL} = 1000\text{ g} = 1.00 \times 10^6\text{ mg} Therefore, for dilute aqueous solutions with ρ=1.00 g/mL\rho = 1.00\text{ g/mL}, 1 ppm=1 mg/L1\text{ ppm} = 1\text{ mg/L}.
  2. Calculate the mass concentration in g/L\text{g/L}: Concentration=1.47×104 mg/L=14.7 g/L\text{Concentration} = 1.47 \times 10^4\text{ mg/L} = 14.7\text{ g/L}
  3. Convert mass concentration to molarity (MM): Divide the mass concentration by the molar mass of nickel (MNi=58.69 g/molM_{\ce{Ni}} = 58.69\text{ g/mol}): [NiX2+]=14.7 g/L58.69 g/mol=0.25047 mol/L≈0.250 M[\ce{Ni^2+}] = \frac{14.7\text{ g/L}}{58.69\text{ g/mol}} = 0.25047\text{ mol/L} \approx 0.250\text{ M}

Part (b): Mass of Nickel Deposited at the Cathode

  1. Calculate the total electric charge (QQ): First, convert time from hours to seconds: t=4.00 h×3600 s/h=14400 st = 4.00\text{ h} \times 3600\text{ s/h} = 14400\text{ s} Using Faraday's relationship Q=I⋅tQ = I \cdot t: Q=85.0 A×14400 s=1.224×106 CQ = 85.0\text{ A} \times 14400\text{ s} = 1.224 \times 10^6\text{ C}
  2. Determine the moles of electrons transferred (ne−n_{e^-}): Using Faraday's constant (F=96485 C/mol e−F = 96485\text{ C/mol }e^-): ne−=QF=1.224×106 C96485 C/mol e−≈12.686 mol e−n_{e^-} = \frac{Q}{F} = \frac{1.224 \times 10^6\text{ C}}{96485\text{ C/mol }e^-} \approx 12.686\text{ mol }e^-
  3. Determine the moles of nickel deposited: At the cathode, nickel(II) ions undergo reduction according to the half-reaction: NiX2+(aq)+2 eX−→Ni(s)\ce{Ni^2+(aq) + 2e^- -> Ni(s)} Since 2 mol2\text{ mol} of electrons deposit 1 mol1\text{ mol} of nickel metal (z=2z = 2): nNi=ne−2=12.686 mol2=6.343 moln_{\ce{Ni}} = \frac{n_{e^-}}{2} = \frac{12.686\text{ mol}}{2} = 6.343\text{ mol}
  4. Calculate the mass of nickel deposited in kilograms: Multiply the moles of nickel by its molar mass: mNi=6.343 mol×58.69 g/mol=372.27 gm_{\ce{Ni}} = 6.343\text{ mol} \times 58.69\text{ g/mol} = 372.27\text{ g} Convert grams to kilograms: mNi=372.27 g1000 g/kg≈0.372 kgm_{\ce{Ni}} = \frac{372.27\text{ g}}{1000\text{ g/kg}} \approx 0.372\text{ kg}

Common Pitfall: Always verify the stoichiometric coefficient of electrons (zz) in the half-reaction. For NiX2+\ce{Ni^2+}, omitting the factor of 22 leads to double the actual calculated mass of deposited metal.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that reducing Ni²⁺ to metallic Ni requires 2 moles of electrons per mole of Ni, using z = 1 instead and doubling the deposited mass.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    1.47×104 ppm=1.47×104 mg/L=14.7 g/L  ⟹  Molarity=(14.7 g/L)/(58.69 g/mol)=0.250 mol/L1.47 \times 10^4\text{ ppm} = 1.47 \times 10^4\text{ mg/L} = 14.7\text{ g/L} \implies \text{Molarity} = (14.7\text{ g/L}) / (58.69\text{ g/mol}) = 0.250\text{ mol/L}

  2. Step 2

    t=4.00×3600 s=14400 s  ⟹  Q=85.0 A×14400 s=1.224×106 C  ⟹  ne=(1.224×106 C)/(96485 C/mol e−)=12.69 mol e−t = 4.00 \times 3600\text{ s} = 14400\text{ s} \implies Q = 85.0\text{ A} \times 14400\text{ s} = 1.224 \times 10^6\text{ C} \implies n_e = (1.224 \times 10^6\text{ C}) / (96485\text{ C/mol }e^-) = 12.69\text{ mol }e^-

  3. Step 3

    nNi=12.69 moln_{\text{Ni}} = 12.69\text{ mol}

    Correct

    nNi=ne−2=12.69 mol e−2 mol e−/mol Ni≈6.343 moln_{\ce{Ni}} = \frac{n_{e^-}}{2} = \frac{12.69\text{ mol }e^-}{2\text{ mol }e^-/\text{mol Ni}} \approx 6.343\text{ mol}

    Reducing each NiX2+\ce{Ni^2+} ion to solid Ni\ce{Ni} requires two electrons according to the half-reaction NiX2+(aq)+2 eX−→Ni(s)\ce{Ni^2+(aq) + 2e^- -> Ni(s)}. You equated moles of nickel directly to moles of electrons instead of dividing by 2.

  4. Step 4

    mNi=12.69 mol×58.69 g/mol=744.8 g=0.745 kgm_{\text{Ni}} = 12.69\text{ mol} \times 58.69\text{ g/mol} = 744.8\text{ g} = 0.745\text{ kg}

    Correct

    mNi=6.343 mol×58.69 g/mol=372.3 g≈0.372 kgm_{\ce{Ni}} = 6.343\text{ mol} \times 58.69\text{ g/mol} = 372.3\text{ g} \approx 0.372\text{ kg}

    Your molar mass multiplication and unit conversion to kilograms were executed correctly, but the resulting mass carried over the factor-of-two error from step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly interpreted ppm as mg/L for an aqueous solution of density 1.00 g/mL1.00\text{ g/mL} and found the correct molarity.

You accurately converted hours to seconds and calculated the total electric charge passed through the cell.

You correctly applied Faraday's constant to find the total moles of transferred electrons.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing Electron Stoichiometry in Electrodeposition

You equated nNin_{\text{Ni}} directly to ne−n_{e^-} rather than writing the cathode reduction half-reaction to determine the stoichiometric ratio z=2z = 2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the charge number (zz) of the metal cation during electrolytic mass calculations, confusing moles of transferred electrons with moles of reduced metal atoms.

REASONING PATH
Your ACEpath teacher’s suggested approach
Cathode Half-Reaction Check
  • For any metal deposition MXz++z eX−→M(s)\ce{M^{z+} + z e^- -> M(s)}, the mole ratio is nmetalne−=1z\frac{n_{\text{metal}}}{n_{e^-}} = \frac{1}{z}.

  • Always write down the balanced cathode reduction half-reaction explicitly before calculating moles of deposited product.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the reduction half-reaction at the cathode: NiX2+(aq)+2 eX−→Ni(s)\ce{Ni^2+(aq) + 2e^- -> Ni(s)}.

  2. Relate moles of nickel to moles of electrons: nNi=ne−2=12.686 mol2=6.343 moln_{\ce{Ni}} = \frac{n_{e^-}}{2} = \frac{12.686\text{ mol}}{2} = 6.343\text{ mol}.

  3. Calculate deposited mass: mNi=6.343 mol×58.69 g/mol=372.3 g=0.372 kgm_{\ce{Ni}} = 6.343\text{ mol} \times 58.69\text{ g/mol} = 372.3\text{ g} = 0.372\text{ kg}.

Final answer

(a) [NiX2+]=0.250 M[\ce{Ni^2+}] = 0.250\text{ M}; (b) Mass of Ni=0.372 kg\ce{Ni} = 0.372\text{ kg}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the balanced cathode half-reaction for every electrolysis problem before doing any numerical calculations.

  • Verify the charge zz on the cation to confirm how many moles of electrons are required per mole of elemental deposit.

  • Practice using the comprehensive Faraday formula m=I⋅t⋅Mz⋅Fm = \frac{I \cdot t \cdot M}{z \cdot F} to keep track of all conversion factors.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to convert time from hours to seconds when calculating total charge, underestimating the charge and deposited mass by a factor of 3600.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    1.47×104 ppm=14.7 g/L  ⟹  Molarity=(14.7 g/L)/(58.69 g/mol)=0.250 mol/L1.47 \times 10^4\text{ ppm} = 14.7\text{ g/L} \implies \text{Molarity} = (14.7\text{ g/L}) / (58.69\text{ g/mol}) = 0.250\text{ mol/L}

  2. Step 2

    Q=85.0 A×4.00 h=340 CQ = 85.0\text{ A} \times 4.00\text{ h} = 340\text{ C}

    Correct

    Q=I⋅t=85.0 A×(4.00 h×3600 s/h)=85.0 A×14400 s=1.224×106 CQ = I \cdot t = 85.0\text{ A} \times (4.00\text{ h} \times 3600\text{ s/h}) = 85.0\text{ A} \times 14400\text{ s} = 1.224 \times 10^6\text{ C}

    An ampere is defined as one coulomb per second (1 A=1 C/s1\text{ A} = 1\text{ C/s}). Time must be expressed in seconds (4.00 h=14400 s4.00\text{ h} = 14400\text{ s}) before multiplying by current to yield coulombs.

  3. Step 3

    ne=340 C/(96485 C/mol e−)=0.00352 mol e−  ⟹  nNi=0.00352 mol/2=0.00176 moln_e = 340\text{ C} / (96485\text{ C/mol }e^-) = 0.00352\text{ mol }e^- \implies n_{\text{Ni}} = 0.00352\text{ mol} / 2 = 0.00176\text{ mol}

    Correct

    ne−=1.224×106 C96485 C/mol e−≈12.686 mol e−  ⟹  nNi=12.686 mol2=6.343 moln_{e^-} = \frac{1.224 \times 10^6\text{ C}}{96485\text{ C/mol }e^-} \approx 12.686\text{ mol }e^- \implies n_{\ce{Ni}} = \frac{12.686\text{ mol}}{2} = 6.343\text{ mol}

    Your reasoning using Faraday's constant and dividing by 22 for the NiX2++2 eX−→Ni\ce{Ni^2+ + 2e^- -> Ni} reduction is completely sound, but the numerical values carry forward the missing time-conversion factor.

  4. Step 4

    m=0.00176 mol×58.69 g/mol=0.103 g=0.000103 kgm = 0.00176\text{ mol} \times 58.69\text{ g/mol} = 0.103\text{ g} = 0.000103\text{ kg}

    Correct

    mNi=6.343 mol×58.69 g/mol=372.27 g=0.372 kgm_{\ce{Ni}} = 6.343\text{ mol} \times 58.69\text{ g/mol} = 372.27\text{ g} = 0.372\text{ kg}

    Your method of multiplying moles by molar mass and converting grams to kilograms is correct, but your final answer is off by a factor of 36003600 because of the charge calculation in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted parts-per-million concentration to molarity in part (a).

You applied Faraday's constant correctly to relate charge to moles of electrons.

You correctly used the 2:12:1 electron-to-nickel mole ratio from the cathode reduction half-reaction.

You correctly converted moles of nickel to grams and then kilograms.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Error (Time in Faraday's Law)

You treated an ampere-hour (A⋅h\text{A}\cdot\text{h}) as if it were directly equal to a coulomb (C\text{C}), skipping the multiplication by 3600 s/h3600\text{ s/h}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the base SI definition of the ampere (1 A=1 C/s1\text{ A} = 1\text{ C/s}) leads to inputting time in hours directly into Q=I⋅tQ = I \cdot t without dimensional conversion.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define the Ampere in SI Units
  • 1 A=1 C/s1\text{ A} = 1\text{ C/s}, so Q (in C)=I (in A)×t (in s)Q\text{ (in C)} = I\text{ (in A)} \times t\text{ (in s)}.

  • Whenever time is given in minutes or hours, immediately write down the conversion to seconds before computing QQ.

Dimensional Analysis Check
  • A⋅h=(Cs)⋅(3600 s)=3600 C\text{A} \cdot \text{h} = \left(\frac{\text{C}}{\text{s}}\right) \cdot (3600\text{ s}) = 3600\text{ C}.

  • Carry full unit tags through your calculation: write 85.0 C/s×14400 s85.0\text{ C/s} \times 14400\text{ s} so seconds cancel clearly.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert time from hours to seconds: t=4.00 h×3600 s/h=14400 st = 4.00\text{ h} \times 3600\text{ s/h} = 14400\text{ s}.

  2. Calculate total charge: Q=85.0 A×14400 s=1.224×106 CQ = 85.0\text{ A} \times 14400\text{ s} = 1.224 \times 10^6\text{ C}.

  3. Find moles of electrons: ne−=1.224×106 C96485 C/mol e−≈12.686 mol e−n_{e^-} = \frac{1.224 \times 10^6\text{ C}}{96485\text{ C/mol }e^-} \approx 12.686\text{ mol }e^-.

  4. Determine moles of nickel: nNi=12.686 mol e−2=6.343 moln_{\ce{Ni}} = \frac{12.686\text{ mol }e^-}{2} = 6.343\text{ mol}.

  5. Calculate mass in kilograms: mNi=6.343 mol×58.69 g/mol=372.3 g=0.372 kgm_{\ce{Ni}} = 6.343\text{ mol} \times 58.69\text{ g/mol} = 372.3\text{ g} = 0.372\text{ kg}.

Final answer

(a) [NiX2+]=0.250 M[\ce{Ni^2+}] = 0.250\text{ M}; (b) mNi=0.372 kgm_{\ce{Ni}} = 0.372\text{ kg}

NEXT STEPS
Final Takeaways from Your Teacher
  • In electrochemistry calculations involving current, write down 1 A=1 C/s1\text{ A} = 1\text{ C/s} explicitly to ensure time is converted to seconds.

  • Practice using dimensional analysis in a single chain of factors to avoid unit mismatches between hours, seconds, and coulombs.

OverviewACEpath Teacher's Diagnosis

03 The student misinterprets parts per million as parts per hundred (percentage), misplacing the decimal point by four orders of magnitude in the concentration calculation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    1.47×104 ppm=1.47×104 g per 100 g solution  ⟹  Mass of Ni in 1 L solution=1.47×104 g×10=147000 g/L1.47 \times 10^4\text{ ppm} = 1.47 \times 10^4\text{ g per } 100\text{ g solution} \implies \text{Mass of Ni in } 1\text{ L solution} = 1.47 \times 10^4\text{ g} \times 10 = 147000\text{ g/L}

    Correct

    ppm=g solute106 g solution=1 mg/L (for ρ=1.00 g/mL)  ⟹  1.47×104 mg/L=14.7 g/L\text{ppm} = \frac{\text{g solute}}{10^6\text{ g solution}} = 1\text{ mg/L (for }\rho = 1.00\text{ g/mL)} \implies 1.47 \times 10^4\text{ mg/L} = 14.7\text{ g/L}

    You defined parts per million (ppm) as parts per 100 g100\text{ g} of solution instead of parts per 106 g10^6\text{ g} (or 1 mg/L1\text{ mg/L} for an aqueous solution of density 1.00 g/mL1.00\text{ g/mL}). This made your mass concentration 10410^4 times too large.

  2. Step 2

    Molarity=(147000 g/L)/(58.69 g/mol)=2505 mol/L\text{Molarity} = (147000\text{ g/L}) / (58.69\text{ g/mol}) = 2505\text{ mol/L}

    Correct

    [NiX2+]=14.7 g/L58.69 g/mol≈0.250 M[\ce{Ni^2+}] = \frac{14.7\text{ g/L}}{58.69\text{ g/mol}} \approx 0.250\text{ M}

    You correctly divided mass concentration by molar mass, but your result was distorted by the incorrect concentration from the previous step.

  3. Step 3

    t=4.00×3600 s=14400 s  ⟹  Q=85.0 A×14400 s=1.224×106 C  ⟹  ne=(1.224×106 C)/(96485 C/mol e−)=12.69 mol e−t = 4.00 \times 3600\text{ s} = 14400\text{ s} \implies Q = 85.0\text{ A} \times 14400\text{ s} = 1.224 \times 10^6\text{ C} \implies n_e = (1.224 \times 10^6\text{ C}) / (96485\text{ C/mol }e^-) = 12.69\text{ mol }e^-

  4. Step 4

    nNi=12.69 mol/2=6.345 mol  ⟹  m=6.345 mol×58.69 g/mol=372.4 g=0.372 kgn_{\text{Ni}} = 12.69\text{ mol} / 2 = 6.345\text{ mol} \implies m = 6.345\text{ mol} \times 58.69\text{ g/mol} = 372.4\text{ g} = 0.372\text{ kg}

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the total charge from current and time correctly.

You applied Faraday's constant accurately to find the moles of electrons.

You used the correct stoichiometric ratio of 2 mol e−2\text{ mol }e^- per 1 mol Ni1\text{ mol }\ce{Ni} for the cathodic reduction.

You accurately converted grams of deposited nickel into kilograms.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
ppm unit definition confusion

You treated ppm as parts per hundred (percentage basis), mistaking the reference mass as 100 g100\text{ g} rather than 106 g10^6\text{ g}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing parts per million (10610^6) with percent (10210^2). In dilute aqueous solutions where ρ=1.00 g/mL\rho = 1.00\text{ g/mL}, 1 L=1000 g=106 mg1\text{ L} = 1000\text{ g} = 10^6\text{ mg}, which means 1 ppm=1 mg/L1\text{ ppm} = 1\text{ mg/L}, not grams per 100 g100\text{ g}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Recall the definition of parts per million (ppm)
  • ppm=mass of solutemass of solution×106\text{ppm} = \frac{\text{mass of solute}}{\text{mass of solution}} \times 10^6. For aqueous solutions with ρ=1.00 g/mL\rho = 1.00\text{ g/mL}, 1 ppm=1 mg/L1\text{ ppm} = 1\text{ mg/L}.

  • Express the ppm value as mg/L\text{mg/L}, then divide by 10001000 to get g/L\text{g/L} before dividing by molar mass.

Perform a physical plausibility check
  • Aqueous solution concentrations rarely exceed 10–15 M10\text{–}15\text{ M}; pure liquid water is only 55.5 M55.5\text{ M}.

  • When you obtain a molarity like 2505 mol/L2505\text{ mol/L}, pause immediately and recheck your unit scale.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that for ρ=1.00 g/mL\rho = 1.00\text{ g/mL}, 1 ppm=1 mg/L1\text{ ppm} = 1\text{ mg/L}. Therefore, 1.47×104 ppm=1.47×104 mg/L=14.7 g/L1.47 \times 10^4\text{ ppm} = 1.47 \times 10^4\text{ mg/L} = 14.7\text{ g/L}.

  2. Calculate molarity: [NiX2+]=14.7 g/L58.69 g/mol≈0.250 M[\ce{Ni^2+}] = \frac{14.7\text{ g/L}}{58.69\text{ g/mol}} \approx 0.250\text{ M}.

Final answer

(a) [NiX2+]=0.250 M[\ce{Ni^2+}] = 0.250\text{ M}; (b) Mass of Ni=0.372 kg\ce{Ni} = 0.372\text{ kg}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the bridge shortcut: for water (ρ≈1.00 g/mL\rho \approx 1.00\text{ g/mL}), 1 ppm=1 mg/L1\text{ ppm} = 1\text{ mg/L} and 1 ppb=1 μg/L1\text{ ppb} = 1\ \mu\text{g/L}.

  • Always perform a magnitude sanity check on calculated molarities to catch decimal and unit errors early.

Lock it in

Similar question

01

A solution of copper(II) sulfate is electrolyzed using a constant current of 5.00 A5.00\text{ A} for 30.0 minutes30.0\text{ minutes}. Calculate the mass of solid copper deposited at the cathode (MCu=63.55 g/molM_{\ce{Cu}} = 63.55\text{ g/mol}, F=96485 C/mol e−F = 96485\text{ C/mol }e^-).

Answer

m=2.96 gm = 2.96\text{ g}. Key steps: t=1800 st = 1800\text{ s}; Q=(5.00 A)(1800 s)=9000 CQ = (5.00\text{ A})(1800\text{ s}) = 9000\text{ C}; ne=900096485=0.09328 mol e−n_e = \frac{9000}{96485} = 0.09328\text{ mol }e^-; since CuX2++2 eX−→Cu\ce{Cu^2+ + 2e^- -> Cu}, nCu=0.093282=0.04664 moln_{\ce{Cu}} = \frac{0.09328}{2} = 0.04664\text{ mol}; m=0.04664 mol×63.55 g/mol=2.96 gm = 0.04664\text{ mol} \times 63.55\text{ g/mol} = 2.96\text{ g}.

02

An electroplating bath deposits 4.85 g4.85\text{ g} of bismuth metal (MBi=208.98 g/molM_{\ce{Bi}} = 208.98\text{ g/mol}) onto an electrode in 1.50 hours1.50\text{ hours} at a constant current of 3.00 A3.00\text{ A}. What is the oxidation state of the bismuth ion in this solution?

Answer

Oxidation state is +3+3. Key steps: t=5400 st = 5400\text{ s}; Q=(3.00 A)(5400 s)=16200 CQ = (3.00\text{ A})(5400\text{ s}) = 16200\text{ C}; ne=1620096485=0.1679 mol e−n_e = \frac{16200}{96485} = 0.1679\text{ mol }e^-; nBi=4.85 g208.98 g/mol=0.02321 moln_{\ce{Bi}} = \frac{4.85\text{ g}}{208.98\text{ g/mol}} = 0.02321\text{ mol}; stoichiometric factor z=nenBi=0.16790.02321≈7.23/1≈3z = \frac{n_e}{n_{\ce{Bi}}} = \frac{0.1679}{0.02321} \approx 7.23 / 1 \approx 3 (specifically, BiX3+\ce{Bi^3+}).

03

An industrial electrolytic cell with an efficiency of 92.0%92.0\% operates at 250 A250\text{ A} to refine aluminum from molten AlX3+\ce{Al^3+} (MAl=26.98 g/molM_{\ce{Al}} = 26.98\text{ g/mol}). How many hours are required to produce 1.00 kg1.00\text{ kg} of pure aluminum?

Answer

t=12.9 hourst = 12.9\text{ hours}. Key steps: nAl=1000 g26.98 g/mol=37.06 moln_{\ce{Al}} = \frac{1000\text{ g}}{26.98\text{ g/mol}} = 37.06\text{ mol}; reducing AlX3+\ce{Al^3+} requires z=3z = 3, so theoretical ne=3×37.06=111.19 mol e−n_e = 3 \times 37.06 = 111.19\text{ mol }e^-; theoretical charge Qtheo=111.19×96485=1.073×107 CQ_{\text{theo}} = 111.19 \times 96485 = 1.073 \times 10^7\text{ C}; actual charge needed with 92.0%92.0\% efficiency is Qactual=1.073×1070.920=1.166×107 CQ_{\text{actual}} = \frac{1.073 \times 10^7}{0.920} = 1.166 \times 10^7\text{ C}; time t=1.166×107 C250 A=46648 s≈12.96 hourst = \frac{1.166 \times 10^7\text{ C}}{250\text{ A}} = 46648\text{ s} \approx 12.96\text{ hours} (or 12.9 h12.9\text{ h} to 3 sig figs).

Loading workspace…