Resources

A student constructs a silver concentration cell at 298 K298\text{ K} with two identical Ag(s)\text{Ag}(s) electrodes. Compartment 1 initially contains [Ag+]=1.00 M[\text{Ag}^+] = 1.00\text{ M}. Compartment 2 is progressively diluted. (a) In terms of Compartment 1 and Compartment 2, identify which compartment acts as the anode and state the direction of electron flow. (b) As the silver ion concentration in Compartment 2 approaches the extreme dilution limit where [Ag+]=1.00×10−6 M[\text{Ag}^+] = 1.00 \times 10^{-6}\text{ M}, calculate the instantaneous cell potential EcellE_{\text{cell}} at 298 K298\text{ K} using 2.303RTF=0.0592 V\frac{2.303RT}{F} = 0.0592\text{ V}.

Answer and steps

Final answer

(a) Compartment 2 (dilute solution) is the anode, Compartment 1 (concentrated solution) is the cathode, and electrons flow from Compartment 2 to Compartment 1; (b) Ecell=+0.355 VE_{\text{cell}} = +0.355\text{ V}.

Steps

Part (a): Identifying the Electrodes and Direction of Electron Flow

  1. Principle of Concentration Cells: A concentration cell consists of two half-cells with identical electrodes and solutions of the same ion, differing only in solute concentration. The spontaneous process operates to equalize the concentrations in both compartments (driving the system toward equilibrium):

    • The more dilute compartment must increase its AgX+\ce{Ag+} concentration by oxidation.
    • The more concentrated compartment must decrease its AgX+\ce{Ag+} concentration by reduction.
  2. Electrode Identification:

    • Oxidation (Anode): Loss of electrons occurs in the dilute solution to produce more ions: Ag(s)→AgX+(aq,dilute)+eX−\ce{Ag(s) -> Ag+(aq, dilute) + e-} Therefore, Compartment 2 (the dilute solution) acts as the anode.
    • Reduction (Cathode): Gain of electrons occurs in the concentrated solution to consume excess ions: AgX+(aq,conc)+eX−→Ag(s)\ce{Ag+(aq, conc) + e- -> Ag(s)} Therefore, Compartment 1 (the concentrated solution) acts as the cathode.
  3. Direction of Electron Flow: Electrons are released at the anode during oxidation and travel through the external wire to the cathode, where they are consumed in reduction. Thus, electrons flow through the external circuit from Compartment 2 to Compartment 1.

Part (b): Calculating the Instantaneous Cell Potential

  1. Standard Cell Potential (Ecell∘E^\circ_{\text{cell}}): Because both half-cells utilize the same chemical species (Ag/AgX+\ce{Ag/Ag+}), the standard reduction potentials are identical: Ecell∘=Ecathode∘−Eanode∘=0.00 VE^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = 0.00\text{ V}
  2. Net Cell Reaction and Reaction Quotient (QQ): Adding the two half-reactions gives the overall cell process: AgX+(aq,Compartment1)→AgX+(aq,Compartment2)\ce{Ag+(aq, Compartment 1) -> Ag+(aq, Compartment 2)} The reaction quotient QQ expresses the ratio of products to reactants: Q=[AgX+]Compartment 2[AgX+]Compartment 1=1.00×10−6 M1.00 M=1.00×10−6Q = \frac{[\ce{Ag+}]_{\text{Compartment 2}}}{[\ce{Ag+}]_{\text{Compartment 1}}} = \frac{1.00 \times 10^{-6}\text{ M}}{1.00\text{ M}} = 1.00 \times 10^{-6}
  3. Applying the Nernst Equation: With n=1n = 1 electron transferred per silver atom, substitute the given values into the Nernst equation at 298 K298\text{ K}: Ecell=Ecell∘−0.0592 Vnlog⁡10QE_{\text{cell}} = E^\circ_{\text{cell}} - \frac{0.0592\text{ V}}{n}\log_{10} Q Ecell=0.00 V−0.0592 V1log⁡10(1.00×10−6)E_{\text{cell}} = 0.00\text{ V} - \frac{0.0592\text{ V}}{1}\log_{10}(1.00 \times 10^{-6})
  4. Evaluating the Logarithm: Since log⁡10(10−6)=−6\log_{10}(10^{-6}) = -6: Ecell=−0.0592 V⋅(−6)=+0.3552 V≈+0.355 VE_{\text{cell}} = -0.0592\text{ V} \cdot (-6) = +0.3552\text{ V} \approx +0.355\text{ V}

Common Pitfall: Remember that in concentration cells, the dilute compartment is always the product (Q=[dilute][concentrated]Q = \frac{[\text{dilute}]}{[\text{concentrated}]}). Inverting this ratio leads to a negative cell potential, which contradicts the spontaneous nature (Ecell>0E_{\text{cell}} > 0) of the discharging cell.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the roles of the electrodes in a concentration cell by mistakenly assuming the compartment with higher ion concentration forces oxidation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Compartment 1 has higher [Ag+][\text{Ag}^+], so oxidation occurs there to produce more electrons. Compartment 1 acts as the anode.

    Correct

    Compartment 2 has the lower [AgX+][\ce{Ag+}], so oxidation (Ag(s)→AgX+(aq)+eX−\ce{Ag(s) -> Ag+(aq) + e-}) occurs there to increase ion concentration toward equilibrium. Compartment 2 acts as the anode, and Compartment 1 acts as the cathode.

    Spontaneous operation drives both half-cells toward concentration equality (Le Chatelier's principle). The dilute compartment must generate more cations by oxidation (anode), while the concentrated compartment must consume cations by reduction (cathode).

  2. Step 2

    Electrons flow from Compartment 1 to Compartment 2.

    Correct

    Electrons flow through the external circuit from the anode (Compartment 2) to the cathode (Compartment 1).

    Because your anode and cathode assignments were reversed in Step 1, your electron flow direction was also reversed. Electrons always flow from the anode to the cathode.

  3. Step 3

    Ecell∘=0 V,  n=1  ⟹  Q=[Ag+]1[Ag+]2=1.00(1.00×10−6)=1.00×106E^\circ_{\text{cell}} = 0\text{ V},\; n = 1 \implies Q = \frac{[\text{Ag}^+]_1}{[\text{Ag}^+]_2} = \frac{1.00}{(1.00 \times 10^{-6})} = 1.00 \times 10^6

    Correct

    Ecell∘=0 V,  n=1  ⟹  Q=[AgX+]anode[AgX+]cathode=[AgX+]2[AgX+]1=1.00×10−6 M1.00 M=1.00×10−6E^\circ_{\text{cell}} = 0\text{ V},\; n = 1 \implies Q = \frac{[\ce{Ag+}]_{\text{anode}}}{[\ce{Ag+}]_{\text{cathode}}} = \frac{[\ce{Ag+}]_2}{[\ce{Ag+}]_1} = \frac{1.00 \times 10^{-6}\text{ M}}{1.00\text{ M}} = 1.00 \times 10^{-6}

    The overall cell reaction is AgX+(aq,conc)→AgX+(aq,dilute)\ce{Ag+(aq, conc) -> Ag+(aq, dilute)}, so the reaction quotient is always Q=[dilute][concentrated]Q = \frac{[\text{dilute}]}{[\text{concentrated}]}. Reversing the half-cell roles inverted the ratio.

  4. Step 4

    Ecell=0−0.0592log⁡(1.00×106)=−0.0592×6=−0.355 VE_{\text{cell}} = 0 - 0.0592 \log (1.00 \times 10^6) = -0.0592 \times 6 = -0.355\text{ V}

    Correct

    Ecell=0.00 V−0.0592 V1log⁡10(1.00×10−6)=−0.0592 V×(−6)=+0.355 VE_{\text{cell}} = 0.00\text{ V} - \frac{0.0592\text{ V}}{1} \log_{10}(1.00 \times 10^{-6}) = -0.0592\text{ V} \times (-6) = +0.355\text{ V}

    Your arithmetic was executed correctly based on your QQ value, but the inverted ratio yielded a negative cell potential. A galvanic cell discharging spontaneously must always produce Ecell>0E_{\text{cell}} > 0.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that a concentration cell has a standard cell potential of Ecell∘=0 VE^\circ_{\text{cell}} = 0\text{ V}.

You correctly determined that n=1n = 1 electron is transferred in the silver redox couple.

You accurately evaluated the logarithm and carried out the arithmetic of the Nernst equation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Concentration Cell Electrode Assignment

No slip occurred; this was a conceptual confusion regarding which compartment drives oxidation in a concentration cell.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that a higher cation concentration forces oxidation, whereas spontaneous electrochemical processes act to equalize concentrations. Therefore, the dilute half-cell must undergo oxidation to produce more cations, making it the anode.

REASONING PATH
Your ACEpath teacher’s suggested approach
Equalization Principle
  • Galvanic concentration cells spontaneously run toward equal concentrations: dilute becomes more concentrated (oxidation), and concentrated becomes more dilute (reduction).

  • Always assign the anode to the dilute compartment ([dilute][\text{dilute}]) and the cathode to the concentrated compartment ([conc][\text{conc}]).

Reaction Quotient in Concentration Cells
  • Q=[dilute][concentrated]<1Q = \frac{[\text{dilute}]}{[\text{concentrated}]} < 1, which ensures log⁡Q<0\log Q < 0 and Ecell>0E_{\text{cell}} > 0.

  • Check your calculated cell potential: if Ecell<0E_{\text{cell}} < 0, you have inverted QQ.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the dilute solution as Compartment 2 (1.00×10−6 M1.00 \times 10^{-6}\text{ M}) and the concentrated solution as Compartment 1 (1.00 M1.00\text{ M}).

  2. Set oxidation at the dilute side: Ag(s)→AgX+(aq,Compartment2)+eX−\ce{Ag(s) -> Ag+(aq, Compartment 2) + e-}, so Compartment 2 is the anode.

  3. Set reduction at the concentrated side: AgX+(aq,Compartment1)+eX−→Ag(s)\ce{Ag+(aq, Compartment 1) + e- -> Ag(s)}, so Compartment 1 is the cathode.

  4. Direct electron flow through the external wire from anode to cathode: Compartment 2 to Compartment 1.

  5. Write the net cell reaction: AgX+(aq,Compartment1)→AgX+(aq,Compartment2)\ce{Ag+(aq, Compartment 1) -> Ag+(aq, Compartment 2)}, yielding Q=[AgX+]2[AgX+]1=1.00×10−6Q = \frac{[\ce{Ag+}]_2}{[\ce{Ag+}]_1} = 1.00 \times 10^{-6}.

  6. Substitute into the Nernst equation: Ecell=0.00 V−0.0592 Vlog⁡10(1.00×10−6)=+0.355 VE_{\text{cell}} = 0.00\text{ V} - 0.0592\text{ V} \log_{10}(1.00 \times 10^{-6}) = +0.355\text{ V}.

Final answer

(a) Compartment 2 is the anode, Compartment 1 is the cathode, and electrons flow from Compartment 2 to Compartment 1; (b) Ecell=+0.355 VE_{\text{cell}} = +0.355\text{ V}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the driving force of concentration cells using Le Chatelier's principle: dilute half-cells produce ions, concentrated half-cells consume them.

  • Practice setting up Q=[dilute][concentrated]Q = \frac{[\text{dilute}]}{[\text{concentrated}]} for concentration cells to ensure Q<1Q < 1 and Ecell>0E_{\text{cell}} > 0.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the reaction quotient ratio in the Nernst equation as concentrated over dilute, yielding a negative cell potential for a spontaneous concentration cell.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Oxidation occurs in the more dilute solution to produce AgX+\ce{Ag+}. ⟹\Longrightarrow Compartment 2 is the anode. ⟹\Longrightarrow Electrons flow from Compartment 2 to Compartment 1.

  2. Step 2

    Ecell∘=0 V,  n=1⟹Q=[AgX+]1[AgX+]2=1.001.00×10−6=106E^\circ_{\text{cell}} = 0\text{ V},\; n = 1 \Longrightarrow Q = \frac{[\ce{Ag+}]_1}{[\ce{Ag+}]_2} = \frac{1.00}{1.00 \times 10^{-6}} = 10^6

    Correct

    Q=[AgX+]dilute[AgX+]concentrated=[AgX+]2[AgX+]1=1.00×10−6 M1.00 M=1.00×10−6Q = \frac{[\ce{Ag+}]_{\text{dilute}}}{[\ce{Ag+}]_{\text{concentrated}}} = \frac{[\ce{Ag+}]_2}{[\ce{Ag+}]_1} = \frac{1.00 \times 10^{-6}\text{ M}}{1.00\text{ M}} = 1.00 \times 10^{-6}

    You inverted the expression for the reaction quotient. The overall cell reaction consumes ions from the concentrated compartment and produces ions in the dilute compartment: AgX+(aq,conc)→AgX+(aq,dilute)\ce{Ag+(aq, conc) -> Ag+(aq, dilute)}. Therefore, products are dilute and reactants are concentrated, giving Q=[AgX+]anode[AgX+]cathode=[AgX+]2[AgX+]1=10−6Q = \frac{[\ce{Ag+}]_{\text{anode}}}{[\ce{Ag+}]_{\text{cathode}}} = \frac{[\ce{Ag+}]_2}{[\ce{Ag+}]_1} = 10^{-6}.

  3. Step 3

    Ecell=0−(0.05921)log⁡(106)=−0.0592×6=−0.355 VE_{\text{cell}} = 0 - \left(\frac{0.0592}{1}\right)\log(10^6) = -0.0592 \times 6 = -0.355\text{ V}

    Correct

    Ecell=0−0.0592 V1log⁡(10−6)=−0.0592 V×(−6)=+0.355 VE_{\text{cell}} = 0 - \frac{0.0592\text{ V}}{1}\log(10^{-6}) = -0.0592\text{ V} \times (-6) = +0.355\text{ V}

    Your arithmetic and application of the Nernst equation were correct, but because QQ was inverted, your final cell potential ended up with an incorrect negative sign. Spontaneous concentration cells must yield a positive potential (Ecell>0E_{\text{cell}} > 0).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that oxidation occurs in the dilute compartment to generate ions.

You correctly assigned Compartment 2 as the anode and traced the external electron flow from Compartment 2 to Compartment 1.

You correctly recognized that Ecell∘=0 VE^\circ_{\text{cell}} = 0\text{ V} and n=1n = 1 for a silver concentration cell.

You correctly executed the logarithmic calculation and arithmetic of the Nernst equation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Reaction Quotient in Concentration Cell

You accidentally placed the concentrated solution over the dilute solution when writing the expression for QQ.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the reaction quotient as an arbitrary ratio of concentrations without writing out the net chemical equation: AgX+(aq,conc)→AgX+(aq,dilute)\ce{Ag+(aq, conc) -> Ag+(aq, dilute)}. Because oxidation occurs in the dilute compartment, dilute AgX+\ce{Ag+} is the product and must be in the numerator of QQ.

REASONING PATH
Your ACEpath teacher’s suggested approach
Net Reaction for Concentration Cells
  • Concentration cells spontaneously dilute the concentrated side and concentrate the dilute side: MXn+(conc)→MXn+(dilute)\ce{M^{n+}(conc) -> M^{n+}(dilute)}.

  • Always write down the net cell reaction before formulating QQ to ensure you place the product (dilute) over the reactant (concentrated).

Spontaneity Sanity Check
  • A discharging galvanic/concentration cell operates spontaneously, which requires Ecell>0E_{\text{cell}} > 0.

  • Whenever you compute a negative EcellE_{\text{cell}} for a galvanic cell, immediately check whether you inverted the numerator and denominator in QQ.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the overall cell equation: AgX+(aq,conc,Compartment1)→AgX+(aq,dilute,Compartment2)\ce{Ag+(aq, conc, Compartment 1) -> Ag+(aq, dilute, Compartment 2)}.

  2. Set up the reaction quotient: Q=[AgX+]2[AgX+]1=1.00×10−61.00=1.00×10−6Q = \frac{[\ce{Ag+}]_2}{[\ce{Ag+}]_1} = \frac{1.00 \times 10^{-6}}{1.00} = 1.00 \times 10^{-6}.

  3. Substitute into the Nernst equation: Ecell=0.00 V−0.0592 V1log⁡10(1.00×10−6)E_{\text{cell}} = 0.00\text{ V} - \frac{0.0592\text{ V}}{1}\log_{10}(1.00 \times 10^{-6}).

  4. Evaluate the logarithm: log⁡10(10−6)=−6\log_{10}(10^{-6}) = -6, so Ecell=−0.0592 V×(−6)=+0.355 VE_{\text{cell}} = -0.0592\text{ V} \times (-6) = +0.355\text{ V}.

Final answer

Ecell=+0.355 VE_{\text{cell}} = +0.355\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the net cell reaction explicitly before writing QQ, verifying that the dilute ions are on the product side.

  • Use the memory aid Q=[dilute][concentrated]Q = \frac{[\text{dilute}]}{[\text{concentrated}]} for any standard concentration cell.

  • Check that Ecell>0E_{\text{cell}} > 0 for any spontaneous cell under standard-like discharging conditions.

OverviewACEpath Teacher's Diagnosis

03 The student uses an incorrect sign in the Nernst equation, writing a plus sign instead of a minus sign before the logarithmic term.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Oxidation occurs at the lower concentration, so Compartment 2 is the anode. ⟹ Electrons flow from anode to cathode, so from Compartment 2 to Compartment 1.

  2. Step 2

    Ecell∘=0 V,  n=1  ⟹  Q=[Ag+]2[Ag+]1=1.00×10−61.00=1.00×10−6E^\circ_{\text{cell}} = 0\text{ V},\; n = 1 \implies Q = \frac{[\text{Ag}^+]_2}{[\text{Ag}^+]_1} = \frac{1.00 \times 10^{-6}}{1.00} = 1.00 \times 10^{-6}

  3. Step 3

    Ecell=Ecell∘+0.0592nlog⁡QE_{\text{cell}} = E^\circ_{\text{cell}} + \frac{0.0592}{n}\log Q

    Correct

    Ecell=Ecell∘−0.0592nlog⁡QE_{\text{cell}} = E^\circ_{\text{cell}} - \frac{0.0592}{n}\log Q

    You wrote a plus sign before the logarithmic term in the Nernst equation instead of a minus sign.

  4. Step 4

    Ecell=0+0.0592log⁡(1.00×10−6)  ⟹  Ecell=0.0592×(−6)=−0.355 VE_{\text{cell}} = 0 + 0.0592\log(1.00 \times 10^{-6}) \implies E_{\text{cell}} = 0.0592 \times (-6) = -0.355\text{ V}

    Correct

    Ecell=0.00 V−0.0592 V1log⁡(1.00×10−6)=+0.355 VE_{\text{cell}} = 0.00\text{ V} - \frac{0.0592\text{ V}}{1}\log(1.00 \times 10^{-6}) = +0.355\text{ V}

    Your evaluation followed your written formula correctly, but the initial sign error produced a negative instantaneous cell potential rather than the spontaneous positive value +0.355 V+0.355\text{ V}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the oxidation site and direction of electron flow based on concentration differences.

You correctly determined Ecell∘=0 VE^\circ_{\text{cell}} = 0\text{ V} and n=1n = 1 for a silver concentration cell.

You correctly formulated the reaction quotient Q=[Ag+]2[Ag+]1=1.00×10−6Q = \frac{[\text{Ag}^+]_2}{[\text{Ag}^+]_1} = 1.00 \times 10^{-6}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula sign error

You accidentally placed a plus sign in front of the logarithmic term in the Nernst equation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the standard Nernst equation form E=E∘−0.0592nlog⁡QE = E^\circ - \frac{0.0592}{n}\log Q with an alternative form that inverts QQ, leading to an unphysical negative cell voltage for a spontaneous concentration cell.

REASONING PATH
Your ACEpath teacher’s suggested approach
Nernst Equation Standard Sign
  • The standard Nernst equation at 298 K298\text{ K} is Ecell=Ecell∘−0.0592nlog⁡10QE_{\text{cell}} = E^\circ_{\text{cell}} - \frac{0.0592}{n}\log_{10} Q.

  • Always write the minus sign before 0.0592nlog⁡Q\frac{0.0592}{n}\log Q, deriving it directly from ΔG=ΔG∘+RTln⁡Q\Delta G = \Delta G^\circ + RT\ln Q divided by −nF-nF.

Spontaneous Cell Potential Check
  • A concentration cell discharges spontaneously toward equal concentrations, meaning Ecell>0E_{\text{cell}} > 0.

  • Whenever you calculate EcellE_{\text{cell}} for a discharging concentration cell, verify that the resulting potential is positive.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the correct standard Nernst equation: Ecell=Ecell∘−0.0592 Vnlog⁡10QE_{\text{cell}} = E^\circ_{\text{cell}} - \frac{0.0592\text{ V}}{n}\log_{10} Q.

  2. Substitute the known values: Ecell=0.00 V−0.0592 V1log⁡10(1.00×10−6)E_{\text{cell}} = 0.00\text{ V} - \frac{0.0592\text{ V}}{1}\log_{10}(1.00 \times 10^{-6}).

  3. Evaluate the logarithm: log⁡10(10−6)=−6\log_{10}(10^{-6}) = -6.

  4. Multiply: Ecell=−0.0592 V×(−6)=+0.3552 VE_{\text{cell}} = -0.0592\text{ V} \times (-6) = +0.3552\text{ V}.

Final answer

+0.355 V

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the thermodynamic derivation of the Nernst equation to solidify why the sign before the log term is negative.

  • Use the physical reality of the cell (Ecell>0E_{\text{cell}} > 0 for spontaneous forward reaction) as an automatic sanity check on your final value.

Lock it in

Similar question

01

A zinc concentration cell is built with two Zn(s)\ce{Zn(s)} electrodes at 298 K298\text{ K}. Compartment A contains [ZnX2+]=0.010 M[\ce{Zn^{2+}}] = 0.010\text{ M} and Compartment B contains [ZnX2+]=2.0 M[\ce{Zn^{2+}}] = 2.0\text{ M}. Identify the anode, the cathode, and the direction of electron flow.

Answer

Anode: Compartment A (dilute solution oxidizes to produce ZnX2+\ce{Zn^{2+}}); Cathode: Compartment B (concentrated solution reduces ZnX2+\ce{Zn^{2+}} to Zn\ce{Zn}); Electron flow: from Compartment A to Compartment B through the external circuit.

02

A nickel concentration cell at 298 K298\text{ K} consists of two Ni(s)\ce{Ni(s)} electrodes with [NiX2+]=0.10 M[\ce{Ni^{2+}}] = 0.10\text{ M} in the cathode compartment. If the measured cell potential is +0.0592 V+0.0592\text{ V}, calculate the concentration of NiX2+\ce{Ni^{2+}} in the anode compartment. (Use 2.303RTF=0.0592 V\frac{2.303RT}{F} = 0.0592\text{ V} and n=2n = 2.)

Answer

[NiX2+]anode=1.0×10−3 M[\ce{Ni^{2+}}]_{\text{anode}} = 1.0 \times 10^{-3}\text{ M}. Using Ecell=0−0.05922log⁡10Q  ⟹  +0.0592=−0.0296log⁡10Q  ⟹  log⁡10Q=−2  ⟹  Q=10−2E_{\text{cell}} = 0 - \frac{0.0592}{2}\log_{10} Q \implies +0.0592 = -0.0296\log_{10} Q \implies \log_{10} Q = -2 \implies Q = 10^{-2}. Since Q=[NiX2+]anode[NiX2+]cathode=[NiX2+]anode0.10=0.01Q = \frac{[\ce{Ni^{2+}}]_{\text{anode}}}{[\ce{Ni^{2+}}]_{\text{cathode}}} = \frac{[\ce{Ni^{2+}}]_{\text{anode}}}{0.10} = 0.01, we find [NiX2+]anode=1.0×10−3 M[\ce{Ni^{2+}}]_{\text{anode}} = 1.0 \times 10^{-3}\text{ M}.

03

An electrochemical cell has two hydrogen electrodes immersed in different acid solutions at 298 K298\text{ K} with PHX2=1.0 atmP_{\ce{H2}} = 1.0\text{ atm}. Compartment 1 has pH=2.00\text{pH} = 2.00 and Compartment 2 has pH=5.00\text{pH} = 5.00. Identify the anode and determine the cell potential EcellE_{\text{cell}} using 2.303RTF=0.0592 V\frac{2.303RT}{F} = 0.0592\text{ V}.

Answer

Anode: Compartment 2; Ecell=+0.178 VE_{\text{cell}} = +0.178\text{ V}. Compartment 2 has [HX+]=10−5.00 M[\ce{H+}] = 10^{-5.00}\text{ M} (more dilute), so it oxidizes HX2→2 HX++2 eX−\ce{H2 -> 2H+ + 2e-} and acts as the anode. Compartment 1 has [HX+]=10−2.00 M[\ce{H+}] = 10^{-2.00}\text{ M} and acts as the cathode. For the net process HX+(conc)→HX+(dilute)\ce{H+(conc) -> H+(dilute)}, Ecell=−0.0592log⁡10(10−510−2)=−0.0592×(−3)=+0.1776 V≈+0.178 VE_{\text{cell}} = -0.0592\log_{10}\left(\frac{10^{-5}}{10^{-2}}\right) = -0.0592 \times (-3) = +0.1776\text{ V} \approx +0.178\text{ V} (or via Ecell=0.0592×ΔpH=0.0592×3=+0.178 VE_{\text{cell}} = 0.0592 \times \Delta\text{pH} = 0.0592 \times 3 = +0.178\text{ V}).

Loading workspace…