Resources

In a closed system, powdered calcium carbonate undergoes thermal decomposition: CaCO3(s)→CaO(s)+CO2(g)\text{CaCO}_3(s) \rightarrow \text{CaO}(s) + \text{CO}_2(g). A sample of 50.04 g50.04\text{ g} of pure CaCO3\text{CaCO}_3 decomposes completely to form 28.04 g28.04\text{ g} of solid calcium oxide (CaO\text{CaO}) and carbon dioxide gas. Using the law of conservation of mass, calculate the mass of CO2(g)\text{CO}_2(g) produced and determine the mass percentage of the original reactant that was converted into gaseous products.

Answer and steps

Final answer

Mass of CO2=50.04 g−28.04 g=22.00 g\text{Mass of CO}_2 = 50.04\text{ g} - 28.04\text{ g} = 22.00\text{ g}; Percent mass lost to gas phase =(22.00 g50.04 g)×100%=43.96%= \left(\frac{22.00\text{ g}}{50.04\text{ g}}\right) \times 100\% = 43.96\%.

Steps

01

Apply the Law of Conservation of Mass

The law of conservation of mass states that in a closed system, matter is neither created nor destroyed during a chemical reaction. Therefore, the total mass of the reactants must equal the total mass of the products:

Mass of reactants=Total mass of products\text{Mass of reactants} = \text{Total mass of products}

For the decomposition reaction: CaCOX3(s)→CaO(s)+COX2(g)\ce{CaCO3(s) -> CaO(s) + CO2(g)}

The mass relationship is: Mass of CaCOX3=Mass of CaO+Mass of COX2\text{Mass of }\ce{CaCO3} = \text{Mass of }\ce{CaO} + \text{Mass of }\ce{CO2}


02

Calculate the Mass of COX2\ce{CO2} Produced

Rearrange the equation to solve for the mass of carbon dioxide gas:

Mass of COX2=Mass of CaCOX3−Mass of CaO\text{Mass of }\ce{CO2} = \text{Mass of }\ce{CaCO3} - \text{Mass of }\ce{CaO}

Substitute the given values:

Mass of COX2=50.04 g−28.04 g=22.00 g\text{Mass of }\ce{CO2} = 50.04\text{ g} - 28.04\text{ g} = 22.00\text{ g}

Common Pitfall: If this reaction were carried out in an open vessel rather than a closed system, the gaseous COX2\ce{CO2} would escape into the surroundings. This would cause an apparent decrease in mass on a balance, even though mass is still fundamentally conserved overall.


03

Calculate the Mass Percentage Converted into Gas

To find the percentage of the initial reactant that converted into the gaseous phase, divide the mass of COX2\ce{CO2} produced by the initial mass of CaCOX3\ce{CaCO3} and multiply by 100%100\%:

Mass percentage of gas=(Mass of COX2Mass of CaCOX3)×100%\text{Mass percentage of gas} = \left(\frac{\text{Mass of }\ce{CO2}}{\text{Mass of }\ce{CaCO3}}\right) \times 100\%

Mass percentage of gas=(22.00 g50.04 g)×100%≈43.96%\text{Mass percentage of gas} = \left(\frac{22.00\text{ g}}{50.04\text{ g}}\right) \times 100\% \approx 43.96\%

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the percentage using the solid residue (CaO) rather than the gaseous product (CO₂).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    mass of COX2=50.04 g−28.04 g  ⟹  mass of COX2=22.00 g\text{mass of } \ce{CO2} = 50.04\text{ g} - 28.04\text{ g} \implies \text{mass of } \ce{CO2} = 22.00\text{ g}

  2. Step 2

    percentage=(28.04 g50.04 g)×100%  ⟹  percentage=56.04%\text{percentage} = \left(\frac{28.04\text{ g}}{50.04\text{ g}}\right) \times 100\% \implies \text{percentage} = 56.04\%

    Correct

    Percentage of gas=(22.00 g50.04 g)×100%≈43.96%\text{Percentage of gas} = \left(\frac{22.00\text{ g}}{50.04\text{ g}}\right) \times 100\% \approx 43.96\%

    You placed the mass of solid residue (28.04 g28.04\text{ g} of CaO\ce{CaO}) in the numerator, but the question specifically asks for the percentage converted into gaseous products (COX2\ce{CO2}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the law of conservation of mass to calculate that 22.00 g22.00\text{ g} of COX2\ce{CO2} was produced.

You set up the percentage calculation structure correctly by dividing a product mass by the initial reactant mass and multiplying by 100%100\%.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Wrong variable substituted

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You selected the mass of the remaining solid product (CaO) rather than the mass of the gaseous product (CO₂) when computing the mass percentage converted into gas.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the target product in the question
  • The numerator of a mass percentage must correspond strictly to the substance requested in the prompt.

  • Check whether the question asks for the solid residue or the gaseous product before substituting into the numerator.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the mass of the gaseous product (COX2\ce{CO2}) in the numerator: Mass of COX2=22.00 g\text{Mass of } \ce{CO2} = 22.00\text{ g}.

  2. Divide by the total initial mass of reactant: 22.00 g50.04 g×100%≈43.96%\frac{22.00\text{ g}}{50.04\text{ g}} \times 100\% \approx 43.96\%.

Final answer

Mass of COX2=22.00 g\text{Mass of } \ce{CO2} = 22.00\text{ g}; Percentage converted to gas =43.96%= 43.96\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Re-read the question prompt to identify which specific phase or product is requested in the ratio.

  • Write descriptive labels on your calculated values (for example, mCOX2m_{\ce{CO2}} and mCaOm_{\ce{CaO}}) to prevent mixing them up.

OverviewACEpath Teacher's Diagnosis

02 The student misapplies conservation of mass by adding the product mass to the reactant mass instead of subtracting it to find the missing gas.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    mass of COX2=50.04 g+28.04 g  ⟹  mass of COX2=78.08 g\text{mass of } \ce{CO2} = 50.04\text{ g} + 28.04\text{ g} \implies \text{mass of } \ce{CO2} = 78.08\text{ g}

    Correct

    Mass of COX2=50.04 g−28.04 g=22.00 g\text{Mass of } \ce{CO2} = 50.04\text{ g} - 28.04\text{ g} = 22.00\text{ g}

    You added the initial mass of reactant CaCOX3\ce{CaCO3} to the product mass of CaO\ce{CaO}. According to the law of conservation of mass, Mass of Reactants=Mass of Products\text{Mass of Reactants} = \text{Mass of Products}, so Mass of COX2=Mass of CaCOX3−Mass of CaO\text{Mass of } \ce{CO2} = \text{Mass of } \ce{CaCO3} - \text{Mass of } \ce{CaO}.

  2. Step 2

    percentage=(78.08 g50.04 g)×100%  ⟹  percentage=156.04%\text{percentage} = \left(\frac{78.08\text{ g}}{50.04\text{ g}}\right) \times 100\% \implies \text{percentage} = 156.04\%

    Correct

    Percentage=(22.00 g50.04 g)×100%≈43.96%\text{Percentage} = \left(\frac{22.00\text{ g}}{50.04\text{ g}}\right) \times 100\% \approx 43.96\%

    You correctly set up the ratio of gas mass to original sample mass, but substituting the incorrect gas mass from Step 1 produced an impossible value over 100%100\%.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up the percentage calculation by dividing the gas mass by the initial reactant mass and multiplying by 100%100\%.

You maintained clear units and straightforward arithmetic steps throughout your written solution.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misapplied conservation of mass equation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the given numbers as additive terms rather than applying the conservation relationship Total Reactant Mass=Total Product Mass\text{Total Reactant Mass} = \text{Total Product Mass}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Set Up Reactant = Product
  • For a chemical reaction A→B+C\ce{A -> B + C}, the conservation equation is m(A)=m(B)+m(C)m(\ce{A}) = m(\ce{B}) + m(\ce{C}).

  • Always write out the mass equation under the balanced reaction before inserting values and isolating the unknown variable.

Sanity Check Percentages
  • A single product component formed from a pure reactant cannot exceed 100%100\% of the reactant's mass.

  • If your mass percentage of a single product exceeds 100%100\%, recheck whether you added terms that should have been subtracted.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the law of conservation of mass: m(CaCOX3)=m(CaO)+m(COX2)m(\ce{CaCO3}) = m(\ce{CaO}) + m(\ce{CO2}).

  2. Substitute the given quantities: 50.04 g=28.04 g+m(COX2)50.04\text{ g} = 28.04\text{ g} + m(\ce{CO2}).

  3. Isolate the mass of carbon dioxide: m(COX2)=50.04 g−28.04 g=22.00 gm(\ce{CO2}) = 50.04\text{ g} - 28.04\text{ g} = 22.00\text{ g}.

  4. Compute the mass percentage converted into gas: (22.00 g50.04 g)×100%≈43.96%\left(\frac{22.00\text{ g}}{50.04\text{ g}}\right) \times 100\% \approx 43.96\%.

Final answer

Mass of COX2=22.00 g\text{Mass of } \ce{CO2} = 22.00\text{ g}; Percentage=43.96%\text{Percentage} = 43.96\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the word equation 'Reactant Mass = Product Mass' before plugging in numbers.

  • Practice isolating an unknown product mass when one reactant decomposes into multiple products.

  • Perform a quick reality check on all percentage yields and mass fractions to ensure they remain below 100%100\%.

OverviewACEpath Teacher's Diagnosis

03 The student divides the mass of CO₂ by the mass of the solid product CaO instead of the initial reactant CaCO₃.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    mass of COX2=50.04 g−28.04 g=22.00 g\text{mass of } \ce{CO2} = 50.04\text{ g} - 28.04\text{ g} = 22.00\text{ g}

  2. Step 2

    percentage=(22.00 g28.04 g)×100%  ⟹  78.46%\text{percentage} = \left(\frac{22.00\text{ g}}{28.04\text{ g}}\right) \times 100\% \implies 78.46\%

    Correct

    percentage=(22.00 g50.04 g)×100%≈43.96%\text{percentage} = \left(\frac{22.00\text{ g}}{50.04\text{ g}}\right) \times 100\% \approx 43.96\%

    You divided by 28.04 g28.04\text{ g} (the mass of the remaining solid product, CaO\ce{CaO}) instead of 50.04 g50.04\text{ g} (the total initial mass of reactant, CaCOX3\ce{CaCO3}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the law of conservation of mass to determine the mass of carbon dioxide gas produced.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Denominator Selection Error in Mass Percentage

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the remaining solid product with the original reactant when setting up the base for the percentage calculation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the Reference Base
  • When calculating the percentage of an initial reactant converted into a product, the denominator must always be the starting mass of that reactant.

  • Always verify the wording of the prompt: if it asks for the percentage of the original reactant, divide by the starting mass (50.04 g50.04\text{ g}), not another product (28.04 g28.04\text{ g}).

Reasonableness Check
  • The mass percentage of a single product formed from one reactant cannot exceed 100%100\%, and dividing by a smaller product will artificially inflate the percentage.

  • Check that your denominator represents the total whole (100%100\%) from which the gas was liberated.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the fraction using the initial mass of CaCOX3\ce{CaCO3} (50.04 g50.04\text{ g}) as the denominator: 22.00 g50.04 g×100%\frac{22.00\text{ g}}{50.04\text{ g}} \times 100\%

  2. Evaluate the expression: 22.0050.04≈0.439648\frac{22.00}{50.04} \approx 0.439648

  3. Multiply by 100%100\% to get 43.96%43.96\%

Final answer

Mass of COX2=22.00 g\text{Mass of } \ce{CO2} = 22.00\text{ g}; Percentage=43.96%\text{Percentage} = 43.96\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Always circle or underline the starting reactant mass before setting up percentage calculations.

  • Practice identifying whether a percentage question asks for 'percent yield', 'percent of initial reactant', or 'mass ratio between products'.

Lock it in

Similar question

01

A 40.00 g40.00\text{ g} sample of magnesium carbonate (MgCOX3\ce{MgCO3}) decomposes completely into solid magnesium oxide (MgO\ce{MgO}) and carbon dioxide gas (COX2\ce{CO2}). After heating in a closed system, 19.13 g19.13\text{ g} of MgO\ce{MgO} remains. Calculate the mass of COX2\ce{CO2} produced and the mass percentage of the initial reactant converted into gas.

Answer

Mass of COX2=40.00 g−19.13 g=20.87 g\text{Mass of } \ce{CO2} = 40.00\text{ g} - 19.13\text{ g} = 20.87\text{ g}. Percentage converted to gas =(20.87 g40.00 g)×100%≈52.18%= \left(\frac{20.87\text{ g}}{40.00\text{ g}}\right) \times 100\% \approx 52.18\%.

02

Solid sodium hydrogen carbonate decomposes upon heating: 2 NaHCOX3(s)→NaX2COX3(s)+HX2O(g)+COX2(g)\ce{2NaHCO3(s) -> Na2CO3(s) + H2O(g) + CO2(g)}. A student heats 16.80 g16.80\text{ g} of NaHCOX3\ce{NaHCO3} completely and collects 10.60 g10.60\text{ g} of solid NaX2COX3\ce{Na2CO3}. What total mass of gaseous products is produced, and what percentage of the initial mass was lost as gas?

Answer

Total gaseous mass =16.80 g−10.60 g=6.20 g= 16.80\text{ g} - 10.60\text{ g} = 6.20\text{ g}. Percentage converted to gas =(6.20 g16.80 g)×100%≈36.90%= \left(\frac{6.20\text{ g}}{16.80\text{ g}}\right) \times 100\% \approx 36.90\%.

03

A hydrated copper(II) sulfate salt, CuSOX4 ⋅5 HX2O\ce{CuSO4 \cdot 5H2O}, is heated until all water is driven off as water vapor: CuSOX4 ⋅5 HX2O(s)→CuSOX4(s)+5 HX2O(g)\ce{CuSO4 \cdot 5H2O(s) -> CuSO4(s) + 5H2O(g)}. Starting with 25.00 g25.00\text{ g} of the hydrate, 15.98 g15.98\text{ g} of anhydrous solid remains. Determine the mass of water vapor released, the percentage of water by mass in the hydrate, and the percentage of solid residue remaining.

Answer

Mass of HX2O=25.00 g−15.98 g=9.02 g\text{Mass of } \ce{H2O} = 25.00\text{ g} - 15.98\text{ g} = 9.02\text{ g}. Percent converted to gas (water) =(9.02 g25.00 g)×100%=36.08%= \left(\frac{9.02\text{ g}}{25.00\text{ g}}\right) \times 100\% = 36.08\%. Percent solid residue =(15.98 g25.00 g)×100%=63.92%= \left(\frac{15.98\text{ g}}{25.00\text{ g}}\right) \times 100\% = 63.92\%.

Loading workspace…