Resources

A student monitors the aqueous equilibrium Fe3+(aq)+SCN−(aq)⇌[Fe(SCN)]2+(aq)\text{Fe}^{3+}(aq) + \text{SCN}^-(aq) \rightleftharpoons [\text{Fe}(\text{SCN})]^{2+}(aq) (blood-red complex). At equilibrium at 298 K298\text{ K}, [Fe3+]=1.20×10−3 M[\text{Fe}^{3+}] = 1.20 \times 10^{-3}\text{ M}, [SCN−]=8.00×10−4 M[\text{SCN}^-] = 8.00 \times 10^{-4}\text{ M}, and [[Fe(SCN)]2+]=1.35×10−4 M[[\text{Fe}(\text{SCN})]^{2+}] = 1.35 \times 10^{-4}\text{ M}, giving Kc=1.41×102 M−1K_c = 1.41 \times 10^2\text{ M}^{-1}. The student claims: 'Because the solution color stops changing and absorbance remains constant at A=0.680A = 0.680, the chemical reaction has stopped, meaning ΔG∘=0\Delta G^{\circ} = 0 and all microscopic processes have ceased.' Identify two distinct conceptual/convention errors in the student's statement, and calculate the actual standard Gibbs free energy change ΔG∘\Delta G^{\circ} at 298 K298\text{ K} using R=8.314 J⋅mol−1⋅K−1R = 8.314\text{ J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1}.

Answer and steps

Final answer

Error 1: Conflating macroscopic constancy with molecular cessation; equilibrium is dynamic with equal forward and reverse rates, not static. Error 2: Conflating ΔG\Delta G with ΔG∘\Delta G^{\circ}; at dynamic equilibrium ΔG=0\Delta G = 0, whereas ΔG∘=−RTln⁡Kc\Delta G^{\circ} = -RT\ln K_c. Calculation: ΔG∘=−(8.314)(298)ln⁡(141)=−1.22×104 J/mol=−12.2 kJ/mol\Delta G^{\circ} = -(8.314)(298)\ln(141) = -1.22 \times 10^4\text{ J/mol} = -12.2\text{ kJ/mol}.

Steps

Identifying the Conceptual Errors

Error 1: Confusing dynamic equilibrium with a static cessation of reaction

  • The Error: The student claims that because the color and absorbance are constant, the chemical reaction has stopped and all microscopic processes have ceased.
  • The Correction: Chemical equilibrium is dynamic, not static. Even though macroscopic properties such as color, concentration, and absorbance remain constant over time, microscopic processes continue unabated. The forward reaction FeX3+(aq)+SCNX−(aq)→[Fe(SCN)]X2+(aq)\ce{Fe^{3+}(aq) + SCN^-(aq) -> [Fe(SCN)]^{2+}(aq)} and the reverse reaction [Fe(SCN)]X2+(aq)→FeX3+(aq)+SCNX−(aq)\ce{[Fe(SCN)]^{2+}(aq) -> Fe^{3+}(aq) + SCN^-(aq)} proceed at equal, non-zero rates: rforward=rreverse>0r_{\text{forward}} = r_{\text{reverse}} > 0 Because products are formed at the exact rate they are consumed, no net change in composition occurs.

Error 2: Confusing ΔG\Delta G with ΔG∘\Delta G^{\circ}

  • The Error: The student claims that reaching equilibrium means ΔG∘=0\Delta G^{\circ} = 0.
  • The Correction: At dynamic equilibrium, the actual Gibbs free energy change of the system at the current composition is zero: ΔG=0\Delta G = 0 In contrast, the standard Gibbs free energy change ΔG∘\Delta G^{\circ} applies specifically when all reactants and products are in their thermodynamic standard states (1 M1\text{ M} concentrations for solutes). It is a fixed constant at a given temperature and is related to the equilibrium constant by: ΔG∘=−RTln⁡K\Delta G^{\circ} = -RT\ln K Therefore, ΔG∘=0\Delta G^{\circ} = 0 only if K=1K = 1. Since Kc=1.41×102≠1K_c = 1.41 \times 10^2 \neq 1, ΔG∘≠0\Delta G^{\circ} \neq 0.

Calculating the Standard Gibbs Free Energy Change (ΔG∘\Delta G^{\circ})

Using the thermodynamic relation between ΔG∘\Delta G^{\circ} and the equilibrium constant KK: ΔG∘=−RTln⁡K\Delta G^{\circ} = -RT \ln K

Substitute the given values (R=8.314 J⋅mol−1⋅K−1R = 8.314\text{ J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1}, T=298 KT = 298\text{ K}, and K=141K = 141): ΔG∘=−(8.314 J⋅mol−1⋅K−1)(298 K)ln⁡(141)\Delta G^{\circ} = -(8.314\text{ J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1})(298\text{ K}) \ln(141)

Calculate the logarithmic factor: ln⁡(141)≈4.949\ln(141) \approx 4.949

Multiply the terms: ΔG∘≈−(2477.57 J⋅mol−1)(4.949)≈−1.22×104 J⋅mol−1=−12.2 kJ⋅mol−1\Delta G^{\circ} \approx -(2477.57\text{ J}\cdot\text{mol}^{-1})(4.949) \approx -1.22 \times 10^4\text{ J}\cdot\text{mol}^{-1} = -12.2\text{ kJ}\cdot\text{mol}^{-1}

The negative sign of ΔG∘\Delta G^{\circ} confirms that the formation of the complex ion [Fe(SCN)]2+[\ce{Fe(SCN)}]^{2+} is thermodynamically favored under standard-state conditions at 298 K298\text{ K}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student omits the negative sign in the relationship between ΔG° and K, calculating ΔG° = RT ln(K) instead of ΔG° = -RT ln(K).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Equilibrium is dynamic, so forward and reverse reactions continue at equal rates rather than stopping. Microscopic processes do not cease.

  2. Step 2

    The student confused ΔG\Delta G with ΔG∘\Delta G^{\circ}. At equilibrium, ΔG=0\Delta G = 0, but ΔG∘\Delta G^{\circ} is not necessarily 00.

  3. Step 3

    ΔG∘=RTln⁡(K)\Delta G^{\circ} = RT\ln(K)

    Correct

    ΔG∘=−RTln⁡(K)\Delta G^{\circ} = -RT\ln(K)

    You omitted the required negative sign in the relationship between ΔG∘\Delta G^{\circ} and the equilibrium constant KK.

  4. Step 4

    ΔG∘=(8.314)(298)ln⁡(141)⟹ΔG∘=(2477.57)(4.949)=12261 J/mol⟹ΔG∘=12.3 kJ/mol\Delta G^{\circ} = (8.314)(298)\ln(141) \Longrightarrow \Delta G^{\circ} = (2477.57)(4.949) = 12261\text{ J/mol} \Longrightarrow \Delta G^{\circ} = 12.3\text{ kJ/mol}

    Correct

    ΔG∘=−(8.314)(298)ln⁡(141)=−1.22×104 J/mol=−12.2 kJ/mol\Delta G^{\circ} = -(8.314)(298)\ln(141) = -1.22 \times 10^4\text{ J/mol} = -12.2\text{ kJ/mol}

    Your numerical arithmetic was carried out accurately, but the resulting sign is positive because of the formula error in the preceding step.

WHAT YOU DID WELL
Compliments from Your Teacher

You clearly articulated that chemical equilibrium is dynamic with equal forward and reverse rates.

You correctly pointed out that ΔG=0\Delta G = 0 at equilibrium, whereas ΔG∘\Delta G^{\circ} depends on the equilibrium constant KK.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign Error in Thermodynamic Formula

You forgot the leading negative sign in the equation relating ΔG∘\Delta G^{\circ} and KK.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the derivation from ΔG=ΔG∘+RTln⁡Q\Delta G = \Delta G^{\circ} + RT\ln Q. Setting ΔG=0\Delta G = 0 and Q=KQ = K yields 0=ΔG∘+RTln⁡K0 = \Delta G^{\circ} + RT\ln K, which rearranges to ΔG∘=−RTln⁡K\Delta G^{\circ} = -RT\ln K. A product-favored reaction (K>1K > 1) must correspond to a thermodynamically favored standard state (ΔG∘<0\Delta G^{\circ} < 0).

REASONING PATH
Your ACEpath teacher’s suggested approach
Thermodynamic Sign Check
  • For any reaction with K>1K > 1, products are favored at standard conditions, which requires ΔG∘<0\Delta G^{\circ} < 0.

  • Always verify that your calculated sign matches the magnitude of KK: if K>1K > 1, ln⁡K>0\ln K > 0, so ΔG∘=−RTln⁡K\Delta G^{\circ} = -RT\ln K must be negative.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute the given values with the negative sign: ΔG∘=−(8.314 J/(mol⋅K))(298 K)ln⁡(141)\Delta G^{\circ} = -(8.314\text{ J}/(\text{mol}\cdot\text{K}))(298\text{ K})\ln(141)

  2. Evaluate the product: ΔG∘=−(2477.57 J/mol)(4.949)≈−12260 J/mol\Delta G^{\circ} = -(2477.57\text{ J}/\text{mol})(4.949) \approx -12260\text{ J}/\text{mol}

  3. Convert to kilojoules per mole: ΔG∘≈−12.2 kJ/mol\Delta G^{\circ} \approx -12.2\text{ kJ}/\text{mol} (or −12.3 kJ/mol-12.3\text{ kJ}/\text{mol} depending on intermediate rounding).

Final answer

ΔG∘=−12.2 kJ/mol\Delta G^{\circ} = -12.2\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the derivation 0=ΔG∘+RTln⁡K  ⟹  ΔG∘=−RTln⁡K0 = \Delta G^{\circ} + RT\ln K \implies \Delta G^{\circ} = -RT\ln K so you never lose the negative sign.

  • Perform a sanity check on the sign of ΔG∘\Delta G^{\circ} whenever you calculate it from KK.

OverviewACEpath Teacher's Diagnosis

02 The student mistakenly uses the common logarithm base 10 instead of the natural logarithm in ΔG° = -RT ln(K).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Chemical equilibrium is dynamic, meaning the forward and reverse microscopic reactions proceed at equal rates rather than halting entirely.

  2. Step 2

    The student confused ΔG\Delta G with ΔG∘\Delta G^{\circ}: At equilibrium, ΔG=0\Delta G = 0, whereas ΔG∘\Delta G^{\circ} is determined by the equilibrium constant.

  3. Step 3

    ΔG∘=−RTlog⁡(K)  ⟹  ΔG∘=−(8.314)(298)log⁡(141)  ⟹  ΔG∘=−(2477.57)(2.149)  ⟹  ΔG∘=−5324 J/mol=−5.32 kJ/mol\Delta G^{\circ} = -RT \log(K) \implies \Delta G^{\circ} = -(8.314)(298) \log(141) \implies \Delta G^{\circ} = -(2477.57)(2.149) \implies \Delta G^{\circ} = -5324\text{ J/mol} = -5.32\text{ kJ/mol}

    Correct

    ΔG∘=−RTln⁡(K)=−(8.314)(298)ln⁡(141)=−(2477.57)(4.949)=−1.22×104 J/mol=−12.2 kJ/mol\Delta G^{\circ} = -RT \ln(K) = -(8.314)(298)\ln(141) = -(2477.57)(4.949) = -1.22 \times 10^4\text{ J/mol} = -12.2\text{ kJ/mol}

    You used the common logarithm log⁡10(141)≈2.149\log_{10}(141) \approx 2.149 instead of the natural logarithm ln⁡(141)≈4.949\ln(141) \approx 4.949. The fundamental thermodynamic relation derived from ∫VRT dP\int \frac{V}{RT}\,dP uses base ee.

WHAT YOU DID WELL
Compliments from Your Teacher

You clearly identified that chemical equilibrium is dynamic with equal forward and reverse rates.

You correctly pointed out the confusion between ΔG=0\Delta G = 0 at equilibrium and the non-zero standard state value ΔG∘\Delta G^{\circ}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Logarithm Base Confusion in Free Energy Equation

You wrote and evaluated log⁡(K)\log(K) as base-10 rather than using the natural logarithm ln⁡(K)\ln(K).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing natural log (ln⁡\ln) with common log (log⁡10\log_{10}), or omitting the conversion factor 2.3032.303 when using common log in thermodynamic equations derived from ΔG=ΔG∘+RTln⁡Q\Delta G = \Delta G^{\circ} + RT\ln Q.

REASONING PATH
Your ACEpath teacher’s suggested approach
Thermodynamic Logarithm Base
  • Thermodynamic relations derived from calculus (such as ΔG∘=−RTln⁡K\Delta G^{\circ} = -RT\ln K and the Nernst equation) fundamentally use natural logarithm ln⁡\ln (base ee).

  • Whenever you see RTRT multiplying a log term, use the natural log key on your calculator (ln\\ln), or include 2.3032.303 if explicitly using log⁡10\log_{10}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. ΔG∘=−(8.314 J⋅mol−1⋅K−1)(298 K)ln⁡(141)\Delta G^{\circ} = -(8.314\text{ J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1})(298\text{ K})\ln(141)

  2. ΔG∘=−(2477.57 J/mol)(4.949)\Delta G^{\circ} = -(2477.57\text{ J/mol})(4.949)

  3. ΔG∘=−1.22×104 J/mol=−12.2 kJ/mol\Delta G^{\circ} = -1.22 \times 10^4\text{ J/mol} = -12.2\text{ kJ/mol}

Final answer

ΔG∘=−12.2 kJ/mol\Delta G^{\circ} = -12.2\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Check your calculator keys to ensure you hit 'ln' rather than 'log' when solving equilibrium thermodynamics problems.

  • Remember that ln⁡(x)=2.303log⁡10(x)\ln(x) = 2.303 \log_{10}(x), so using base-10 without the factor underestimates the magnitude by more than half.

OverviewACEpath Teacher's Diagnosis

03 The student misinterprets the dynamic nature of equilibrium and claims the error is that reaction rates are zero rather than non-zero.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    The reaction has not stopped because equilibrium only occurs when all reactants are completely consumed.

    Correct

    Equilibrium is dynamic: the reaction has not stopped because the forward and reverse reactions proceed continuously at equal, non-zero rates (rforward=rreverse>0r_{\text{forward}} = r_{\text{reverse}} > 0). Reactants are not completely consumed; both reactants and products remain present at constant non-zero concentrations.

    You correctly noted that the reaction has not stopped, but your reasoning is incorrect. A state where reactants are completely consumed describes a reaction that goes to completion, not an equilibrium state. In chemical equilibrium, reactants and products coexist indefinitely because the forward and reverse processes continue at identical rates.

  2. Step 2

    The absorbance is constant because the reaction is irreversible.

    Correct

    The absorbance is constant because $[ Fe\text{Fe}(SCN\text{SCN})^{2+}]$ remains constant over time due to equal forward and reverse reaction rates in a reversible system.

    Equilibrium can only occur in a reversible reaction. The absorbance remains constant because $[ [Fe\text{Fe}(SCN\text{SCN})]^{2+}]$ is being produced and consumed at the exact same rate, not because the reaction is irreversible.

  3. Step 3

    At equilibrium, ΔG=0\Delta G = 0, but ΔG∘\Delta G^{\circ} depends on KK via ΔG∘=−RTln⁡(K)\Delta G^{\circ} = -RT \ln(K).

  4. Step 4

    ΔG∘=−RTln⁡(K)  ⟹  ΔG∘=−(8.314)(298)ln⁡(141)  ⟹  ΔG∘=−(2477.57)(4.949)  ⟹  ΔG∘=−12.3 kJ/mol\Delta G^{\circ} = -RT \ln(K) \implies \Delta G^{\circ} = -(8.314)(298)\ln(141) \implies \Delta G^{\circ} = -(2477.57)(4.949) \implies \Delta G^{\circ} = -12.3\text{ kJ/mol}

WHAT YOU DID WELL
Compliments from Your Teacher

You clearly distinguished the dynamic equilibrium condition ΔG=0\Delta G = 0 from the standard-state property ΔG∘\Delta G^{\circ}.

You correctly recalled and applied the thermodynamic relationship ΔG∘=−RTln⁡K\Delta G^{\circ} = -RT \ln K.

You executed the arithmetic and unit conversion accurately to determine ΔG∘\Delta G^{\circ}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dynamic Equilibrium Misconception

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated chemical equilibrium with reaction completion and irreversibility, missing that equilibrium is intrinsically reversible and dynamic with equal forward and reverse reaction rates (rfwd=rrev>0r_{\text{fwd}} = r_{\text{rev}} > 0).

REASONING PATH
Your ACEpath teacher’s suggested approach
Dynamic Nature of Equilibrium
  • At chemical equilibrium, microscopic reactions do not stop; the forward and reverse rates are equal and non-zero (rfwd=rrev>0r_{\text{fwd}} = r_{\text{rev}} > 0).

  • State that macroscopic properties remain constant because species are generated and consumed at identical rates, while all reacting species remain present.

Equilibrium vs. Completion
  • Reactions that go to completion consume limiting reactants entirely, whereas equilibrium mixtures retain finite concentrations of all reactants and products.

  • Never characterize equilibrium as full reactant consumption; check that both reactants and products exist in dynamic balance.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State Error 1: The original claim conflates macroscopic constancy with microscopic cessation. Chemical equilibrium is dynamic, meaning forward and reverse reactions proceed at equal, non-zero rates (rforward=rreverse>0r_{\text{forward}} = r_{\text{reverse}} > 0), leaving all species at steady concentrations.

  2. State Error 2: The original claim conflates ΔG\Delta G with ΔG∘\Delta G^{\circ}. At equilibrium, ΔG=0\Delta G = 0, whereas ΔG∘=−RTln⁡Kc≠0\Delta G^{\circ} = -RT \ln K_c \neq 0 whenever Kc≠1K_c \neq 1.

  3. Evaluate ΔG∘\Delta G^{\circ}: ΔG∘=−(8.314 J⋅mol−1⋅K−1)(298 K)ln⁡(1.41×102)≈−1.23×104 J/mol=−12.3 kJ/mol\Delta G^{\circ} = -(8.314\text{ J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1})(298\text{ K})\ln(1.41 \times 10^2) \approx -1.23 \times 10^4\text{ J/mol} = -12.3\text{ kJ/mol}.

Final answer

Error 1: The reaction has not stopped; equilibrium is dynamic with equal forward and reverse rates (rfwd=rrev>0r_{\text{fwd}} = r_{\text{rev}} > 0). Error 2: At equilibrium ΔG=0\Delta G = 0, whereas ΔG∘=−RTln⁡K\Delta G^{\circ} = -RT\ln K. Calculation: ΔG∘=−12.3 kJ/mol\Delta G^{\circ} = -12.3\text{ kJ/mol}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between a dynamic balance of opposing rates and a static cessation of reaction.

  • Practice distinguishing between conditions that apply at equilibrium (ΔG=0\Delta G = 0, Q=KQ = K) and fixed standard thermodynamic parameters (ΔG∘=−RTln⁡K\Delta G^{\circ} = -RT \ln K).

Lock it in

Similar question

01

A reaction has an equilibrium constant Kp=4.50×10−2K_p = 4.50 \times 10^{-2} at 500 K500\text{ K}. Calculate ΔG∘\Delta G^{\circ} for this reaction in kJ/mol\text{kJ/mol} using R=8.314 J⋅mol−1⋅K−1R = 8.314\text{ J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1}.

Answer

ΔG∘=−RTln⁡Kp=−(8.314)(500)ln⁡(0.0450)≈−(4157)(−3.101)=+1.29×104 J/mol=+12.9 kJ/mol\Delta G^{\circ} = -RT\ln K_p = -(8.314)(500)\ln(0.0450) \approx -(4157)(-3.101) = +1.29 \times 10^4\text{ J/mol} = +12.9\text{ kJ/mol}.

02

For the gaseous equilibrium N2O4(g)⇌2NO2(g)\text{N}_2\text{O}_4(g) \rightleftharpoons 2\text{NO}_2(g), ΔG∘=+4.73 kJ/mol\Delta G^{\circ} = +4.73\text{ kJ/mol} at 298 K298\text{ K}. Determine whether K>1K > 1 or K<1K < 1, and calculate the numerical value of KK.

Answer

Because ΔG∘>0\Delta G^{\circ} > 0, the reaction is reactant-favored under standard conditions, so K<1K < 1. ln⁡K=−ΔG∘RT=−4730(8.314)(298)≈−1.909\ln K = -\frac{\Delta G^{\circ}}{RT} = -\frac{4730}{(8.314)(298)} \approx -1.909, giving K=e−1.909≈0.148K = e^{-1.909} \approx 0.148.

03

An aqueous equilibrium reaches a state where [extReactant]=0.50 M[ ext{Reactant}] = 0.50\text{ M} and [extProduct]=0.50 M[ ext{Product}] = 0.50\text{ M}, yielding Kc=1.00K_c = 1.00. What are the values of ΔG\Delta G and ΔG∘\Delta G^{\circ} at this point at 298 K298\text{ K}?

Answer

At equilibrium, ΔG=0\Delta G = 0. Because Kc=1.00K_c = 1.00, ΔG∘=−RTln⁡(1.00)=0 kJ/mol\Delta G^{\circ} = -RT\ln(1.00) = 0\text{ kJ/mol}. Here both ΔG\Delta G and ΔG∘\Delta G^{\circ} equal zero.

Loading workspace…