Resources

Consider the heterogeneous coupled equilibrium between sparingly soluble magnesium hydroxide and an ammonium buffer system at 25 ∘C25\text{ }^\circ\text{C}: (1) Mg(OH)2(s)⇌Mg2+(aq)+2OH−(aq)\text{Mg(OH)}_2(s) \rightleftharpoons \text{Mg}^{2+}(aq) + 2\text{OH}^-(aq), Ksp=5.61×10−12K_{\text{sp}} = 5.61 \times 10^{-12} (2) NH4+(aq)+OH−(aq)⇌NH3(aq)+H2O(l)\text{NH}_4^+(aq) + \text{OH}^-(aq) \rightleftharpoons \text{NH}_3(aq) + \text{H}_2\text{O}(l), K=1Kb=11.80×10−5=5.56×104K = \frac{1}{K_b} = \frac{1}{1.80 \times 10^{-5}} = 5.56 \times 10^4 Solid Mg(OH)2\text{Mg(OH)}_2 is suspended in an aqueous solution containing 0.150 M NH4Cl0.150\text{ M } \text{NH}_4\text{Cl} and 0.100 M NH30.100\text{ M } \text{NH}_3. (a) Using the Henderson-Hasselbalch equation and Le Châtelier's principle, predict whether the molar solubility of Mg(OH)2\text{Mg(OH)}_2 is higher in this buffer than in pure water. (b) Calculate the quantitative molar solubility (SS) of Mg(OH)2\text{Mg(OH)}_2 in this buffered solution.

Answer and steps

Final answer

(a) The molar solubility is significantly higher in the buffer because NH4+\text{NH}_4^+ removes OH−\text{OH}^- ions, shifting equilibrium (1) to the right; (b) S=0.0379 MS = 0.0379\text{ M}.

Steps

Part (a): Qualitative Prediction Using Le Châtelier's Principle

  1. Identify the individual equilibria: The dissolution of solid magnesium hydroxide is governed by: Mg(OH)X2(s)⇌MgX2+(aq)+2OHX−(aq)(Ksp=5.61×10−12)\ce{Mg(OH)2}(s) \rightleftharpoons \ce{Mg^2+}(aq) + 2\ce{OH-}(aq) \quad (K_{\text{sp}} = 5.61 \times 10^{-12})

    In pure water, OHX−\ce{OH-} ions accumulate in solution until equilibrium is reached, resulting in a very low molar solubility: Swater=Ksp43=5.61×10−1243≈1.12×10−4 MS_{\text{water}} = \sqrt[3]{\frac{K_{\text{sp}}}{4}} = \sqrt[3]{\frac{5.61 \times 10^{-12}}{4}} \approx 1.12 \times 10^{-4}\text{ M}

  2. Effect of the buffer: The buffer contains the weak acid NHX4X+\ce{NH4+} and its conjugate base NHX3\ce{NH3}. The NHX4X+\ce{NH4+} ions react with the OHX−\ce{OH-} ions released by the dissolving Mg(OH)X2\ce{Mg(OH)2}: NHX4X+(aq)+OHX−(aq)⇌NHX3(aq)+HX2O(l)\ce{NH4+}(aq) + \ce{OH-}(aq) \rightleftharpoons \ce{NH3}(aq) + \ce{H2O}(l)
  3. Apply Le Châtelier's principle: Because NHX4X+\ce{NH4+} continuously neutralizes and removes OHX−\ce{OH-} from solution, the concentration of OHX−(aq)\ce{OH-}(aq) is kept significantly lower than it would be in an unbuffered solution. According to Le Châtelier's principle, removing a product shifts the dissolution equilibrium of Mg(OH)X2\ce{Mg(OH)2} to the right.

    Therefore, the molar solubility of Mg(OH)X2\ce{Mg(OH)2} is significantly higher in the buffer than in pure water.


Part (b): Quantitative Molar Solubility Calculation

  1. Determine the hydroxide ion concentration in the buffer: Using the Henderson-Hasselbalch relationship for a basic buffer: pOH=pKb+log⁡([NHX4X+][NHX3])\text{pOH} = \text{p}K_b + \log\left(\frac{[\ce{NH4+}]}{[\ce{NH3}]}\right)

    Given Kb=1.80×10−5K_b = 1.80 \times 10^{-5}: pKb=−log⁡10(1.80×10−5)≈4.745\text{p}K_b = -\log_{10}(1.80 \times 10^{-5}) \approx 4.745 pOH=4.745+log⁡10(0.1500.100)=4.745+0.176=4.921\text{pOH} = 4.745 + \log_{10}\left(\frac{0.150}{0.100}\right) = 4.745 + 0.176 = 4.921

    From the buffer equilibrium: [OHX−]≈1.22×10−5 M[\ce{OH-}] \approx 1.22 \times 10^{-5}\text{ M}

  2. Calculate the molar solubility (SS): The solubility product expression is: Ksp=[MgX2+][OHX−]2K_{\text{sp}} = [\ce{Mg^2+}][\ce{OH-}]^2

    Each mole of Mg(OH)X2\ce{Mg(OH)2} that dissolves yields 1 mol1\text{ mol} of MgX2+\ce{Mg^2+}, so the molar solubility is S=[MgX2+]S = [\ce{Mg^2+}]: S=Ksp[OHX−]2=5.61×10−12(1.217×10−5)2=5.61×10−121.48×10−10≈0.0379 MS = \frac{K_{\text{sp}}}{[\ce{OH-}]^2} = \frac{5.61 \times 10^{-12}}{(1.217 \times 10^{-5})^2} = \frac{5.61 \times 10^{-12}}{1.48 \times 10^{-10}} \approx 0.0379\text{ M}

The molar solubility in the buffer solution is 0.0379 M0.0379\text{ M}, which is more than 300300 times greater than in pure water.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student assumes the buffer capacity keeps [OH-] strictly constant at its initial value without accounting for the reaction consuming NH4+ and generating NH3 during dissolution.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Correct
  1. Step 1

    pOH=4.74+log⁡(0.1500.100)=4.92  ⟹  [OHX−]=1.20×10−5 M\text{pOH} = 4.74 + \log\left(\frac{0.150}{0.100}\right) = 4.92 \implies [\ce{OH-}] = 1.20 \times 10^{-5}\text{ M}

  2. Step 2

    Since [OHX−][\ce{OH-}] is lower than in pure water, Le Châtelier's principle shifts equilibrium right, increasing solubility.

  3. Step 3

    Ksp=[MgX2+][OHX−]2=5.61×10−12  ⟹  S=5.61×10−12(1.20×10−5)2K_{\text{sp}} = [\ce{Mg^2+}][\ce{OH-}]^2 = 5.61 \times 10^{-12} \implies S = \frac{5.61 \times 10^{-12}}{(1.20 \times 10^{-5})^2}

  4. Step 4

    S=0.0390 MS = 0.0390\text{ M}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the Henderson-Hasselbalch relationship to find the pOH\text{pOH} and [OHX−][\ce{OH-}] of the buffer.

You correctly applied Le Châtelier's principle to explain why removing hydroxide ions increases the solubility of magnesium hydroxide.

You related the molar solubility SS directly to [MgX2+][\ce{Mg^2+}] and correctly solved for SS using KspK_{\text{sp}}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
none
REASONING PATH
Your ACEpath teacher’s suggested approach
Buffer Hydroxide Concentration
  • For a basic buffer, [OHX−]=Kb×[base][conjugate acid][\ce{OH-}] = K_b \times \frac{[\text{base}]}{[\text{conjugate acid}]}.

  • Calculate [OHX−][\ce{OH-}] directly from the buffer ratio before evaluating the solubility product.

Coupled Equilibrium Shift
  • Removing a product ion from a dissolution equilibrium shifts the reaction toward dissolution according to Le Châtelier's principle.

  • Compare the controlled ion concentration in the buffer to that in pure water to predict the direction of shift.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Buffer [OHX−]=1.80×10−5×0.1000.150=1.20×10−5 M[\ce{OH-}] = 1.80 \times 10^{-5} \times \frac{0.100}{0.150} = 1.20 \times 10^{-5}\text{ M}.

  2. S=[MgX2+]=Ksp[OHX−]2=5.61×10−12(1.20×10−5)2≈0.0390 MS = [\ce{Mg^2+}] = \frac{K_{\text{sp}}}{[\ce{OH-}]^2} = \frac{5.61 \times 10^{-12}}{(1.20 \times 10^{-5})^2} \approx 0.0390\text{ M}.

Final answer

S=0.0390 MS = 0.0390\text{ M} (or 0.0379 M0.0379\text{ M} when using unrounded pOH=4.921\text{pOH} = 4.921)

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice problems where buffer capacity is challenged by a high concentration of dissolved ions.

  • Verify how pH-dependent solubility curves are constructed for amphoteric and basic metal hydroxides.

OverviewACEpath Teacher's Diagnosis

02 The student combines the two equilibrium equations without squaring the stoichiometry of the second reaction, calculating K = Ksp / Kb instead of Ksp / Kb².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    pOH=4.74+log⁡(0.150/0.100)=4.92  ⟹  [OH−]=1.20×10−5 M  ⟹  Buffer reduces [OH−], so Le Chaˆtelier predicts higher solubility\text{pOH} = 4.74 + \log(0.150/0.100) = 4.92 \implies [\text{OH}^-] = 1.20 \times 10^{-5}\text{ M} \implies \text{Buffer reduces }[\text{OH}^-]\text{, so Le Châtelier predicts higher solubility}

  2. Step 2

    K=KspKb=5.61×10−121.80×10−5=3.12×10−7K = \frac{K_{\text{sp}}}{K_b} = \frac{5.61 \times 10^{-12}}{1.80 \times 10^{-5}} = 3.12 \times 10^{-7}

    Correct

    K=KspKb2=5.61×10−12(1.80×10−5)2≈1.73×10−2K = \frac{K_{\text{sp}}}{K_b^2} = \frac{5.61 \times 10^{-12}}{(1.80 \times 10^{-5})^2} \approx 1.73 \times 10^{-2} (or directly S=Ksp[OH−]2S = \frac{K_{\text{sp}}}{[\text{OH}^-]^2})

    Because 1 mol1\text{ mol} of Mg(OH)2\text{Mg(OH)}_2 produces 2 mol2\text{ mol} of OH−\text{OH}^-, reaction (2) must be multiplied by 22 to cancel OH−\text{OH}^-. When multiplying a chemical equation by a stoichiometric coefficient n=2n=2, its equilibrium constant must be raised to the power of nn, yielding K=Ksp×(1Kb)2=KspKb2K = K_{\text{sp}} \times \left(\frac{1}{K_b}\right)^2 = \frac{K_{\text{sp}}}{K_b^2}.

  3. Step 3

    K=S(0.100+2S)2(0.150−2S)2≈S(0.100)2(0.150)2=3.12×10−7  ⟹  S=3.12×10−7×(0.1500.100)2=7.02×10−7 MK = \frac{S(0.100+2S)^2}{(0.150-2S)^2} \approx \frac{S(0.100)^2}{(0.150)^2} = 3.12 \times 10^{-7} \implies S = 3.12 \times 10^{-7} \times \left(\frac{0.150}{0.100}\right)^2 = 7.02 \times 10^{-7}\text{ M}

    Correct

    S=Ksp[OH−]2=5.61×10−12(1.217×10−5)2≈0.0379 MS = \frac{K_{\text{sp}}}{[\text{OH}^-]^2} = \frac{5.61 \times 10^{-12}}{(1.217 \times 10^{-5})^2} \approx 0.0379\text{ M}

    Your algebraic setup and simplification for SS were logically sound, but the numerical answer was thrown off by the incorrect overall equilibrium constant KK from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the Henderson-Hasselbalch equation to find the buffer's pOH\text{pOH} and hydroxide concentration.

You correctly explained the qualitative shift using Le Châtelier's principle.

You correctly set up the mass-action quotient for the overall coupled reaction with squared concentrations.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Coupled Equilibrium Constant Power Rule

You squared the concentration terms [extNH3]2[ ext{NH}_3]^2 and [extNH4+]2[ ext{NH}_4^+]^2 in your equilibrium expression, but forgot to square 1/Kb1/K_b when computing the numerical value of KK.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking that multiplying an elementary equilibrium reaction by a stoichiometric factor nn requires raising its equilibrium constant to the nn-th power (K′=KnK' = K^n).

REASONING PATH
Your ACEpath teacher’s suggested approach
Stoichiometric Factor Rule for $K$
  • If Reaction 3 = Reaction 1 + n×n \times Reaction 2, then K3=K1×(K2)nK_3 = K_1 \times (K_2)^n.

  • Always balance the coupled reactions to identify the multiplier nn for each reaction before multiplying their equilibrium constants.

Alternative Direct Method via Fixed Buffer $[ ext{OH}^-]$
  • In an effective buffer, [extOH−][ ext{OH}^-] is held constant, so Ksp=[Mg2+][OH−]2K_{\text{sp}} = [\text{Mg}^{2+}][\text{OH}^-]^2 gives S=[Mg2+]=Ksp[OH−]2S = [\text{Mg}^{2+}] = \frac{K_{\text{sp}}}{[\text{OH}^-]^2}.

  • Since you already calculated [OH−][\text{OH}^-], substitute it directly into KspK_{\text{sp}} to avoid needing to combine reactions.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Multiply reaction (2) by 22: 2NH4+(aq)+2OH−(aq)⇌2NH3(aq)+2H2O(l)2\text{NH}_4^+(aq) + 2\text{OH}^-(aq) \rightleftharpoons 2\text{NH}_3(aq) + 2\text{H}_2\text{O}(l), which has K2′=(1Kb)2=1(1.80×10−5)2=3.086×109K_2' = \left(\frac{1}{K_b}\right)^2 = \frac{1}{(1.80 \times 10^{-5})^2} = 3.086 \times 10^9.

  2. Add to reaction (1): Koverall=Ksp×K2′=5.61×10−12(1.80×10−5)2=1.731×10−2K_{\text{overall}} = K_{\text{sp}} \times K_2' = \frac{5.61 \times 10^{-12}}{(1.80 \times 10^{-5})^2} = 1.731 \times 10^{-2}.

  3. Solve for solubility SS: S=Koverall×(0.1500.100)2=(1.731×10−2)×2.25≈0.0389 MS = K_{\text{overall}} \times \left(\frac{0.150}{0.100}\right)^2 = (1.731 \times 10^{-2}) \times 2.25 \approx 0.0389\text{ M} (or directly S=Ksp[OH−]2=5.61×10−12(1.217×10−5)2=0.0379 MS = \frac{K_{\text{sp}}}{[\text{OH}^-]^2} = \frac{5.61 \times 10^{-12}}{(1.217 \times 10^{-5})^2} = 0.0379\text{ M}).

  4. Final answer: S=0.0379 MS = 0.0379\text{ M}.

Final answer

S=0.0379 MS = 0.0379\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the rules for combining equilibrium constants (adding reactions corresponds to multiplying KK, multiplying coefficients corresponds to exponentiating KK).

  • Practice solving solubility in buffer solutions directly using the fixed [extH+][ ext{H}^+] or [extOH−][ ext{OH}^-] from the buffer.

  • Compare the overall reaction method and the direct fixed-ion method on a new coupled equilibrium problem to verify that both yield identical results.

OverviewACEpath Teacher's Diagnosis

03 The student neglects the exponent of 2 on hydroxide in the solubility product expression, writing Ksp = [Mg2+][OH-].

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    pOH=4.74+log⁡(0.150/0.100)=4.92  ⟹  [OH−]=1.20×10−5 M\text{pOH} = 4.74 + \log(0.150/0.100) = 4.92 \implies [\text{OH}^-] = 1.20 \times 10^{-5}\text{ M}

  2. Step 2

    Lower [OH−][\text{OH}^-] shifts the dissolution to the right by Le Châtelier's principle, so solubility is higher.

  3. Step 3

    [OH\text{OH}^-] = 1.20 ×\times 10^{-5} M\text{ M}   ⟹  \implies K_{sp\text{sp}} = [Mg\text{Mg}^{2+}][OH\text{OH}^-]   ⟹  \implies S = 5.61×10−121.20×10−5\frac{5.61 \times 10^{-12}}{1.20 \times 10^{-5}}   ⟹  \implies S = 4.68 ×\times 10^{-7} M\text{ M}_

    Correct

    K_{sp\text{sp}} = [Mg\text{Mg}^{2+}][OH\text{OH}^-]^2   ⟹  \implies S = Ksp[OH−]2\frac{K_{\text{sp}}}{[\text{OH}^-]^2} = 5.61×10−12(1.22×10−5)2\frac{5.61 \times 10^{-12}}{(1.22 \times 10^{-5})^2} ≈\approx 0.0379 M\text{ M}_

    Because dissolution produces two moles of hydroxide per mole of magnesium ions (Mg(OH)2⇌Mg2++2OH−\text{Mg(OH)}_2 \rightleftharpoons \text{Mg}^{2+} + 2\text{OH}^-), the equilibrium constant expression requires squaring the hydroxide concentration: Ksp=[Mg2+][OH−]2K_{\text{sp}} = [\text{Mg}^{2+}][\text{OH}^-]^2. Omitting the exponent underestimated the molar solubility by several orders of magnitude.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the Henderson-Hasselbalch equation to find the buffer's pOH\text{pOH} and hydroxide concentration.

You correctly deduced that neutralizing hydroxide drives the dissolution forward according to Le Châtelier's principle.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Stoichiometric Exponent in Equilibrium Expression

You set up the KspK_{\text{sp}} expression as a 1:1 product [Mg2+][OH−][\text{Mg}^{2+}][\text{OH}^-] instead of squaring the hydroxide concentration.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Forgetting that coefficients in the balanced chemical equation must appear as exponents in the equilibrium constant expression, even when the ion concentration is held constant by an external buffer.

REASONING PATH
Your ACEpath teacher’s suggested approach
Law of Mass Action Exponents
  • For a dissolution equilibrium MaXb(s)⇌aMn+(aq)+bXm−(aq)\text{M}_a\text{X}_b(s) \rightleftharpoons a\text{M}^{n+}(aq) + b\text{X}^{m-}(aq), the solubility product expression is Ksp=[Mn+]a[Xm−]bK_{\text{sp}} = [\text{M}^{n+}]^a [\text{X}^{m-}]^b.

  • Always write down the balanced dissociation equation first and ensure each stoichiometric coefficient becomes the power of its corresponding ion concentration.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the solubility product expression based on stoichiometry: Ksp=[Mg2+][OH−]2K_{\text{sp}} = [\text{Mg}^{2+}][\text{OH}^-]^2.

  2. Substitute the buffered [OH−]≈1.22×10−5 M[\text{OH}^-] \approx 1.22 \times 10^{-5}\text{ M} and Ksp=5.61×10−12K_{\text{sp}} = 5.61 \times 10^{-12}: S=[Mg2+]=5.61×10−12(1.217×10−5)2S = [\text{Mg}^{2+}] = \frac{5.61 \times 10^{-12}}{(1.217 \times 10^{-5})^2}.

  3. Evaluate the quotient: S=5.61×10−121.482×10−10≈0.0379 MS = \frac{5.61 \times 10^{-12}}{1.482 \times 10^{-10}} \approx 0.0379\text{ M}.

Final answer

S=0.0379 MS = 0.0379\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that every chemical coefficient in a balanced dissociation reaction is applied as an exponent in KspK_{\text{sp}}.

  • Perform a sanity check comparing your calculated quantitative solubility to your qualitative prediction; notice that 4.68×10−7 M4.68 \times 10^{-7}\text{ M} is smaller than the solubility in pure water (1.12×10−4 M1.12 \times 10^{-4}\text{ M}), contradicting your part (a) conclusion.

Lock it in

Similar question

01

Calculate the molar solubility of Zn(OH)X2\ce{Zn(OH)2} (Ksp=3.00×10−17K_{\text{sp}} = 3.00 \times 10^{-17}) in a buffer solution maintained at pH=8.00\text{pH} = 8.00.

Answer

At pH=8.00\text{pH} = 8.00, pOH=6.00\text{pOH} = 6.00, so [OHX−]=1.00×10−6 M[\ce{OH-}] = 1.00 \times 10^{-6}\text{ M}. Since Ksp=[ZnX2+][OHX−]2K_{\text{sp}} = [\ce{Zn^2+}][\ce{OH-}]^2, the molar solubility is S=[ZnX2+]=3.00×10−17(1.00×10−6)2=3.00×10−5 MS = [\ce{Zn^2+}] = \frac{3.00 \times 10^{-17}}{(1.00 \times 10^{-6})^2} = 3.00 \times 10^{-5}\text{ M}.

02

Solid Fe(OH)X3\ce{Fe(OH)3} (Ksp=2.79×10−39K_{\text{sp}} = 2.79 \times 10^{-39}) is suspended in an acetic acid/acetate buffer containing 0.200 M CHX3COOH0.200\text{ M } \ce{CH3COOH} and 0.200 M CHX3COONa0.200\text{ M } \ce{CH3COONa} (Ka=1.75×10−5K_a = 1.75 \times 10^{-5}). Find the molar solubility of Fe(OH)X3\ce{Fe(OH)3} in this buffer at 25 ∘C25\text{ }^\circ\text{C}.

Answer

In this buffer, [HX+]=Ka[CHX3COOH][CHX3COOX−]=1.75×10−5 M[\ce{H+}] = K_a \frac{[\ce{CH3COOH}]}{[\ce{CH3COO-}]} = 1.75 \times 10^{-5}\text{ M}. Thus [OHX−]=1.00×10−141.75×10−5=5.71×10−10 M[\ce{OH-}] = \frac{1.00 \times 10^{-14}}{1.75 \times 10^{-5}} = 5.71 \times 10^{-10}\text{ M}. Molar solubility S=[FeX3+]=Ksp[OHX−]3=2.79×10−39(5.71×10−10)3≈1.50×10−11 MS = [\ce{Fe^3+}] = \frac{K_{\text{sp}}}{[\ce{OH-}]^3} = \frac{2.79 \times 10^{-39}}{(5.71 \times 10^{-10})^3} \approx 1.50 \times 10^{-11}\text{ M}.

03

A solution contains 0.250 M NHX4Cl0.250\text{ M } \ce{NH4Cl} and 0.200 M NHX30.200\text{ M } \ce{NH3} (Kb=1.80×10−5K_b = 1.80 \times 10^{-5}). Determine if a precipitate of Mn(OH)X2\ce{Mn(OH)2} (Ksp=1.60×10−13K_{\text{sp}} = 1.60 \times 10^{-13}) will form when Mn(NOX3)X2\ce{Mn(NO3)2} is added to give [MnX2+]=0.050 M[\ce{Mn^2+}] = 0.050\text{ M}.

Answer

First find [OHX−]=Kb[NHX3][NHX4X+]=1.80×10−5×0.2000.250=1.44×10−5 M[\ce{OH-}] = K_b \frac{[\ce{NH3}]}{[\ce{NH4+}]} = 1.80 \times 10^{-5} \times \frac{0.200}{0.250} = 1.44 \times 10^{-5}\text{ M}. Then calculate the reaction quotient: Q=[MnX2+][OHX−]2=(0.050)(1.44×10−5)2=1.04×10−11Q = [\ce{Mn^2+}][\ce{OH-}]^2 = (0.050)(1.44 \times 10^{-5})^2 = 1.04 \times 10^{-11}. Because Q=1.04×10−11>Ksp=1.60×10−13Q = 1.04 \times 10^{-11} > K_{\text{sp}} = 1.60 \times 10^{-13}, a precipitate of Mn(OH)X2\ce{Mn(OH)2} will form.

Loading workspace…