Resources

Calculate the molar solubility of silver chloride, AgCl\text{AgCl} (Ksp=1.77×10−10K_{\text{sp}} = 1.77 \times 10^{-10}), in a 0.0500 M0.0500\text{ M} aqueous solution of calcium chloride, CaCl2\text{CaCl}_2, at 25∘C25^\circ\text{C}.

Answer and steps

Final answer

1.77×10−9 M1.77 \times 10^{-9}\text{ M}

Steps

01

Determine the initial concentration of the common ion

Calcium chloride, CaClX2\ce{CaCl2}, is a strong electrolyte that dissociates completely in water:

CaClX2(aq)→CaX2+(aq)+2 ClX−(aq)\ce{CaCl2(aq) -> Ca^{2+}(aq) + 2 Cl^-(aq)}

Because each formula unit of CaClX2\ce{CaCl2} yields two chloride ions, calculate the concentration of ClX−\ce{Cl-} provided by the solution:

[ClX−]initial=2×[CaClX2]=2×0.0500 M=0.100 M[\ce{Cl-}]_{\text{initial}} = 2 \times [\ce{CaCl2}] = 2 \times 0.0500\text{ M} = 0.100\text{ M}

Common Pitfall: Forgetting the stoichiometric factor of 22 for the chloride ion in CaClX2\ce{CaCl2} is a frequent error. Always write out the dissociation equation first.


02

Set up the equilibrium table for the dissolution of AgCl\ce{AgCl}

Silver chloride dissolves according to the equilibrium:

AgCl(s)⇌AgX+(aq)+ClX−(aq)\ce{AgCl(s) <=> Ag+(aq) + Cl^-(aq)}

Let ss represent the molar solubility of AgCl\ce{AgCl} in this solution (in mol/L\text{mol/L} or M\text{M}):

SpeciesAgX+(aq)\ce{Ag+(aq)}ClX−(aq)\ce{Cl-(aq)}
Initial concentration000.100 M0.100\text{ M}
Change+s+s+s+s
Equilibrium concentrationss0.100+s0.100 + s

03

Use the solubility product expression (KspK_{\text{sp}})

The solubility product constant expression is:

Ksp=[AgX+][ClX−]K_{\text{sp}} = [\ce{Ag+}][\ce{Cl-}]

Substitute the equilibrium concentrations into the expression:

1.77×10−10=(s)(0.100+s)1.77 \times 10^{-10} = (s)(0.100 + s)


04

Apply the small-ss approximation and solve

Because KspK_{\text{sp}} is extremely small, the amount of additional ClX−\ce{Cl-} from dissolving AgCl\ce{AgCl} is negligible compared to the 0.100 M0.100\text{ M} already present from CaClX2\ce{CaCl2}:

0.100+s≈0.1000.100 + s \approx 0.100

Substitute this approximation back into the equation:

1.77×10−10≈s(0.100)1.77 \times 10^{-10} \approx s(0.100)

s=1.77×10−100.100=1.77×10−9 Ms = \frac{1.77 \times 10^{-10}}{0.100} = 1.77 \times 10^{-9}\text{ M}

Checking the approximation: 1.77×10−9 M≪0.100 M1.77 \times 10^{-9}\text{ M} \ll 0.100\text{ M}, so the approximation is valid.

The molar solubility of AgCl\ce{AgCl} in 0.0500 M CaClX20.0500\text{ M}\ \ce{CaCl2} is 1.77×10−9 M1.77 \times 10^{-9}\text{ M}. By Le Chatelier's principle, the presence of the common ion ClX−\ce{Cl-} shifts the solubility equilibrium to the left, drastically suppressing the solubility compared to its value in pure water (≈1.33×10−5 M\approx 1.33 \times 10^{-5}\text{ M}).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the 1:2 stoichiometry of CaCl2 and assumes the chloride concentration equals the concentration of CaCl2 (0.0500 M).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    [ClX−]=0.0500 M[\ce{Cl-}] = 0.0500\text{ M}

    Correct

    [ClX−]=2×[CaClX2]=2×0.0500 M=0.100 M[\ce{Cl-}] = 2 \times [\ce{CaCl2}] = 2 \times 0.0500\text{ M} = 0.100\text{ M}

    Calcium chloride dissociates completely according to CaClX2(aq)→CaX2+(aq)+2 ClX−(aq)\ce{CaCl2(aq) -> Ca^{2+}(aq) + 2 Cl^-(aq)}. Each mole of CaClX2\ce{CaCl2} produces 2 moles2\text{ moles} of chloride ions, so the concentration of ClX−\ce{Cl-} is 2×0.0500 M=0.100 M2 \times 0.0500\text{ M} = 0.100\text{ M}.

  2. Step 2

    Ksp=[AgX+][ClX−]  ⟹  1.77×10−10=0.0500s  ⟹  s=3.54×10−9 MK_{\text{sp}} = [\ce{Ag+}][\ce{Cl-}] \implies 1.77 \times 10^{-10} = 0.0500s \implies s = 3.54 \times 10^{-9}\text{ M}

    Correct

    Ksp=[AgX+][ClX−]  ⟹  1.77×10−10=0.100s  ⟹  s=1.77×10−9 MK_{\text{sp}} = [\ce{Ag+}][\ce{Cl-}] \implies 1.77 \times 10^{-10} = 0.100s \implies s = 1.77 \times 10^{-9}\text{ M}

    Your algebra and use of the small-ss approximation were mathematically sound, but substituting the incorrect [ClX−][\ce{Cl-}] caused your final solubility to be double the true value.

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that ClX−\ce{Cl-} acts as a common ion that suppresses the solubility of AgCl\ce{AgCl}.

You set up the correct equilibrium expression Ksp=[AgX+][ClX−]K_{\text{sp}} = [\ce{Ag+}][\ce{Cl-}].

You correctly used the approximation [ClX−]eq≈[ClX−]initial[\ce{Cl-}]_{\text{eq}} \approx [\ce{Cl-}]_{\text{initial}} because KspK_{\text{sp}} is very small.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometry of strong electrolyte dissociation

You equated the concentration of the chloride ion directly to the nominal concentration of the salt CaClX2\ce{CaCl2}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked the subscript in the chemical formula CaClX2\ce{CaCl2}, forgetting that complete ionic dissociation yields two chloride ions per formula unit.

REASONING PATH
Your ACEpath teacher’s suggested approach
Write Complete Dissociation
  • For a strong electrolyte AXx BXy\ce{A_x B_y}, the concentration of ion B\ce{B} is [B]=y×[AXx BXy][\ce{B}] = y \times [\ce{A_x B_y}].

  • Always write the balanced dissociation equation for the soluble salt before entering concentrations into an equilibrium table.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine the initial chloride concentration: [ClX−]=2×0.0500 M=0.100 M[\ce{Cl-}] = 2 \times 0.0500\text{ M} = 0.100\text{ M}.

  2. Set up the equilibrium expression: Ksp=[AgX+][ClX−]=(s)(0.100+s)≈0.100sK_{\text{sp}} = [\ce{Ag+}][\ce{Cl-}] = (s)(0.100 + s) \approx 0.100s.

  3. Solve for the molar solubility: s=1.77×10−100.100=1.77×10−9 Ms = \frac{1.77 \times 10^{-10}}{0.100} = 1.77 \times 10^{-9}\text{ M}.

Final answer

1.77×10−9 M1.77 \times 10^{-9}\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before setting up an equilibrium table, write out the complete dissociation equation of any soluble strong electrolyte present.

  • Multiply the salt concentration by the ion's stoichiometric subscript to find the true initial ion concentration.

OverviewACEpath Teacher's Diagnosis

02 The student squares the chloride concentration in the Ksp expression for AgCl, mistakenly applying the coefficient 2 from the CaCl2 dissociation stoichiometry to the AgCl equilibrium expression.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    [ClX−]=2×0.0500 M=0.100 M[\ce{Cl^-}] = 2 \times 0.0500\text{ M} = 0.100\text{ M}

  2. Step 2

    Ksp=[AgX+][ClX−]2=s(0.100)2K_{\text{sp}} = [\ce{Ag^+}][\ce{Cl^-}]^2 = s(0.100)^2

    Correct

    Ksp=[AgX+][ClX−]=s(0.100)K_{\text{sp}} = [\ce{Ag^+}][\ce{Cl^-}] = s(0.100)

    The dissolution equilibrium is AgCl(s)⇌AgX+(aq)+ClX−(aq)\ce{AgCl(s) <=> Ag^+(aq) + Cl^-(aq)}, where the stoichiometric coefficient of ClX−\ce{Cl^-} is 11. Therefore, the exponent on [ClX−][\ce{Cl^-}] in the KspK_{\text{sp}} expression must be 11, not 22.

  3. Step 3

    1.77×10−10=0.0100s  ⟹  s=1.77×10−8 M1.77 \times 10^{-10} = 0.0100s \implies s = 1.77 \times 10^{-8}\text{ M}

    Correct

    1.77×10−10=0.100s  ⟹  s=1.77×10−9 M1.77 \times 10^{-10} = 0.100s \implies s = 1.77 \times 10^{-9}\text{ M}

    Your algebra was executed accurately based on the squared expression, but the value is ten times too high due to the exponent error in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that CaClX2\ce{CaCl2} provides two moles of ClX−\ce{Cl^-} per mole of salt and correctly found [ClX−]=0.100 M[\ce{Cl^-}] = 0.100\text{ M}.

You appropriately applied the common-ion approximation where the contribution of ClX−\ce{Cl^-} from dissolving AgCl\ce{AgCl} is negligible compared to the common ion present.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misapplied Stoichiometric Exponent in Equilibrium Expression

You accidentally carried the stoichiometric coefficient 22 from CaClX2\ce{CaCl2} over into the KspK_{\text{sp}} expression for AgCl\ce{AgCl}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the stoichiometry of the soluble salt providing the common ion (CaClX2\ce{CaCl2}) with the stoichiometry of the sparingly soluble salt at equilibrium (AgCl\ce{AgCl}). The exponents in a KspK_{\text{sp}} expression depend strictly on the coefficients in the dissolution equation of the sparingly soluble salt itself.

REASONING PATH
Your ACEpath teacher’s suggested approach
Separate Source Stoichiometry from Equilibrium Exponents
  • For a sparingly soluble salt MXaXXb(s)⇌a MXz+(aq)+b XXy−(aq)\ce{M_aX_b(s) <=> a M^{z+}(aq) + b X^{y-}(aq)}, the solubility product expression is strictly Ksp=[MXz+]a[XXy−]bK_{\text{sp}} = [\ce{M^{z+}}]^a [\ce{X^{y-}}]^b.

  • Always write out the chemical dissolution equation for the sparingly soluble solid first, and determine exponents exclusively from that equation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the solubility equilibrium for the sparingly soluble salt: AgCl(s)⇌AgX+(aq)+ClX−(aq)\ce{AgCl(s) <=> Ag^+(aq) + Cl^-(aq)}.

  2. Formulate the correct solubility product expression: Ksp=[AgX+][ClX−]K_{\text{sp}} = [\ce{Ag^+}][\ce{Cl^-}].

  3. Substitute [AgX+]=s[\ce{Ag^+}] = s and the total chloride concentration [ClX−]≈0.100 M[\ce{Cl^-}] \approx 0.100\text{ M}: 1.77×10−10=s(0.100)1.77 \times 10^{-10} = s(0.100).

  4. Solve for ss: s=1.77×10−100.100=1.77×10−9 Ms = \frac{1.77 \times 10^{-10}}{0.100} = 1.77 \times 10^{-9}\text{ M}.

Final answer

1.77×10−9 M1.77 \times 10^{-9}\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before setting up numerical equations, always write out the balanced dissolution reaction for the slightly soluble salt.

  • Check each concentration bracket in the KspK_{\text{sp}} expression against the stoichiometric coefficients of that specific dissolution reaction.

  • Practice problems where a polyatomic or polyvalent common-ion source (such as NaX2SOX4\ce{Na2SO4} or Mg(OH)X2\ce{Mg(OH)2}) is paired with a 1:11:1 sparingly soluble salt to reinforce isolating common-ion concentrations from equilibrium powers.

OverviewACEpath Teacher's Diagnosis

03 The student neglects the common ion effect entirely and calculates the molar solubility of AgCl in pure water as the square root of Ksp.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    AgCl(s)⇌AgX+(aq)+ClX−(aq)\ce{AgCl(s) <=> Ag+(aq) + Cl^-(aq)}

  2. Step 2

    Ksp=[AgX+][ClX−]=s2K_{\text{sp}} = [\ce{Ag+}][\ce{Cl-}] = s^2

    Correct

    Ksp=[AgX+][ClX−]=(s)(0.100+s)K_{\text{sp}} = [\ce{Ag+}][\ce{Cl-}] = (s)(0.100 + s)

    You assumed [AgX+]=[ClX−]=s[\ce{Ag+}] = [\ce{Cl-}] = s, which only applies in pure water. Because CaClX2\ce{CaCl2} is a strong electrolyte, 0.0500 M CaClX20.0500\text{ M}\ \ce{CaCl2} completely dissociates into 2×0.0500 M=0.100 M ClX−2 \times 0.0500\text{ M} = 0.100\text{ M}\ \ce{Cl-}, so the equilibrium chloride concentration is [ClX−]=0.100+s[\ce{Cl-}] = 0.100 + s.

  3. Step 3

    s=1.77×10−10  ⟹  s=1.33×10−5 Ms = \sqrt{1.77 \times 10^{-10}} \implies s = 1.33 \times 10^{-5}\text{ M}

    Correct

    s=1.77×10−100.100=1.77×10−9 Ms = \frac{1.77 \times 10^{-10}}{0.100} = 1.77 \times 10^{-9}\text{ M}

    Your calculation correctly solved the equation you wrote, but it used the pure-water formula instead of accounting for the common ion effect.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly wrote the chemical equilibrium equation for the dissolution of silver chloride.

You correctly identified the general solubility product expression Ksp=[AgX+][ClX−]K_{\text{sp}} = [\ce{Ag+}][\ce{Cl-}].

You accurately calculated the square root of 1.77×10−101.77 \times 10^{-10} with appropriate units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of common ion effect

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You calculated the molar solubility of AgCl\ce{AgCl} in pure water rather than in a solution containing a strong electrolyte with a common ion (ClX−\ce{Cl-} from CaClX2\ce{CaCl2}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Soluble Salts and Common Ions
  • A strong electrolyte in solution provides an initial non-zero concentration of any ion it shares with the slightly soluble salt.

  • Check whether the solvent is pure water or an aqueous solution containing an ion of the salt; write out the full dissociation of the soluble salt and determine its ion concentrations.

Account for Stoichiometric Ratios
  • Each formula unit of CaClX2\ce{CaCl2} produces two chloride ions: [ClX−]initial=2×[CaClX2][\ce{Cl-}]_{\text{initial}} = 2 \times [\ce{CaCl2}].

  • Multiply the molarity of the strong electrolyte by the subscript of the common ion before entering it into your initial concentration row.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine initial [ClX−][\ce{Cl-}] from the complete dissociation of CaClX2\ce{CaCl2}: [ClX−]=2×0.0500 M=0.100 M[\ce{Cl-}] = 2 \times 0.0500\text{ M} = 0.100\text{ M}.

  2. Express equilibrium concentrations: [AgX+]=s[\ce{Ag+}] = s and [ClX−]=0.100+s[\ce{Cl-}] = 0.100 + s.

  3. Substitute into the KspK_{\text{sp}} expression: 1.77×10−10=s(0.100+s)1.77 \times 10^{-10} = s(0.100 + s).

  4. Apply the approximation 0.100+s≈0.1000.100 + s \approx 0.100, giving 1.77×10−10≈0.100s1.77 \times 10^{-10} \approx 0.100s.

  5. Solve for ss: s=1.77×10−100.100=1.77×10−9 Ms = \frac{1.77 \times 10^{-10}}{0.100} = 1.77 \times 10^{-9}\text{ M}.

Final answer

1.77×10−9 M1.77 \times 10^{-9}\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always check the solvent first: if it contains an electrolyte, determine if any common ion is present.

  • Write out the complete dissociation of the soluble salt, paying special attention to ion subscripts (such as the 22 in CaClX2\ce{CaCl2}).

  • Construct an ICE table where the common ion starts with its dissolved concentration rather than zero.

Lock it in

Similar question

01

Calculate the molar solubility of silver chloride, AgCl\ce{AgCl} (Ksp=1.77×10−10K_{\text{sp}} = 1.77 \times 10^{-10}), in a 0.0200 M0.0200\text{ M} aqueous solution of magnesium chloride, MgClX2\ce{MgCl2}.

Answer

4.43×10−9 M4.43 \times 10^{-9}\text{ M}. Key steps: MgClX2→MgX2++2 ClX−\ce{MgCl2 -> Mg^{2+} + 2 Cl^-}, so [ClX−]=2×0.0200 M=0.0400 M[\ce{Cl-}] = 2 \times 0.0200\text{ M} = 0.0400\text{ M}. Then s=Ksp[ClX−]=1.77×10−100.0400 M=4.43×10−9 Ms = \frac{K_{\text{sp}}}{[\ce{Cl-}]} = \frac{1.77 \times 10^{-10}}{0.0400\text{ M}} = 4.43 \times 10^{-9}\text{ M}.

02

Calculate the molar solubility of lead(II) iodide, PbIX2\ce{PbI2} (Ksp=7.1×10−9K_{\text{sp}} = 7.1 \times 10^{-9}), in a 0.10 M0.10\text{ M} aqueous solution of potassium iodide, KI\ce{KI}.

Answer

7.1×10−7 M7.1 \times 10^{-7}\text{ M}. Key steps: KI→KX++IX−\ce{KI -> K+ + I^-}, so initial [IX−]=0.10 M[\ce{I-}] = 0.10\text{ M}. Dissolution equilibrium is PbIX2(s)⇌PbX2++2 IX−\ce{PbI2(s) <=> Pb^{2+} + 2 I^-}, giving Ksp=[PbX2+Scroll][IX−]2=s(0.10+2s)2≈s(0.10)2K_{\text{sp}} = [\ce{Pb^{2+}Scroll}][\ce{I-}]^2 = s(0.10 + 2s)^2 \approx s(0.10)^2. Thus, s=7.1×10−90.010=7.1×10−7 Ms = \frac{7.1 \times 10^{-9}}{0.010} = 7.1 \times 10^{-7}\text{ M}.

03

Calculate the molar solubility of calcium fluoride, CaFX2\ce{CaF2} (Ksp=3.45×10−11K_{\text{sp}} = 3.45 \times 10^{-11}), in a 0.050 M0.050\text{ M} solution of calcium nitrate, Ca(NOX3)X2\ce{Ca(NO3)2}.

Answer

1.31×10−5 M1.31 \times 10^{-5}\text{ M}. Key steps: Ca(NOX3)X2→CaX2++2 NOX3X−\ce{Ca(NO3)2 -> Ca^{2+} + 2 NO3^-}, so initial [CaX2+]=0.050 M[\ce{Ca^{2+}}] = 0.050\text{ M}. Dissolution equilibrium is CaFX2(s)⇌CaX2++2 FX−\ce{CaF2(s) <=> Ca^{2+} + 2 F^-}, so K_{\text{sp}} = [\ce{Ca^{2+}][\ce{F-}]^2 = (0.050)(2s)^2 = 0.050 \times 4s^2 = 0.20s^2. Then s=3.45×10−110.20≈1.31×10−5 Ms = \sqrt{\frac{3.45 \times 10^{-11}}{0.20}} \approx 1.31 \times 10^{-5}\text{ M}.

Loading workspace…