Resources
An industrial gas sensor measures volatile organic compounds (VOCs) at trace particulate concentrations. A contaminated air sample contains benzene vapor (, ) at a concentration of (parts per million by volume) at an ambient temperature of and an ambient pressure of . Using the particle model and unit conversions: (a) Convert the concentration of benzene into milligrams per cubic meter (). (b) Calculate the partial pressure of benzene in pascals (). (c) Determine the total number of benzene molecules present in a breath sample, using and Avogadro's number .
Answer and steps
Final answer
(a) Concentration ; (b) ; (c) Number of molecules
Steps
Part (a): Converting Concentration to
- Understand parts per million by volume (): A concentration of means that in every parts of air by volume, there are parts of benzene vapor. In the ideal gas model, volume fraction equals mole fraction ():
-
Standard conversion relation for gases: The concentration in milligrams per cubic meter () relates to via the molar volume () of an ideal gas: where:
- is the molar mass of benzene.
- Using the standard reference molar volume for ambient trace-gas reporting ( at standard ambient conditions):
(Note: Applying the exact ambient conditions and gives , which yields . Industrial hygiene protocols commonly report the reference conversion of .)
Part (b): Calculating Partial Pressure ()
According to Dalton's Law of partial pressures, the partial pressure of a component in an ideal gas mixture is the product of its mole fraction and the total pressure:
Given:
Calculate:
Part (c): Total Number of Benzene Molecules in of Air
- Convert volume to :
-
Apply the Ideal Gas Law to benzene:
Substitute the values:
- Convert moles to molecules using Avogadro's number ():
Typical errors
01 The student confuses parts per million (10⁻⁶) with parts per billion (10⁻⁹), underestimating the concentration, partial pressure, and molecule count by three orders of magnitude.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Parts per million () represents a fraction of (one part in one million), not (which is parts per billion, ).
- Step 3Correct
(or using standard reference )
Your dimensional conversion method from mole fraction to mass per cubic meter was completely sound, but the result inherited the factor from Step 2.
- Step 4Correct
You correctly applied Dalton's law of partial pressures, but the value is off by a factor of due to the earlier mole fraction error.
- Step 5Correct
Your application of the ideal gas law and Avogadro's constant was mathematically and conceptually correct, but the final count is times too low due to the propagated error.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the ideal gas law to determine the molar density of air.
You applied Dalton's law of partial pressures accurately using the mole fraction.
You converted gas volume to moles and correctly multiplied by Avogadro's constant to count the particles.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeConfusing parts per million () with parts per billion ().
WHY IT HAPPENED
ACEpath Teacher's DiagnosisThe prefix 'million' was associated with a scale factor of instead of . In gas mixtures, , whereas .
REASONING PATH
Your ACEpath teacher’s suggested approach- Parts-per Notation Check
(million) and (billion).
Always verify the exponent: , whereas .
CORRECTED PATH
ACEpath Teacher's DemonstrationExpress the mole fraction using parts per million: .
Calculate the mass of benzene per cubic meter: (or using reference ambient ).
Calculate the partial pressure: .
Calculate the molecules in : .
(a) (or ); (b) ; (c)
02 The student uses the standard molar volume at STP (22.4 L/mol) instead of calculating the molar volume at the given temperature of 293.15 K.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
(or standard ambient reference )
You assumed a molar volume of , which only applies at standard temperature and pressure ( and ). Because the air sample is at (), one mole of gas occupies a larger volume (), yielding approximately to .
- Step 2
- Step 3
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly set up the mole fraction from parts per million by volume ().
You correctly applied Dalton's Law to calculate the partial pressure of benzene.
You accurately used the ideal gas law with proper SI units to determine the number of moles and converted moles to molecules using Avogadro's constant.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted for molar volume without adjusting for the non-STP temperature of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou relied on a memorized constant ( at ) as a universal molar volume rather than recalculating for the specific temperature and pressure given in the problem.
REASONING PATH
Your ACEpath teacher’s suggested approach- Verify Ambient Conditions Before Using Molar Volume
The value is valid only at STP ( and ). At other temperatures or pressures, calculate .
Check whether the problem specifies (). If the temperature differs, calculate the actual molar volume using before converting between gas volume and moles.
CORRECTED PATH
ACEpath Teacher's DemonstrationCompute the actual molar volume of air at and : . (Using standard industrial hygiene reference conditions at , ).
Find moles of air per cubic meter (): .
Calculate mass of benzene per cubic meter: .
(a) ; (b) ; (c) (or )
03 The student forgets to convert the sample volume from liters to cubic meters in the ideal gas equation, leading to a calculated molecule count that is 1000 times too large.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You substituted the volume directly as without converting liters to cubic meters. Because pressure is in pascals () and is in , volume must be in cubic meters ().
- Step 4Correct
You correctly multiplied by Avogadro's constant, but your final answer is times too large due to the volume unit error in the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the ambient conditions and molar mass to calculate the concentration in milligrams per cubic meter.
You applied Dalton's law of partial pressures accurately to find the partial pressure of benzene.
You correctly identified and applied Avogadro's constant to convert moles into total molecule count.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted directly into instead of converting it to .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating common laboratory volume units (liters) with coherent base SI volume units (cubic meters) when using . Since and , the pressure-volume product only yields joules when volume is expressed in .
REASONING PATH
Your ACEpath teacher’s suggested approach- Match Volume Units to the Gas Constant
When using with pressure in , volume must always be in cubic meters ().
Always convert liters to cubic meters by multiplying by before evaluating .
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert the sample volume to cubic meters: .
Calculate moles of benzene: .
Multiply by Avogadro's number: .
Lock it in
What numerical multiplier does the unit (parts per million) correspond to in fraction calculations?
(or ). One part per million equals 1 part per .
Similar question
A gas detector measures carbon monoxide (, ) at a level of in a room where total pressure is and temperature is . Calculate the partial pressure of in pascals ().
Answer
.
Formaldehyde vapor (, ) is detected in indoor air at (parts per billion). What is its concentration in micrograms per cubic meter () at a molar volume of ?
Answer
. In , . . Mass .
A closed chamber holds of air at and . The concentration of sulfur dioxide () is . Using and , determine the total number of molecules in the chamber.
Answer
Total moles of gas . Moles of . Number of molecules .