Resources

An air-tight cylinder fitted with a frictionless, movable piston contains 0.500 mol0.500\text{ mol} of an ideal diatomic gas at 300 K300\text{ K} and an internal pressure equal to the constant external atmospheric pressure of 1.00 atm1.00\text{ atm}. The gas is heated slowly from 300 K300\text{ K} to 450 K450\text{ K} at constant pressure, causing the gas to expand. Applying thermodynamic sign conventions where expansion work done by the system on the surroundings is defined as w=−PextΔVw = -P_{\text{ext}}\Delta V, calculate the work ww done on the gas in Joules (J\text{J}). Use R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}).

Answer and steps

Final answer

−624 J-624\text{ J}

Steps

01

Relate Pressure-Volume Work to the Ideal Gas Law

To calculate the work done during an isobaric (constant-pressure) expansion of an ideal gas, we relate the change in volume to the change in temperature using the ideal gas equation.

The work done on a gas during an expansion against a constant external pressure PextP_{\text{ext}} is given by: w=−PextΔVw = -P_{\text{ext}}\Delta V

Since the piston is frictionless and movable, the expansion is carried out slowly (quasi-statically) such that the internal pressure of the gas remains equal to the constant external pressure throughout the process: P=PextP = P_{\text{ext}}

According to the ideal gas law, PV=nRTPV = nRT. For a fixed amount of gas nn undergoing an isobaric change from T1T_1 to T2T_2: PΔV=nRΔTP\Delta V = nR\Delta T

Substituting PextΔV=nRΔTP_{\text{ext}}\Delta V = nR\Delta T into the work formula gives: w=−nRΔTw = -nR\Delta T

02

Identify Given Values

  • Amount of gas, n=0.500 moln = 0.500\text{ mol}
  • Universal gas constant, R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K})
  • Initial temperature, T1=300 KT_1 = 300\text{ K}
  • Final temperature, T2=450 KT_2 = 450\text{ K}

The temperature change is: ΔT=T2−T1=450 K−300 K=150 K\Delta T = T_2 - T_1 = 450\text{ K} - 300\text{ K} = 150\text{ K}

03

Calculate the Work Done

Substitute the values into the derived equation: w=−(0.500 mol)⋅(8.314 J/(mol⋅K))⋅(150 K)w = -(0.500\text{ mol}) \cdot \left(8.314\text{ J}/(\text{mol}\cdot\text{K})\right) \cdot (150\text{ K}) w=−75⋅8.314 J=−623.55 Jw = -75 \cdot 8.314\text{ J} = -623.55\text{ J}

Rounding to three significant figures gives: w=−624 Jw = -624\text{ J}

Key Pitfall: The negative sign indicates that the system expands (ΔV>0\Delta V > 0) and does work on the surroundings. Consequently, the work done on the gas is negative according to the IUPAC convention.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student omits the negative sign in the expansion work formula, calculating a positive value of 623.55 J.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔT=450 K−300 K=150 K\Delta T = 450\text{ K} - 300\text{ K} = 150\text{ K}

  2. Step 2

    w=P∗ΔV=n∗R∗ΔTw = P * \Delta V = n * R * \Delta T

    Correct

    w=−PextΔV=−nRΔTw = -P_{\text{ext}}\Delta V = -nR\Delta T

    You omitted the negative sign in the thermodynamic work definition. By IUPAC convention, work done on the gas during an expansion is defined as w=−PextΔVw = -P_{\text{ext}}\Delta V, which equals −nRΔT-nR\Delta T at constant pressure.

  3. Step 3

    w=(0.500 mol)∗(8.314 J/(mol⋅K))∗(150 K)w = (0.500\text{ mol}) * (8.314\text{ J}/(\text{mol}\cdot\text{K})) * (150\text{ K})

    Correct

    w=−(0.500 mol)⋅(8.314 J/(mol⋅K))⋅(150 K)w = -(0.500\text{ mol}) \cdot (8.314\text{ J}/(\text{mol}\cdot\text{K})) \cdot (150\text{ K})

    You substituted the correct numerical values, but the calculation inherits the missing negative sign from the previous step.

  4. Step 4

    w=623.55 Jw = 623.55\text{ J}

    Correct

    w=−624 Jw = -624\text{ J}

    Because of the missing negative sign and lack of rounding to three significant figures, your final answer has the opposite sign.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the temperature change ΔT=150 K\Delta T = 150\text{ K}.

You recognized that at constant pressure, PΔVP\Delta V can be related directly to nRΔTnR\Delta T using the ideal gas law.

You performed the arithmetic accurately with the correct gas constant and units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention omission in expansion work

You set w=PΔVw = P\Delta V instead of w=−PextΔVw = -P_{\text{ext}}\Delta V, omitting the negative sign for work done on the system.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the general magnitude of mechanical boundary work (PΔVP\Delta V) with the thermodynamic sign convention for work done on the system (w=−PextΔVw = -P_{\text{ext}}\Delta V), where an expanding gas does work on the surroundings and therefore loses energy through work (w<0w < 0).

REASONING PATH
Your ACEpath teacher’s suggested approach
Thermodynamic Work Sign Convention
  • By IUPAC convention, w=−PextΔVw = -P_{\text{ext}}\Delta V. If the gas expands (ΔV>0\Delta V > 0), work done ON the gas is negative (w<0w < 0).

  • Whenever you see 'gas expands' or ΔV>0\Delta V > 0, verify that ww carries a negative sign before finalizing your calculation.

Significant Figures
  • The final result should match the precision of the least precise given measurement.

  • Round the final value −623.55 J-623.55\text{ J} to three significant figures as −624 J-624\text{ J} to match 0.500 mol0.500\text{ mol}, 300 K300\text{ K}, and 450 K450\text{ K}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the work formula with the negative sign: w=−PextΔV=−nRΔTw = -P_{\text{ext}}\Delta V = -nR\Delta T.

  2. Substitute the given values: w=−(0.500 mol)⋅(8.314 J/(mol⋅K))⋅(150 K)w = -(0.500\text{ mol}) \cdot (8.314\text{ J}/(\text{mol}\cdot\text{K})) \cdot (150\text{ K}).

  3. Evaluate the product: w=−623.55 Jw = -623.55\text{ J}.

  4. Round to three significant figures: w=−624 Jw = -624\text{ J}.

Final answer

−624 J-624\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the IUPAC first law of thermodynamics convention (ΔU=q+wΔU = q + w) and practice assigning signs to qq and ww for expansion versus compression.

  • Solve problems where you explicitly write w=−PextΔVw = -P_{\text{ext}}\Delta V as the first step before substituting any values.

  • Remember to check significant figures on the final numerical result.

OverviewACEpath Teacher's Diagnosis

02 The student confuses expansion work with the change in internal energy for a diatomic gas, using Cv = (5/2)R to calculate work.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔT=450 K−300 K=150 K\Delta T = 450\text{ K} - 300\text{ K} = 150\text{ K}

  2. Step 2

    w=−n⋅52R⋅ΔT  ⟹  w=−(0.500 mol)⋅(52)⋅(8.314 J/(mol⋅K))⋅(150 K)w = -n \cdot \frac{5}{2} R \cdot \Delta T \implies w = -(0.500\text{ mol}) \cdot \left(\frac{5}{2}\right) \cdot (8.314\text{ J}/(\text{mol}\cdot\text{K})) \cdot (150\text{ K})

    Correct

    w=−nRΔT=−(0.500 mol)⋅(8.314 J/(mol⋅K))⋅(150 K)w = -nR\Delta T = -(0.500\text{ mol}) \cdot (8.314\text{ J}/(\text{mol}\cdot\text{K})) \cdot (150\text{ K})

    For an ideal gas expanding at constant pressure, boundary work depends strictly on volume change: PΔV=nRΔTP\Delta V = nR\Delta T, so w=−nRΔTw = -nR\Delta T. The factor of 52R\frac{5}{2}R is the molar heat capacity at constant volume (CV,mC_{V,\text{m}}) for a diatomic gas, which belongs to internal energy change (ΔU=nCV,mΔT\Delta U = n C_{V,\text{m}}\Delta T), not pressure-volume work.

  3. Step 3

    w=−1558.88 Jw = -1558.88\text{ J}

    Correct

    w=−624 Jw = -624\text{ J}

    Your arithmetic correctly evaluated the expression you set up, but the result is scaled by 52\frac{5}{2} due to the formula error in step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the temperature increase ΔT=150 K\Delta T = 150\text{ K} accurately.

You correctly included a negative sign to represent expansion work done by the system on the surroundings.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misapplied Heat Capacity to Work Formula

You substituted the constant-volume molar heat capacity of a diatomic gas into the expression for pressure-volume work.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing thermodynamic path functions (ww) with state functions (ΔU\Delta U). While the change in internal energy of an ideal gas always depends on heat capacity via ΔU=nCV,mΔT\Delta U = n C_{V,\text{m}}\Delta T, constant-pressure boundary work is determined solely by w=−PΔV=−nRΔTw = -P\Delta V = -nR\Delta T, regardless of whether the gas is monatomic, diatomic, or polyatomic.

REASONING PATH
Your ACEpath teacher’s suggested approach
Expansion Work Formula
  • For any ideal gas undergoing an isobaric process, Pext=PP_{\text{ext}} = P, and PΔV=nRΔTP\Delta V = nR\Delta T. Therefore, w=−PextΔV=−nRΔTw = -P_{\text{ext}}\Delta V = -nR\Delta T.

  • Do not include heat capacity terms (CVC_V or CpC_p) when calculating mechanical boundary work ww.

Role of Degrees of Freedom
  • Rotational and vibrational degrees of freedom (like the factor of 52\frac{5}{2} for a diatomic gas) dictate thermal energy storage (CVC_V and CpC_p), but they have no effect on the ideal gas equation of state PV=nRTPV = nRT.

  • Reserve CV,m=52RC_{V,\text{m}} = \frac{5}{2}R for ΔU\Delta U and Cp,m=72RC_{p,\text{m}} = \frac{7}{2}R for ΔH\Delta H or isobaric heat qpq_p.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Start from the definition of isobaric expansion work: w=−PextΔVw = -P_{\text{ext}}\Delta V.

  2. Relate volume change to temperature change using the ideal gas equation: PΔV=nRΔTP\Delta V = nR\Delta T.

  3. Substitute the given values directly: w=−(0.500 mol)⋅(8.314 J/(mol⋅K))⋅(150 K)w = -(0.500\text{ mol}) \cdot (8.314\text{ J}/(\text{mol}\cdot\text{K})) \cdot (150\text{ K}).

  4. Calculate the final product: w=−623.55 J≈−624 Jw = -623.55\text{ J} \approx -624\text{ J}.

Final answer

−624 J-624\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between heat (qq), work (ww), and internal energy (ΔU\Delta U) in the First Law of Thermodynamics.

  • Practice deriving isobaric work from PV=nRTPV = nRT to reinforce why ww is independent of gas molecularity.

OverviewACEpath Teacher's Diagnosis

03 The student uses the final temperature instead of the temperature change when evaluating n * R * ΔT, arriving at -1870.65 J.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    w=−P∗ΔV=−n∗R∗Tw = -P * \Delta V = -n * R * T

    Correct

    w=−PextΔV=−nRΔTw = -P_{\text{ext}}\Delta V = -nR\Delta T

    At constant pressure, taking the change of both sides of the ideal gas law gives PΔV=nRΔTP\Delta V = nR\Delta T. Setting PΔV=nRTP\Delta V = nRT confuses the state of the gas with the process change.

  2. Step 2

    w=−(0.500 mol)∗(8.314 J/(mol⋅K))∗(450 K)w = -(0.500\text{ mol}) * (8.314\text{ J}/(\text{mol}\cdot\text{K})) * (450\text{ K})

    Correct

    w=−(0.500 mol)⋅(8.314 J/(mol⋅K))⋅(450 K−300 K)w = -(0.500\text{ mol}) \cdot (8.314\text{ J}/(\text{mol}\cdot\text{K})) \cdot (450\text{ K} - 300\text{ K})

    Because of the formula error in Step 1, you substituted the final temperature 450 K450\text{ K} instead of evaluating ΔT=T2−T1=150 K\Delta T = T_2 - T_1 = 150\text{ K}.

  3. Step 3

    w=−1870.65 Jw = -1870.65\text{ J}

    Correct

    w=−624 Jw = -624\text{ J}

    Carrying through the calculation with ΔT=150 K\Delta T = 150\text{ K} yields −623.55 J-623.55\text{ J}, which rounds to −624 J-624\text{ J}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled the isobaric work definition w=−PextΔVw = -P_{\text{ext}}\Delta V.

You correctly maintained the negative sign convention for work done on an expanding gas.

You carried out the arithmetic accurately based on your substituted numbers.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing a state variable with a change in state

You plugged the final temperature T2=450 KT_2 = 450\text{ K} directly into the equation instead of the temperature difference ΔT=T2−T1\Delta T = T_2 - T_1.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the ideal gas equation PV=nRTPV = nRT as if PΔV=nRTP\Delta V = nRT. For a thermodynamic process where temperature changes at constant pressure and fixed mole count, the differential or change relation is PΔV=nRΔTP\Delta V = nR\Delta T.

REASONING PATH
Your ACEpath teacher’s suggested approach
State Law vs. Process Change
  • For a fixed amount of gas at constant pressure, Δ(PV)=PΔV=nRΔT\Delta(PV) = P\Delta V = nR\Delta T, not nRTnRT.

  • Whenever you see a Δ\Delta on one side of a state equation, make sure the other side also reflects the change in the varying state variables.

Evaluate Temperature Intervals
  • Thermal expansion work depends only on the temperature change ΔT=Tfinal−Tinitial\Delta T = T_{\text{final}} - T_{\text{initial}}.

  • Calculate ΔT\Delta T explicitly before substituting numerical values into the work formula.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Start with the isobaric work relation: w=−PextΔV=−nRΔTw = -P_{\text{ext}}\Delta V = -nR\Delta T.

  2. Find the change in temperature: ΔT=450 K−300 K=150 K\Delta T = 450\text{ K} - 300\text{ K} = 150\text{ K}.

  3. Substitute the parameters into the equation: w=−(0.500 mol)⋅(8.314 J/(mol⋅K))⋅(150 K)=−623.55 Jw = -(0.500\text{ mol}) \cdot (8.314\text{ J}/(\text{mol}\cdot\text{K})) \cdot (150\text{ K}) = -623.55\text{ J}.

Final answer

−624 J-624\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between state functions evaluated at an instant (PV=nRTPV = nRT) and path/process quantities driven by changes (PΔV=nRΔTP\Delta V = nR\Delta T).

  • Complete the three targeted flashcards on isobaric work.

  • Solve the follow-up practice exercises to solidify using ΔT\Delta T in thermodynamic calculations.

Lock it in

Similar question

01

A sample of 1.00 mol1.00\text{ mol} of an ideal gas is cooled at a constant pressure of 1.00 atm1.00\text{ atm} from 400 K400\text{ K} to 250 K250\text{ K}. Calculate the work ww done on the gas in Joules using R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}).

Answer

+1.25×103 J+1.25\times 10^3\text{ J} (or +1247 J+1247\text{ J}). Key steps: ΔT=250 K−400 K=−150 K\Delta T = 250\text{ K} - 400\text{ K} = -150\text{ K}; w=−nRΔT=−(1.00 mol)(8.314 J/(mol⋅K))(−150 K)=+1247.1 J≈+1250 Jw = -nR\Delta T = -(1.00\text{ mol})(8.314\text{ J}/(\text{mol}\cdot\text{K}))(-150\text{ K}) = +1247.1\text{ J} \approx +1250\text{ J}. Work is positive because the gas is compressed.

02

An ideal gas expands from an initial volume of 2.00 L2.00\text{ L} to a final volume of 5.00 L5.00\text{ L} against a constant external pressure of 2.50 atm2.50\text{ atm}. Calculate the work ww done on the gas in Joules (1 L⋅atm=101.325 J1\text{ L}\cdot\text{atm} = 101.325\text{ J}).

Answer

−760 J-760\text{ J}. Key steps: ΔV=5.00 L−2.00 L=3.00 L\Delta V = 5.00\text{ L} - 2.00\text{ L} = 3.00\text{ L}; w=−PextΔV=−(2.50 atm)(3.00 L)=−7.50 L⋅atmw = -P_{\text{ext}}\Delta V = -(2.50\text{ atm})(3.00\text{ L}) = -7.50\text{ L}\cdot\text{atm}; convert units: −7.50 L⋅atm×101.325 J/(L⋅atm)=−759.9 J≈−760 J-7.50\text{ L}\cdot\text{atm} \times 101.325\text{ J}/(\text{L}\cdot\text{atm}) = -759.9\text{ J} \approx -760\text{ J}.

03

During an isobaric heating process at P=1.20 atmP = 1.20\text{ atm}, 0.750 mol0.750\text{ mol} of an ideal gas absorbs 3.50 kJ3.50\text{ kJ} of heat while its temperature rises from 280 K280\text{ K} to 360 K360\text{ K}. Calculate the work ww done on the gas and the change in internal energy ΔU\Delta U of the gas in Joules.

Answer

w=−499 Jw = -499\text{ J} and ΔU=+3001 J\Delta U = +3001\text{ J} (or +3.00 kJ+3.00\text{ kJ}). Key steps: ΔT=360 K−280 K=80 K\Delta T = 360\text{ K} - 280\text{ K} = 80\text{ K}; w=−nRΔT=−(0.750 mol)(8.314 J/(mol⋅K))(80 K)=−498.84 J≈−499 Jw = -nR\Delta T = -(0.750\text{ mol})(8.314\text{ J}/(\text{mol}\cdot\text{K}))(80\text{ K}) = -498.84\text{ J} \approx -499\text{ J}; by the First Law ΔU=q+w=3500 J+(−498.84 J)=3001.16 J≈+3.00×103 J\Delta U = q + w = 3500\text{ J} + (-498.84\text{ J}) = 3001.16\text{ J} \approx +3.00\times 10^3\text{ J}.

Loading workspace…