Resources

A standard electrochemical cell is constructed at 298 K298\text{ K} based on the reaction Zn(s)+Cu2+(aq)⇌Zn2+(aq)+Cu(s)\text{Zn}(s) + \text{Cu}^{2+}(aq) \rightleftharpoons \text{Zn}^{2+}(aq) + \text{Cu}(s), for which the standard cell potential is E∘=+1.100 VE^\circ = +1.100\text{ V}. An experimenter prepares a cell where [Zn2+]=2.50 M[\text{Zn}^{2+}] = 2.50\text{ M} and [Cu2+]=1.00×10−3 M[\text{Cu}^{2+}] = 1.00 \times 10^{-3}\text{ M}. Using the Nernst equation Ecell=E∘−0.0592 Vnlog⁡10QE_{\text{cell}} = E^\circ - \frac{0.0592\text{ V}}{n} \log_{10} Q, calculate the reaction quotient QQ, the non-standard cell potential EcellE_{\text{cell}}, and state whether the cell reaction is spontaneous in the forward direction under these non-standard conditions.

Answer and steps

Final answer

Q=2.50×103Q = 2.50 \times 10^3, Ecell=+1.00 VE_{\text{cell}} = +1.00\text{ V}; because Ecell>0E_{\text{cell}} > 0 (or Q≪KQ \ll K), the reaction is spontaneous in the forward direction.

Steps

01

Write the Expression for the Reaction Quotient (QQ)

For the redox reaction: Zn(s)+CuX2+(aq)⇌ZnX2+(aq)+Cu(s)\ce{Zn(s) + Cu^2+(aq) <=> Zn^2+(aq) + Cu(s)}

Pure solids (Zn\ce{Zn} and Cu\ce{Cu}) have constant activities of 11 and are omitted from the expression. Therefore, the reaction quotient QQ depends only on the molar concentrations of the aqueous ions: Q=[ZnX2+][CuX2+]Q = \frac{[\ce{Zn^2+}]}{[\ce{Cu^2+}]}

Substitute the given concentrations into the expression: Q=2.50 M1.00×10−3 M=2.50×103Q = \frac{2.50\text{ M}}{1.00 \times 10^{-3}\text{ M}} = 2.50 \times 10^3


02

Determine the Number of Moles of Electrons Transferred (nn)

Split the overall reaction into two half-reactions:

  • Oxidation (Anode): Zn(s)→ZnX2+(aq)+2 eX−\ce{Zn(s) -> Zn^2+(aq) + 2e^-}
  • Reduction (Cathode): CuX2+(aq)+2 eX−→Cu(s)\ce{Cu^2+(aq) + 2e^- -> Cu(s)}

Two electrons are transferred per mole of reaction, so n=2n = 2.


03

Calculate the Non-Standard Cell Potential (EcellE_{\text{cell}})

Use the Nernst equation at 298 K298\text{ K}: Ecell=E∘−0.0592 Vnlog⁡10QE_{\text{cell}} = E^\circ - \frac{0.0592\text{ V}}{n} \log_{10} Q

Substitute the known values (E∘=+1.100 VE^\circ = +1.100\text{ V}, n=2n = 2, and Q=2.50×103Q = 2.50 \times 10^3): log⁡10(2.50×103)≈3.398\log_{10}(2.50 \times 10^3) \approx 3.398

Ecell=1.100 V−0.0592 V2⋅3.398E_{\text{cell}} = 1.100\text{ V} - \frac{0.0592\text{ V}}{2} \cdot 3.398 Ecell=1.100 V−(0.0296 V⋅3.398)E_{\text{cell}} = 1.100\text{ V} - (0.0296\text{ V} \cdot 3.398) Ecell=1.100 V−0.1006 V≈+1.00 VE_{\text{cell}} = 1.100\text{ V} - 0.1006\text{ V} \approx +1.00\text{ V}

Common Pitfall: Forgetting to exclude pure solids (Zn\ce{Zn} and Cu\ce{Cu}) from QQ, or using an incorrect value for nn, directly alters the logarithmic correction term and leads to an incorrect cell potential.


04

Evaluate Spontaneity Under the Given Conditions

A cell reaction is spontaneous in the forward direction when its cell potential is strictly positive (Ecell>0E_{\text{cell}} > 0), which corresponds to a negative change in Gibbs free energy (ΔG=−nFEcell<0\Delta G = -nFE_{\text{cell}} < 0).

Because Ecell=+1.00 V>0E_{\text{cell}} = +1.00\text{ V} > 0 (and Q≪KQ \ll K, where K≈1037K \approx 10^{37}), the cell reaction is spontaneous in the forward direction under these non-standard conditions.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student inverts the reaction quotient by writing reactants over products, leading to an erroneously high cell potential.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Q=[Cu2+][Zn2+]  ⟹  Q=1.00×10−32.50=4.00×10−4Q = \frac{[\text{Cu}^{2+}]}{[\text{Zn}^{2+}]} \implies Q = \frac{1.00 \times 10^{-3}}{2.50} = 4.00 \times 10^{-4}

    Correct

    Q=[Zn2+][Cu2+]=2.501.00×10−3=2.50×103Q = \frac{[\text{Zn}^{2+}]}{[\text{Cu}^{2+}]} = \frac{2.50}{1.00 \times 10^{-3}} = 2.50 \times 10^3

    The reaction quotient is defined as the ratio of product activities to reactant activities (excluding pure solids). For Zn(s)+Cu2+(aq)⇌Zn2+(aq)+Cu(s)\text{Zn}(s) + \text{Cu}^{2+}(aq) \rightleftharpoons \text{Zn}^{2+}(aq) + \text{Cu}(s), the aqueous product is Zn2+\text{Zn}^{2+} and the aqueous reactant is Cu2+\text{Cu}^{2+}, so Q=[Zn2+][Cu2+]Q = \frac{[\text{Zn}^{2+}]}{[\text{Cu}^{2+}]}.

  2. Step 2

    n=2n = 2

  3. Step 3

    Ecell=1.100 V−(0.0592 V2)log⁡10(4.00×10−4)  ⟹  Ecell=1.100 V−0.0296 V×(−3.398)  ⟹  Ecell=1.100 V+0.101 V=1.201 VE_{\text{cell}} = 1.100\text{ V} - \left(\frac{0.0592\text{ V}}{2}\right)\log_{10}(4.00 \times 10^{-4}) \implies E_{\text{cell}} = 1.100\text{ V} - 0.0296\text{ V} \times (-3.398) \implies E_{\text{cell}} = 1.100\text{ V} + 0.101\text{ V} = 1.201\text{ V}

    Correct

    Ecell=1.100 V−(0.0592 V2)log⁡10(2.50×103)≈1.100 V−0.101 V=+1.00 VE_{\text{cell}} = 1.100\text{ V} - \left(\frac{0.0592\text{ V}}{2}\right)\log_{10}(2.50 \times 10^3) \approx 1.100\text{ V} - 0.101\text{ V} = +1.00\text{ V}

    Your algebraic execution and evaluation of the Nernst equation were carried out accurately, but substituting the inverted QQ value propagated an error into EcellE_{\text{cell}}.

  4. Step 4

    Because \text{Because } E_{cell\text{cell}} > 0, the reaction is spontaneous in the forward direction.\text{, the reaction is spontaneous in the forward direction.}_

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the number of electrons transferred as n=2n = 2.

You substituted your values into the Nernst equation with correct arithmetic signs and operations.

You correctly connected a positive cell potential to forward spontaneity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Reaction Quotient

You set up QQ as [Cu2+][Zn2+]\frac{[\text{Cu}^{2+}]}{[\text{Zn}^{2+}]} instead of [Zn2+][Cu2+]\frac{[\text{Zn}^{2+}]}{[\text{Cu}^{2+}]}, placing the reactant ion in the numerator.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the equilibrium/reaction quotient convention (always products over reactants) by placing reactant species in the numerator.

REASONING PATH
Your ACEpath teacher’s suggested approach
Formulation of $Q$
  • For any general reaction aA+bB⇌cC+dDaA + bB \rightleftharpoons cC + dD, Q=[C]c[D]d[A]a[B]bQ = \frac{[C]^c [D]^d}{[A]^a [B]^b}, omitting pure solids and liquids.

  • Always write 'Products / Reactants' at the top of your calculation before inserting specific chemical formulas.

Physical Reality Check with Le Chatelier's Principle
  • Having an excess of products ([Zn2+]≫[Cu2+][\text{Zn}^{2+}] \gg [\text{Cu}^{2+}]) opposes the forward reaction and must decrease the cell potential below E∘E^\circ.

  • If products outnumber reactants, verify that Q>1Q > 1 and Ecell<E∘E_{\text{cell}} < E^\circ.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the balanced ionic equation: Zn(s)+Cu2+(aq)⇌Zn2+(aq)+Cu(s)\text{Zn}(s) + \text{Cu}^{2+}(aq) \rightleftharpoons \text{Zn}^{2+}(aq) + \text{Cu}(s).

  2. Set up the reaction quotient with products over reactants: Q=[Zn2+][Cu2+]=2.501.00×10−3=2.50×103Q = \frac{[\text{Zn}^{2+}]}{[\text{Cu}^{2+}]} = \frac{2.50}{1.00 \times 10^{-3}} = 2.50 \times 10^3.

  3. Evaluate the logarithmic term: log⁡10(2.50×103)=log⁡10(2500)≈3.398\log_{10}(2.50 \times 10^3) = \log_{10}(2500) \approx 3.398.

  4. Substitute into the Nernst equation: Ecell=1.100 V−0.0592 V2(3.398)=1.100 V−0.1006 V≈+1.00 VE_{\text{cell}} = 1.100\text{ V} - \frac{0.0592\text{ V}}{2}(3.398) = 1.100\text{ V} - 0.1006\text{ V} \approx +1.00\text{ V}.

Final answer

Q=2.50×103Q = 2.50 \times 10^3, Ecell=+1.00 VE_{\text{cell}} = +1.00\text{ V}; the reaction is spontaneous in the forward direction.

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that the numerator of QQ always contains the products of the chemical equation.

  • Perform a qualitative sanity check: when product ion concentration exceeds reactant ion concentration, the driving force decreases, so EcellE_{\text{cell}} must be lower than E∘E^\circ.

OverviewACEpath Teacher's Diagnosis

02 A student incorrectly assumes n = 1 by looking at individual single-ion charges or coefficients rather than the total moles of electrons transferred, resulting in double the voltage reduction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Q=[Zn2+][Cu2+]  ⟹  Q=2.501.00×10−3=2500Q = \frac{[\text{Zn}^{2+}]}{[\text{Cu}^{2+}]} \implies Q = \frac{2.50}{1.00 \times 10^{-3}} = 2500

  2. Step 2

    n=1n = 1

    Correct

    n=2n = 2

    The oxidation half-reaction is Zn(s)→ZnX2+(aq)+2 eX−\ce{Zn(s) -> Zn^2+(aq) + 2e^-} and the reduction half-reaction is CuX2+(aq)+2 eX−→Cu(s)\ce{Cu^2+(aq) + 2e^- -> Cu(s)}. Each mole of reaction transfers 22 moles of electrons, so n=2n = 2.

  3. Step 3

    Ecell=1.100 V−(0.0592 V1)log⁡10(2500)  ⟹  Ecell=1.100 V−0.201 V=0.899 VE_{\text{cell}} = 1.100\text{ V} - \left(\frac{0.0592\text{ V}}{1}\right) \log_{10}(2500) \implies E_{\text{cell}} = 1.100\text{ V} - 0.201\text{ V} = 0.899\text{ V}

    Correct

    Ecell=1.100 V−(0.0592 V2)log⁡10(2.50×103)≈+1.00 VE_{\text{cell}} = 1.100\text{ V} - \left(\frac{0.0592\text{ V}}{2}\right) \log_{10}(2.50 \times 10^3) \approx +1.00\text{ V}

    Your evaluation of the Nernst formula followed correctly from your value of n=1n = 1, but using n=2n = 2 gives Ecell=1.100 V−0.101 V=+1.00 VE_{\text{cell}} = 1.100\text{ V} - 0.101\text{ V} = +1.00\text{ V}.

  4. Step 4

    Since Ecell=+0.899 V>0, the reaction is spontaneous in the forward direction.\text{Since } E_{\text{cell}} = +0.899\text{ V} > 0\text{, the reaction is spontaneous in the forward direction.}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up the reaction quotient QQ by including only aqueous ions.

You correctly substituted the values into the Nernst equation and completed the logarithmic calculation.

You correctly linked the sign of the cell potential (Ecell>0E_{\text{cell}} > 0) to forward spontaneity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect electron transfer number (n)

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You selected n=1n = 1 by looking at the stoichiometric coefficients of 11 in the balanced equation rather than determining the total number of electrons transferred across the balanced half-reactions.

REASONING PATH
Your ACEpath teacher’s suggested approach
Finding n in Redox Reactions
  • Write out the separated oxidation and reduction half-reactions; nn is the balanced number of moles of electrons transferred between the two half-reactions.

  • Always split the overall equation into oxidation and reduction half-reactions to confirm the exact number of electrons exchanged before substituting into the Nernst equation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Split the reaction into half-reactions: Zn→ZnX2++2 eX−\ce{Zn -> Zn^2+ + 2e^-} and CuX2++2 eX−→Cu\ce{Cu^2+ + 2e^- -> Cu}, confirming n=2n = 2.

  2. Substitute n=2n = 2 into the Nernst equation: Ecell=1.100 V−0.0592 V2log⁡10(2.50×103)E_{\text{cell}} = 1.100\text{ V} - \frac{0.0592\text{ V}}{2} \log_{10}(2.50 \times 10^3).

  3. Calculate the logarithmic correction term: 0.0592 V2×3.398≈0.1006 V\frac{0.0592\text{ V}}{2} \times 3.398 \approx 0.1006\text{ V}.

  4. Subtract to find the potential: Ecell=1.100 V−0.101 V=+1.00 VE_{\text{cell}} = 1.100\text{ V} - 0.101\text{ V} = +1.00\text{ V}.

Final answer

Q=2.50×103Q = 2.50 \times 10^3, Ecell=+1.00 VE_{\text{cell}} = +1.00\text{ V}, and the reaction is spontaneous in the forward direction.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice identifying nn by breaking balanced redox equations into oxidation and reduction half-reactions.

  • Verify that stoichiometric coefficients in the overall equation are not mistaken for the moles of electrons transferred.

OverviewACEpath Teacher's Diagnosis

03 A student adds rather than subtracts the Nernst term, mistakenly using a plus sign in the equation and obtaining an increased potential of 1.201 V.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Q=[Zn2+][Cu2+]  ⟹  Q=2.501.00×10−3=2500Q = \frac{[\text{Zn}^{2+}]}{[\text{Cu}^{2+}]} \implies Q = \frac{2.50}{1.00 \times 10^{-3}} = 2500

  2. Step 2

    n=2n = 2

  3. Step 3

    Ecell=E∘+0.0592 Vnlog⁡10Q  ⟹  Ecell=1.100 V+0.0592 V2log⁡10(2500)  ⟹  Ecell=1.100 V+0.0296 V×3.398=1.201 VE_{\text{cell}} = E^\circ + \frac{0.0592\text{ V}}{n} \log_{10} Q \implies E_{\text{cell}} = 1.100\text{ V} + \frac{0.0592\text{ V}}{2} \log_{10}(2500) \implies E_{\text{cell}} = 1.100\text{ V} + 0.0296\text{ V} \times 3.398 = 1.201\text{ V}

    Correct

    Ecell=E∘−0.0592 Vnlog⁡10Q=1.100 V−0.0592 V2log⁡10(2.50×103)≈+1.00 VE_{\text{cell}} = E^\circ - \frac{0.0592\text{ V}}{n} \log_{10} Q = 1.100\text{ V} - \frac{0.0592\text{ V}}{2} \log_{10}(2.50 \times 10^3) \approx +1.00\text{ V}

    You added the Nernst term instead of subtracting it. Because Q>1Q > 1, product accumulation reduces the electrical driving force, so the non-standard potential must be lower than E∘E^\circ.

  4. Step 4

    Because \text{Because } E_{cell\text{cell}} > 0,  the reaction is spontaneous in the forward direction.\text{ the reaction is spontaneous in the forward direction.}_

    Correct

    Because \text{Because } E_{cell\text{cell}} = +1.00 V\text{ V} > 0,  the reaction is spontaneous in the forward direction.\text{ the reaction is spontaneous in the forward direction.}_

    Your spontaneity reasoning is sound because a positive cell potential means the forward reaction is spontaneous, but your conclusion relied on the incorrect potential value from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly excluded pure solids to set up the reaction quotient QQ.

You accurately calculated Q=2.50×103Q = 2.50 \times 10^3.

You correctly identified that n=2n = 2 electrons are transferred in the redox reaction.

You correctly stated that Ecell>0E_{\text{cell}} > 0 indicates a spontaneous forward reaction.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign Error in Nernst Equation

You wrote a plus sign rather than a minus sign before the 0.0592 Vnlog⁡10Q\frac{0.0592\text{ V}}{n}\log_{10} Q term in the Nernst equation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the thermodynamic relationship ΔG=ΔG∘+RTln⁡Q\Delta G = \Delta G^\circ + RT\ln Q with the electrochemical potential form. Because ΔG=−nFE\Delta G = -nFE, dividing by −nF-nF reverses the sign of the quotient term, yielding Ecell=E∘−RTnFln⁡QE_{\text{cell}} = E^\circ - \frac{RT}{nF}\ln Q.

REASONING PATH
Your ACEpath teacher’s suggested approach
Thermodynamic Derivation Check
  • ΔG=ΔG∘+RTln⁡Q  ⟺  −nFEcell=−nFE∘+RTln⁡Q  ⟹  Ecell=E∘−0.0592 Vnlog⁡10Q\Delta G = \Delta G^\circ + RT\ln Q \iff -nFE_{\text{cell}} = -nFE^\circ + RT\ln Q \implies E_{\text{cell}} = E^\circ - \frac{0.0592\text{ V}}{n}\log_{10} Q at 298 K298\text{ K}.

  • Always verify that the Nernst equation carries a minus sign before the reaction quotient term.

Le Chatelier Physical Sense Check
  • When products exceed reactants (Q>1Q > 1), log⁡10Q>0\log_{10} Q > 0, so the forward driving force decreases and Ecell<E∘E_{\text{cell}} < E^\circ.

  • Before finalizing your answer, check whether Q>1Q > 1 gives Ecell<E∘E_{\text{cell}} < E^\circ and Q<1Q < 1 gives Ecell>E∘E_{\text{cell}} > E^\circ.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Ecell=E∘−0.0592 Vnlog⁡10QE_{\text{cell}} = E^\circ - \frac{0.0592\text{ V}}{n}\log_{10} Q

  2. Ecell=1.100 V−0.0592 V2log⁡10(2.50×103)E_{\text{cell}} = 1.100\text{ V} - \frac{0.0592\text{ V}}{2}\log_{10}(2.50 \times 10^3)

  3. Ecell=1.100 V−(0.0296 V)(3.398)=1.100 V−0.1006 V≈+1.00 VE_{\text{cell}} = 1.100\text{ V} - (0.0296\text{ V})(3.398) = 1.100\text{ V} - 0.1006\text{ V} \approx +1.00\text{ V}

Final answer

Q=2.50×103Q = 2.50 \times 10^3, Ecell=+1.00 VE_{\text{cell}} = +1.00\text{ V}; because Ecell>0E_{\text{cell}} > 0, the reaction is spontaneous in the forward direction.

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the Nernst equation with its negative sign: Ecell=E∘−0.0592 Vnlog⁡10QE_{\text{cell}} = E^\circ - \frac{0.0592\text{ V}}{n}\log_{10} Q.

  • Use Le Chatelier's principle as a mental check: excess products (Q>1Q > 1) must lower the voltage below E∘E^\circ.

Lock it in

Similar question

01

For the galvanic cell reaction Cd(s)+Pb2+(aq)⇌Cd2+(aq)+Pb(s)\text{Cd}(s) + \text{Pb}^{2+}(aq) \rightleftharpoons \text{Cd}^{2+}(aq) + \text{Pb}(s) with E∘=+0.277 VE^\circ = +0.277\text{ V}, calculate QQ and EcellE_{\text{cell}} at 298 K298\text{ K} when [Pb2+]=0.100 M[\text{Pb}^{2+}] = 0.100\text{ M} and [Cd2+]=1.00 M[\text{Cd}^{2+}] = 1.00\text{ M}.

Answer

Q=[Cd2+][Pb2+]=1.000.100=10.0Q = \frac{[\text{Cd}^{2+}]}{[\text{Pb}^{2+}]} = \frac{1.00}{0.100} = 10.0. With n=2n = 2, Ecell=0.277 V−0.05922log⁡10(10.0)=0.277−0.0296=+0.247 VE_{\text{cell}} = 0.277\text{ V} - \frac{0.0592}{2}\log_{10}(10.0) = 0.277 - 0.0296 = +0.247\text{ V}.

02

Consider the cell reaction Mg(s)+2Ag+(aq)⇌Mg2+(aq)+2Ag(s)\text{Mg}(s) + 2\text{Ag}^+(aq) \rightleftharpoons \text{Mg}^{2+}(aq) + 2\text{Ag}(s) with E∘=+3.170 VE^\circ = +3.170\text{ V}. If [Mg2+]=0.200 M[\text{Mg}^{2+}] = 0.200\text{ M} and [Ag+]=2.00×10−2 M[\text{Ag}^+] = 2.00 \times 10^{-2}\text{ M}, calculate QQ and EcellE_{\text{cell}} at 298 K298\text{ K}.

Answer

Q=[Mg2+][Ag+]2=0.200(0.0200)2=500Q = \frac{[\text{Mg}^{2+}]}{[\text{Ag}^+]^2} = \frac{0.200}{(0.0200)^2} = 500. With n=2n = 2, Ecell=3.170 V−0.05922log⁡10(500)=3.170−0.0296(2.699)≈+3.090 VE_{\text{cell}} = 3.170\text{ V} - \frac{0.0592}{2}\log_{10}(500) = 3.170 - 0.0296(2.699) \approx +3.090\text{ V}.

03

A concentration cell is constructed with two copper half-cells: Cu(s)+Cu2+(dilute,1.00×10−4 M)⇌Cu(s)+Cu2+(concentrated,2.00 M)\text{Cu}(s) + \text{Cu}^{2+}(\text{dilute}, 1.00 \times 10^{-4}\text{ M}) \rightleftharpoons \text{Cu}(s) + \text{Cu}^{2+}(\text{concentrated}, 2.00\text{ M}). Determine QQ, the standard potential E∘E^\circ, and the cell potential EcellE_{\text{cell}} at 298 K298\text{ K}.

Answer

For a concentration cell, E∘=0.000 VE^\circ = 0.000\text{ V}. The product is dilute ion and reactant is concentrated ion: Q=[Cu2+]dilute[Cu2+]concentrated=1.00×10−42.00=5.00×10−5Q = \frac{[\text{Cu}^{2+}]_{\text{dilute}}}{[\text{Cu}^{2+}]_{\text{concentrated}}} = \frac{1.00 \times 10^{-4}}{2.00} = 5.00 \times 10^{-5}. With n=2n = 2, Ecell=0−0.05922log⁡10(5.00×10−5)=−0.0296(−4.301)≈+0.127 VE_{\text{cell}} = 0 - \frac{0.0592}{2}\log_{10}(5.00 \times 10^{-5}) = -0.0296(-4.301) \approx +0.127\text{ V}.

Loading workspace…