Resources

Consider the vaporization of liquid bromine: Br2(l)⇌Br2(g)\text{Br}_2(l) \rightleftharpoons \text{Br}_2(g), for which ΔHvap∘=+30.91 kJ/mol\Delta H_{\text{vap}}^\circ = +30.91\text{ kJ/mol} and ΔSvap∘=+93.23 J/(mol⋅K)\Delta S_{\text{vap}}^\circ = +93.23\text{ J}/(\text{mol}\cdot\text{K}). (a) Identify whether the forward phase transition is endothermic or exothermic, and justify in terms of intermolecular forces. (b) Assuming ΔH∘\Delta H^\circ and ΔS∘\Delta S^\circ are approximately independent of temperature, calculate the threshold normal boiling point of bromine in degrees Celsius (∘C^\circ\text{C}) at which the endothermic forward reaction becomes thermodynamically spontaneous under standard pressure (1 atm1\text{ atm}, where ΔG∘≤0\Delta G^\circ \le 0).

Answer and steps

Final answer

(a) Endothermic, because energy must be absorbed by the system to overcome attractive intermolecular London dispersion forces between liquid bromine molecules; (b) Tboil=58.4∘CT_{\text{boil}} = 58.4^\circ\text{C}

Steps

Part (a): Determining the Thermochemical Nature of Vaporization

  1. Sign of Enthalpy Change (ΔH∘\Delta H^\circ): The standard enthalpy of vaporization is given as: ΔHvap∘=+30.91 kJ/mol\Delta H_{\text{vap}}^\circ = +30.91\text{ kJ/mol} Because ΔH∘>0\Delta H^\circ > 0, heat is absorbed from the surroundings into the system, meaning the forward phase change is endothermic.
  2. Justification via Intermolecular Forces: In liquid bromine (BrX2(l)\ce{Br2(l)}), nonpolar diatomic molecules are held in close proximity by attractive intermolecular forces (specifically, London dispersion forces). For molecules to escape the liquid into the gas phase (BrX2(g)\ce{Br2(g)}), these attractive forces must be disrupted and overcome. Breaking or overcoming intermolecular attractions requires an input of kinetic energy, so the system absorbs energy, confirming that the process is endothermic.

Part (b): Calculating the Normal Boiling Point

  1. Condition for Thermodynamic Spontaneity: The standard Gibbs free energy change is defined by: ΔG∘=ΔH∘−TΔS∘\Delta G^\circ = \Delta H^\circ - T\Delta S^\circ At the normal boiling point under standard pressure (1 atm1\text{ atm}), the liquid and vapor phases are at dynamic equilibrium, where ΔG∘=0\Delta G^\circ = 0. The process becomes spontaneous (ΔG∘≤0\Delta G^\circ \le 0) at and above this threshold temperature: 0=ΔH∘−TboilΔS∘  ⟹  Tboil=ΔH∘ΔS∘0 = \Delta H^\circ - T_{\text{boil}}\Delta S^\circ \implies T_{\text{boil}} = \frac{\Delta H^\circ}{\Delta S^\circ}
  2. Unit Consistency:

    Pitfall Alert: ΔH∘\Delta H^\circ is given in kilojoules (kJ\text{kJ}), whereas ΔS∘\Delta S^\circ is given in joules (J\text{J}). Always convert ΔH∘\Delta H^\circ into joules before calculating temperature: ΔH∘=+30.91 kJ/mol=30 910 J/mol\Delta H^\circ = +30.91\text{ kJ/mol} = 30\,910\text{ J/mol} ΔS∘=+93.23 J/(mol⋅K)\Delta S^\circ = +93.23\text{ J}/(\text{mol}\cdot\text{K})

  3. Compute Temperature in Kelvin: Tboil=30 910 J/mol93.23 J/(mol⋅K)≈331.55 KT_{\text{boil}} = \frac{30\,910\text{ J/mol}}{93.23\text{ J}/(\text{mol}\cdot\text{K})} \approx 331.55\text{ K}
  4. Convert to Degrees Celsius (∘C^\circ\text{C}): T(∘C)=T(K)−273.15=331.55−273.15=58.4∘CT(^\circ\text{C}) = T(\text{K}) - 273.15 = 331.55 - 273.15 = 58.4^\circ\text{C}

Thus, the threshold normal boiling point of bromine is 58.4∘C58.4^\circ\text{C}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert ΔH° from kilojoules to joules when applying T = ΔH°/ΔS°, yielding an impossibly small temperature in Kelvin of 0.332 K and -272.8 °C.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Endothermic because heat is absorbed to overcome intermolecular dispersion forces between Br2\text{Br}_2 molecules.

  2. Step 2

    ΔG∘=ΔH∘−TΔS∘=0  ⟹  T=ΔH∘ΔS∘\Delta G^\circ = \Delta H^\circ - T\Delta S^\circ = 0 \implies T = \frac{\Delta H^\circ}{\Delta S^\circ}

  3. Step 3

    T=30.9193.23=0.332 KT = \frac{30.91}{93.23} = 0.332\text{ K}

    Correct

    T=30.91×103 J/mol93.23 J/(mol⋅K)=30 91093.23≈331.55 KT = \frac{30.91 \times 10^3\text{ J/mol}}{93.23\text{ J}/(\text{mol}\cdot\text{K})} = \frac{30\,910}{93.23} \approx 331.55\text{ K}

    You directly substituted ΔH∘=30.91 kJ/mol\Delta H^\circ = 30.91\text{ kJ/mol} without converting kilojoules to joules. Because ΔS∘\Delta S^\circ is in J/(mol⋅K)\text{J}/(\text{mol}\cdot\text{K}), the energy units must match before dividing.

  4. Step 4

    T=0.332−273.15=−272.82 ∘CT = 0.332 - 273.15 = -272.82\text{ }^\circ\text{C}

    Correct

    T(∘C)=331.55−273.15=58.4 ∘CT(^{\circ}\text{C}) = 331.55 - 273.15 = 58.4\text{ }^\circ\text{C}

    You correctly applied the Kelvin-to-Celsius conversion formula T(∘C)=T(K)−273.15T(^{\circ}\text{C}) = T(\text{K}) - 273.15, but the value was thrown off by the unit mismatch in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified vaporization as an endothermic phase transition.

You justified the endothermic nature accurately by explaining that energy is needed to overcome intermolecular London dispersion forces.

You correctly set ΔG∘=0\Delta G^\circ = 0 to express the threshold boiling temperature as T=ΔH∘ΔS∘T = \frac{\Delta H^\circ}{\Delta S^\circ}.

You used the correct relationship to convert temperature from Kelvin to degrees Celsius.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Mismatch in Thermodynamic Calculations

You substituted ΔH∘\Delta H^\circ directly in kilojoules while ΔS∘\Delta S^\circ was expressed in joules.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In thermodynamic equations such as ΔG∘=ΔH∘−TΔS∘\Delta G^\circ = \Delta H^\circ - T\Delta S^\circ, enthalpy values are conventionally tabulated in kJ/mol\text{kJ/mol} while entropy values are tabulated in J/(mol⋅K)\text{J}/(\text{mol}\cdot\text{K}). Dividing them directly without converting kJ\text{kJ} to J\text{J} introduces an error of a factor of 10310^3, leading to a physically unreasonable absolute temperature near absolute zero (0.332 K0.332\text{ K}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Energy Units First
  • Before evaluating ΔG=ΔH−TΔS\Delta G = \Delta H - T\Delta S or T=ΔHΔST = \frac{\Delta H}{\Delta S}, verify that both ΔH\Delta H and ΔS\Delta S use the same energy prefix (either both in J\text{J} or both in kJ\text{kJ}).

  • Multiply ΔH∘\Delta H^\circ by 1000 J/kJ1000\text{ J/kJ} (or divide ΔS∘\Delta S^\circ by 1000 J/kJ1000\text{ J/kJ}) as your very first calculation step.

Perform a Physical Sense Check on Absolute Temperature
  • Absolute temperatures for everyday phase changes under standard pressure are typically tens to hundreds of Kelvin, never fractions of a Kelvin above absolute zero.

  • If your calculated boiling point in Kelvin is less than 1 K1\text{ K}, immediately check whether you forgot a factor of 10001000 between kJ\text{kJ} and J\text{J}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert ΔHvap∘\Delta H_{\text{vap}}^\circ from kJ/mol\text{kJ/mol} to J/mol\text{J/mol}: ΔHvap∘=30.91 kJ/mol×1000 J/kJ=30 910 J/mol\Delta H_{\text{vap}}^\circ = 30.91\text{ kJ/mol} \times 1000\text{ J/kJ} = 30\,910\text{ J/mol}.

  2. Calculate temperature in Kelvin: Tboil=30 910 J/mol93.23 J/(mol⋅K)≈331.55 KT_{\text{boil}} = \frac{30\,910\text{ J/mol}}{93.23\text{ J}/(\text{mol}\cdot\text{K})} \approx 331.55\text{ K}.

  3. Convert to degrees Celsius: T(∘C)=331.55−273.15=58.4 ∘CT(^{\circ}\text{C}) = 331.55 - 273.15 = 58.4\text{ }^\circ\text{C}.

Final answer

(a) Endothermic, because energy is absorbed to overcome intermolecular dispersion forces; (b) Tboil=58.4∘CT_{\text{boil}} = 58.4^\circ\text{C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the units alongside numbers when substituting into thermodynamic equations to catch mismatched prefixes such as kJ\text{kJ} versus J\text{J}.

  • Practice checking whether your final temperature makes chemical sense for common liquid boiling points under atmospheric pressure.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the boiling point in Kelvin correctly but omits the conversion to degrees Celsius, leaving 331.5 K as the final answer.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    exothermic (crossed out) because energy is needed to break intermolecular attractions in the liquid state.\text{exothermic (crossed out) because energy is needed to break intermolecular attractions in the liquid state.}

    Correct

    Endothermic; energy is absorbed by the system to overcome attractive intermolecular forces in the liquid.\text{Endothermic; energy is absorbed by the system to overcome attractive intermolecular forces in the liquid.}

    Your physical reasoning is sound—overcoming intermolecular attractions in liquid bromine requires an input of energy. However, you crossed out "exothermic" and did not write "endothermic" to complete your answer.

  2. Step 2

    Δ\Delta G^∘\circ = 0 at the boiling point\text{ at the boiling point}   ⟹  \implies T = ΔH∘ΔS∘\frac{\Delta H^\circ}{\Delta S^\circ}   ⟹  \implies T = 30910 J/mol93.23 J/(mol⋅K)\frac{30910\text{ J/mol}}{93.23\text{ J}/(\text{mol}\cdot\text{K})} = 331.5 K\text{ K}

  3. Step 3

    T = 331.5 K\text{ K}

    Correct

    T(^{∘\circ}C\text{C}) = 331.55 - 273.15 = 58.4^{∘\circ}C\text{C}

    The question asked for the threshold boiling point in degrees Celsius (∘C^{\circ}\text{C}), but you stopped at Kelvin without subtracting 273.15273.15.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly reasoned that breaking intermolecular attractions requires energy input.

You correctly identified the equilibrium condition ΔG∘=0\Delta G^\circ = 0 at the normal boiling point.

You correctly converted ΔH∘\Delta H^\circ from kJ/mol\text{kJ/mol} to J/mol\text{J/mol} before calculating TT.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted unit conversion / Incomplete classification label

You solved for the boiling point in Kelvin and omitted the final subtraction of 273.15273.15 to reach degrees Celsius.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You focused entirely on the thermodynamic formula calculation and overlooked the specific unit (∘C^{\circ}\text{C}) and classification prompt requirements before finalizing your work.

REASONING PATH
Your ACEpath teacher’s suggested approach
Phase Transition Energetics
  • Breaking intermolecular attractions requires energy input (ΔH>0\Delta H > 0, endothermic); forming attractions releases energy (ΔH<0\Delta H < 0, exothermic).

  • Always explicitly state whether the process is endothermic or exothermic alongside your mechanistic justification.

Final Temperature Scale Check
  • Thermodynamic equations yield absolute temperature in Kelvin (TKT_{\text{K}}); conversion to Celsius requires T∘C=TK−273.15T_{^{\circ}\text{C}} = T_{\text{K}} - 273.15.

  • Re-read the question prompt before boxing your final answer to verify the requested temperature unit.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the absolute temperature in Kelvin to degrees Celsius using T(∘C)=T(K)−273.15T(^{\circ}\text{C}) = T(\text{K}) - 273.15.

  2. T(∘C)=331.55 K−273.15=58.4∘CT(^{\circ}\text{C}) = 331.55\text{ K} - 273.15 = 58.4^{\circ}\text{C}.

Final answer

(a) Endothermic, because energy is required to overcome intermolecular forces in the liquid; (b) 58.4∘C58.4^{\circ}\text{C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write down the explicit classification word (endothermic vs. exothermic) clearly after drafting your explanation.

  • Underline the requested units (such as ∘C^{\circ}\text{C} vs. K\text{K}) in the prompt to ensure the final calculation includes the required scale conversion.

OverviewACEpath Teacher's Diagnosis

03 The student adds 273.15 instead of subtracting it when converting the temperature from Kelvin to degrees Celsius, arriving at 604.7 °C.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Endothermic, since vaporization requires absorbing energy to overcome intermolecular forces between liquid molecules.

  2. Step 2

    ΔG∘=ΔH∘−TΔS∘=0  ⟹  T=ΔH∘ΔS∘\Delta G^\circ = \Delta H^\circ - T\Delta S^\circ = 0 \implies T = \frac{\Delta H^\circ}{\Delta S^\circ}

  3. Step 3

    T=3091093.23=331.55 KT = \frac{30910}{93.23} = 331.55\text{ K}

  4. Step 4

    T(∘C)=331.55+273.15=604.7∘CT(^\circ\text{C}) = 331.55 + 273.15 = 604.7^\circ\text{C}

    Correct

    T(∘C)=331.55−273.15=58.4∘CT(^\circ\text{C}) = 331.55 - 273.15 = 58.4^\circ\text{C}

    To convert from Kelvin to degrees Celsius, you must subtract 273.15273.15 (T(∘C)=T(K)−273.15T(^\circ\text{C}) = T(\text{K}) - 273.15). Adding 273.15273.15 converts degrees Celsius to Kelvin.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified the vaporization process as endothermic based on the energy required to overcome intermolecular forces.

You correctly related the boiling point threshold to the thermodynamic equilibrium condition where ΔG∘=0\Delta G^\circ = 0.

You carefully matched energy units by converting kilojoules to joules before dividing by entropy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Temperature scale conversion error

You accidentally added 273.15273.15 instead of subtracting it during the final temperature conversion from Kelvin to Celsius.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the direction of the temperature scale conversion formula: T(K)=T(∘C)+273.15T(\text{K}) = T(^\circ\text{C}) + 273.15 versus T(∘C)=T(K)−273.15T(^\circ\text{C}) = T(\text{K}) - 273.15.

REASONING PATH
Your ACEpath teacher’s suggested approach
Kelvin to Celsius Conversion Direction
  • T(∘C)=T(K)−273.15T(^\circ\text{C}) = T(\text{K}) - 273.15

  • Always check that the numerical value in degrees Celsius is smaller than the numerical value in Kelvin for any temperature above absolute zero.

Sanity Check with Water
  • 0∘C=273.15 K0^\circ\text{C} = 273.15\text{ K} and 100∘C=373.15 K100^\circ\text{C} = 373.15\text{ K}

  • Mentally benchmark your conversion against water's freezing or boiling point to confirm whether you need to add or subtract 273.15273.15.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. T(∘C)=T(K)−273.15T(^\circ\text{C}) = T(\text{K}) - 273.15

  2. T(∘C)=331.55−273.15=58.4∘CT(^\circ\text{C}) = 331.55 - 273.15 = 58.4^\circ\text{C}

Final answer

58.4 ^$\circC\text{C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the relationship between the Kelvin and Celsius scales, noting that T(K)T(\text{K}) is always greater than T(∘C)T(^\circ\text{C}) by 273.15273.15.

  • Practice two-way temperature conversions with common phase-change temperatures to solidify the correct operational sign.

Lock it in

Similar question

01

Liquid mercury has ΔHvap∘=+59.11 kJ/mol\Delta H_{\text{vap}}^\circ = +59.11\text{ kJ/mol} and ΔSvap∘=+92.92 J/(mol⋅K)\Delta S_{\text{vap}}^\circ = +92.92\text{ J}/(\text{mol}\cdot\text{K}). Calculate the normal boiling point of mercury in degrees Celsius (∘C^\circ\text{C}).

Answer

Tboil=363.0∘CT_{\text{boil}} = 363.0^\circ\text{C}. Key steps: Convert ΔH∘=59 110 J/mol\Delta H^\circ = 59\,110\text{ J/mol}; T=59 110 J/mol92.92 J/(mol⋅K)≈636.14 KT = \frac{59\,110\text{ J/mol}}{92.92\text{ J}/(\text{mol}\cdot\text{K})} \approx 636.14\text{ K}; T(∘C)=636.14−273.15=363.0∘CT(^{\circ}\text{C}) = 636.14 - 273.15 = 363.0^\circ\text{C}.

02

For the vaporization of ethanol, ΔHvap∘=+38.56 kJ/mol\Delta H_{\text{vap}}^\circ = +38.56\text{ kJ/mol} and its normal boiling point is 78.37∘C78.37^\circ\text{C}. Calculate the standard entropy of vaporization ΔSvap∘\Delta S_{\text{vap}}^\circ in J/(mol⋅K)\text{J}/(\text{mol}\cdot\text{K}).

Answer

ΔSvap∘=+109.7 J/(mol⋅K)\Delta S_{\text{vap}}^\circ = +109.7\text{ J}/(\text{mol}\cdot\text{K}). Key steps: Convert boiling point to Kelvin: T=78.37+273.15=351.52 KT = 78.37 + 273.15 = 351.52\text{ K}. Convert ΔH∘=38 560 J/mol\Delta H^\circ = 38\,560\text{ J/mol}. Solve for entropy: ΔS∘=ΔH∘T=38 560 J/mol351.52 K≈109.7 J/(mol⋅K)\Delta S^\circ = \frac{\Delta H^\circ}{T} = \frac{38\,560\text{ J/mol}}{351.52\text{ K}} \approx 109.7\text{ J}/(\text{mol}\cdot\text{K}).

03

A solid sublimes according to A(s)⇌A(g)\text{A}(s) \rightleftharpoons \text{A}(g) with ΔHsubl∘=+24.8 kJ/mol\Delta H_{\text{subl}}^\circ = +24.8\text{ kJ/mol} and ΔSsubl∘=+85.0 J/(mol⋅K)\Delta S_{\text{subl}}^\circ = +85.0\text{ J}/(\text{mol}\cdot\text{K}). (a) Determine the threshold sublimation temperature in ∘C^\circ\text{C}. (b) If a student mistakenly calculates T=24.885.0T = \frac{24.8}{85.0}, explain why the resulting temperature is physically impossible.

Answer

(a) Tsubl=18.6∘CT_{\text{subl}} = 18.6^\circ\text{C} (from T=24 800 J/mol85.0 J/(mol⋅K)=291.76 K  ⟹  18.6∘CT = \frac{24\,800\text{ J/mol}}{85.0\text{ J}/(\text{mol}\cdot\text{K})} = 291.76\text{ K} \implies 18.6^\circ\text{C}). (b) Without the unit conversion, T=0.292 K=−272.86∘CT = 0.292\text{ K} = -272.86^\circ\text{C}, which is less than 0.3 K0.3\text{ K} above absolute zero—an impossibly cold temperature for standard sublimation of a molecular compound.

Loading workspace…