Resources

A student prepares a buffer solution containing 0.150 M0.150\text{ M} nitrous acid (HNO2\text{HNO}_2, Ka=4.00×10−4K_a = 4.00 \times 10^{-4}) and potassium nitrite (KNO2\text{KNO}_2) at 25∘C25^\circ\text{C}. If the measured pH\text{pH} of the buffer is 3.6003.600, determine: (a) the molar concentration ratio of conjugate base to weak acid, [NO2−][HNO2]\frac{[\text{NO}_2^-]}{[\text{HNO}_2]}, and (b) the percent ionization of HNO2\text{HNO}_2 in this buffer system.

Answer and steps

Final answer

(a) [NO2−][HNO2]=1.59\frac{[\text{NO}_2^-]}{[\text{HNO}_2]} = 1.59; (b) Percent Ionization=0.167%\text{Percent Ionization} = 0.167\%

Steps

Part (a): Determine the Ratio [NOX2X−][HNOX2]\frac{[\ce{NO2-}]}{[\ce{HNO2}]}

  1. Relate pH\text{pH} to hydronium ion concentration: From the definition of pH\text{pH}: [HX+]=10−pH=10−3.600≈2.512×10−4 M[\ce{H+}] = 10^{-\text{pH}} = 10^{-3.600} \approx 2.512 \times 10^{-4}\text{ M}
  2. Apply the acid-dissociation constant expression: The equilibrium expression for the ionization of nitrous acid, HNOX2(aq)⇌HX+(aq)+NOX2X−(aq)\ce{HNO2(aq) <=> H+(aq) + NO2-(aq)}, is: Ka=[HX+][NOX2X−][HNOX2]K_a = \frac{[\ce{H+}][\ce{NO2-}]}{[\ce{HNO2}]}
  3. Solve for the ratio of conjugate base to weak acid: Rearranging the equilibrium expression gives: [NOX2X−][HNOX2]=Ka[HX+]\frac{[\ce{NO2-}]}{[\ce{HNO2}]} = \frac{K_a}{[\ce{H+}]} Substitute the given values into the equation: [NOX2X−][HNOX2]=4.00×10−42.512×10−4≈1.59\frac{[\ce{NO2-}]}{[\ce{HNO2}]} = \frac{4.00 \times 10^{-4}}{2.512 \times 10^{-4}} \approx 1.59

(Alternative method: Using the Henderson–Hasselbalch equation, pH=pKa+log⁡([NOX2X−][HNOX2])\text{pH} = \text{p}K_a + \log\left(\frac{[\ce{NO2-}]}{[\ce{HNO2}]}\right), where pKa=−log⁡(4.00×10−4)≈3.398\text{p}K_a = -\log(4.00 \times 10^{-4}) \approx 3.398. Then log⁡([NOX2X−][HNOX2])=3.600−3.398=0.202\log\left(\frac{[\ce{NO2-}]}{[\ce{HNO2}]}\right) = 3.600 - 3.398 = 0.202, yielding 100.202≈1.5910^{0.202} \approx 1.59.)


Part (b): Determine the Percent Ionization of HNOX2\ce{HNO2}

  1. Understand what constitutes ionized acid: When a molecule of HNOX2\ce{HNO2} ionizes, it produces one HX+\ce{H+} ion and one NOX2X−\ce{NO2-} ion: HNOX2(aq)⇌HX+(aq)+NOX2X−(aq)\ce{HNO2(aq) <=> H+(aq) + NO2-(aq)} Because autoionization of water contributes negligibly ([OHX−]≈4×10−11 M[\ce{OH-}] \approx 4 \times 10^{-11}\text{ M}), all [HX+][\ce{H+}] in solution originates from the dissociation of HNOX2\ce{HNO2}. Therefore, the concentration of HNOX2\ce{HNO2} that has ionized equals [HX+][\ce{H+}].

    Common Pitfall: Do not use the total equilibrium concentration [NOX2X−][\ce{NO2-}] to determine the amount ionized. In a buffer, the vast majority of NOX2X−\ce{NO2-} comes from the added salt (KNOX2\ce{KNO2}), which suppresses the dissociation of HNOX2\ce{HNO2} via the common-ion effect.

  2. Calculate the percent ionization: Percent Ionization=[HNOX2]ionized[HNOX2]initial×100%=[HX+][HNOX2]initial×100%\text{Percent Ionization} = \frac{[\ce{HNO2}]_{\text{ionized}}}{[\ce{HNO2}]_{\text{initial}}} \times 100\% = \frac{[\ce{H+}]}{[\ce{HNO2}]_{\text{initial}}} \times 100\% Percent Ionization=2.512×10−4 M0.150 M×100%≈0.167%\text{Percent Ionization} = \frac{2.512 \times 10^{-4}\text{ M}}{0.150\text{ M}} \times 100\% \approx 0.167\%

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the Henderson-Hasselbalch ratio as acid over base instead of base over acid, resulting in an inverted concentration ratio of 0.628.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    pKa=−log⁡(4.00×10−4)=3.398\text{p}K_a = -\log(4.00 \times 10^{-4}) = 3.398

  2. Step 2

    pH=pKa+log⁡([HNO2]/[NO2−])  ⟹  3.600=3.398+log⁡([HNO2]/[NO2−])  ⟹  log⁡([HNO2]/[NO2−])=0.202  ⟹  [HNO2]/[NO2−]=10(0.202)=1.59\text{pH} = \text{p}K_a + \log([\text{HNO}_2]/[\text{NO}_2^-]) \implies 3.600 = 3.398 + \log([\text{HNO}_2]/[\text{NO}_2^-]) \implies \log([\text{HNO}_2]/[\text{NO}_2^-]) = 0.202 \implies [\text{HNO}_2]/[\text{NO}_2^-] = 10^{(0.202)} = 1.59

    Correct

    pH=pKa+log⁡([NO2−][HNO2])  ⟹  3.600=3.398+log⁡([NO2−][HNO2])  ⟹  log⁡([NO2−][HNO2])=0.202\text{pH} = \text{p}K_a + \log\left(\frac{[\text{NO}_2^-]}{[\text{HNO}_2]}\right) \implies 3.600 = 3.398 + \log\left(\frac{[\text{NO}_2^-]}{[\text{HNO}_2]}\right) \implies \log\left(\frac{[\text{NO}_2^-]}{[\text{HNO}_2]}\right) = 0.202

    You placed [HNO2][NO2−]\frac{[\text{HNO}_2]}{[\text{NO}_2^-]} inside the logarithm of the Henderson–Hasselbalch equation. The equation requires the ratio of conjugate base to weak acid, [A−][HA]\frac{[\text{A}^-]}{[\text{HA}]}.

  3. Step 3

    [NO2−]/[HNO2]=11.59=0.628[\text{NO}_2^-]/[\text{HNO}_2] = \frac{1}{1.59} = 0.628

    Correct

    [NO2−][HNO2]=100.202≈1.59\frac{[\text{NO}_2^-]}{[\text{HNO}_2]} = 10^{0.202} \approx 1.59

    Because the logarithmic expression was inverted in Step 2, taking the reciprocal propagated that error to your final ratio for part (a).

  4. Step 4

    [H+]=10−3.600=2.51×10−4 M  ⟹  Percent ionization=2.51×10−40.150×100%=0.167%[\text{H}^+] = 10^{-3.600} = 2.51 \times 10^{-4}\text{ M} \implies \text{Percent ionization} = \frac{2.51 \times 10^{-4}}{0.150} \times 100\% = 0.167\%

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted the given KaK_a value to pKa\text{p}K_a.

You correctly related the solution pH\text{pH} to [H+][\text{H}^+].

You recognized that only [H+][\text{H}^+] reflects the ionized nitrous acid concentration, correctly avoiding the common-ion pitfall in part (b).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula setup error (Henderson–Hasselbalch ratio inversion)

You inverted the quotient inside the logarithmic term of the Henderson–Hasselbalch equation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the order of terms in the Henderson–Hasselbalch log term: remembering it as pH=pKa+log⁡([acid][base])\text{pH} = \text{p}K_a + \log\left(\frac{[\text{acid}]}{[\text{base}]}\right) rather than pH=pKa+log⁡([base][acid])\text{pH} = \text{p}K_a + \log\left(\frac{[\text{base}]}{[\text{acid}]}\right). A quick qualitative check is that when pH>pKa\text{pH} > \text{p}K_a, the basic form must dominate ([base]>[acid][\text{base}] > [\text{acid}]), which means [base][acid]>1\frac{[\text{base}]}{[\text{acid}]} > 1.

REASONING PATH
Your ACEpath teacher’s suggested approach
Henderson–Hasselbalch Log Ratio Rule
  • pH=pKa+log⁡([conjugate base][weak acid])\text{pH} = \text{p}K_a + \log\left(\frac{[\text{conjugate base}]}{[\text{weak acid}]}\right)

  • Always place the conjugate base concentration in the numerator and the weak acid concentration in the denominator when adding the log term.

Qualitative Buffer Sanity Check
  • If pH>pKa\text{pH} > \text{p}K_a, then [base]>[acid][\text{base}] > [\text{acid}]; if pH<pKa\text{pH} < \text{p}K_a, then [acid]>[base][\text{acid}] > [\text{base}].

  • Compare your calculated pH\text{pH} and pKa\text{p}K_a: here 3.600>3.3983.600 > 3.398, so [NO2−][\text{NO}_2^-] must be greater than [HNO2][\text{HNO}_2], meaning the ratio must be greater than 11.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the standard Henderson–Hasselbalch equation: pH=pKa+log⁡([NO2−][HNO2])\text{pH} = \text{p}K_a + \log\left(\frac{[\text{NO}_2^-]}{[\text{HNO}_2]}\right).

  2. Substitute pH=3.600\text{pH} = 3.600 and pKa=3.398\text{p}K_a = 3.398: 3.600=3.398+log⁡([NO2−][HNO2])3.600 = 3.398 + \log\left(\frac{[\text{NO}_2^-]}{[\text{HNO}_2]}\right).

  3. Isolate the logarithm: log⁡([NO2−][HNO2])=3.600−3.398=0.202\log\left(\frac{[\text{NO}_2^-]}{[\text{HNO}_2]}\right) = 3.600 - 3.398 = 0.202.

  4. Take 1010 to the power of both sides: [NO2−][HNO2]=100.202≈1.59\frac{[\text{NO}_2^-]}{[\text{HNO}_2]} = 10^{0.202} \approx 1.59.

Final answer

(a) [NO2−][HNO2]=1.59\frac{[\text{NO}_2^-]}{[\text{HNO}_2]} = 1.59; (b) Percent Ionization=0.167%\text{Percent Ionization} = 0.167\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the mnemonic 'base over acid' or derive the Henderson–Hasselbalch equation directly from Ka=[H+][A−][HA]K_a = \frac{[\text{H}^+][\text{A}^-]}{[\text{HA}]} whenever in doubt.

  • Perform a sanity check on buffer ratios: whenever pH>pKa\text{pH} > \text{p}K_a, verify that your ratio [base][acid]\frac{[\text{base}]}{[\text{acid}]} evaluates to a number strictly greater than 11.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the percent ionization of pure 0.150 M nitrous acid without accounting for the common-ion effect of nitrite already present in the buffer.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    pKa=−log⁡(4.00×10−4)=3.398  ⟹  3.600=3.398+log⁡([NO2−][HNO2])  ⟹  log⁡([NO2−][HNO2])=0.202  ⟹  [NO2−][HNO2]=100.202=1.59\text{p}K_a = -\log(4.00 \times 10^{-4}) = 3.398 \implies 3.600 = 3.398 + \log\left(\frac{[\text{NO}_2^-]}{[\text{HNO}_2]}\right) \implies \log\left(\frac{[\text{NO}_2^-]}{[\text{HNO}_2]}\right) = 0.202 \implies \frac{[\text{NO}_2^-]}{[\text{HNO}_2]} = 10^{0.202} = 1.59

  2. Step 2

    Ka=x20.150−x≈x20.150  ⟹  x2=4.00×10−4×0.150=6.00×10−5  ⟹  x=6.00×10−5=7.75×10−3 MK_a = \frac{x^2}{0.150 - x} \approx \frac{x^2}{0.150} \implies x^2 = 4.00 \times 10^{-4} \times 0.150 = 6.00 \times 10^{-5} \implies x = \sqrt{6.00 \times 10^{-5}} = 7.75 \times 10^{-3}\text{ M}

    Correct

    [H+]=10−pH=10−3.600≈2.512×10−4 M=[HNO2]ionized[\text{H}^+] = 10^{-\text{pH}} = 10^{-3.600} \approx 2.512 \times 10^{-4}\text{ M} = [\text{HNO}_2]_{\text{ionized}}

    You set up a standard weak-acid ICE table (Ka≈x2CaK_a \approx \frac{x^2}{C_a}), which assumes no initial conjugate base is present. In this buffer, potassium nitrite is present and strongly suppresses the dissociation of HNO2\text{HNO}_2 via the common-ion effect. Because every ionized HNO2\text{HNO}_2 molecule yields one H+\text{H}^+, the ionized concentration is simply [H+]=10−pH[\text{H}^+] = 10^{-\text{pH}}.

  3. Step 3

    Percent ionization=(7.75×10−30.150)×100%=5.17%\text{Percent ionization} = \left(\frac{7.75 \times 10^{-3}}{0.150}\right) \times 100\% = 5.17\%

    Correct

    Percent ionization=(2.512×10−40.150)×100%≈0.167%\text{Percent ionization} = \left(\frac{2.512 \times 10^{-4}}{0.150}\right) \times 100\% \approx 0.167\%

    You used the correct percent ionization formula, but substituted the incorrect ionized concentration from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly determined the conjugate base to acid ratio [NO2−][HNO2]=1.59\frac{[\text{NO}_2^-]}{[\text{HNO}_2]} = 1.59 using the Henderson–Hasselbalch relationship.

You used the correct defining formula for percent ionization as [ionized][initial]×100%\frac{[\text{ionized}]}{[\text{initial}]} \times 100\%.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Ignoring Common-Ion Effect in Buffer

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the weak acid in part (b) as an isolated weak-acid solution dissociating in pure water rather than recognizing that the buffer already contains conjugate base that suppresses dissociation, and that [H+][\text{H}^+] from the given pH\text{pH} directly provides the amount ionized.

REASONING PATH
Your ACEpath teacher’s suggested approach
Ionized weak acid in a buffer
  • For a monoprotic weak acid HA⇌H++A−\text{HA} \rightleftharpoons \text{H}^+ + \text{A}^-, each ionized acid molecule produces one H+\text{H}^+, so [HA]ionized=[H+]=10−pH[\text{HA}]_{\text{ionized}} = [\text{H}^+] = 10^{-\text{pH}}.

  • Do not solve Ka=x2CaK_a = \frac{x^2}{C_a} when a buffer or common ion is present; find [H+][\text{H}^+] directly from the known pH\text{pH}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the equilibrium hydronium concentration from the buffer pH\text{pH}: [H+]=10−3.600≈2.512×10−4 M[\text{H}^+] = 10^{-3.600} \approx 2.512 \times 10^{-4}\text{ M}.

  2. Equate [HNO2]ionized[\text{HNO}_2]_{\text{ionized}} to [H+][\text{H}^+] since water autoionization is negligible.

  3. Calculate percent ionization: 2.512×10−4 M0.150 M×100%≈0.167%\frac{2.512 \times 10^{-4}\text{ M}}{0.150\text{ M}} \times 100\% \approx 0.167\%.

Final answer

(a) [NO2−][HNO2]=1.59\frac{[\text{NO}_2^-]}{[\text{HNO}_2]} = 1.59; (b) Percent Ionization=0.167%\text{Percent Ionization} = 0.167\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice distinguishing between pure weak-acid dissociation ([H+]=[A−]=x[\text{H}^+] = [\text{A}^-] = x) and buffered weak-acid dissociation where common-ion suppression occurs.

  • Remember that when the equilibrium pH\text{pH} of a buffer is already provided, [H+][\text{H}^+] is directly known without solving a quadratic or ICE expression.

OverviewACEpath Teacher's Diagnosis

03 The student miscalculates the hydrogen ion concentration by using the negative exponent incorrectly as 10^(3.600) instead of 10^(-3.600), or subtracting pH from 14 to confuse [H⁺] with [OH⁻], yielding an incorrect percent ionization.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    pKa=−log⁡(4.00×10−4)=3.398  ⟹  3.600=3.398+log⁡([NOX2X−][HNOX2])  ⟹  log⁡([NOX2X−][HNOX2])=0.202  ⟹  [NOX2X−][HNOX2]=100.202=1.59\text{p}K_a = -\log(4.00 \times 10^{-4}) = 3.398 \implies 3.600 = 3.398 + \log\left(\frac{[\ce{NO2-}]}{[\ce{HNO2}]}\right) \implies \log\left(\frac{[\ce{NO2-}]}{[\ce{HNO2}]}\right) = 0.202 \implies \frac{[\ce{NO2-}]}{[\ce{HNO2}]} = 10^{0.202} = 1.59

  2. Step 2

    pOH=14.000−3.600=10.400  ⟹  [HX+]=10−10.400=3.98×10−11 M\text{pOH} = 14.000 - 3.600 = 10.400 \implies [\ce{H+}] = 10^{-10.400} = 3.98 \times 10^{-11}\text{ M}

    Correct

    [HX+]=10−pH=10−3.600≈2.512×10−4 M[\ce{H+}] = 10^{-\text{pH}} = 10^{-3.600} \approx 2.512 \times 10^{-4}\text{ M}

    You calculated pOH\text{pOH} and assigned 10−pOH10^{-\text{pOH}} to [HX+][\ce{H+}]. The formula 10−pOH10^{-\text{pOH}} gives the hydroxide concentration [OHX−][\ce{OH-}], whereas hydronium ion concentration is directly obtained from pH\text{pH} via [HX+]=10−pH[\ce{H+}] = 10^{-\text{pH}}.

  3. Step 3

    Percent ionization=3.98×10−110.150×100%=2.65×10−8%\text{Percent ionization} = \frac{3.98 \times 10^{-11}}{0.150} \times 100\% = 2.65 \times 10^{-8}\%

    Correct

    Percent ionization=2.512×10−4 M0.150 M×100%≈0.167%\text{Percent ionization} = \frac{2.512 \times 10^{-4}\text{ M}}{0.150\text{ M}} \times 100\% \approx 0.167\%

    You correctly set up the percent ionization ratio as [HX+][HNOX2]initial×100%\frac{[\ce{H+}]}{[\ce{HNO2}]_{\text{initial}}} \times 100\%, but the result was affected by the incorrect value of [HX+][\ce{H+}] from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the pKa\text{p}K_a of nitrous acid from KaK_a.

You correctly applied the Henderson–Hasselbalch relation to determine the concentration ratio [NOX2X−][HNOX2]\frac{[\ce{NO2-}]}{[\ce{HNO2}]}.

You correctly recognized that the amount of weak acid ionized in a buffer equals [HX+][\ce{H+}].

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing [H+] with [OH-] via pOH

You took an unnecessary extra step to calculate pOH=10.400\text{pOH} = 10.400 and then computed [HX+]=10−pOH[\ce{H+}] = 10^{-\text{pOH}}, which actually yields [OHX−][\ce{OH-}].

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the logarithmic definitions of pH\text{pH} and pOH\text{pOH}: remember that [HX+]=10−pH[\ce{H+}] = 10^{-\text{pH}} directly, without converting through 14−pH14 - \text{pH}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Direct Relationship Between pH and [H+]
  • [HX+]=10−pH[\ce{H+}] = 10^{-\text{pH}} and [OHX−]=10−pOH[\ce{OH-}] = 10^{-\text{pOH}}.

  • Convert directly from pH\text{pH} to [HX+][\ce{H+}] by raising 1010 to the negative pH\text{pH}.

Percent Ionization in a Buffer
  • Percent ionization=[HX+][HA]initial×100%\text{Percent ionization} = \frac{[\ce{H+}]}{[\text{HA}]_{\text{initial}}} \times 100\%.

  • Use [HX+][\ce{H+}] (not [AX−][\ce{A-}]) for the numerator because added conjugate base suppresses dissociation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate [HX+][\ce{H+}] directly from pH\text{pH}: [HX+]=10−3.600≈2.512×10−4 M[\ce{H+}] = 10^{-3.600} \approx 2.512 \times 10^{-4}\text{ M}.

  2. Substitute [HX+][\ce{H+}] into the percent ionization formula: Percent ionization=2.512×10−4 M0.150 M×100%\text{Percent ionization} = \frac{2.512 \times 10^{-4}\text{ M}}{0.150\text{ M}} \times 100\%.

  3. Evaluate the percentage: Percent ionization≈0.167%\text{Percent ionization} \approx 0.167\%.

Final answer

(a) [NOX2X−][HNOX2]=1.59\frac{[\ce{NO2-}]}{[\ce{HNO2}]} = 1.59; (b) $Percent Ionization\text{Percent Ionization} = 0.167%$$

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write down the fundamental definition [HX+]=10−pH[\ce{H+}] = 10^{-\text{pH}} before calculating hydronium concentration.

  • Check that acidic solutions (pH<7\text{pH} < 7) have [HX+]>10−7 M[\ce{H+}] > 10^{-7}\text{ M} as a quick sanity check against accidental pOH\text{pOH} substitution.

Lock it in

Similar question

01

A buffer solution is made from acetic acid (CH3COOH\text{CH}_3\text{COOH}, pKa=4.76\text{p}K_a = 4.76) and sodium acetate (CH3COONa\text{CH}_3\text{COONa}). If the buffer has a pH\text{pH} of 5.065.06, calculate the molar concentration ratio [CH3COO−][CH3COOH]\frac{[\text{CH}_3\text{COO}^-]}{[\text{CH}_3\text{COOH}]}.

Answer

[CH3COO−][CH3COOH]=2.0\frac{[\text{CH}_3\text{COO}^-]}{[\text{CH}_3\text{COOH}]} = 2.0. Steps: log⁡([CH3COO−][CH3COOH])=pH−pKa=5.06−4.76=0.30  ⟹  100.30≈2.0\log\left(\frac{[\text{CH}_3\text{COO}^-]}{[\text{CH}_3\text{COOH}]}\right) = \text{pH} - \text{p}K_a = 5.06 - 4.76 = 0.30 \implies 10^{0.30} \approx 2.0.

02

A formic acid buffer solution contains 0.200 M HCOOH0.200\text{ M}\ \text{HCOOH} (Ka=1.80×10−4K_a = 1.80 \times 10^{-4}) and potassium formate (HCOOK\text{HCOOK}) at 25∘C25^\circ\text{C}. The solution has a pH\text{pH} of 3.503.50. Find: (a) the molar ratio [HCOO−][HCOOH]\frac{[\text{HCOO}^-]}{[\text{HCOOH}]}, and (b) the percent ionization of formic acid in this buffer.

Answer

(a) 0.5690.569; (b) 0.158%0.158\%. Steps: pKa=−log⁡(1.80×10−4)=3.745\text{p}K_a = -\log(1.80 \times 10^{-4}) = 3.745. Ratio [HCOO−][HCOOH]=103.50−3.745=10−0.245≈0.569\frac{[\text{HCOO}^-]}{[\text{HCOOH}]} = 10^{3.50 - 3.745} = 10^{-0.245} \approx 0.569. [H+]=10−3.50=3.16×10−4 M[\text{H}^+] = 10^{-3.50} = 3.16 \times 10^{-4}\text{ M}. Percent ionization=3.16×10−4 M0.200 M×100%≈0.158%\text{Percent ionization} = \frac{3.16 \times 10^{-4}\text{ M}}{0.200\text{ M}} \times 100\% \approx 0.158\%.

03

You need to prepare 500.0 mL500.0\text{ mL} of a buffer of pH=7.00\text{pH} = 7.00 using 0.100 M NaH2PO40.100\text{ M}\ \text{NaH}_2\text{PO}_4 and 0.100 M Na2HPO40.100\text{ M}\ \text{Na}_2\text{HPO}_4 (Ka2=6.20×10−8K_{a2} = 6.20 \times 10^{-8} for H2PO4−\text{H}_2\text{PO}_4^-). Determine the volume (in mL\text{mL}) of each solution needed, assuming additive volumes.

Answer

191 mL Na2HPO4191\text{ mL}\ \text{Na}_2\text{HPO}_4 and 309 mL NaH2PO4309\text{ mL}\ \text{NaH}_2\text{PO}_4. Steps: pKa=−log⁡(6.20×10−8)=7.208\text{p}K_a = -\log(6.20 \times 10^{-8}) = 7.208. [HPO42−][H2PO4−]=107.00−7.208=10−0.208≈0.619\frac{[\text{HPO}_4^{2-}]}{[\text{H}_2\text{PO}_4^-]} = 10^{7.00 - 7.208} = 10^{-0.208} \approx 0.619. Since equimolar, Vbase/Vacid=0.619V_{\text{base}} / V_{\text{acid}} = 0.619. With Vbase+Vacid=500.0 mLV_{\text{base}} + V_{\text{acid}} = 500.0\text{ mL}, 1.619Vacid=500.0  ⟹  Vacid≈309 mL1.619 V_{\text{acid}} = 500.0 \implies V_{\text{acid}} \approx 309\text{ mL} and Vbase≈191 mLV_{\text{base}} \approx 191\text{ mL}.

Loading workspace…