Resources

An aqueous solution is prepared by dissolving 0.0250 mol0.0250\text{ mol} of hydrobromic acid (HBr\text{HBr}) in enough pure distilled water to produce exactly 500.0 mL500.0\text{ mL} of solution at 25.0∘C25.0^\circ\text{C}. Classify HBr\text{HBr} as a strong acid, weak acid, strong base, or weak base, determine the hydronium ion concentration [H3O+][\text{H}_3\text{O}^+], and calculate the final pH\text{pH} of the solution.

Answer and steps

Final answer

HBr\text{HBr} is a strong acid; [H3O+]=0.0500 M[\text{H}_3\text{O}^+] = 0.0500\text{ M}; pH=1.301\text{pH} = 1.301

Steps

01

Classify the Substance

Hydrobromic acid (HBr\ce{HBr}) is one of the standard strong monoprotic acids (along with HCl\ce{HCl}, HI\ce{HI}, HNOX3\ce{HNO3}, HClOX4\ce{HClO4}, and HClOX3\ce{HClO3}). Because its conjugate base (BrX−\ce{Br-}) is extremely weak, HBr\ce{HBr} ionizes completely in dilute aqueous solutions:

HBr(aq)+HX2O(l)→HX3OX+(aq)+BrX−(aq)\ce{HBr(aq) + H2O(l) -> H3O+(aq) + Br-(aq)}

Therefore, HBr\ce{HBr} is classified as a strong acid.


02

Calculate the Molar Concentration of the Solution

Convert the solution volume from milliliters to liters:

V=500.0 mL=0.5000 LV = 500.0\text{ mL} = 0.5000\text{ L}

Use the definition of molarity (M=nVM = \frac{n}{V}):

[HBr]0=0.0250 mol0.5000 L=0.0500 M[\ce{HBr}]_0 = \frac{0.0250\text{ mol}}{0.5000\text{ L}} = 0.0500\text{ M}


03

Determine the Hydronium Ion Concentration [HX3OX+][\ce{H3O+}]

Because HBr\ce{HBr} dissociates completely in a 1:11:1 stoichiometric ratio with hydronium ions, the concentration of HX3OX+\ce{H3O+} produced from the acid is equal to the initial concentration of HBr\ce{HBr}:

[HX3OX+]acid=0.0500 M[\ce{H3O+}]_{\text{acid}} = 0.0500\text{ M}

The autoionization of pure water produces [HX3OX+]water≈1.0×10−7 M[\ce{H3O+}]_{\text{water}} \approx 1.0 \times 10^{-7}\text{ M}, which is negligible compared to 0.0500 M0.0500\text{ M}.

Thus:

[HX3OX+]=0.0500 M[\ce{H3O+}] = 0.0500\text{ M}


04

Calculate the pH\text{pH} of the Solution

The pH\text{pH} is defined as the negative base-1010 logarithm of the hydronium ion concentration:

pH=−log⁡10[HX3OX+]\text{pH} = -\log_{10}[\ce{H3O+}]

Substitute [HX3OX+]=0.0500 M=5.00×10−2 M[\ce{H3O+}] = 0.0500\text{ M} = 5.00 \times 10^{-2}\text{ M}:

pH=−log⁡10(0.0500)≈1.301\text{pH} = -\log_{10}(0.0500) \approx 1.301

Key Pitfall to Avoid:

  • Significant figures in logarithms: When taking the logarithm of a measurement, the number of significant figures in the original value (0.05000.0500 has 33 significant figures) determines the number of decimal places in the pH\text{pH} value (1.3011.301 has 33 decimal places).
  • Do not set up an equilibrium ICE table or search for an acid dissociation constant (KaK_a); strong acids dissociate 100%100\%, so no equilibrium calculation is needed.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert milliliters to liters when calculating molarity, resulting in a hydronium concentration of 0.0000500 M and an incorrect pH of 4.301.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    HBr is a strong acid\ce{HBr}\text{ is a strong acid}

  2. Step 2

    [HX3OX+]=0.0250 mol500.0 mL=0.0000500 M[\ce{H3O+}] = \frac{0.0250\text{ mol}}{500.0\text{ mL}} = 0.0000500\text{ M}

    Correct

    [HX3OX+]=0.0250 mol0.5000 L=0.0500 M[\ce{H3O+}] = \frac{0.0250\text{ mol}}{0.5000\text{ L}} = 0.0500\text{ M}

    Molarity is defined as moles of solute per liter of solution (mol/L\text{mol}/\text{L}). Dividing moles directly by milliliters yields mol/mL\text{mol}/\text{mL}, which is off by a factor of 10001000.

  3. Step 3

    pH=−log⁡(0.0000500)  ⟹  pH=4.301\text{pH} = -\log(0.0000500) \implies \text{pH} = 4.301

    Correct

    pH=−log⁡(0.0500)=1.301\text{pH} = -\log(0.0500) = 1.301

    Your logarithmic calculation and significant figure rounding were executed properly, but the numerical result was affected by the incorrect concentration from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified HBr\ce{HBr} as a strong acid.

You recognized that a strong monoprotic acid dissociates completely, so [HX3OX+]=[HBr]0[\ce{H3O+}] = [\ce{HBr}]_0.

You applied the definition pH=−log⁡[HX3OX+]\text{pH} = -\log[\ce{H3O+}] with the correct number of decimal places for significant figures.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Volume Unit Conversion Error in Molarity

You divided moles by 500.0 mL500.0\text{ mL} instead of converting to 0.5000 L0.5000\text{ L}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked the required SI unit for the denominator in molarity, which must always be liters (L\text{L}) rather than milliliters (mL\text{mL}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Molarity Unit Rule
  • Molarity (M)=n (mol)V (L)\text{Molarity } (M) = \frac{n\text{ (mol)}}{V\text{ (L)}}

  • Always convert milliliters to liters by dividing by 10001000 before calculating molar concentration.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the volume: V=500.0 mL=0.5000 LV = 500.0\text{ mL} = 0.5000\text{ L}.

  2. Calculate molarity: [HX3OX+]=0.0250 mol0.5000 L=0.0500 M[\ce{H3O+}] = \frac{0.0250\text{ mol}}{0.5000\text{ L}} = 0.0500\text{ M}.

  3. Calculate pH\text{pH}: pH=−log⁡10(0.0500)=1.301\text{pH} = -\log_{10}(0.0500) = 1.301.

Final answer

HBr is a strong acid;[HX3OX+]=0.0500 M;pH=1.301\ce{HBr}\text{ is a strong acid}; [\ce{H3O+}] = 0.0500\text{ M}; \text{pH} = 1.301

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down explicit unit factors such as ×1 L1000 mL\times \frac{1\text{ L}}{1000\text{ mL}} whenever volume is given in milliliters.

  • Sanity-check acid pH\text{pH} values: a moderately concentrated strong acid solution should have a pH\text{pH} well below 22, so a pH\text{pH} above 44 is an immediate signal to check for a factor-of-10001000 volume error.

OverviewACEpath Teacher's Diagnosis

02 The student misidentifies HBr as a strong base, calculating [OH-] instead of [H3O+] and finding a pOH of 1.301 with a resulting pH of 12.699.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    HBr is a strong base\ce{HBr}\text{ is a strong base}

    Correct

    HBr is a strong acid\ce{HBr}\text{ is a strong acid}

    Hydrobromic acid (HBr\ce{HBr}) is a hydrogen halide that acts as a strong Arrhenius and Brønsted–Lowry acid, completely dissociating into HX3OX+\ce{H3O+} and BrX−\ce{Br-} in aqueous solution.

  2. Step 2

    V=500.0 mL=0.5000 L  ⟹  [OHX−]=0.0250 mol0.5000 L=0.0500 M  ⟹  [HX3OX+]=1.0×10−140.0500=2.0×10−13 MV = 500.0\text{ mL} = 0.5000\text{ L} \implies [\ce{OH-}] = \frac{0.0250\text{ mol}}{0.5000\text{ L}} = 0.0500\text{ M} \implies [\ce{H3O+}] = \frac{1.0 \times 10^{-14}}{0.0500} = 2.0 \times 10^{-13}\text{ M}

    Correct

    V=500.0 mL=0.5000 L  ⟹  [HBr]=0.0250 mol0.5000 L=0.0500 M  ⟹  [HX3OX+]=0.0500 MV = 500.0\text{ mL} = 0.5000\text{ L} \implies [\ce{HBr}] = \frac{0.0250\text{ mol}}{0.5000\text{ L}} = 0.0500\text{ M} \implies [\ce{H3O+}] = 0.0500\text{ M}

    Your volume conversion and concentration math were completely sound, but because HBr\ce{HBr} releases HX+\ce{H+} rather than OHX−\ce{OH-}, the 0.0500 M0.0500\text{ M} solution corresponds directly to [HX3OX+][\ce{H3O+}], not [OHX−][\ce{OH-}].

  3. Step 3

    pOH=−log⁡(0.0500)=1.301  ⟹  pH=14.000−1.301=12.699\text{pOH} = -\log(0.0500) = 1.301 \implies \text{pH} = 14.000 - 1.301 = 12.699

    Correct

    pH=−log⁡[HX3OX+]=−log⁡(0.0500)=1.301\text{pH} = -\log[\ce{H3O+}] = -\log(0.0500) = 1.301

    Because [HX3OX+][\ce{H3O+}] is 0.0500 M0.0500\text{ M}, taking −log⁡[HX3OX+]-\log[\ce{H3O+}] gives the solution's pH\text{pH} directly as 1.3011.301. Your subsequent subtraction from 14.00014.000 resulted from the initial base misclassification.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted milliliters to liters correctly.

You applied the molarity formula M=nVM = \frac{n}{V} accurately.

You evaluated base-10 logarithms with correct significant figure rules.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Acid/base classification error

You treated hydrobromic acid as a hydroxide source rather than a proton donor.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the list of common binary strong acids with strong bases, leading to calculating [OHX−][\ce{OH-}] instead of [HX3OX+][\ce{H3O+}].

REASONING PATH
Your ACEpath teacher’s suggested approach
Recognizing the Seven Strong Acids
  • The seven common strong monoprotic and diprotic acids are HCl\ce{HCl}, HBr\ce{HBr}, HI\ce{HI}, HNOX3\ce{HNO3}, HClOX3\ce{HClO3}, HClOX4\ce{HClO4}, and HX2SOX4\ce{H2SO4}. Strong bases are typically alkali metal hydroxides (such as NaOH\ce{NaOH} and KOH\ce{KOH}) or soluble alkaline earth metal hydroxides (such as Ba(OH)X2\ce{Ba(OH)2} and Ca(OH)X2\ce{Ca(OH)2}).

  • Check the chemical formula for ionizable hydrogen (leading H\ce{H}) versus hydroxide (OHX−\ce{OH-}). Since HBr\ce{HBr} has an ionizable proton and no hydroxide group, classify it immediately as a strong acid.

Connecting Strong Acid Dissociation Directly to pH
  • For a strong monoprotic acid HA\ce{HA}, [HX3OX+]=[HA]0[\ce{H3O+}] = [\ce{HA}]_0.

  • Set [HX3OX+][\ce{H3O+}] equal to the dissolved molarity and compute pH=−log⁡[HX3OX+]\text{pH} = -\log[\ce{H3O+}] directly without calculating pOH\text{pOH} first.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Classify HBr\ce{HBr} as a strong acid because it ionizes completely: HBr(aq)+HX2O(l)→HX3OX+(aq)+BrX−(aq)\ce{HBr(aq) + H2O(l) -> H3O+(aq) + Br-(aq)}.

  2. Determine the hydronium ion concentration: [HX3OX+]=[HBr]0=0.0250 mol0.5000 L=0.0500 M[\ce{H3O+}] = [\ce{HBr}]_0 = \frac{0.0250\text{ mol}}{0.5000\text{ L}} = 0.0500\text{ M}.

  3. Calculate the pH\text{pH} directly: pH=−log⁡(0.0500)=1.301\text{pH} = -\log(0.0500) = 1.301.

Final answer

HBr is a strong acid; [HX3OX+]=0.0500 M; pH=1.301\ce{HBr}\text{ is a strong acid; }[\ce{H3O+}] = 0.0500\text{ M};\text{ pH} = 1.301

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the standard list of 7 strong acids (HCl\ce{HCl}, HBr\ce{HBr}, HI\ce{HI}, HNOX3\ce{HNO3}, HClOX4\ce{HClO4}, HClOX3\ce{HClO3}, HX2SOX4\ce{H2SO4}).

  • Practice identifying whether a formula donates HX+\ce{H+} (acid) or provides OHX−\ce{OH-} (base) before setting up concentration variables.

  • Check that your final pH\text{pH} makes physical sense: acidic solutions must have a pH<7\text{pH} < 7 at 25∘C25^\circ\text{C}.

OverviewACEpath Teacher's Diagnosis

03 The student directly uses the moles of solute instead of molarity in the pH formula, yielding a pH of 1.602.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    HBr is a strong acid  ⟹  HBr dissociates completely\ce{HBr}\text{ is a strong acid} \implies \ce{HBr}\text{ dissociates completely}

  2. Step 2

    [HX3OX+]=0.0250 M[\ce{H3O+}] = 0.0250\text{ M}

    Correct

    [HX3OX+]=nV=0.0250 mol0.5000 L=0.0500 M[\ce{H3O+}] = \frac{n}{V} = \frac{0.0250\text{ mol}}{0.5000\text{ L}} = 0.0500\text{ M}

    You substituted the amount of acid in moles (0.0250 mol0.0250\text{ mol}) directly as the molarity. Brackets indicate molar concentration, which requires dividing moles by the solution volume in liters (500.0 mL=0.5000 L500.0\text{ mL} = 0.5000\text{ L}).

  3. Step 3

    pH=−log⁡(0.0250)  ⟹  pH=1.602\text{pH} = -\log(0.0250) \implies \text{pH} = 1.602

    Correct

    pH=−log⁡(0.0500)=1.301\text{pH} = -\log(0.0500) = 1.301

    You correctly applied the formula pH=−log⁡[HX3OX+]\text{pH} = -\log[\ce{H3O+}] and preserved the proper three decimal places for three significant figures, but the numerical result was affected by the incorrect concentration from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that HBr\ce{HBr} is a strong acid and that it dissociates completely in water.

You applied the correct mathematical definition for pH=−log⁡[HX3OX+]\text{pH} = -\log[\ce{H3O+}].

You correctly followed logarithm significant figure rules by reporting three decimal places for a three-significant-figure input.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Concentration vs. Moles Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the amount of substance (n=0.0250 moln = 0.0250\text{ mol}) as the molar concentration (MM) without dividing by the solution volume (V=0.5000 LV = 0.5000\text{ L}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Square Brackets Mean Molarity
  • Square brackets [X][\text{X}] denote molar concentration in mol/L\text{mol}/\text{L}, calculated as [X]=nsoluteVsolution (in L)[\text{X}] = \frac{n_{\text{solute}}}{V_{\text{solution (in L)}}}.

  • Always convert solution volume to liters and compute molesliters\frac{\text{moles}}{\text{liters}} before inserting values into brackets or equilibrium expressions.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the solution volume to liters: V=500.0 mL=0.5000 LV = 500.0\text{ mL} = 0.5000\text{ L}.

  2. Calculate the hydronium ion concentration: [HX3OX+]=0.0250 mol0.5000 L=0.0500 M[\ce{H3O+}] = \frac{0.0250\text{ mol}}{0.5000\text{ L}} = 0.0500\text{ M}.

  3. Compute the pH\text{pH}: pH=−log⁡10(0.0500)=1.301\text{pH} = -\log_{10}(0.0500) = 1.301.

Final answer

HBr\ce{HBr} is a strong acid; [HX3OX+]=0.0500 M[\ce{H3O+}] = 0.0500\text{ M}; pH=1.301\text{pH} = 1.301

NEXT STEPS
Final Takeaways from Your Teacher
  • Before writing down brackets [HX3OX+][\ce{H3O+}], double-check whether the given quantity is in moles or molarity.

  • Practice converting volumes from milliliters to liters (1 L=1000 mL1\text{ L} = 1000\text{ mL}) as the first step of solution stoichiometry problems.

Lock it in

Similar question

01

A solution is prepared by dissolving 0.0150 mol0.0150\text{ mol} of hydrochloric acid (HCl\ce{HCl}) in water to make 250.0 mL250.0\text{ mL} of solution at 25.0∘C25.0^\circ\text{C}. Classify HCl\ce{HCl}, find [HX3OX+][\ce{H3O+}], and calculate the pH\text{pH}.

Answer

HCl\ce{HCl} is a strong acid. Convert volume: V=0.2500 LV = 0.2500\text{ L}. [HX3OX+]=0.0150 mol0.2500 L=0.0600 M[\ce{H3O+}] = \frac{0.0150\text{ mol}}{0.2500\text{ L}} = 0.0600\text{ M}. pH=−log⁡(0.0600)=1.222\text{pH} = -\log(0.0600) = 1.222.

02

An aqueous solution contains 0.00480 mol0.00480\text{ mol} of nitric acid (HNOX3\ce{HNO3}) in 120.0 mL120.0\text{ mL} of solution. Determine [HX3OX+][\ce{H3O+}] and [OHX−][\ce{OH-}] at 25.0∘C25.0^\circ\text{C}.

Answer

HNOX3\ce{HNO3} is a strong monoprotic acid. V=0.1200 LV = 0.1200\text{ L}. [HX3OX+]=0.00480 mol0.1200 L=0.0400 M[\ce{H3O+}] = \frac{0.00480\text{ mol}}{0.1200\text{ L}} = 0.0400\text{ M}. Using Kw=1.00×10−14K_w = 1.00 \times 10^{-14}, [OHX−]=1.00×10−140.0400=2.50×10−13 M[\ce{OH-}] = \frac{1.00 \times 10^{-14}}{0.0400} = 2.50 \times 10^{-13}\text{ M}.

03

A student dissolves 0.100 g0.100\text{ g} of solid sodium hydroxide (NaOH\ce{NaOH}, molar mass 40.00 g/mol40.00\text{ g/mol}) in water to form 500.0 mL500.0\text{ mL} of solution at 25.0∘C25.0^\circ\text{C}. Classify NaOH\ce{NaOH} and determine the final pH\text{pH} of the solution.

Answer

NaOH\ce{NaOH} is a strong base that dissociates completely. Moles: n=0.100 g40.00 g/mol=0.00250 moln = \frac{0.100\text{ g}}{40.00\text{ g/mol}} = 0.00250\text{ mol}. Volume: V=0.5000 LV = 0.5000\text{ L}. [OHX−]=0.00250 mol0.5000 L=0.00500 M[\ce{OH-}] = \frac{0.00250\text{ mol}}{0.5000\text{ L}} = 0.00500\text{ M}. pOH=−log⁡(0.00500)=2.301\text{pOH} = -\log(0.00500) = 2.301. pH=14.000−2.301=11.699\text{pH} = 14.000 - 2.301 = 11.699.

Loading workspace…