Resources
A chemistry student is provided with four distinct liquid preparations in clean, stoppered flasks at : (1) a completely dissolved solution of of table salt () in of distilled water, (2) an undissolved mixture of of calcium carbonate () powder vigorously shaken in of water showing visible sediment after standing, (3) a single-phase brass alloy rod consisting of copper and zinc by mass, and (4) an emulsion of of vegetable oil dispersed in of water. Classify each of the four preparations as either a homogeneous mixture or a heterogeneous mixture, and identify the single-phase systems.
Answer and steps
Final answer
Preparations (1) and (3) are homogeneous mixtures (single-phase systems); preparations (2) and (4) are heterogeneous mixtures (multi-phase systems).
Steps
Understanding Mixtures and Phases
A mixture consists of two or more pure substances physically combined without chemical bonding. Mixtures are classified based on the uniformity of their composition:
- Homogeneous mixture: A mixture that has a completely uniform composition and properties throughout. It consists of a single physical phase (a single-phase system), meaning no boundary separates the components even at a microscopic level.
- Heterogeneous mixture: A mixture that does not have a uniform composition throughout. It consists of two or more distinct physical states or regions separated by visible or microscopic boundaries (a multi-phase system).
Step-by-Step Classification of Each Preparation
-
Preparation (1): Completely dissolved table salt () in water
- Observation: The salt dissolves completely, dissociating into sodium ions () and chloride ions () surrounded by water molecules.
- Analysis: The dissolved ions are distributed evenly throughout the liquid. There are no phase boundaries, and any sample taken from the flask has identical composition.
- Classification: Homogeneous mixture (single-phase system).
-
Preparation (2): Calcium carbonate () powder in water with visible sediment
- Observation: Calcium carbonate is practically insoluble in water. Upon standing, solid particles settle to the bottom as sediment.
- Analysis: The flask contains two distinct phases: a solid sediment layer at the bottom and a liquid layer above it. The composition varies depending on whether a sample is taken from the top liquid or the bottom layer.
- Classification: Heterogeneous mixture (multi-phase system).
-
Preparation (3): Single-phase brass alloy rod ( and )
- Observation: Brass is a solid solution where zinc atoms are uniformly incorporated into the copper crystal lattice.
- Analysis: Although both components are metals, they form a uniform, single solid phase with no distinct phase boundaries.
- Common Pitfall: Learners often assume mixtures must be liquids. Solid solutions, such as uniform alloys, are classic examples of homogeneous mixtures.
- Classification: Homogeneous mixture (single-phase system).
-
Preparation (4): Emulsion of vegetable oil in water
- Observation: Oil and water are immiscible liquids. An emulsion consists of tiny droplets of oil dispersed within the water.
- Analysis: Even if shaken to create a cloudy suspension, distinct microscopic boundaries separate the hydrophobic oil droplets from the surrounding aqueous phase. Because it contains separate liquid phases, it is non-uniform.
- Classification: Heterogeneous mixture (multi-phase system).
Conclusion
- Homogeneous mixtures (single-phase systems): Preparation (1) and Preparation (3).
- Heterogeneous mixtures (multi-phase systems): Preparation (2) and Preparation (4).
Typical errors
01 The student believes alloys must be heterogeneous because they contain two separate solid metals mixed together, leading to misclassifying brass.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Dissolved in water has uniform composition throughout: homogeneous mixture.
- Step 2
powder forms visible sediment at the bottom: heterogeneous mixture.
- Step 3
Brass contains two different solid metals (copper and zinc): heterogeneous mixture.
CorrectBrass is a solid solution of copper and zinc with uniform atomic distribution: homogeneous mixture.
Even though brass contains two distinct elements, zinc atoms are uniformly integrated into the copper crystal lattice without any phase boundaries, making it a single-phase solid solution.
- Step 4
Oil droplets dispersed in water form two separate liquid phases: heterogeneous mixture.
- Step 5
Only preparation 1 has a single uniform phase throughout.
CorrectPreparations (1) and (3) are single-phase systems.
Because brass was misclassified as heterogeneous in the previous step, it was excluded here. Both homogeneous mixtures—preparation (1) and preparation (3)—are single-phase systems.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly applied the definition of phase uniformity to aqueous solutions and suspensions.
You correctly identified that oil and water form separate phases in an emulsion.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou assumed that mixing two different solid metals necessarily produces distinct phases.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisHomogeneous mixtures are often intuitively associated only with transparent liquids or gases. A solid solution, such as a single-phase alloy, is also a homogeneous mixture because the solute atoms are distributed uniformly throughout the solvent lattice on an atomic scale with no phase boundaries.
REASONING PATH
Your ACEpath teacher’s suggested approach- Solid Solutions as Homogeneous Mixtures
A mixture is homogeneous if it has a completely uniform composition and consists of a single physical phase, regardless of whether that phase is gas, liquid, or solid.
Check whether the components form a single uniform crystal lattice or separate grain boundaries; a single-phase alloy like brass is a homogeneous mixture.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify the physical state and phase boundaries of the brass alloy. Zinc atoms dissolve substitutionally into the copper crystal lattice, creating a uniform atomic distribution with no distinct phase boundaries.
Classify brass as a single-phase solid solution (homogeneous mixture).
Combine all homogeneous preparations: (1) and (3) are single-phase systems; (2) and (4) are heterogeneous mixtures.
Preparations (1) and (3) are homogeneous mixtures (single-phase systems); preparations (2) and (4) are heterogeneous mixtures (multi-phase systems).
02 The student confuses macroscopic opacity/dispersion with a uniform single phase, mistakenly classifying an emulsion as a homogeneous solution.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
is completely dissolved in water: homogeneous mixture.
- Step 2
does not dissolve and shows visible sediment: heterogeneous mixture.
- Step 3
Brass is a uniform solid solution: homogeneous mixture.
- Step 4
Vegetable oil is evenly dispersed throughout the water: homogeneous mixture.
CorrectVegetable oil and water are immiscible liquids; an emulsion consists of microscopic oil droplets suspended in water with distinct phase boundaries: heterogeneous mixture.
Even though oil droplets may appear dispersed throughout the water, oil and water are immiscible. Microscopic phase boundaries separate the oil droplets from the surrounding water, making it a two-phase heterogeneous mixture (emulsion).
- Step 5
Preparations 1, 3, and 4 are single-phase systems.
CorrectOnly preparations (1) and (3) are single-phase systems.
Because preparation (4) was mistakenly classified as homogeneous, you included it here. Only preparations (1) and (3) consist of a single phase throughout.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that completely dissolved solutes in water form homogeneous mixtures.
You correctly recognized that suspensions with visible sediment are heterogeneous mixtures.
You correctly identified solid alloys such as brass as homogeneous mixtures.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated an even macroscopic dispersion of immiscible liquids as a uniform single phase. In chemistry, a mixture is homogeneous only if it is uniform at the molecular level with no phase boundaries; emulsions contain distinct droplets separated by interfacial boundaries, making them multi-phase heterogeneous systems.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check for Phase Boundaries at the Microscopic Scale
A single-phase (homogeneous) mixture has uniform composition down to individual molecules or ions, with zero phase boundaries. Emulsions and colloidal suspensions have distinct phase boundaries between droplets/particles and the dispersing medium.
Whenever two immiscible liquids are shaken or emulsified, look for droplets suspended in another liquid: this confirms a multi-phase heterogeneous system.
CORRECTED PATH
ACEpath Teacher's DemonstrationRecall that vegetable oil is nonpolar and water is polar, so they are immiscible.
An emulsion consists of tiny microscopic droplets of oil suspended in water, meaning distinct physical interfaces (boundaries) exist between the two liquid phases.
Because multiple phases coexist, preparation (4) is a heterogeneous mixture.
Consequently, only preparations (1) and (3) consist of a single phase without boundaries.
Preparations (1) and (3) are homogeneous mixtures (single-phase systems); preparations (2) and (4) are heterogeneous mixtures (multi-phase systems).
Lock it in
Can a solid mixture be classified as a homogeneous mixture?
Yes. A solid solution (such as brass or bronze) has a uniform composition throughout and forms a single solid phase.
Similar question
A sample of yellow gold consists of gold, silver, and copper melted together and solidified into a uniform, single crystalline phase. Classify this sample as either a homogeneous or heterogeneous mixture, and state the number of physical phases present.
Answer
Homogeneous mixture; it contains exactly physical phase (a solid solution with no phase boundaries).
A sealed glass bulb contains nitrogen gas (), oxygen gas (), a small piece of dry ice (solid ), and liquid water () at . Determine the total number of phases present in the bulb and classify the overall system.
Answer
The system contains distinct phases: a gas phase (homogeneous mixture of , , and water vapor), a liquid phase (liquid water with trace dissolved gases), and a solid phase (solid ). Because multiple distinct phases exist, the overall system is heterogeneous.
Solder is an alloy traditionally made of tin and lead. Near the eutectic composition (, ), solidifying the liquid produces micro-scale alternating lamellar bands of almost pure solid tin and almost pure solid lead. Classify this solidified eutectic solder as homogeneous or heterogeneous, and explain your reasoning based on phase boundaries.
Answer
Heterogeneous mixture. Because solidification produces distinct microscopic domains (grains) of pure tin and pure lead, distinct phase boundaries exist between the two solid metals, making it a multi-phase solid system rather than a single solid solution.