Resources

A student dissolves a 10.6 g10.6\text{ g} sample of solid anhydrous sodium carbonate (Na2CO3\text{Na}_2\text{CO}_3, molar mass =106.0 g/mol= 106.0\text{ g/mol}) into 150.0 g150.0\text{ g} of water inside a coffee-cup calorimeter of negligible heat capacity. The temperature of the solution increases from 21.50∘C21.50^{\circ}\text{C} to 23.65∘C23.65^{\circ}\text{C}. Assuming the specific heat capacity of the final solution is equal to that of pure water (c=4.184 J/(g⋅∘C)c = 4.184\text{ J}/(\text{g}\cdot^{\circ}\text{C})), reverse engineer the experimental molar enthalpy of solution, ΔHsoln\Delta H_{\text{soln}}, in kJ/mol\text{kJ/mol}, for Na2CO3(s)→2Na+(aq)+CO32−(aq)\text{Na}_2\text{CO}_3(s) \rightarrow 2\text{Na}^+(aq) + \text{CO}_3^{2-}(aq).

Answer and steps

Final answer

ΔHsoln=−14.5 kJ/mol\Delta H_{\text{soln}} = -14.5\text{ kJ/mol}

Steps

01

Find the total mass of the solution and the temperature change

When a solid dissolves in a liquid inside a calorimeter, the resulting solution absorbs or releases heat. The total mass of the solution includes both the solvent and the solute:

msoln=mwater+msolute=150.0 g+10.6 g=160.6 gm_{\text{soln}} = m_{\text{water}} + m_{\text{solute}} = 150.0\text{ g} + 10.6\text{ g} = 160.6\text{ g}

Next, determine the temperature change (ΔT\Delta T):

ΔT=Tfinal−Tinitial=23.65∘C−21.50∘C=+2.15∘C\Delta T = T_{\text{final}} - T_{\text{initial}} = 23.65^{\circ}\text{C} - 21.50^{\circ}\text{C} = +2.15^{\circ}\text{C}

Common Pitfall: A frequent mistake is using only the mass of water (150.0 g150.0\text{ g}) instead of the combined mass of the solution (160.6 g160.6\text{ g}). The heat is distributed throughout the entire homogeneous solution.


02

Calculate the heat absorbed by the solution (qsolnq_{\text{soln}})

Using the specific heat formula q=m⋅c⋅ΔTq = m \cdot c \cdot \Delta T:

qsoln=(160.6 g)⋅(4.184Jg⋅∘C)⋅(2.15∘C)q_{\text{soln}} = (160.6\text{ g}) \cdot \left(4.184\frac{\text{J}}{\text{g}\cdot^{\circ}\text{C}}\right) \cdot (2.15^{\circ}\text{C})

qsoln≈1444.6 J=1.4446 kJq_{\text{soln}} \approx 1444.6\text{ J} = 1.4446\text{ kJ}


03

Determine the heat of reaction (qrxnq_{\text{rxn}})

By the conservation of energy in an insulated system of negligible heat capacity:

qrxn+qsoln=0  ⟹  qrxn=−qsoln=−1.4446 kJq_{\text{rxn}} + q_{\text{soln}} = 0 \implies q_{\text{rxn}} = -q_{\text{soln}} = -1.4446\text{ kJ}

The negative sign indicates that the dissolution process releases thermal energy to the surroundings (the water), meaning the process is exothermic.


04

Calculate the moles of solute and the molar enthalpy of solution (ΔHsoln\Delta H_{\text{soln}})

Find the amount of substance in moles for NaX2COX3\ce{Na2CO3}:

n=mM=10.6 g106.0 g/mol=0.100 moln = \frac{m}{M} = \frac{10.6\text{ g}}{106.0\text{ g/mol}} = 0.100\text{ mol}

Now, compute the molar enthalpy of solution:

ΔHsoln=qrxnn=−1.4446 kJ0.100 mol≈−14.5 kJ/mol\Delta H_{\text{soln}} = \frac{q_{\text{rxn}}}{n} = \frac{-1.4446\text{ kJ}}{0.100\text{ mol}} \approx -14.5\text{ kJ/mol}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to add the solute mass to the water mass, using only the mass of water (150.0 g) as the mass of the solution.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔT=23.65∘C−21.50∘C=2.15∘C\Delta T = 23.65^{\circ}\text{C} - 21.50^{\circ}\text{C} = 2.15^{\circ}\text{C}

  2. Step 2

    qsoln=150.0 g⋅4.184 J/(g⋅∘C)⋅2.15∘C=1349.3 J=1.3493 kJq_{\text{soln}} = 150.0\text{ g} \cdot 4.184\text{ J}/(\text{g}\cdot^{\circ}\text{C}) \cdot 2.15^{\circ}\text{C} = 1349.3\text{ J} = 1.3493\text{ kJ}

    Correct

    qsoln=(150.0 g+10.6 g)⋅4.184 J/(g⋅∘C)⋅2.15∘C=(160.6 g)⋅4.184 J/(g⋅∘C)⋅2.15∘C≈1444.6 J=1.4446 kJq_{\text{soln}} = (150.0\text{ g} + 10.6\text{ g}) \cdot 4.184\text{ J}/(\text{g}\cdot^{\circ}\text{C}) \cdot 2.15^{\circ}\text{C} = (160.6\text{ g}) \cdot 4.184\text{ J}/(\text{g}\cdot^{\circ}\text{C}) \cdot 2.15^{\circ}\text{C} \approx 1444.6\text{ J} = 1.4446\text{ kJ}

    You used only the solvent mass (150.0 g150.0\text{ g}) in q=mcΔTq = mc\Delta T. When a solid dissolves to form a homogeneous solution, the entire combined mass (mwater+msolute=160.6 gm_{\text{water}} + m_{\text{solute}} = 160.6\text{ g}) undergoes the temperature change.

  3. Step 3

    qrxn=−1.3493 kJq_{\text{rxn}} = -1.3493\text{ kJ}

    Correct

    qrxn=−qsoln=−1.4446 kJq_{\text{rxn}} = -q_{\text{soln}} = -1.4446\text{ kJ}

    Your sign convention qrxn=−qsolnq_{\text{rxn}} = -q_{\text{soln}} is completely correct, but the numerical value carries forward the error from Step 2.

  4. Step 4

    n=10.6 g/106.0 g/mol=0.100 moln = 10.6\text{ g} / 106.0\text{ g/mol} = 0.100\text{ mol}

  5. Step 5

    ΔHsoln=−1.3493 kJ/0.100 mol=−13.5 kJ/mol\Delta H_{\text{soln}} = -1.3493\text{ kJ} / 0.100\text{ mol} = -13.5\text{ kJ/mol}

    Correct

    ΔHsoln=−1.4446 kJ0.100 mol≈−14.5 kJ/mol\Delta H_{\text{soln}} = \frac{-1.4446\text{ kJ}}{0.100\text{ mol}} \approx -14.5\text{ kJ/mol}

    You correctly divided the reaction heat by the number of moles, but the final answer is shifted due to the mass omitted in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the temperature change of the mixture.

You properly applied the law of conservation of energy by assigning a negative sign to the exothermic dissolution (qrxn=−qsolnq_{\text{rxn}} = -q_{\text{soln}}).

You accurately converted grams of solute to moles using molar mass.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted solute mass in solution calorimetry

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the mass in q=mcΔTq = mc\Delta T as the mass of pure water instead of the combined mass of the resulting aqueous solution (msoln=mwater+msolutem_{\text{soln}} = m_{\text{water}} + m_{\text{solute}}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Define the heated mass in solution calorimetry
  • In coffee-cup calorimetry for dissolving a solid, mm represents the total mass of the solution: mtotal=msolvent+msolutem_{\text{total}} = m_{\text{solvent}} + m_{\text{solute}}.

  • Always add the solute mass to the solvent mass before substituting into q=mcΔTq = mc\Delta T unless the problem explicitly tells you to neglect the solute mass.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. msoln=150.0 g+10.6 g=160.6 gm_{\text{soln}} = 150.0\text{ g} + 10.6\text{ g} = 160.6\text{ g}

  2. qsoln=(160.6 g)⋅(4.184 J/(g⋅∘C))⋅(2.15∘C)=1444.6 J=1.4446 kJq_{\text{soln}} = (160.6\text{ g}) \cdot (4.184\text{ J}/(\text{g}\cdot^{\circ}\text{C})) \cdot (2.15^{\circ}\text{C}) = 1444.6\text{ J} = 1.4446\text{ kJ}

  3. qrxn=−qsoln=−1.4446 kJq_{\text{rxn}} = -q_{\text{soln}} = -1.4446\text{ kJ}

  4. ΔHsoln=−1.4446 kJ0.100 mol=−14.45 kJ/mol≈−14.5 kJ/mol\Delta H_{\text{soln}} = \frac{-1.4446\text{ kJ}}{0.100\text{ mol}} = -14.45\text{ kJ/mol} \approx -14.5\text{ kJ/mol}

Final answer

ΔHsoln=−14.5 kJ/mol\Delta H_{\text{soln}} = -14.5\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • In future solution calorimetry problems, write down mtotal=msolute+msolventm_{\text{total}} = m_{\text{solute}} + m_{\text{solvent}} explicitly as your very first step.

  • Check whether the problem asks for ΔHsoln\Delta H_{\text{soln}} per mole of solute or per mole of reaction, and ensure your final unit is in kJ/mol\text{kJ/mol} with the correct thermodynamic sign.

OverviewACEpath Teacher's Diagnosis

02 The student equates the enthalpy of reaction directly to the heat gained by the solution, omitting the negative sign for an exothermic dissolution process.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m=150.0 g+10.6 g=160.6 g  ⟹  ΔT=23.65∘C−21.50∘C=2.15∘Cm = 150.0\text{ g} + 10.6\text{ g} = 160.6\text{ g} \implies \Delta T = 23.65^{\circ}\text{C} - 21.50^{\circ}\text{C} = 2.15^{\circ}\text{C}

  2. Step 2

    q=160.6 g⋅4.184 J/(g⋅∘C)⋅2.15∘C=1444.6 J=1.445 kJq = 160.6\text{ g} \cdot 4.184\text{ J}/(\text{g}\cdot^{\circ}\text{C}) \cdot 2.15^{\circ}\text{C} = 1444.6\text{ J} = 1.445\text{ kJ}

  3. Step 3

    n=10.6 g106.0 g/mol=0.100 moln = \frac{10.6\text{ g}}{106.0\text{ g/mol}} = 0.100\text{ mol}

  4. Step 4

    ΔHsoln=+1.445 kJ0.100 mol=+14.4 kJ/mol\Delta H_{\text{soln}} = \frac{+1.445\text{ kJ}}{0.100\text{ mol}} = +14.4\text{ kJ/mol}

    Correct

    ΔHsoln=qrxnn=−qsolnn=−1.445 kJ0.100 mol=−14.5 kJ/mol\Delta H_{\text{soln}} = \frac{q_{\text{rxn}}}{n} = \frac{-q_{\text{soln}}}{n} = \frac{-1.445\text{ kJ}}{0.100\text{ mol}} = -14.5\text{ kJ/mol}

    The solution absorbed heat because the dissolution reaction released heat (qrxn=−qsolnq_{\text{rxn}} = -q_{\text{soln}}). An increase in temperature means the reaction is exothermic, so ΔHsoln\Delta H_{\text{soln}} must be negative.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly summed the solute and solvent masses to find the total solution mass.

You calculated the temperature change and the heat absorbed by the solution without arithmetic errors.

You correctly calculated the moles of dissolved solute.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Calorimetry System vs. Surroundings Sign Error

You equated the heat of reaction directly to the heat gained by the solution without switching the sign.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the system (the chemical dissolution process) with the surroundings (the aqueous solution). When the surroundings warm up (ΔT>0\Delta T > 0), qsoln>0q_{\text{soln}} > 0, which requires the chemical system to have lost that heat, so qrxn=−qsoln<0q_{\text{rxn}} = -q_{\text{soln}} < 0.

REASONING PATH
Your ACEpath teacher’s suggested approach
System vs. Surroundings Sign Check
  • In an insulated calorimeter, qsystem+qsurroundings=0q_{\text{system}} + q_{\text{surroundings}} = 0, meaning qrxn=−qsolnq_{\text{rxn}} = -q_{\text{soln}}.

  • Whenever the thermometer reading rises, immediately write down that the reaction is exothermic and that ΔH\Delta H must be negative.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Relate the heat of reaction to the heat absorbed by the solution: qrxn=−qsoln=−1.445 kJq_{\text{rxn}} = -q_{\text{soln}} = -1.445\text{ kJ}.

  2. Divide by the moles of solute to find the molar enthalpy: ΔHsoln=−1.445 kJ0.100 mol=−14.5 kJ/mol\Delta H_{\text{soln}} = \frac{-1.445\text{ kJ}}{0.100\text{ mol}} = -14.5\text{ kJ/mol}.

Final answer

ΔHsoln=−14.5 kJ/mol\Delta H_{\text{soln}} = -14.5\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between the system (bonds breaking and forming) and the surroundings (the water and dissolved ions being warmed).

  • Practice checking the physical meaning of your final sign: temperature increase   ⟹  \implies heat released to water   ⟹  ΔH<0\implies \Delta H < 0.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to convert the heat from joules to kilojoules, resulting in a molar enthalpy value that is off by a factor of 1000.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    m=150.0 g+10.6 g=160.6 g  ⟹  ΔT=23.65∘C−21.50∘C=2.15∘Cm = 150.0\text{ g} + 10.6\text{ g} = 160.6\text{ g} \implies \Delta T = 23.65^{\circ}\text{C} - 21.50^{\circ}\text{C} = 2.15^{\circ}\text{C}

  2. Step 2

    qsoln=160.6 g⋅4.184 J/(g⋅∘C)⋅2.15∘C=1444.6 J  ⟹  qrxn=−1444.6 Jq_{\text{soln}} = 160.6\text{ g} \cdot 4.184\text{ J}/(\text{g}\cdot^{\circ}\text{C}) \cdot 2.15^{\circ}\text{C} = 1444.6\text{ J} \implies q_{\text{rxn}} = -1444.6\text{ J}

  3. Step 3

    n=10.6 g106.0 g/mol=0.100 moln = \frac{10.6\text{ g}}{106.0\text{ g/mol}} = 0.100\text{ mol}

  4. Step 4

    ΔHsoln=−1444.6 J0.100 mol=−14446 kJ/mol\Delta H_{\text{soln}} = \frac{-1444.6\text{ J}}{0.100\text{ mol}} = -14446\text{ kJ/mol}

    Correct

    ΔHsoln=−1.4446 kJ0.100 mol=−14.45 kJ/mol≈−14.5 kJ/mol\Delta H_{\text{soln}} = \frac{-1.4446\text{ kJ}}{0.100\text{ mol}} = -14.45\text{ kJ/mol} \approx -14.5\text{ kJ/mol}

    You substituted the heat in joules (J\text{J}) but attached the unit kJ/mol\text{kJ/mol} directly to the quotient without dividing by 1000 J/kJ1000\text{ J/kJ}. Dividing −1444.6 J-1444.6\text{ J} by 0.100 mol0.100\text{ mol} yields −14446 J/mol-14446\text{ J/mol}, which equals −14.45 kJ/mol-14.45\text{ kJ/mol}.

WHAT YOU DID WELL
Compliments from Your Teacher

You included both the solute and solvent to find the correct total mass of the solution.

You correctly calculated the temperature increase of the water.

You properly applied the first law of thermodynamics to make qrxn=−qsolnq_{\text{rxn}} = -q_{\text{soln}}.

You accurately found the molar amount of solute using its molar mass.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit conversion omitted (J to kJ)

You performed −1444.60.100\frac{-1444.6}{0.100} and wrote the unit as kJ/mol\text{kJ/mol}, omitting the division by 10001000 needed to convert J\text{J} to kJ\text{kJ}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In calorimetry, the specific heat of water is given in J/(g⋅∘C)\text{J}/(\text{g}\cdot^{\circ}\text{C}), so q=mcΔTq = m c \Delta T naturally produces heat in joules (J\text{J}). Standard thermodynamic enthalpies (ΔH\Delta H) are almost universally reported in kilojoules per mole (kJ/mol\text{kJ/mol}). Tracking explicit units during the division prevents mismatched unit prefixes.

REASONING PATH
Your ACEpath teacher’s suggested approach
Convert heat to kilojoules before calculating enthalpy
  • 1 kJ=1000 J1\text{ kJ} = 1000\text{ J}, so qrxn(kJ)=qrxn(J)1000q_{\text{rxn}}(\text{kJ}) = \frac{q_{\text{rxn}}(\text{J})}{1000}.

  • Always convert your calculated qq from joules to kilojoules before dividing by the number of moles, or carry the unit explicitly: −1444.6 J0.100 mol×1 kJ1000 J=−14.5 kJ/mol\frac{-1444.6\text{ J}}{0.100\text{ mol}} \times \frac{1\text{ kJ}}{1000\text{ J}} = -14.5\text{ kJ/mol}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert heat from joules to kilojoules: qrxn=−1444.6 J1000 J/kJ=−1.4446 kJq_{\text{rxn}} = \frac{-1444.6\text{ J}}{1000\text{ J/kJ}} = -1.4446\text{ kJ}.

  2. Divide by the moles of solute: ΔHsoln=−1.4446 kJ0.100 mol=−14.446 kJ/mol\Delta H_{\text{soln}} = \frac{-1.4446\text{ kJ}}{0.100\text{ mol}} = -14.446\text{ kJ/mol}.

  3. Round to three significant figures: ΔHsoln≈−14.5 kJ/mol\Delta H_{\text{soln}} \approx -14.5\text{ kJ/mol}.

Final answer

ΔHsoln=−14.5 kJ/mol\Delta H_{\text{soln}} = -14.5\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the units inside your fractions so that Jmol\frac{\text{J}}{\text{mol}} is visually obvious before writing down kJ/mol\text{kJ/mol}.

  • Practice converting qsolnq_{\text{soln}} to kilojoules immediately after evaluating mcΔTm c \Delta T.

Lock it in

Similar question

01

A student dissolves 8.00 g8.00\text{ g} of ammonium nitrate (NHX4NOX3\ce{NH4NO3}, molar mass =80.05 g/mol= 80.05\text{ g/mol}) into 100.0 g100.0\text{ g} of water in a coffee-cup calorimeter. The temperature drops by 5.80∘C5.80^{\circ}\text{C}. Assuming c=4.184 J/(g⋅∘C)c = 4.184\text{ J}/(\text{g}\cdot^{\circ}\text{C}), calculate the molar enthalpy of solution ΔHsoln\Delta H_{\text{soln}} in kJ/mol\text{kJ/mol}.

Answer

ΔHsoln=+26.2 kJ/mol\Delta H_{\text{soln}} = +26.2\text{ kJ/mol}. Total mass m=100.0 g+8.00 g=108.0 gm = 100.0\text{ g} + 8.00\text{ g} = 108.0\text{ g}. Heat absorbed by surroundings: qsoln=(108.0 g)(4.184 J/(g⋅∘C))(−5.80∘C)=−2621 J=−2.621 kJq_{\text{soln}} = (108.0\text{ g})(4.184\text{ J}/(\text{g}\cdot^{\circ}\text{C}))(-5.80^{\circ}\text{C}) = -2621\text{ J} = -2.621\text{ kJ}. Thus, qrxn=+2.621 kJq_{\text{rxn}} = +2.621\text{ kJ}. Moles of solute: n=8.00 g/80.05 g/mol=0.09994 moln = 8.00\text{ g} / 80.05\text{ g/mol} = 0.09994\text{ mol}. Finally, ΔHsoln=+2.621 kJ/0.09994 mol=+26.2 kJ/mol\Delta H_{\text{soln}} = +2.621\text{ kJ} / 0.09994\text{ mol} = +26.2\text{ kJ/mol}.

02

A 4.00 g4.00\text{ g} pellet of sodium hydroxide (NaOH\ce{NaOH}, molar mass =40.00 g/mol= 40.00\text{ g/mol}) is placed in an insulated cup containing 120.0 g120.0\text{ g} of water at 22.0∘C22.0^{\circ}\text{C}. The dissolution is exothermic with ΔHsoln=−44.5 kJ/mol\Delta H_{\text{soln}} = -44.5\text{ kJ/mol}. What is the final temperature of the solution? (Assume c=4.184 J/(g⋅∘C)c = 4.184\text{ J}/(\text{g}\cdot^{\circ}\text{C})).

Answer

Tfinal=30.6∘CT_{\text{final}} = 30.6^{\circ}\text{C}. Moles of NaOH=4.00/40.00=0.100 mol\ce{NaOH} = 4.00 / 40.00 = 0.100\text{ mol}. Heat released by reaction: qrxn=(0.100 mol)(−44.5 kJ/mol)=−4.45 kJ=−4450 Jq_{\text{rxn}} = (0.100\text{ mol})(-44.5\text{ kJ/mol}) = -4.45\text{ kJ} = -4450\text{ J}. Therefore, qsoln=+4450 Jq_{\text{soln}} = +4450\text{ J}. Total solution mass: m=120.0 g+4.00 g=124.0 gm = 120.0\text{ g} + 4.00\text{ g} = 124.0\text{ g}. Solve for ΔT\Delta T: ΔT=4450/(124.0×4.184)≈8.58∘C\Delta T = 4450 / (124.0 \times 4.184) \approx 8.58^{\circ}\text{C}. Final temperature: Tfinal=22.0∘C+8.58∘C=30.58∘C≈30.6∘CT_{\text{final}} = 22.0^{\circ}\text{C} + 8.58^{\circ}\text{C} = 30.58^{\circ}\text{C} \approx 30.6^{\circ}\text{C}.

03

50.0 mL50.0\text{ mL} of 1.00 M HCl1.00\text{ M}\ \ce{HCl} is mixed with 50.0 mL50.0\text{ mL} of 1.00 M NaOH1.00\text{ M}\ \ce{NaOH} in a calorimeter, both initially at 21.0∘C21.0^{\circ}\text{C}. The neutralization raises the temperature to 27.7∘C27.7^{\circ}\text{C}. Assuming both solutions have a density of 1.00 g/mL1.00\text{ g/mL} and specific heat capacity of 4.184 J/(g⋅∘C)4.184\text{ J}/(\text{g}\cdot^{\circ}\text{C}), calculate the molar enthalpy of neutralization (kJ\text{kJ} per mole of HX2O\ce{H2O} formed).

Answer

ΔHneut=−56.1 kJ/mol\Delta H_{\text{neut}} = -56.1\text{ kJ/mol}. Combined mass of solution: m=(50.0+50.0) mL×1.00 g/mL=100.0 gm = (50.0 + 50.0)\text{ mL} \times 1.00\text{ g/mL} = 100.0\text{ g}. Temperature change: ΔT=27.7−21.0=6.7∘C\Delta T = 27.7 - 21.0 = 6.7^{\circ}\text{C}. Heat absorbed by solution: qsoln=(100.0 g)(4.184 J/(g⋅∘C))(6.7∘C)=2803 J=2.803 kJq_{\text{soln}} = (100.0\text{ g})(4.184\text{ J}/(\text{g}\cdot^{\circ}\text{C}))(6.7^{\circ}\text{C}) = 2803\text{ J} = 2.803\text{ kJ}. Thus, qrxn=−2.803 kJq_{\text{rxn}} = -2.803\text{ kJ}. Moles of water formed: n=0.0500 L×1.00 M=0.0500 moln = 0.0500\text{ L} \times 1.00\text{ M} = 0.0500\text{ mol}. Enthalpy: ΔHneut=−2.803 kJ/0.0500 mol=−56.1 kJ/mol\Delta H_{\text{neut}} = -2.803\text{ kJ} / 0.0500\text{ mol} = -56.1\text{ kJ/mol}.

Loading workspace…