Resources
A student predicts that placing an unbranched saturated fatty acid (e.g., palmitic acid, ) and an unbranched cis-monounsaturated fatty acid of identical chain length (e.g., palmitoleic acid, ) into separate beakers of water will result in the unsaturated fatty acid forming a more tightly packed, higher-melting crystalline bilayer because 'double bonds possess higher bond energies ( vs. ) and greater electron density, thereby pulling neighboring chains closer together.' (a) Refute this misconception by explaining the structural geometry imposed by a cis-double bond versus an all-trans saturated acyl chain. (b) Explain how this geometric disruption alters the distance-dependent London dispersion forces () between adjacent hydrocarbon tails. (c) Given that the melting point of palmitic acid is and palmitoleic acid is , calculate the magnitude of the freezing-point depression induced by introducing this single cis-unsaturation.
Answer and steps
Final answer
(a) A cis-double bond introduces a rigid kink in the hydrocarbon chain, preventing the straight, extended zig-zag conformation characteristic of saturated chains; (b) The kink increases the average intermolecular separation distance , causing a steep decrease in London dispersion attraction (proportional to ) and preventing tight crystalline van der Waals packing; (c)
Steps
(a) Structural Geometry: cis-Double Bond vs. All-trans Saturated Chain
- Saturated Acyl Chains (Palmitic Acid, ):
Every carbon-carbon bond in the hydrophobic tail is a single -bond () with free rotation. Thermodynamically, the chain adopts an extended, fully staggered, all-trans zig-zag conformation. This allows the molecule to maintain a linear, rod-like geometry. - Monounsaturated Acyl Chains (Palmitoleic Acid, ):
The introduction of a cis-double bond () locks the adjacent carbon segments on the same side of the double bond due to the lack of rotation about the -bond. This imparts a rigid kink (approximately a bend) in the hydrocarbon backbone, breaking the uniform rod-like symmetry. - Refutation:
Although an individual double bond has a higher bond energy () than a single bond (), bond energy measures the strength of intramolecular covalent bonds within a molecule, not intermolecular attractive forces between separate chains. The electron density within the double bond does not pull adjacent chains together; rather, the fixed spatial kink physically holds neighboring chains apart.
(b) Effect on London Dispersion Forces
- Distance Dependence of Dispersion Interactions:
Nonpolar hydrocarbon tails interact primarily via induced dipole–induced dipole attractions (London dispersion forces). The potential energy of these attractive interactions is extremely sensitive to the separation distance between interacting segments: where is an attraction coefficient. -
Impact of Chain Packing:
- The linear, rod-like chains of saturated palmitic acid align parallel to one another over their entire lengths, achieving a small average intermolecular separation and extensive contact surface area.
- The permanent kink in palmitoleic acid creates steric hindrance, preventing adjacent chains from aligning closely in an ordered crystalline lattice. Because the potential energy scales inversely with the sixth power of distance (), even a slight increase in average intermolecular distance causes a precipitous drop in the magnitude of London dispersion attraction.
- Consequently, significantly less thermal energy is required to disrupt the crystalline packing into a disordered liquid state.
(c) Calculation of the Melting-Point Depression ()
The melting point (or freezing point) of palmitic acid is , and the melting point of palmitoleic acid is .
The magnitude of the depression in melting point caused by introducing the single cis-double bond is:
A single cis-alkene kink lowers the transition temperature by , keeping the unsaturated fatty acid fluid at room temperature.
Typical errors
01 The student misinterprets the subtraction of a negative value when finding the magnitude of the difference, subtracting 0.5 instead of adding it.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Saturated chains are straight with an all-trans zigzag geometry. A cis-double bond introduces a rigid bend or kink that disrupts straight alignment.
- Step 2
The bend prevents tight packing and increases the distance between tails. Since dispersion forces scale as , increasing significantly reduces attractive intermolecular forces.
- Step 3Correct
You treated the melting point of palmitoleic acid as rather than . Subtracting a negative number is equivalent to adding its magnitude: .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly described the contrasting geometries of all-trans saturated chains and cis-kinked unsaturated chains.
You accurately identified the distance dependence of London dispersion forces and explained how poor packing weakens them.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou dropped the negative sign of the unsaturated fatty acid's melting point when setting up the subtraction.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou overlooked the negative sign on during subtraction, treating as .
REASONING PATH
Your ACEpath teacher’s suggested approach- Subtracting Negative Values
For any two values and , the difference .
Always enclose negative quantities in parentheses when substituting them into difference formulas, such as .
CORRECTED PATH
ACEpath Teacher's Demonstration02 The student confuses the effects of cis and trans isomerism on lipid packing, incorrectly claiming that cis-alkenes remain straight while trans-alkenes kink the chain.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Saturated chains have kinks, whereas a cis-double bond forces the chain into a straight, rigid linear rod. The straight geometry allows tighter crystalline packing for the cis-unsaturated acid.
CorrectSaturated chains adopt an extended, all-trans linear zig-zag conformation, whereas a cis-double bond introduces a rigid kink in the hydrocarbon tail that disrupts regular crystalline packing.
You inverted the shapes of the two chains: saturated acyl chains are fully extended and linear due to staggered single bonds, whereas a cis-alkene locks adjacent carbon segments on the same side, creating a permanent kink.
- Step 2
Because the cis chain is straight, the distance between chains decreases. As decreases, the dispersion forces become much stronger between the chains.
CorrectBecause the cis kink prevents close alignment, the average intermolecular separation distance increases, causing a sharp drop in London dispersion attraction ().
Your understanding of the relationship is mathematically sound, but because you assumed the cis chain was straight, you concluded that decreases rather than increases.
- Step 3
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the magnitude of the freezing-point depression as .
You correctly recognized that London dispersion forces depend inversely on the sixth power of distance ().
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNo slip was detected; this is a conceptual confusion between the shapes of saturated and cis-unsaturated hydrocarbon chains.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the structural consequences of cis unsaturation with saturated single-bond geometry, mistakenly associating cis double bonds with linear rods and saturated chains with kinks.
REASONING PATH
Your ACEpath teacher’s suggested approach- Conformation of Saturated Chains
In an unbranched saturated fatty acid, every bond is a single -bond. To minimize steric clash, the carbons adopt a fully staggered, all-trans zig-zag conformation that is overall linear and rod-like.
Draw saturated chains as straight, extended zig-zag lines that pack neatly side by side.
- Geometry of cis- vs. trans-Alkenes
A cis-double bond places both continuing chain segments on the same side of the double bond, creating an inflexible bend (kink). Only trans-double bonds maintain an approximately straight zig-zag path.
Whenever you see a cis double bond, introduce a distinct bend in the carbon backbone that pushes neighboring chains apart.
CORRECTED PATH
ACEpath Teacher's DemonstrationRecall that an all-trans saturated acyl chain is linear, allowing adjacent chains to pack tightly with a small intermolecular distance .
Recognize that a cis-double bond introduces a rigid bend (kink) that acts as a steric wedge, increasing the average separation distance .
Apply : an increase in dramatically weakens London dispersion forces, explaining why palmitoleic acid melts at a much lower temperature () than palmitic acid ().
(a) Saturated chains are extended and linear, while a cis-double bond creates a rigid kink; (b) The kink increases , greatly reducing ; (c)
03 The student erroneously concludes that the 1/r⁶ dependence means dispersion forces increase when intermolecular distance increases.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
a) Saturated acyl chains are fully extended and linear. A cis-double bond introduces a rigid kink that bends the chain.
- Step 2
b) The kink forces adjacent chains farther apart, increasing the separation distance . Because dispersion energy scales with , increasing makes London dispersion forces stronger and stabilizes the bilayer.
CorrectBecause the attractive dispersion potential scales inversely with distance (), an increase in intermolecular separation causes a steep decline in the magnitude of London dispersion attractions, destabilizing crystalline packing.
You correctly noted that the kink increases the average distance , but because dispersion attraction depends inversely on distance (), increasing sharply reduces the attractive force between chains rather than strengthening it.
- Step 3
c)
WHAT YOU DID WELL
Compliments from Your TeacherYou clearly explained how a cis-alkene creates a rigid kink compared to an all-trans linear chain.
You recognized that steric hindrance from the kink increases the average separation distance between adjacent tails.
You accurately calculated the change in melting temperature.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated an inverse-power function () as if the attractive interaction scaled directly with .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing inverse proportionalities with direct proportionalities: when distance appears in the denominator (), an increase in leads to a rapid decrease in the interaction energy magnitude, weakening intermolecular adhesion.
REASONING PATH
Your ACEpath teacher’s suggested approach- Evaluate Denominators in Distance Laws
For any interaction potential where energy magnitude (), as separation increases, the magnitude of attraction approaches zero.
Always check whether distance is in the numerator or denominator: larger makes the fraction smaller, meaning weaker attraction.
CORRECTED PATH
ACEpath Teacher's DemonstrationThe potential energy of London dispersion attraction scales as .
As separation distance increases, the term decreases precipitously toward zero.
Therefore, greater distance weakens intermolecular dispersion attractions and destabilizes crystalline bilayer packing, lowering the melting point.
Increasing separation drastically weakens London dispersion forces due to the inverse sixth-power dependence (), destabilizing the bilayer.
Lock it in
How do you evaluate the difference when is a negative value?
Substitute with parentheses: . Subtracting a negative temperature increases the total temperature span.
Similar question
Stearic acid () has a melting point of , whereas oleic acid () has a melting point of . Calculate the magnitude of the melting-point depression caused by the single cis-double bond.
Answer
.
Elaidic acid () melts at , whereas oleic acid () melts at . (a) Calculate the difference in melting points . (b) Briefly explain why the trans-isomer has a substantially higher melting point than the cis-isomer.
Answer
(a) . (b) A trans-double bond maintains an extended, nearly linear chain geometry without a major kink, allowing adjacent chains to pack tightly and maximize London dispersion forces, unlike the permanently kinked cis-isomer.
Linoleic acid () contains two cis-double bonds and melts at . Using the melting point of stearic acid (, ), calculate the melting-point depression induced by these two unsaturations, paying careful attention to sign conventions.
Answer
.