Resources
In an analytical chemistry laboratory, a student performs a flame atomic emission spectroscopy experiment to determine the concentration of sodium in a sports rehydration drink. The emission intensity of the characteristic sodium doublet at is measured. Five calibration standards yield the following linear regression equation for emission intensity: , where is in milligrams per liter () and is in arbitrary detector units (). (a) If a aliquot of the sports drink is diluted to a total volume of in a volumetric flask and produces a detector intensity of , calculate the concentration of in the original undiluted drink in and in molarity (, molar mass of ). (b) Calculate the energy of a single mole of photons emitted at in .
Answer and steps
Final answer
(a) Diluted concentration ; Original concentration ; (b) Molar photon energy .
Steps
Calculate the Concentration of the Diluted Sample
Part (a): Determining the Concentration of in the Sports Drink
The linear calibration relationship between emission intensity () and concentration () is given by:
Substitute the measured intensity of the diluted solution ():
Subtract the intercept from both sides:
Solve for :
Account for the Dilution Factor
The sports drink was prepared by taking an aliquot volume of and diluting it to a final volume of .
Using the dilution relation :
Multiply the diluted concentration by the dilution factor:
Common Pitfall: Forgetting to scale back up by the dilution factor is a frequent error. Atomic spectroscopy instruments often require dilution to keep analyte responses within the linear dynamic range of the calibration curve, but the final answer must reflect the original sample.
Convert Concentration to Molarity
To convert the concentration from to molarity ():
- Convert milligrams per liter to grams per liter:
- Divide by the molar mass of sodium ():
Part (b): Calculating the Energy of One Mole of Emitted Photons
Energy of a Single Photon
The energy of a single photon is related to its wavelength by the Planck-Einstein relation:
Where:
- Planck's constant,
- Speed of light,
- Wavelength,
Substitute these values:
Energy of One Mole of Photons
Multiply the single-photon energy by Avogadro's number () to find the molar energy:
Convert from to :
Typical errors
01 The student forgets to account for the 20-fold dilution factor when calculating the original drink concentration.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You used the diluted sample concentration directly as the drink's concentration. Because a aliquot was diluted to , you need to multiply by the dilution factor to obtain the undiluted concentration () before finding molarity.
- Step 3
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly isolated the analyte concentration from the linear calibration curve.
You carried out the unit conversion from to using dimensional analysis.
You correctly applied Planck's equation and Avogadro's constant to determine the molar photon energy.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated the concentration obtained from the calibration curve as the concentration of the original sample, overlooking the dilution performed before measurement.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating the concentration of the prepared measurement cuvette/flask with the original stock concentration when sample preparation involves an aliquot dilution.
REASONING PATH
Your ACEpath teacher’s suggested approach- Dilution Tracking
Whenever a procedure states that an aliquot is diluted to a larger volume before spectroscopy, immediately label the result from the calibration curve as and multiply by the dilution factor.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the dilution factor: .
Find the undiluted concentration: .
Convert to molarity: .
(a) ; (b)
02 The student forgets to convert the wavelength from nanometers to meters, introducing an error of 10⁹ in the photon energy calculation.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4Correct
You used the wavelength in nanometers () without converting it to meters (), which made your single-photon energy too small by a factor of .
- Step 5Correct
Your method of multiplying by Avogadro's number and dividing by to get was correct, but the numerical value was affected by the unscaled wavelength in the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou accurately solved the linear calibration equation for the diluted analyte concentration.
You correctly accounted for the volumetric dilution factor to find the original concentration.
You converted to molarity with proper dimensional analysis.
You used the correct relationship between single-photon energy, Avogadro's number, and molar energy.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted directly instead of converting from nanometers to meters ().
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking unit compatibility in the equation . Because the speed of light is expressed in meters per second (), the wavelength must be in standard SI base units () so that length units cancel cleanly.
REASONING PATH
Your ACEpath teacher’s suggested approach- SI Unit Matching in Planck's Equation
In , is in , so must always be converted to meters: .
Whenever a wavelength is given in , immediately rewrite it as before entering it into your calculator.
- Sanity Check for Visible Photon Energy
Visible light photons typically carry each, and one mole of visible photons carries between and .
If your calculated molar energy is an extremely tiny fraction (like ), check if you forgot the factor in the denominator.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert the emission wavelength to meters: .
Calculate the energy of a single photon: .
Multiply by Avogadro's constant and convert to kilojoules: .
(a) ; (b)
03 The student calculates the energy of a single photon but forgets to multiply by Avogadro's number to find the energy per mole.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4
- Step 5Correct
You converted the energy of a single photon from joules to kilojoules, but labeled the result as without multiplying by Avogadro's number ().
WHAT YOU DID WELL
Compliments from Your TeacherYou used the calibration regression line accurately to determine the diluted sample concentration.
You accounted for the dilution factor and converted the mass concentration into molarity using the molar mass.
You correctly used Planck's equation to calculate the single-photon energy in joules.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou divided by to convert joules to kilojoules, but overlooked scaling from an individual photon to a full mole of photons.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisThe formula yields the energy of a single microscopic photon (). To obtain macroscopic molar energy ( or ), that value must be scaled by Avogadro's constant ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Scale Check: Single Photon vs. Mole of Photons
Planck's relation gives energy per single photon; 1 mole contains photons.
Always multiply by when a question asks for energy in or .
- Magnitude Reality Check
Visible light transitions have molar energies on the order of , not .
If your molar energy has an exponent near , check whether you forgot to multiply by Avogadro's number.
CORRECTED PATH
ACEpath Teacher's DemonstrationMultiply single-photon energy by Avogadro's constant: .
Convert joules per mole to kilojoules per mole: .
Lock it in
In analytical spectroscopy, if an instrument reads a diluted solution's concentration as , how do you find the original sample concentration ?
, where . Diluted solutions are less concentrated, so you must scale up.
Similar question
A sample of river water is diluted to in a volumetric flask. The potassium concentration in this diluted solution is measured by flame photometry and found to be . Calculate the concentration of potassium in the original river water in .
Answer
. Key step: ; .
A calcium standard curve gives absorbance with in (). A aliquot of milk is treated and diluted to , yielding an absorbance of . Calculate the calcium concentration in the original milk in and in molarity (, molar mass of ).
Answer
and . Key steps: ; ; ; .
In an emission spectroscopy analysis of lithium (), a medication tablet is dissolved to . A portion is diluted to , and its emission intensity gives . (a) Find the total mass of lithium in the tablet in milligrams. (b) Calculate the energy of one mole of photons emitted at in .
Answer
(a) ; (b) . Key steps: ; ; . For photons: ; .