Resources

A strip of polished zinc metal is submerged into a 0.100 M0.100\text{ M} aqueous solution of copper(II) sulfate, CuSO4(aq)\text{CuSO}_4\text{(aq)}. Standard reduction potentials are given as: E∘(Zn2+/Zn)=−0.76 VE^\circ(\text{Zn}^{2+}/\text{Zn}) = -0.76\text{ V} and E∘(Cu2+/Cu)=+0.34 VE^\circ(\text{Cu}^{2+}/\text{Cu}) = +0.34\text{ V}. Predict whether a spontaneous single-displacement reaction occurs under standard conditions, write the balanced net ionic equation, and calculate the standard cell potential (Ecell∘E^\circ_\text{cell}) for the reaction.

Answer and steps

Final answer

Yes, a spontaneous reaction occurs; Zn(s)+Cu2+(aq)→Zn2+(aq)+Cu(s)\text{Zn(s)} + \text{Cu}^{2+}\text{(aq)} \rightarrow \text{Zn}^{2+}\text{(aq)} + \text{Cu(s)}; Ecell∘=+1.10 VE^\circ_\text{cell} = +1.10\text{ V}

Steps

01

Identify the Relevant Half-Reactions and Potentials

Standard reduction potentials measure the tendency of a chemical species to acquire electrons and be reduced:

  • Reduction of copper(II) ions: CuX2+(aq)+2 eX−→Cu(s)E∘=+0.34 V\ce{Cu^{2+}(aq) + 2e^- -> Cu(s)} \quad E^\circ = +0.34\text{ V}
  • Reduction of zinc ions: ZnX2+(aq)+2 eX−→Zn(s)E∘=−0.76 V\ce{Zn^{2+}(aq) + 2e^- -> Zn(s)} \quad E^\circ = -0.76\text{ V}

A higher (more positive) reduction potential indicates a stronger tendency to undergo reduction (act as an oxidizing agent). Since E∘(CuX2+/Cu)>E∘(ZnX2+/Zn)E^\circ(\ce{Cu^{2+}/Cu}) > E^\circ(\ce{Zn^{2+}/Zn}), CuX2+(aq)\ce{Cu^{2+}(aq)} is more easily reduced than ZnX2+(aq)\ce{Zn^{2+}(aq)}. Therefore, CuX2+\ce{Cu^{2+}} acts as the cathode (reduction), while solid zinc (Zn\ce{Zn}) acts as the anode (oxidation).


02

Formulate the Net Ionic Equation

  • Reduction (Cathode): CuX2+(aq)+2 eX−→Cu(s)\ce{Cu^{2+}(aq) + 2e^- -> Cu(s)}
  • Oxidation (Anode): Reverse the zinc reduction half-reaction: Zn(s)→ZnX2+(aq)+2 eX−\ce{Zn(s) -> Zn^{2+}(aq) + 2e^-}

Adding both half-reactions cancels out the 2e−2\text{e}^-, giving the balanced net ionic equation: Zn(s)+CuX2+(aq)→ZnX2+(aq)+Cu(s)\ce{Zn(s) + Cu^{2+}(aq) -> Zn^{2+}(aq) + Cu(s)}


03

Calculate the Standard Cell Potential (Ecell∘E^\circ_\text{cell})

The standard cell potential is calculated using: Ecell∘=Ecathode∘−Eanode∘E^\circ_\text{cell} = E^\circ_\text{cathode} - E^\circ_\text{anode}

Substitute the standard reduction potentials: Ecell∘=(+0.34 V)−(−0.76 V)=+0.34 V+0.76 V=+1.10 VE^\circ_\text{cell} = (+0.34\text{ V}) - (-0.76\text{ V}) = +0.34\text{ V} + 0.76\text{ V} = +1.10\text{ V}


04

Determine Spontaneity

A redox process is thermodynamically spontaneous under standard conditions when Ecell∘>0E^\circ_\text{cell} > 0 (which corresponds to ΔG∘<0\Delta G^\circ < 0 via ΔG∘=−nFEcell∘\Delta G^\circ = -nFE^\circ_\text{cell}).

Since Ecell∘=+1.10 V>0E^\circ_\text{cell} = +1.10\text{ V} > 0, the forward single-displacement reaction occurs spontaneously.

Pitfall to Avoid: When reversing the anode half-reaction to show oxidation, do not change the sign of E∘E^\circ if you are using the standard formula Ecell∘=Ecathode∘−Eanode∘E^\circ_\text{cell} = E^\circ_\text{cathode} - E^\circ_\text{anode}. That subtraction already accounts for the reversal of the oxidation half-cell.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student subtracts the reduction potential of the cathode from the anode, yielding a negative cell potential and concluding the reaction is nonspontaneous.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Cu2+ is reduced and Zn is oxidized, so the reaction is spontaneous.\text{Cu}^{2+}\text{ is reduced and }\text{Zn}\text{ is oxidized, so the reaction is spontaneous.}

  2. Step 2

    Zn(s)+Cu2+(aq)→Zn2+(aq)+Cu(s)\text{Zn(s)} + \text{Cu}^{2+}\text{(aq)} \rightarrow \text{Zn}^{2+}\text{(aq)} + \text{Cu(s)}

  3. Step 3

    E∘cell=E∘(anode)−E∘(cathode)  ⟹  E∘cell=−0.76 V−0.34 V=−1.10 VE^\circ\text{cell} = E^\circ(\text{anode}) - E^\circ(\text{cathode}) \implies E^\circ\text{cell} = -0.76\text{ V} - 0.34\text{ V} = -1.10\text{ V}

    Correct

    Ecell∘=E∘(cathode)−E∘(anode)=+0.34 V−(−0.76 V)=+1.10 VE^\circ_\text{cell} = E^\circ(\text{cathode}) - E^\circ(\text{anode}) = +0.34\text{ V} - (-0.76\text{ V}) = +1.10\text{ V}

    When using standard reduction potentials, the cell potential is calculated as Ecell∘=E∘(cathode)−E∘(anode)E^\circ_\text{cell} = E^\circ(\text{cathode}) - E^\circ(\text{anode}). Subtracting the cathode reduction potential from the anode gives the opposite sign and contradicts your conclusion that the reaction is spontaneous.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that Cu2+\text{Cu}^{2+} is reduced and solid Zn\text{Zn} is oxidized.

You formulated the correct, balanced net ionic equation.

You correctly predicted that a spontaneous single-displacement reaction occurs.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted cell potential formula

None.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You subtracted the cathode reduction potential from the anode reduction potential (Eanode∘−Ecathode∘E^\circ_\text{anode} - E^\circ_\text{cathode}) rather than computing Ecathode∘−Eanode∘E^\circ_\text{cathode} - E^\circ_\text{anode}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Standard Cell Potential Formula
  • Using standard reduction potentials: Ecell∘=Ecathode∘−Eanode∘E^\circ_\text{cell} = E^\circ_\text{cathode} - E^\circ_\text{anode}.

  • Identify the reduction site (cathode) and the oxidation site (anode), then subtract the anode potential from the cathode potential.

Spontaneity Consistency Check
  • A spontaneous reaction under standard conditions must have Ecell∘>0E^\circ_\text{cell} > 0 (corresponding to ΔG∘<0\Delta G^\circ < 0).

  • If you predict a spontaneous forward reaction, ensure your calculated Ecell∘E^\circ_\text{cell} is positive.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the cathode (reduction): Cu2+(aq)+2e−→Cu(s)\text{Cu}^{2+}\text{(aq)} + 2\text{e}^- \rightarrow \text{Cu(s)} with Ered∘(cathode)=+0.34 VE^\circ_\text{red}(\text{cathode}) = +0.34\text{ V}.

  2. Identify the anode (oxidation): Zn(s)→Zn2+(aq)+2e−\text{Zn(s)} \rightarrow \text{Zn}^{2+}\text{(aq)} + 2\text{e}^- with Ered∘(anode)=−0.76 VE^\circ_\text{red}(\text{anode}) = -0.76\text{ V}.

  3. Apply the formula: Ecell∘=Ecathode∘−Eanode∘=(+0.34 V)−(−0.76 V)=+1.10 VE^\circ_\text{cell} = E^\circ_\text{cathode} - E^\circ_\text{anode} = (+0.34\text{ V}) - (-0.76\text{ V}) = +1.10\text{ V}.

Final answer

Yes, a spontaneous reaction occurs; Zn(s)+Cu2+(aq)→Zn2+(aq)+Cu(s)\text{Zn(s)} + \text{Cu}^{2+}\text{(aq)} \rightarrow \text{Zn}^{2+}\text{(aq)} + \text{Cu(s)}; Ecell∘=+1.10 VE^\circ_\text{cell} = +1.10\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the mnemonic 'Cathode minus Anode' (Ecell∘=Ecat∘−Ean∘E^\circ_\text{cell} = E^\circ_\text{cat} - E^\circ_\text{an}).

  • Check that your calculated Ecell∘E^\circ_\text{cell} sign matches your spontaneity prediction (Ecell∘>0E^\circ_\text{cell} > 0 for spontaneous reactions).

OverviewACEpath Teacher's Diagnosis

02 The student manually inverts the sign of the oxidation potential and then also subtracts it in the cell potential formula, resulting in a standard cell potential of -0.42 V.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Cu2+\text{Cu}^{2+} has a higher reduction potential, so spontaneous displacement occurs.

  2. Step 2

    Zn(s)+Cu2+(aq)→Zn2+(aq)+Cu(s)\text{Zn(s)} + \text{Cu}^{2+}\text{(aq)} \rightarrow \text{Zn}^{2+}\text{(aq)} + \text{Cu(s)}

  3. Step 3

    Eox∘(Zn)=+0.76 V  ⟹  Ecell∘=Ered∘−Eox∘=0.34 V−0.76 V=−0.42 VE^\circ_\text{ox}(\text{Zn}) = +0.76\text{ V} \implies E^\circ_\text{cell} = E^\circ_\text{red} - E^\circ_\text{ox} = 0.34\text{ V} - 0.76\text{ V} = -0.42\text{ V}

    Correct

    Ecell∘=Ecathode∘−Eanode∘=0.34 V−(−0.76 V)=+1.10 VE^\circ_\text{cell} = E^\circ_\text{cathode} - E^\circ_\text{anode} = 0.34\text{ V} - (-0.76\text{ V}) = +1.10\text{ V} (or Ecell∘=Ered∘+Eox∘=0.34 V+0.76 V=+1.10 VE^\circ_\text{cell} = E^\circ_\text{red} + E^\circ_\text{ox} = 0.34\text{ V} + 0.76\text{ V} = +1.10\text{ V})

    You reversed the sign of the zinc reduction potential to define an oxidation potential (Eox∘=+0.76 VE^\circ_\text{ox} = +0.76\text{ V}), but then subtracted it instead of adding it. If you use standard reduction potentials, use Ecell∘=Ecathode∘−Eanode∘E^\circ_\text{cell} = E^\circ_\text{cathode} - E^\circ_\text{anode}. If you convert to an oxidation potential, use Ecell∘=Ered∘+Eox∘E^\circ_\text{cell} = E^\circ_\text{red} + E^\circ_\text{ox}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly compared the reduction potentials to identify that Cu2+\text{Cu}^{2+} is reduced and Zn\text{Zn} is oxidized.

You correctly constructed the balanced net ionic equation with accurate phase labels.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Double Sign Inversion in Cell Potential Calculation

You knew zinc undergoes oxidation, but you inverted the sign of E∘E^\circ twice: once by defining Eox∘=−Ered∘=+0.76 VE^\circ_\text{ox} = -E^\circ_\text{red} = +0.76\text{ V}, and a second time by using a minus sign in the formula Ered∘−Eox∘E^\circ_\text{red} - E^\circ_\text{ox}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the two standard conventions for calculating cell potential: the subtraction method using only reduction potentials (Ecell∘=Ecathode∘−Eanode∘E^\circ_\text{cell} = E^\circ_\text{cathode} - E^\circ_\text{anode}) versus the additive method using an explicit oxidation potential (Ecell∘=Ereduction∘+Eoxidation∘E^\circ_\text{cell} = E^\circ_\text{reduction} + E^\circ_\text{oxidation}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Choose One Cell Potential Convention
  • Method A (Standard convention): Ecell∘=Ecathode∘−Eanode∘E^\circ_\text{cell} = E^\circ_\text{cathode} - E^\circ_\text{anode}, where both potentials are taken directly from the reduction table without changing signs. Method B: Ecell∘=Ered∘+Eox∘E^\circ_\text{cell} = E^\circ_\text{red} + E^\circ_\text{ox}, where Eox∘=−Ered(anode)∘E^\circ_\text{ox} = -E^\circ_\text{red(anode)}.

  • Never mix the minus sign from Method A with the flipped sign from Method B.

Spontaneity Sanity Check
  • A reaction predicted to be thermodynamically spontaneous must yield Ecell∘>0E^\circ_\text{cell} > 0.

  • If your earlier qualitative deduction says the reaction is spontaneous, a negative calculated Ecell∘E^\circ_\text{cell} indicates an algebraic sign error.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify cathode (reduction): Cu2++2e−→Cu\text{Cu}^{2+} + 2\text{e}^- \rightarrow \text{Cu}, Ecathode∘=+0.34 VE^\circ_\text{cathode} = +0.34\text{ V}.

  2. Identify anode (oxidation): Zn→Zn2++2e−\text{Zn} \rightarrow \text{Zn}^{2+} + 2\text{e}^-, Eanode∘=−0.76 VE^\circ_\text{anode} = -0.76\text{ V} (reduction potential).

  3. Apply the standard formula: Ecell∘=Ecathode∘−Eanode∘=(+0.34 V)−(−0.76 V)=+1.10 VE^\circ_\text{cell} = E^\circ_\text{cathode} - E^\circ_\text{anode} = (+0.34\text{ V}) - (-0.76\text{ V}) = +1.10\text{ V}.

Final answer

Yes, spontaneous; Zn(s)+Cu2+(aq)→Zn2+(aq)+Cu(s)\text{Zn(s)} + \text{Cu}^{2+}\text{(aq)} \rightarrow \text{Zn}^{2+}\text{(aq)} + \text{Cu(s)}; Ecell∘=+1.10 VE^\circ_\text{cell} = +1.10\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Stick strictly to Ecell∘=Ecathode∘−Eanode∘E^\circ_\text{cell} = E^\circ_\text{cathode} - E^\circ_\text{anode} by reading reduction potentials directly from the table without manually altering their signs.

  • Perform a sanity check comparing the sign of Ecell∘E^\circ_\text{cell} with your qualitative prediction of spontaneity.

OverviewACEpath Teacher's Diagnosis

03 The student writes a full molecular or spectator-containing equation instead of omitting spectator ions to give the net ionic equation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Yes, spontaneous reaction occurs because Cu2+ is reduced more readily than Zn2+.\text{Yes, spontaneous reaction occurs because }\text{Cu}^{2+}\text{ is reduced more readily than }\text{Zn}^{2+}\text{.}

  2. Step 2

    Zn(s)→CuSO4(aq)+ZnSO4(aq)+Cu(s)\text{Zn(s)} \rightarrow \text{CuSO}_4\text{(aq)} + \text{ZnSO}_4\text{(aq)} + \text{Cu(s)}

    Correct

    Zn(s)+Cu2+(aq)→Zn2+(aq)+Cu(s)\text{Zn(s)} + \text{Cu}^{2+}\text{(aq)} \rightarrow \text{Zn}^{2+}\text{(aq)} + \text{Cu(s)}

    You attempted to write a molecular equation and included the spectator sulfate ion (SO42−\text{SO}_4^{2-}), leaving the chemical equation unbalanced. For a net ionic equation, soluble strong electrolytes must be dissociated into their ions and all unchanged spectator ions must be eliminated.

  3. Step 3

    Ecell∘=0.34 V−(−0.76 V)=+1.10 VE^\circ_\text{cell} = 0.34\text{ V} - (-0.76\text{ V}) = +1.10\text{ V}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that Cu2+\text{Cu}^{2+} is more easily reduced than Zn2+\text{Zn}^{2+} because of its higher standard reduction potential.

You accurately calculated the cell potential using Ecell∘=Ecathode∘−Eanode∘=+1.10 VE^\circ_\text{cell} = E^\circ_\text{cathode} - E^\circ_\text{anode} = +1.10\text{ V}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Included spectator ions instead of writing net ionic equation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused a molecular equation with a net ionic equation and retained spectator sulfate ions (SO42−\text{SO}_4^{2-}) rather than canceling species that do not undergo a change in oxidation state.

REASONING PATH
Your ACEpath teacher’s suggested approach
Net Ionic Equation vs. Molecular Equation
  • A net ionic equation shows only the chemical species directly participating in the chemical change (bonds broken/formed or electrons transferred); spectator ions that remain identical on both sides must be cancelled out.

  • Separate soluble ionic compounds into their constituent ions, inspect for identical ions on both the reactant and product sides, and cancel them to leave only the actively reacting species.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the complete ionic equation by dissociating all aqueous strong electrolytes: Zn(s)+Cu2+(aq)+SO42−(aq)→Zn2+(aq)+SO42−(aq)+Cu(s)\text{Zn(s)} + \text{Cu}^{2+}\text{(aq)} + \text{SO}_4^{2-}\text{(aq)} \rightarrow \text{Zn}^{2+}\text{(aq)} + \text{SO}_4^{2-}\text{(aq)} + \text{Cu(s)}

  2. Identify and eliminate the spectator ion, SO42−(aq)\text{SO}_4^{2-}\text{(aq)}, which appears unchanged on both sides of the reaction.

  3. Combine the remaining oxidation and reduction half-reactions into the final net ionic equation: Zn(s)+Cu2+(aq)→Zn2+(aq)+Cu(s)\text{Zn(s)} + \text{Cu}^{2+}\text{(aq)} \rightarrow \text{Zn}^{2+}\text{(aq)} + \text{Cu(s)}

Final answer

Yes, a spontaneous reaction occurs; Zn(s)+Cu2+(aq)→Zn2+(aq)+Cu(s)\text{Zn(s)} + \text{Cu}^{2+}\text{(aq)} \rightarrow \text{Zn}^{2+}\text{(aq)} + \text{Cu(s)}; Ecell∘=+1.10 VE^\circ_\text{cell} = +1.10\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the rules for converting complete molecular equations into complete ionic and net ionic equations.

  • Practice splitting soluble aqueous salts into ions and identifying spectator ions in single-displacement redox reactions.

Lock it in

Similar question

01

A piece of nickel is placed into an aqueous solution containing silver ions. Given E∘(Ag+/Ag)=+0.80 VE^\circ(\text{Ag}^+/\text{Ag}) = +0.80\text{ V} and E∘(Ni2+/Ni)=−0.26 VE^\circ(\text{Ni}^{2+}/\text{Ni}) = -0.26\text{ V}, write the balanced net ionic equation and calculate Ecell∘E^\circ_\text{cell}.

Answer

Equation: Ni(s)+2Ag+(aq)→Ni2+(aq)+2Ag(s)\text{Ni(s)} + 2\text{Ag}^+\text{(aq)} \rightarrow \text{Ni}^{2+}\text{(aq)} + 2\text{Ag(s)}; Ecell∘=Ecathode∘−Eanode∘=(+0.80 V)−(−0.26 V)=+1.06 VE^\circ_\text{cell} = E^\circ_\text{cathode} - E^\circ_\text{anode} = (+0.80\text{ V}) - (-0.26\text{ V}) = +1.06\text{ V}.

02

An electrochemical cell is constructed from magnesium and lead half-cells with standard reduction potentials E∘(Mg2+/Mg)=−2.37 VE^\circ(\text{Mg}^{2+}/\text{Mg}) = -2.37\text{ V} and E∘(Pb2+/Pb)=−0.13 VE^\circ(\text{Pb}^{2+}/\text{Pb}) = -0.13\text{ V}. Identify the cathode and anode for a spontaneous cell, and compute Ecell∘E^\circ_\text{cell}.

Answer

Cathode: Pb2+/Pb\text{Pb}^{2+}/\text{Pb} (higher reduction potential, −0.13 V-0.13\text{ V}); Anode: Mg2+/Mg\text{Mg}^{2+}/\text{Mg} (more negative, −2.37 V-2.37\text{ V}); Ecell∘=(−0.13 V)−(−2.37 V)=+2.24 VE^\circ_\text{cell} = (-0.13\text{ V}) - (-2.37\text{ V}) = +2.24\text{ V}.

03

Solid copper is added to an aqueous solution of iron(II) sulfate. Given E∘(Cu2+/Cu)=+0.34 VE^\circ(\text{Cu}^{2+}/\text{Cu}) = +0.34\text{ V} and E∘(Fe2+/Fe)=−0.44 VE^\circ(\text{Fe}^{2+}/\text{Fe}) = -0.44\text{ V}, calculate the standard cell potential for the reaction Cu(s)+Fe2+(aq)→Cu2+(aq)+Fe(s)\text{Cu(s)} + \text{Fe}^{2+}\text{(aq)} \rightarrow \text{Cu}^{2+}\text{(aq)} + \text{Fe(s)} and state whether the reaction is spontaneous under standard conditions.

Answer

For this equation, Fe2+\text{Fe}^{2+} is reduced (cathode, −0.44 V-0.44\text{ V}) and Cu\text{Cu} is oxidized (anode, +0.34 V+0.34\text{ V}); Ecell∘=(−0.44 V)−(+0.34 V)=−0.78 VE^\circ_\text{cell} = (-0.44\text{ V}) - (+0.34\text{ V}) = -0.78\text{ V}. Because Ecell∘<0E^\circ_\text{cell} < 0, the reaction is nonspontaneous under standard conditions.

Loading workspace…