Resources

A linear synthetic poly(ethylene glycol) (PEG) polymer sample has a degree of polymerization nn approaching very high values, defined by the formula H−(O−CH2−CH2)n−OH\text{H}-(\text{O}-\text{CH}_2-\text{CH}_2)_n-\text{OH}. (a) Calculate the repeat unit formula weight using C=12.011 g/mol\text{C} = 12.011\text{ g/mol}, H=1.008 g/mol\text{H} = 1.008\text{ g/mol}, and O=15.999 g/mol\text{O} = 15.999\text{ g/mol}. (b) If an end-group titration on a 2.500 g2.500\text{ g} sample of this polymer indicates exactly 1.042×10−4 mol1.042 \times 10^{-4}\text{ mol} of polymer chains (each containing two terminal hydroxyl groups), determine the experimental number-average molar mass (MnM_n) of the sample and calculate the integer value of nn.

Answer and steps

Final answer

(a) Repeat unit mass: 44.053 g/mol44.053\text{ g/mol}; (b) Mn=2.400×104 g/molM_n = 2.400 \times 10^4\text{ g/mol} (or 23992 g/mol23992\text{ g/mol}), n=544n = 544

Steps

Part (a): Repeat Unit Formula Weight

The structural formula of poly(ethylene glycol) is written as: H−(O−CHX2−CHX2)n−OH\ce{H-(O-CH2-CH2)}_n\ce{-OH}

  1. Identify the repeat unit:
    The repeating segment enclosed in parentheses is −O−CHX2−CHX2X−\ce{-O-CH2-CH2-}, which has the molecular formula CX2HX4O\ce{C2H4O}.
  2. Sum the atomic masses:
    Using the given atomic weights:

    • Carbon (C):2×12.011 g/mol=24.022 g/mol\text{Carbon (C)}: 2 \times 12.011\text{ g/mol} = 24.022\text{ g/mol}
    • Hydrogen (H):4×1.008 g/mol=4.032 g/mol\text{Hydrogen (H)}: 4 \times 1.008\text{ g/mol} = 4.032\text{ g/mol}
    • Oxygen (O):1×15.999 g/mol=15.999 g/mol\text{Oxygen (O)}: 1 \times 15.999\text{ g/mol} = 15.999\text{ g/mol}

    Molar mass of repeat unit=24.022+4.032+15.999=44.053 g/mol\text{Molar mass of repeat unit} = 24.022 + 4.032 + 15.999 = 44.053\text{ g/mol}


Part (b): Number-Average Molar Mass (MnM_n) and Degree of Polymerization (nn)

  1. Calculate the number-average molar mass (MnM_n):
    Molar mass is defined as the total mass of the sample divided by the total number of moles of chains: Mn=mnchainsM_n = \frac{m}{n_{\text{chains}}}

    Substitute the given values: Mn=2.500 g1.042×10−4 mol≈23992 g/mol≈2.400×104 g/molM_n = \frac{2.500\text{ g}}{1.042 \times 10^{-4}\text{ mol}} \approx 23992\text{ g/mol} \approx 2.400 \times 10^4\text{ g/mol}

  2. Account for the terminal end-groups:
    The full polymer formula is H−(CX2HX4O)n−OH\ce{H-(C2H4O)}_n\ce{-OH}.
    The two terminal groups together consist of H−\ce{H\bond{-}} and −OH\ce{\bond{-}OH}, which correspond to one water molecule (HX2O\ce{H2O}): Mend groups=2(1.008)+15.999=18.015 g/molM_{\text{end groups}} = 2(1.008) + 15.999 = 18.015\text{ g/mol}

    The total molar mass of a chain is related to the degree of polymerization nn by: Mn=Mend groups+n⋅Mrepeat unitM_n = M_{\text{end groups}} + n \cdot M_{\text{repeat unit}}

    Common Pitfall: Forgetting to subtract the molar mass of the end groups before dividing by the repeat unit mass can alter the rounded integer value of nn.

  3. Solve for the integer degree of polymerization (nn):
    n=Mn−Mend groupsMrepeat unit=23992.32 g/mol−18.015 g/mol44.053 g/mol=23974.30544.053≈544.21n = \frac{M_n - M_{\text{end groups}}}{M_{\text{repeat unit}}} = \frac{23992.32\text{ g/mol} - 18.015\text{ g/mol}}{44.053\text{ g/mol}} = \frac{23974.305}{44.053} \approx 544.21

    Rounding to the nearest whole integer gives: n=544n = 544

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student might neglect the molar mass contribution of the terminal end groups (H2O) when solving for n, dividing the total Mn directly by the repeat unit molar mass.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Repeat unit=CX2HX4O  ⟹  Mrepeat=2(12.011)+4(1.008)+15.999=44.053 g/mol\text{Repeat unit} = \ce{C2H4O} \implies M_{\text{repeat}} = 2(12.011) + 4(1.008) + 15.999 = 44.053\text{ g/mol}

  2. Step 2

    Mn=2.500 g1.042×10−4 mol=23992 g/molM_n = \frac{2.500\text{ g}}{1.042 \times 10^{-4}\text{ mol}} = 23992\text{ g/mol}

  3. Step 3

    n=MnMrepeat  ⟹  n=2399244.053=544.6n = \frac{M_n}{M_{\text{repeat}}} \implies n = \frac{23992}{44.053} = 544.6

    Correct

    n=Mn−Mend groupsMrepeat=23992−18.01544.053≈544.21n = \frac{M_n - M_{\text{end groups}}}{M_{\text{repeat}}} = \frac{23992 - 18.015}{44.053} \approx 544.21

    You divided the total molar mass directly by the repeat unit mass without subtracting the terminal end groups (H−\ce{H\bond{-}} and −OH\ce{\bond{-}OH}, which together equal HX2O\ce{H2O}, 18.015 g/mol18.015\text{ g/mol}).

  4. Step 4

    n=545n = 545

    Correct

    n=544n = 544

    Because the end-group mass was not subtracted, your unrounded value of 544.6544.6 rounded up to 545545 instead of the correct integer 544544.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the repeat unit as −O−CHX2−CHX2X−\ce{-O-CH2-CH2-} (CX2HX4O\ce{C2H4O}) and calculated its molar mass accurately.

You correctly calculated the number-average molar mass MnM_n from the given sample mass and chain moles.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of polymer end-group contribution

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that the entire molar mass of a linear polymer chain consists exclusively of repeating units, neglecting the contribution of the two capping end groups (H−\ce{H\bond{-}} and −OH\ce{\bond{-}OH}, corresponding to one HX2O\ce{H2O} molecule per chain).

REASONING PATH
Your ACEpath teacher’s suggested approach
Account for End Groups
  • Mn=n⋅Mrepeat+Mend groupsM_n = n \cdot M_{\text{repeat}} + M_{\text{end groups}}

  • Before dividing by the repeat unit molar mass, always subtract the combined mass of all terminal capping groups from the total chain molar mass.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine the combined molar mass of the terminal end groups: Mend groups=M(HX2O)=2(1.008)+15.999=18.015 g/molM_{\text{end groups}} = M(\ce{H2O}) = 2(1.008) + 15.999 = 18.015\text{ g/mol}.

  2. Subtract the end-group mass from MnM_n: Mchain, repeat=23992.32 g/mol−18.015 g/mol=23974.31 g/molM_{\text{chain, repeat}} = 23992.32\text{ g/mol} - 18.015\text{ g/mol} = 23974.31\text{ g/mol}.

  3. Divide by the repeat unit molar mass: n=23974.31 g/mol44.053 g/mol≈544.21n = \frac{23974.31\text{ g/mol}}{44.053\text{ g/mol}} \approx 544.21.

  4. Round to the nearest whole integer: n=544n = 544.

Final answer

(a) Repeat unit mass: 44.053 g/mol44.053\text{ g/mol}; (b) Mn=2.400×104 g/molM_n = 2.400 \times 10^4\text{ g/mol} (or 23992 g/mol23992\text{ g/mol}), n=544n = 544

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down the explicit structural formula showing terminal groups before setting up the equation for MnM_n.

  • Calculate Mend groupsM_{\text{end groups}} separately as a checkpoint step before computing degree of polymerization nn.

OverviewACEpath Teacher's Diagnosis

02 A student might confuse the number of moles of hydroxyl end groups with the number of moles of polymer chains, doubling the moles of polymer and halving the calculated Mn.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Repeat unit=CX2HX4O  ⟹  Mrepeat=2(12.011)+4(1.008)+15.999=44.053 g/mol\text{Repeat unit} = \ce{C2H4O} \implies M_{\text{repeat}} = 2(12.011) + 4(1.008) + 15.999 = 44.053\text{ g/mol}

  2. Step 2

    Moles of chains=2×(1.042×10−4 mol)=2.084×10−4 mol\text{Moles of chains} = 2 \times (1.042 \times 10^{-4}\text{ mol}) = 2.084 \times 10^{-4}\text{ mol}

    Correct

    nchains=1.042×10−4 moln_{\text{chains}} = 1.042 \times 10^{-4}\text{ mol}

    The problem directly specifies that the sample contains 1.042×10−4 mol1.042 \times 10^{-4}\text{ mol} of polymer chains. You did not need to multiply by 22; that factor would only apply if you were converting from moles of chains to moles of −OH-\ce{OH} groups.

  3. Step 3

    Mn=2.500 g2.084×10−4 mol=11996 g/molM_n = \frac{2.500\text{ g}}{2.084 \times 10^{-4}\text{ mol}} = 11996\text{ g/mol}

    Correct

    Mn=2.500 g1.042×10−4 mol≈23992 g/mol≈2.400×104 g/molM_n = \frac{2.500\text{ g}}{1.042 \times 10^{-4}\text{ mol}} \approx 23992\text{ g/mol} \approx 2.400 \times 10^4\text{ g/mol}

    You used the correct relationship Mn=mnchainsM_n = \frac{m}{n_{\text{chains}}}, but the value is halved because of the doubled mole count from step 2.

  4. Step 4

    n=11996−18.01544.053=271.9  ⟹  n=272n = \frac{11996 - 18.015}{44.053} = 271.9 \implies n = 272

    Correct

    n=23992.32−18.01544.053≈544.21  ⟹  n=544n = \frac{23992.32 - 18.015}{44.053} \approx 544.21 \implies n = 544

    You correctly subtracted the mass of the water end groups (18.015 g/mol18.015\text{ g/mol}) before dividing by the repeat unit mass, but the resulting degree of polymerization is off because of the propagated MnM_n value.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the repeat unit molar mass accurately from atomic weights.

You correctly applied the definition of number-average molar mass as total mass divided by moles of chains.

You remembered to subtract the terminal end-group mass (extH2extO ext{H}_2 ext{O}) before solving for nn.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Chain Moles vs. End-Group Moles Confusion

You doubled the given quantity because each chain has two hydroxyl groups, confusing moles of chains with moles of end groups.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Misinterpreting which entity was quantified in the prompt: when a problem gives moles of whole chains, each chain is counted once regardless of how many functional end groups it carries (nend groups=2×nchainsn_{\text{end groups}} = 2 \times n_{\text{chains}}, so nchains=nend groups/2n_{\text{chains}} = n_{\text{end groups}} / 2, not 2×nchains2 \times n_{\text{chains}}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Entity Check
  • 1 chain=2 end groups  ⟹  nend groups=2⋅nchains1\text{ chain} = 2\text{ end groups} \implies n_{\text{end groups}} = 2 \cdot n_{\text{chains}}

  • Always check whether the given number represents moles of end groups or moles of complete polymer chains before setting up Mn=m/nchainsM_n = m / n_{\text{chains}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set nchains=1.042×10−4 moln_{\text{chains}} = 1.042 \times 10^{-4}\text{ mol}.

  2. Calculate Mn=2.500 g1.042×10−4 mol=23992 g/molM_n = \frac{2.500\text{ g}}{1.042 \times 10^{-4}\text{ mol}} = 23992\text{ g/mol}.

  3. Subtract end-group mass and solve for nn: n=23992.32−18.01544.053≈544.21n = \frac{23992.32 - 18.015}{44.053} \approx 544.21.

Final answer

(a) 44.053 g/mol44.053\text{ g/mol}; (b) Mn=2.400×104 g/molM_n = 2.400 \times 10^4\text{ g/mol}, n=544n = 544

NEXT STEPS
Final Takeaways from Your Teacher
  • Review stoichiometric conversions between whole molecules/chains and their constituent functional groups.

  • Practice identifying whether a titration problem reports the titrant equivalent of end groups or the calculated moles of polymer macromolecules.

OverviewACEpath Teacher's Diagnosis

03 A student might incorrectly identify the repeating unit by including the extra oxygen from the chain terminus, taking the repeat unit formula as C2H4O2.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Repeat unit=CX2HX4OX2  ⟹  Mrepeat=2(12.011)+4(1.008)+2(15.999)=60.052 g/mol\text{Repeat unit} = \ce{C2H4O2} \implies M_{\text{repeat}} = 2(12.011) + 4(1.008) + 2(15.999) = 60.052\text{ g/mol}

    Correct

    Repeat unit=CX2HX4O  ⟹  Mrepeat=2(12.011)+4(1.008)+15.999=44.053 g/mol\text{Repeat unit} = \ce{C2H4O} \implies M_{\text{repeat}} = 2(12.011) + 4(1.008) + 15.999 = 44.053\text{ g/mol}

    The repeating segment inside the parentheses is −O−CHX2−CHX2X−\ce{-O-CH2-CH2-}, which contains two carbon atoms, four hydrogen atoms, and only one oxygen atom (ceC2H4O\\ce{C2H4O}).

  2. Step 2

    Mn=2.500 g/(1.042×10−4 mol)=23992 g/molM_n = 2.500\text{ g} / (1.042 \times 10^{-4}\text{ mol}) = 23992\text{ g/mol}

  3. Step 3

    n=(23992−2.016)/60.052=399.5  ⟹  n=400n = (23992 - 2.016) / 60.052 = 399.5 \implies n = 400

    Correct

    n=23992−18.01544.053≈544.21  ⟹  n=544n = \frac{23992 - 18.015}{44.053} \approx 544.21 \implies n = 544

    The terminal end groups outside the parentheses are HX−\ce{H-} and −OH\ce{-OH}, which together correspond to a water molecule (HX2O\ce{H2O}, 18.015 g/mol18.015\text{ g/mol}), not just two hydrogens. Dividing the remaining backbone mass by the correct repeat unit weight (44.053 g/mol44.053\text{ g/mol}) yields n=544n = 544.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the number-average molar mass from the sample mass and the molar amount of polymer chains.

You recognized that terminal end-group mass must be subtracted from MnM_n before solving for the degree of polymerization.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect Repeat Unit Composition

You counted two oxygen atoms instead of one in the repeat unit formula, and subtracted only 2 H2\text{ H} instead of a full HX2O\ce{H2O} unit for the chain termini.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the atoms that belong exclusively inside the repeating parenthesis with those situated at the chain termini leads to double-counting oxygen in the repeat unit while omitting it from the end groups.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolate the Parenthesized Formula
  • Only the atoms strictly enclosed within the subscript nn parentheses constitute the repeat unit.

  • Count atoms directly from −O−CHX2−CHX2X−\ce{-O-CH2-CH2-}; here there are 2 C2\text{ C}, 4 H4\text{ H}, and 1 O1\text{ O}, giving CX2HX4O\ce{C2H4O}.

Account for Both End Groups
  • Mn=n⋅Mrepeat+Mend groupsM_n = n \cdot M_{\text{repeat}} + M_{\text{end groups}}, where Mend groupsM_{\text{end groups}} includes all atoms outside the parentheses.

  • Combine the left cap HX−\ce{H-} and right cap −OH\ce{-OH} into HX2O\ce{H2O} (18.015 g/mol18.015\text{ g/mol}) and subtract that value from MnM_n.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the end-group contribution from the chemical formula H−(O−CHX2−CHX2)n−OH\ce{H-(O-CH2-CH2)}_n\ce{-OH}: the terminal atoms outside parentheses are H\ce{H} and OH\ce{OH}, which sum to HX2O\ce{H2O} with molar mass 2(1.008)+15.999=18.015 g/mol2(1.008) + 15.999 = 18.015\text{ g/mol}.

  2. Subtract the end-group mass from the experimental MnM_n: Mbackbone=23992.32 g/mol−18.015 g/mol=23974.31 g/molM_{\text{backbone}} = 23992.32\text{ g/mol} - 18.015\text{ g/mol} = 23974.31\text{ g/mol}.

  3. Divide by the correct repeat unit molar mass of CX2HX4O\ce{C2H4O} (44.053 g/mol44.053\text{ g/mol}): n=23974.3144.053≈544.21n = \frac{23974.31}{44.053} \approx 544.21.

  4. Round to the nearest integer: n=544n = 544.

Final answer

n=544n = 544

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the condensed formula of the segment strictly inside the parentheses before calculating its formula weight.

  • Circle the terminal groups outside the parentheses on both sides of the polymer chain and sum their atomic weights together to form Mend groupsM_{\text{end groups}}.

Lock it in

Similar question

01

A linear poly(lactic acid) sample has the formula H−(O−CH(CHX3)−CO)n−OH\ce{H-(O-CH(CH3)-CO)}_n\ce{-OH}. (a) Calculate the repeat unit molar mass (CX3HX4OX2\ce{C3H4O2}) using C=12.011\text{C} = 12.011, H=1.008\text{H} = 1.008, and O=15.999 g/mol\text{O} = 15.999\text{ g/mol}. (b) If Mn=7218 g/molM_n = 7218\text{ g/mol}, determine the integer degree of polymerization nn.

Answer

(a) Mrepeat=3(12.011)+4(1.008)+2(15.999)=72.063 g/molM_{\text{repeat}} = 3(12.011) + 4(1.008) + 2(15.999) = 72.063\text{ g/mol}. (b) End groups: H−\ce{H\bond{-}} and −OH  ⟹  HX2O=18.015 g/mol\ce{\bond{-}OH} \implies \ce{H2O} = 18.015\text{ g/mol}. n=7218−18.01572.063=7199.98572.063≈99.91  ⟹  n=100n = \frac{7218 - 18.015}{72.063} = \frac{7199.985}{72.063} \approx 99.91 \implies n = 100.

02

An α,ω\alpha,\omega-dicarboxylic acid terminated polystyrene has the structure HOOC−CHX2−(CHX2−CH(CX6HX5))n−CHX2−COOH\ce{HOOC-CH2-(CH2-CH(C6H5))}_n\ce{-CH2-COOH}. Titration shows Mn=10520 g/molM_n = 10520\text{ g/mol}. Given Mrepeat=104.15 g/molM_{\text{repeat}} = 104.15\text{ g/mol} (styrene, CX8HX8\ce{C8H8}) and the combined end-group formula is CX4HX6OX4\ce{C4H6O4} (Mend=118.09 g/molM_{\text{end}} = 118.09\text{ g/mol}), calculate the integer degree of polymerization nn.

Answer

Mn=n⋅Mrepeat+MendM_n = n \cdot M_{\text{repeat}} + M_{\text{end}} n=Mn−MendMrepeat=10520−118.09104.15=10401.91104.15≈99.87  ⟹  n=100n = \frac{M_n - M_{\text{end}}}{M_{\text{repeat}}} = \frac{10520 - 118.09}{104.15} = \frac{10401.91}{104.15} \approx 99.87 \implies n = 100.

03

A poly(methyl methacrylate) (PMMA) sample initiated by AIBN has an isobutyronitrile group at both ends: (CHX3)X2C(CN)−(CHX2−C(CHX3)(COOCHX3))n−C(CN)(CHX3)X2\ce{(CH3)2C(CN)-(CH2-C(CH3)(COOCH3))}_n\ce{-C(CN)(CH3)2}. The repeat unit molar mass is 100.12 g/mol100.12\text{ g/mol} and each end group has formula CX4HX6N\ce{C4H6N} (68.10 g/mol68.10\text{ g/mol}). A 1.500 g1.500\text{ g} sample contains 1.225×10−4 mol1.225 \times 10^{-4}\text{ mol} of chains. Determine MnM_n and the integer degree of polymerization nn.

Answer
  1. Mn=1.500 g1.225×10−4 mol=12245 g/molM_n = \frac{1.500\text{ g}}{1.225 \times 10^{-4}\text{ mol}} = 12245\text{ g/mol}.
  2. Combined end groups: 2×68.10=136.20 g/mol2 \times 68.10 = 136.20\text{ g/mol}.
  3. n=12245−136.20100.12=12108.8100.12≈120.94  ⟹  n=121n = \frac{12245 - 136.20}{100.12} = \frac{12108.8}{100.12} \approx 120.94 \implies n = 121.
Loading workspace…