Resources

Consider the series of linear noble gases and linear unbranched alkanes as molecular size approaches large values. As the carbon chain length of unbranched liquid alkanes increases from pentane (C5H12\text{C}_5\text{H}_{12}) to nn-eicosane (C20H42\text{C}_{20}\text{H}_{42}), identify the sole intermolecular force holding the molecules together, describe how the strength of this force behaves in the asymptotic limit of large molecular weight, and predict the resulting physical state at 25∘C25^\circ\text{C} and 1 atm1\text{ atm}.

Answer and steps

Final answer

The sole intermolecular force present is London dispersion forces. In the limit of increasing molecular chain length and molecular weight, total electron count increases linearly (170170 electrons in C20H42\text{C}_{20}\text{H}_{42} vs. 4242 in C5H12\text{C}_5\text{H}_{12}) and accessible molecular contact surface area increases, causing cumulative dispersion attractive energies to increase monotonically until they exceed typical room-temperature thermal energy (kBTk_B T). Consequently, nn-eicosane is a waxy solid at 25∘C25^\circ\text{C} and 1 atm1\text{ atm} (melting point ≈36.8∘C\approx 36.8^\circ\text{C}).

Steps

01

Identifying the Intermolecular Force

Alkanes are hydrocarbons containing only carbon–carbon (C−C\ce{C-C}) and carbon–hydrogen (C−H\ce{C-H}) bonds.

  • The electronegativity difference between carbon (2.552.55) and hydrogen (2.202.20) is very small (Δχ≈0.35\Delta \chi \approx 0.35), rendering the bonds virtually nonpolar.
  • Because the molecules are symmetric and nonpolar, they possess no permanent dipole moments and cannot participate in dipole–dipole interactions or hydrogen bonding.

Therefore, the sole intermolecular force operating between unbranched alkane molecules is London dispersion forces (induced dipole–induced dipole attractions).


02

Behavior of Dispersion Forces with Increasing Molecular Size

London dispersion forces arise from momentary fluctuations in electron distribution that create temporary dipoles, which in turn induce dipoles in neighboring molecules:

  1. Polarizability and Electron Count: As the chain grows from pentane (CX5HX12\ce{C5H12}) to nn-eicosane (CX20HX42\ce{C20H42}), the total number of electrons increases dramatically from 4242 to 170170. A larger, more diffuse electron cloud is more easily distorted (higher polarizability), leading to stronger instantaneous and induced dipoles.
  2. Contact Surface Area: In unbranched (linear) alkanes, an extended zigzag chain geometry provides an extensive surface area for intermolecular contact. Adjacent chains can align parallel to one another, allowing dispersion interactions to act additively along the entire length of the carbon backbone.

As molecular weight and chain length become very large, the cumulative dispersion energy increases monotonically and eventually exceeds the thermal kinetic energy (kBTk_B T) available at room temperature.


03

Predicting the Physical State at 25∘C25^\circ\text{C} and 1 atm1\text{ atm}

  • Smaller liquid alkanes like pentane (CX5HX12\ce{C5H12}) have sufficiently weak cumulative attractions that thermal energy keeps them in the liquid phase (boiling point ≈36.1∘C\approx 36.1^\circ\text{C}, melting point ≈−129.7∘C\approx -129.7^\circ\text{C}).
  • For nn-eicosane (CX20HX42\ce{C20H42}), the sum of dispersion forces along its 20-carbon chain is so strong that molecules become held in a rigid crystal lattice at room temperature.

With a melting point of approximately 36.8∘C36.8^\circ\text{C}, nn-eicosane is a waxy solid at 25∘C25^\circ\text{C} and 1 atm1\text{ atm}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student assumes that hydrocarbons of moderate chain length remain liquids at room temperature similar to pentane and octane, predicting a liquid state instead of a solid for n-eicosane.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    London dispersion forces

  2. Step 2

    Polarizability increases with 20 carbons compared to 5 carbons. ⟹\Longrightarrow Strength of London dispersion forces increases with chain length.

  3. Step 3

    Liquid at 25∘C25^\circ\text{C} and 1 atm1\text{ atm}

    Correct

    Solid (waxy solid) at 25∘C25^\circ\text{C} and 1 atm1\text{ atm}

    By 2020 carbon atoms (melting point ≈36.8∘C\approx 36.8^\circ\text{C}), cumulative dispersion forces along the extended linear chain exceed room-temperature thermal energy (kBTk_B T), holding the molecules in a solid lattice rather than a liquid state.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified London dispersion forces as the primary intermolecular force governing nonpolar hydrocarbons.

You accurately connected longer carbon chains and greater electron counts to increased polarizability and stronger dispersion attractions.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Phase state misjudgment for high-molecular-weight nonpolar compounds

You recognized that dispersion forces increase with molecular size, but you assumed nn-eicosane remains a liquid at room temperature like mid-range alkanes.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking that London dispersion forces are additive over long molecular contact areas and can surpass thermal kinetic energy at 25∘C25^\circ\text{C}, leading to a solid state for unbranched alkanes with approximately 1818 or more carbons.

REASONING PATH
Your ACEpath teacher’s suggested approach
Alkane Phase Transitions vs. Chain Length
  • At 25∘C25^\circ\text{C} and 1 atm1\text{ atm}, straight-chain alkanes transition from gases (C1–C4\text{C}_1\text{--}\text{C}_4) to liquids (C5–C17\text{C}_5\text{--}\text{C}_{17}) to waxy solids (C18+\text{C}_{18+}).

  • Check whether the carbon count is 1818 or greater when predicting the room-temperature phase of an unbranched alkane.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Evaluate the cumulative dispersion force: an unbranched 2020-carbon alkane has 170170 electrons and an extended linear contact surface.

  2. Compare the resulting intermolecular attraction to ambient thermal energy (kBTk_B T at 298 K298\text{ K}): the lattice energy exceeds thermal agitation.

  3. Determine the physical state: because the melting point of nn-eicosane is ≈36.8∘C\approx 36.8^\circ\text{C}, it is below its melting point at 25∘C25^\circ\text{C}.

Final answer

Solid (waxy solid) at 25∘C25^\circ\text{C} and 1 atm1\text{ atm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the room-temperature states of unbranched alkanes: C1–C4\text{C}_1\text{--}\text{C}_4 are gases, C5–C17\text{C}_5\text{--}\text{C}_{17} are liquids, and C18\text{C}_{18} and above are solids.

  • Practice comparing cumulative non-covalent interactions against room-temperature thermal energy (kBT≈2.5 kJ/molk_B T \approx 2.5\text{ kJ/mol}) across large polymers and long-chain hydrocarbons.

OverviewACEpath Teacher's Diagnosis

02 The student mistakenly identifies hydrogen bonding as the intermolecular force due to the presence of numerous hydrogen atoms bonded along the hydrocarbon chain.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Hydrogen bonding   ⟹  \implies Cumulative attraction increases across 42 hydrogen atoms.

    Correct

    London dispersion forces (induced dipole–induced dipole attractions).

    Hydrogen bonding requires a hydrogen atom covalently bonded to a highly electronegative atom (specifically N\text{N}, O\text{O}, or F\text{F}) with available lone pairs. Because alkanes contain only nonpolar C−C\ce{C-C} and C−H\ce{C-H} bonds (electronegativity difference ≈0.35\approx 0.35), they possess no permanent dipoles and cannot form hydrogen bonds. The only intermolecular force present is London dispersion forces.

  2. Step 2

    Strength of attraction increases with chain length.

    Correct

    As chain length and molecular weight increase, the total electron count increases (from 4242 electrons in CX5HX12\ce{C5H12} to 170170 in CX20HX42\ce{C20H42}), increasing polarizability and molecular contact surface area, causing London dispersion attractions to increase monotonically.

    Your trend direction is correct, but the underlying mechanism is driven by increased electron count (higher polarizability) and greater surface contact area between parallel zigzag hydrocarbon chains, rather than cumulative hydrogen bonding.

  3. Step 3

    Solid at 25∘C25^\circ\text{C} and 1 atm1\text{ atm}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the overall intermolecular attraction strengthens as hydrocarbon chain length increases.

You accurately predicted that nn-eicosane is a solid at 25∘C25^\circ\text{C} and 1 atm1\text{ atm}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misidentifying London dispersion forces as hydrogen bonding in hydrocarbons

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that the presence of hydrogen atoms in a molecular formula (extC20extH42 ext{C}_{20} ext{H}_{42}) implies hydrogen bonding, overlooking the strict requirement that hydrogen must be directly bonded to a highly electronegative atom (N, O, or F).

REASONING PATH
Your ACEpath teacher’s suggested approach
Hydrogen Bonding Criteria
  • A hydrogen bond occurs only when hydrogen is covalently bonded directly to N\text{N}, O\text{O}, or F\text{F}, interacting with a lone pair on an adjacent N\text{N}, O\text{O}, or F\text{F} atom.

  • Check the constituent atoms: if a molecule contains only carbon and hydrogen, it cannot participate in hydrogen bonding.

Nonpolar Hydrocarbon IMF
  • Molecules consisting solely of carbon and hydrogen are essentially nonpolar and interact exclusively via London dispersion forces.

  • Attribute all intermolecular attraction in pure alkanes to instantaneous induced dipoles (London dispersion forces).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Alkanes contain only C−C\ce{C-C} and C−H\ce{C-H} bonds, which have negligible electronegativity differences and no permanent dipoles.

  2. Therefore, the sole intermolecular force holding alkane molecules together is London dispersion forces.

  3. As chain length increases from CX5HX12\ce{C5H12} to CX20HX42\ce{C20H42}, the electron count increases from 4242 to 170170 electrons, greatly enhancing polarizability and contact surface area along the unbranched chains.

  4. The cumulative dispersion energy increases monotonically until it exceeds thermal energy at room temperature, making nn-eicosane a waxy solid at 25∘C25^\circ\text{C}.

Final answer

The sole intermolecular force is London dispersion forces; its strength increases monotonically due to higher electron count (polarizability) and greater contact surface area, making nn-eicosane a solid at 25∘C25^\circ\text{C} and 1 atm1\text{ atm}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the specific structural prerequisites for hydrogen bonding: a donor with an H−F\ce{H-F}, H−O\ce{H-O}, or H−N\ce{H-N} bond and an acceptor with an available lone pair on F\text{F}, O\text{O}, or N\text{N}.

  • Practice identifying the dominant intermolecular force in various organic families (alkanes, alcohols, ethers, carboxylic acids) based on functional groups.

OverviewACEpath Teacher's Diagnosis

03 The student assumes London dispersion forces are inherently weak and negligible regardless of molecular size, concluding that the force does not increase enough to change physical behavior.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    London dispersion forces

  2. Step 2

    Dispersion forces remain weak and negligible across all sizes.   ⟹  \implies Attraction does not increase significantly.

    Correct

    As chain length increases from C5H12\text{C}_5\text{H}_{12} to C20H42\text{C}_{20}\text{H}_{42}, the total electron count increases from 4242 to 170170 and molecular contact surface area increases substantially, causing cumulative London dispersion forces to increase dramatically.

    London dispersion forces are additive along molecular contact areas. In larger molecules with more polarizable electron clouds, cumulative dispersion forces become very strong rather than remaining negligible.

  3. Step 3

    Gas at 25∘C25^\circ\text{C} and 1 atm1\text{ atm}

    Correct

    Waxy solid at 25∘C25^\circ\text{C} and 1 atm1\text{ atm}

    Because dispersion attractions along the 2020-carbon chain of nn-eicosane cumulatively exceed thermal kinetic energy at room temperature, the substance is a solid, not a gas.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that unbranched alkanes lack permanent dipoles and rely solely on London dispersion forces.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Cumulative London Dispersion Misconception

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated London dispersion forces as intrinsically weak and invariant rather than recognizing that dispersion forces scale with electron count, polarizability, and molecular surface contact area.

REASONING PATH
Your ACEpath teacher’s suggested approach
Scaling of Dispersion Forces
  • London dispersion forces scale with polarizability (total electron count) and contact surface area.

  • Whenever molecular size or chain length increases, sum the dispersion interactions along the entire molecule instead of assuming they remain negligible.

Intermolecular Forces vs. Thermal Energy
  • When cumulative intermolecular forces exceed ambient thermal kinetic energy (kBTk_B T), substances condense into liquids and freeze into solids.

  • Check the room-temperature state of large nonpolar molecules (such as paraffin waxes and polymers like polyethylene) to verify that large nonpolar species are solids at 25∘C25^\circ\text{C}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Count electrons and compare surface contact area: pentane (C5H12\text{C}_5\text{H}_{12}) has 4242 electrons, whereas nn-eicosane (C20H42\text{C}_{20}\text{H}_{42}) has 170170 electrons.

  2. Recognize that greater polarizability and extensive parallel contact along the extended 2020-carbon zigzag chain allow cumulative dispersion attractions to increase monotonically.

  3. Compare the resulting attractive energy to room-temperature thermal energy (kBTk_B T): the attractions are strong enough to lock molecules into a crystal lattice (melting point ≈36.8∘C\approx 36.8^\circ\text{C}).

Final answer

The sole intermolecular force is London dispersion forces; their cumulative strength increases significantly with electron count and surface area, making nn-eicosane a waxy solid at 25∘C25^\circ\text{C} and 1 atm1\text{ atm}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how electron cloud volume and molecular contact area govern the magnitude of induced dipoles.

  • Practice comparing boiling and melting points of homologous nonpolar series (such as halogens and linear alkanes).

Lock it in

Similar question

01

At 25∘C25^\circ\text{C} and 1 atm1\text{ atm}, pentane (C5H12\text{C}_5\text{H}_{12}) is a liquid, while methane (CH4\text{CH}_4) is a gas and paraffin wax (C25H52\text{C}_{25}\text{H}_{52}) is a solid. Explain this trend using intermolecular force principles.

Answer

All three molecules are nonpolar and interact exclusively via London dispersion forces. As chain length increases from C1\text{C}_1 to C25\text{C}_{25}, polarizability and contact surface area increase dramatically. For CH4\text{CH}_4, attractions are weaker than thermal energy (gas); for C5H12\text{C}_5\text{H}_{12}, they are strong enough to condense the substance into a liquid; for C25H52\text{C}_{25}\text{H}_{52}, cumulative attractions hold the molecules in a rigid crystal lattice (solid).

02

Compare the boiling points and intermolecular force strengths of nn-pentane (C5H12\text{C}_5\text{H}_{12}) and neopentane (C(CH3)4\text{C}(\text{CH}_3)_4). Both have identical molecular formulas. Which has stronger dispersion forces, and why?

Answer

nn-Pentane has stronger dispersion forces and a higher boiling point (36.1∘C36.1^\circ\text{C} vs. 9.5∘C9.5^\circ\text{C}). The elongated zigzag shape of nn-pentane provides greater molecular contact surface area than the spherical, compact shape of neopentane, enabling more extensive instantaneous dipole contacts.

03

Linear polyethylene can be viewed as an alkane with thousands of repeat units, (−CH2−CH2−)n(-\text{CH}_2-\text{CH}_2-)_n. Despite having only nonpolar C−C\text{C}-\text{C} and C−H\text{C}-\text{H} bonds, high-density polyethylene is a tough, high-melting solid (Tm>130∘CT_m > 130^\circ\text{C}). Rationalize this observation in terms of molecular forces.

Answer

Although each individual dispersion interaction is relatively weak, a polymer chain containing thousands of carbon atoms possesses enormous contact surface area and hundreds of thousands of electrons. The sum of these dispersion forces across aligned adjacent chains is extraordinarily large, requiring high thermal energy (Tm>130∘CT_m > 130^\circ\text{C}) to disrupt the crystalline domains.

Loading workspace…