Resources

An industrial effluent contains sulfuric acid at a concentration of 490.0 mg/L490.0\text{ mg/L}. A volume of 2.50×103 L2.50 \times 10^3\text{ L} of this wastewater is treated by neutralizing it with solid calcium hydroxide via the reaction: H2SO4(aq)+Ca(OH)2(s)→CaSO4(s)+2H2O(l)\text{H}_2\text{SO}_4(aq) + \text{Ca(OH)}_2(s) \rightarrow \text{CaSO}_4(s) + 2\text{H}_2\text{O}(l). Given the molar masses of H2SO4\text{H}_2\text{SO}_4 (98.08 g/mol98.08\text{ g/mol}) and Ca(OH)2\text{Ca(OH)}_2 (74.09 g/mol74.09\text{ g/mol}), calculate the total mass of pure Ca(OH)2\text{Ca(OH)}_2 in grams required to achieve complete neutralization.

Answer and steps

Final answer

925 g925\text{ g}

Steps

01

Calculate the total mass of sulfuric acid (HX2SOX4\ce{H2SO4}) in the effluent

To find the required mass of calcium hydroxide, Ca(OH)X2\ce{Ca(OH)2}, we use the stoichiometry of the neutralization reaction.

First, find the total mass of dissolved HX2SOX4\ce{H2SO4} by multiplying its concentration by the effluent volume: Total mass of HX2SOX4=concentration×volume\text{Total mass of }\ce{H2SO4} = \text{concentration} \times \text{volume}

Convert the concentration from milligrams per liter to grams per liter: 490.0 mg/L=490.01000 g/L=0.4900 g/L490.0\text{ mg/L} = \frac{490.0}{1000}\text{ g/L} = 0.4900\text{ g/L}

Now, calculate the mass in grams: mHX2SOX4=0.4900 g/L×(2.50×103 L)=1225 gm_{\ce{H2SO4}} = 0.4900\text{ g/L} \times (2.50 \times 10^3\text{ L}) = 1225\text{ g}

02

Calculate the moles of HX2SOX4\ce{H2SO4}

Using the provided molar mass of HX2SOX4\ce{H2SO4} (M=98.08 g/molM = 98.08\text{ g/mol}): nHX2SOX4=mHX2SOX4MHX2SOX4=1225 g98.08 g/mol≈12.4898 moln_{\ce{H2SO4}} = \frac{m_{\ce{H2SO4}}}{M_{\ce{H2SO4}}} = \frac{1225\text{ g}}{98.08\text{ g/mol}} \approx 12.4898\text{ mol}

03

Determine the moles of Ca(OH)X2\ce{Ca(OH)2} required

Look at the balanced chemical equation for the neutralization: HX2SOX4(aq)+Ca(OH)X2(s)→CaSOX4(s)+2 HX2O(l)\ce{H2SO4(aq) + Ca(OH)2(s) -> CaSO4(s) + 2H2O(l)}

The stoichiometric mole ratio between HX2SOX4\ce{H2SO4} and Ca(OH)X2\ce{Ca(OH)2} is 1:11:1. Therefore: nCa(OH)X2=nHX2SOX4=12.4898 moln_{\ce{Ca(OH)2}} = n_{\ce{H2SO4}} = 12.4898\text{ mol}

Common Pitfall: Always verify whether the acid is diprotic and the base is dibasic. Although HX2SOX4\ce{H2SO4} supplies 2 H+2\text{ H}^+ ions and Ca(OH)X2\ce{Ca(OH)2} supplies 2 OH−2\text{ OH}^- ions, their reaction ratio is 1:11:1, so no additional multiplier of 22 is needed for the mole conversion between the two full compounds.

04

Calculate the required mass of Ca(OH)X2\ce{Ca(OH)2}

Multiply the moles of Ca(OH)X2\ce{Ca(OH)2} by its molar mass (74.09 g/mol74.09\text{ g/mol}): mCa(OH)X2=nCa(OH)X2×MCa(OH)X2=12.4898 mol×74.09 g/mol≈925.37 gm_{\ce{Ca(OH)2}} = n_{\ce{Ca(OH)2}} \times M_{\ce{Ca(OH)2}} = 12.4898\text{ mol} \times 74.09\text{ g/mol} \approx 925.37\text{ g}

Rounding to three significant figures (matching the given volume 2.50×103 L2.50 \times 10^3\text{ L}): mCa(OH)X2=925 gm_{\ce{Ca(OH)2}} = 925\text{ g}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert milligrams to grams, resulting in a calculated mass that is 1000 times too large.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Total mass HX2SOX4=490.0 mg/L×2500 L=1.225×106 g\text{Total mass } \ce{H2SO4} = 490.0\text{ mg/L} \times 2500\text{ L} = 1.225 \times 10^6\text{ g}

    Correct

    mHX2SOX4=490.0 mg/L×2500 L×1 g1000 mg=1225 gm_{\ce{H2SO4}} = 490.0\text{ mg/L} \times 2500\text{ L} \times \frac{1\text{ g}}{1000\text{ mg}} = 1225\text{ g}

    Multiplying concentration in mg/L\text{mg/L} by volume in L\text{L} yields mass in milligrams (mg\text{mg}), not grams (g\text{g}). You calculated 1.225×106 mg1.225 \times 10^6\text{ mg}, which equals 1225 g1225\text{ g} after dividing by 1000 mg/g1000\text{ mg/g}.

  2. Step 2

    Moles of HX2SOX4=1.225×106 g98.08 g/mol=12489.8 mol\text{Moles of } \ce{H2SO4} = \frac{1.225 \times 10^6\text{ g}}{98.08\text{ g/mol}} = 12489.8\text{ mol}

    Correct

    nHX2SOX4=1225 g98.08 g/mol≈12.49 moln_{\ce{H2SO4}} = \frac{1225\text{ g}}{98.08\text{ g/mol}} \approx 12.49\text{ mol}

    You correctly applied the formula n=mMn = \frac{m}{M}, but this step inherited the inflated mass from Step 1.

  3. Step 3

    Moles of Ca(OH)X2=12489.8 mol\text{Moles of } \ce{Ca(OH)2} = 12489.8\text{ mol}

    Correct

    nCa(OH)X2=nHX2SOX4≈12.49 moln_{\ce{Ca(OH)2}} = n_{\ce{H2SO4}} \approx 12.49\text{ mol}

    You correctly identified the 1:11:1 stoichiometric ratio between HX2SOX4\ce{H2SO4} and Ca(OH)X2\ce{Ca(OH)2}, though the numerical value carried over the previous factor of 10001000 error.

  4. Step 4

    Mass of Ca(OH)X2=12489.8 mol×74.09 g/mol=9.25×105 g\text{Mass of } \ce{Ca(OH)2} = 12489.8\text{ mol} \times 74.09\text{ g/mol} = 9.25 \times 10^5\text{ g}

    Correct

    mCa(OH)X2=12.49 mol×74.09 g/mol≈925 gm_{\ce{Ca(OH)2}} = 12.49\text{ mol} \times 74.09\text{ g/mol} \approx 925\text{ g}

    You correctly used the molar mass of calcium hydroxide to find the mass, but the final answer is 10001000 times too large due to the uncoverted mass in Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the balanced chemical equation to determine the 1:11:1 stoichiometric ratio between HX2SOX4\ce{H2SO4} and Ca(OH)X2\ce{Ca(OH)2}.

You properly applied the relationship between mass, molar mass, and moles in both directions.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Omission

You labeled the product of mg/L×L\text{mg/L} \times \text{L} directly as grams instead of milligrams.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked dimensional analysis consistency: molar mass is defined in g/mol\text{g/mol}, so input masses must be converted to grams before calculating moles.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Tracking in Concentration
  • (mg/L)×L=mg(\text{mg/L}) \times \text{L} = \text{mg}, whereas (g/L)×L=g(\text{g/L}) \times \text{L} = \text{g}.

  • Write out the unit fractions explicitly when multiplying: include 1 g1000 mg\frac{1\text{ g}}{1000\text{ mg}} whenever concentration is given in milligrams per liter.

Molar Mass Compatibility
  • Molar mass units are g/mol\text{g/mol}, which requires mass to be in grams to cancel correctly.

  • Check that the mass unit matches the numerator of the molar mass unit before dividing to find moles.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the mass of sulfuric acid to grams: mHX2SOX4=490.0 mg/L×2.50×103 L×1 g103 mg=1225 gm_{\ce{H2SO4}} = 490.0\text{ mg/L} \times 2.50 \times 10^3\text{ L} \times \frac{1\text{ g}}{10^3\text{ mg}} = 1225\text{ g}.

  2. Calculate moles of HX2SOX4\ce{H2SO4}: nHX2SOX4=1225 g98.08 g/mol≈12.490 moln_{\ce{H2SO4}} = \frac{1225\text{ g}}{98.08\text{ g/mol}} \approx 12.490\text{ mol}.

  3. Apply the 1:11:1 mole ratio: nCa(OH)X2=12.490 moln_{\ce{Ca(OH)2}} = 12.490\text{ mol}.

  4. Calculate mass of Ca(OH)X2\ce{Ca(OH)2}: mCa(OH)X2=12.490 mol×74.09 g/mol≈925.37 gm_{\ce{Ca(OH)2}} = 12.490\text{ mol} \times 74.09\text{ g/mol} \approx 925.37\text{ g}.

Final answer

925 g925\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice dimensional analysis by writing out units explicitly for every numerical quantity in multi-step stoichiometry problems.

  • Highlight given units like mg/L\text{mg/L} or mL\text{mL} at the start of a problem to flag required metric prefix conversions.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets the 2 in front of H2O in the chemical equation as requiring a 1:2 stoichiometric ratio between H2SO4 and Ca(OH)2, doubling the required mass.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Total mass HX2SOX4=490.0 mg/L×2500 L=1225 g\text{Total mass } \ce{H2SO4} = 490.0\text{ mg/L} \times 2500\text{ L} = 1225\text{ g}

  2. Step 2

    Moles of HX2SOX4=12.49 mol\text{Moles of } \ce{H2SO4} = 12.49\text{ mol}

  3. Step 3

    Moles of Ca(OH)X2=2×12.49 mol=24.98 mol\text{Moles of } \ce{Ca(OH)2} = 2 \times 12.49\text{ mol} = 24.98\text{ mol}

    Correct

    nCa(OH)X2=1×nHX2SOX4=12.49 moln_{\ce{Ca(OH)2}} = 1 \times n_{\ce{H2SO4}} = 12.49\text{ mol}

    You multiplied the moles of HX2SOX4\ce{H2SO4} by 22, but the balanced chemical equation shows a 1:11:1 mole ratio between HX2SOX4\ce{H2SO4} and Ca(OH)X2\ce{Ca(OH)2}.

  4. Step 4

    Mass of Ca(OH)X2=24.98 mol×74.09 g/mol=1851 g\text{Mass of } \ce{Ca(OH)2} = 24.98\text{ mol} \times 74.09\text{ g/mol} = 1851\text{ g}

    Correct

    mCa(OH)X2=12.49 mol×74.09 g/mol≈925 gm_{\ce{Ca(OH)2}} = 12.49\text{ mol} \times 74.09\text{ g/mol} \approx 925\text{ g}

    You applied the molar mass conversion formula correctly, but your final answer is doubled because of the stoichiometric ratio error in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately found the total mass of sulfuric acid from concentration and volume.

You correctly calculated the amount of sulfuric acid in moles using its molar mass.

You properly executed the final conversion from moles to grams using the molar mass of calcium hydroxide.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometric coefficient misinterpretation

You likely doubled the moles of base because of the coefficient 22 on HX2O\ce{H2O} or because sulfuric acid is diprotic.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the coefficient of a reaction product or the number of protons transferred with the stoichiometric ratio between the two reactants.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Reactant Coefficients
  • The mole ratio between two reactants depends only on their stoichiometric coefficients in the balanced equation: nAa=nBb\frac{n_A}{a} = \frac{n_B}{b}.

  • Circle the coefficients directly in front of the acid and base before writing down mole equivalents.

Diprotic Acid vs. Dibasic Base
  • One mole of diprotic acid (HX2SOX4\ce{H2SO4}) yields 2 H+2\text{ H}^+, and one mole of dibasic base (Ca(OH)X2\ce{Ca(OH)2}) yields 2 OH−2\text{ OH}^-.

  • Notice that 2 H+2\text{ H}^+ neutralize 2 OH−2\text{ OH}^- in a 1:11:1 ratio of formula units, producing 2HX2O2\ce{H2O} without altering the 1:11:1 reactant ratio.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the 1:11:1 mole ratio from the balanced equation: nCa(OH)X2=nHX2SOX4=12.49 moln_{\ce{Ca(OH)2}} = n_{\ce{H2SO4}} = 12.49\text{ mol}.

  2. Multiply by the molar mass of Ca(OH)X2\ce{Ca(OH)2}: mCa(OH)X2=12.49 mol×74.09 g/mol≈925.37 gm_{\ce{Ca(OH)2}} = 12.49\text{ mol} \times 74.09\text{ g/mol} \approx 925.37\text{ g}.

  3. Round to three significant figures to match the given data.

Final answer

925 g925\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the mole ratio explicitly as a conversion factor (1 mol Ca(OH)X21 mol HX2SOX4\frac{1\text{ mol }\ce{Ca(OH)2}}{1\text{ mol }\ce{H2SO4}}) to prevent accidental doubling.

  • Practice identifying mole ratios for acid-base reactions involving combinations of monoprotic, diprotic, and triprotic species.

OverviewACEpath Teacher's Diagnosis

03 The student divides by the molar mass of Ca(OH)2 instead of multiplying when converting from moles to mass.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Total mass HX2SOX4=490.0 mg/L×2500 L=1225 g\text{Total mass } \ce{H2SO4} = 490.0\text{ mg/L} \times 2500\text{ L} = 1225\text{ g}

  2. Step 2

    Moles of HX2SOX4=1225 g98.08 g/mol=12.49 mol\text{Moles of } \ce{H2SO4} = \frac{1225\text{ g}}{98.08\text{ g/mol}} = 12.49\text{ mol}

  3. Step 3

    Moles of Ca(OH)X2=12.49 mol\text{Moles of } \ce{Ca(OH)2} = 12.49\text{ mol}

  4. Step 4

    Mass of Ca(OH)X2=12.49 mol74.09 g/mol=0.169 g\text{Mass of } \ce{Ca(OH)2} = \frac{12.49\text{ mol}}{74.09\text{ g/mol}} = 0.169\text{ g}

    Correct

    mCa(OH)X2=12.49 mol×74.09 g/mol=925 gm_{\ce{Ca(OH)2}} = 12.49\text{ mol} \times 74.09\text{ g/mol} = 925\text{ g}

    To convert from moles to mass, multiply by molar mass rather than dividing: mass=n×M\text{mass} = n \times M.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted milligrams per liter into total grams of solute correctly.

You used the molar mass of sulfuric acid properly to find moles.

You recognized the 1:11:1 stoichiometric relationship between sulfuric acid and calcium hydroxide.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverse Operation in Mole-Mass Conversion

You set up a division instead of a multiplication in the final mole-to-mass step, likely by repeating the operation used when finding moles from mass.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the direction of dimensional analysis when converting between amount in moles and mass: finding moles from mass requires division by molar mass (g/(g/mol)=mol\text{g} / (\text{g/mol}) = \text{mol}), whereas finding mass from moles requires multiplication by molar mass (mol×(g/mol)=g\text{mol} \times (\text{g/mol}) = \text{g}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis Unit Check
  • mass (g)=moles (mol)×molar mass (g/mol)\text{mass (g)} = \text{moles (mol)} \times \text{molar mass (g/mol)}

  • Always write down the units in your calculation. Notice that molg/mol=mol2g\frac{\text{mol}}{\text{g/mol}} = \frac{\text{mol}^2}{\text{g}}, which does not give grams.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the formula relating mass, moles, and molar mass: m=n×Mm = n \times M.

  2. Substitute n=12.49 moln = 12.49\text{ mol} and M=74.09 g/molM = 74.09\text{ g/mol}: m=12.49 mol×74.09 g/mol=925.38 gm = 12.49\text{ mol} \times 74.09\text{ g/mol} = 925.38\text{ g}.

  3. Round to three significant figures to match the given data.

Final answer

925 g925\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Track units explicitly in each step so that unit cancellation flags inverse operations immediately.

  • Review the stoichiometry roadmap: divide by molar mass to get moles, multiply by molar mass to return to grams.

Lock it in

Similar question

01

A pond contains hydrochloric acid at a concentration of 182.5 mg/L182.5\text{ mg/L}. What mass (in grams) of pure NaOH\ce{NaOH} (molar mass 40.00 g/mol40.00\text{ g/mol}) is needed to neutralize 4.00×103 L4.00 \times 10^3\text{ L} of this water via HCl+NaOH→NaCl+HX2O\ce{HCl + NaOH -> NaCl + H2O}? (Molar mass of HCl=36.46 g/mol\ce{HCl} = 36.46\text{ g/mol})

Answer
  1. Find mass of HCl\ce{HCl}: 182.5 mg/L×4000 L×10−3 g/mg=730.0 g182.5\text{ mg/L} \times 4000\text{ L} \times 10^{-3}\text{ g/mg} = 730.0\text{ g}.\n2. Moles of HCl\ce{HCl}: 730.0 g36.46 g/mol≈20.022 mol\frac{730.0\text{ g}}{36.46\text{ g/mol}} \approx 20.022\text{ mol}.\n3. Mole ratio HCl:NaOH\ce{HCl}:\ce{NaOH} is 1:11:1, so nNaOH=20.022 moln_{\ce{NaOH}} = 20.022\text{ mol}.\n4. Mass of NaOH\ce{NaOH}: 20.022 mol×40.00 g/mol≈801 g20.022\text{ mol} \times 40.00\text{ g/mol} \approx 801\text{ g}.
02

An acidic runoff volume of 5.00×103 L5.00 \times 10^3\text{ L} contains nitric acid, HNOX3\ce{HNO3} (63.01 g/mol63.01\text{ g/mol}), at 630.0 mg/L630.0\text{ mg/L}. It is neutralized with solid calcium hydroxide, Ca(OH)X2\ce{Ca(OH)2} (74.09 g/mol74.09\text{ g/mol}), via the reaction: 2HNOX3+Ca(OH)X2→Ca(NOX3)X2+2 HX2O2\ce{HNO3} + \ce{Ca(OH)2 -> Ca(NO3)2 + 2H2O}. Calculate the mass of Ca(OH)X2\ce{Ca(OH)2} in grams required.

Answer
  1. Mass of HNOX3\ce{HNO3}: 630.0 mg/L×5000 L×10−3 g/mg=3150 g630.0\text{ mg/L} \times 5000\text{ L} \times 10^{-3}\text{ g/mg} = 3150\text{ g}.\n2. Moles of HNOX3\ce{HNO3}: 3150 g63.01 g/mol≈50.00 mol\frac{3150\text{ g}}{63.01\text{ g/mol}} \approx 50.00\text{ mol}.\n3. Mole ratio is 2HNOX3:1Ca(OH)X22\ce{HNO3} : 1\ce{Ca(OH)2}, so nCa(OH)X2=50.002=25.00 moln_{\ce{Ca(OH)2}} = \frac{50.00}{2} = 25.00\text{ mol}.\n4. Mass of Ca(OH)X2\ce{Ca(OH)2}: 25.00 mol×74.09 g/mol≈1.85×103 g25.00\text{ mol} \times 74.09\text{ g/mol} \approx 1.85 \times 10^3\text{ g} (or 1850 g1850\text{ g}).
03

A wastewater tank holds 1.20×104 L1.20 \times 10^4\text{ L} of effluent containing 245.2 mg/L245.2\text{ mg/L} of HX2SOX4\ce{H2SO4} (98.08 g/mol98.08\text{ g/mol}). If slaked lime containing 90.0% Ca(OH)290.0\%\text{ Ca(OH)2} by mass (74.09 g/mol74.09\text{ g/mol}) is used for complete neutralization (reaction: HX2SOX4+Ca(OH)X2→CaSOX4+2 HX2O\ce{H2SO4 + Ca(OH)2 -> CaSO4 + 2H2O}), what total mass of the impure slaked lime (in grams) must be added?

Answer
  1. Mass of HX2SOX4\ce{H2SO4}: 245.2 mg/L×12000 L×10−3 g/mg=2942.4 g245.2\text{ mg/L} \times 12000\text{ L} \times 10^{-3}\text{ g/mg} = 2942.4\text{ g}.\n2. Moles of HX2SOX4\ce{H2SO4}: 2942.4 g98.08 g/mol≈30.00 mol\frac{2942.4\text{ g}}{98.08\text{ g/mol}} \approx 30.00\text{ mol}.\n3. Moles of pure Ca(OH)X2\ce{Ca(OH)2} needed (1:11:1 ratio): 30.00 mol30.00\text{ mol}.\n4. Mass of pure Ca(OH)X2\ce{Ca(OH)2}: 30.00 mol×74.09 g/mol≈2222.7 g30.00\text{ mol} \times 74.09\text{ g/mol} \approx 2222.7\text{ g}.\n5. Account for 90.0%90.0\% purity: Total slaked lime=2222.7 g0.900≈2.47×103 g\text{Total slaked lime} = \frac{2222.7\text{ g}}{0.900} \approx 2.47 \times 10^3\text{ g} (or 2470 g2470\text{ g}).
Loading workspace…