Resources

A municipal water quality technician measures the alkalinity of a reservoir by titrating a 100.0 mL100.0\text{ mL} water sample containing dissolved calcium hydroxide ([Ca(OH)2][\text{Ca(OH)}_2]). The titration requires 18.40 mL18.40\text{ mL} of 0.0250 M0.0250\text{ M} hydrochloric acid (HCl\text{HCl}) to reach the equivalence point. Calculate the concentration of Ca(OH)2\text{Ca(OH)}_2 in the reservoir expressed in parts per million (ppm\text{ppm}, defined as mg/L\text{mg/L}), assuming the solution density is 1.00 g/mL1.00\text{ g/mL}. The molar mass of Ca(OH)2\text{Ca(OH)}_2 is 74.09 g/mol74.09\text{ g/mol}.

Answer and steps

Final answer

170 ppm170\text{ ppm}

Steps

01

Write the balanced chemical equation

To find the concentration of dissolved calcium hydroxide (Ca(OH)X2\ce{Ca(OH)2}) in parts per million (ppm\text{ppm}, or mg/L\text{mg/L}), we use the stoichiometry of the neutralization reaction.

Hydrochloric acid (HCl\ce{HCl}) neutralizes calcium hydroxide (Ca(OH)X2\ce{Ca(OH)2}) according to:

Ca(OH)X2(aq)+2 HCl(aq)→CaClX2(aq)+2 HX2O(l)\ce{Ca(OH)2(aq) + 2HCl(aq) -> CaCl2(aq) + 2H2O(l)}

From the balanced equation, 1 mole1\text{ mole} of Ca(OH)X2\ce{Ca(OH)2} reacts with 2 moles2\text{ moles} of HCl\ce{HCl}.

02

Calculate moles of HCl\ce{HCl} consumed

Using the volume and molarity of the acid used to reach the equivalence point:

VHCl=18.40 mL=0.01840 LV_{\ce{HCl}} = 18.40\text{ mL} = 0.01840\text{ L}

nHCl=MHCl⋅VHCl=(0.0250 mol/L)⋅(0.01840 L)=4.60×10−4 moln_{\ce{HCl}} = M_{\ce{HCl}} \cdot V_{\ce{HCl}} = (0.0250\text{ mol/L}) \cdot (0.01840\text{ L}) = 4.60 \times 10^{-4}\text{ mol}

03

Determine moles and mass of Ca(OH)X2\ce{Ca(OH)2}

Apply the stoichiometric mole ratio (1 mol Ca(OH)X2:2 mol HCl1\text{ mol }\ce{Ca(OH)2} : 2\text{ mol }\ce{HCl}):

nCa(OH)X2=nHCl2=4.60×10−4 mol2=2.30×10−4 moln_{\ce{Ca(OH)2}} = \frac{n_{\ce{HCl}}}{2} = \frac{4.60 \times 10^{-4}\text{ mol}}{2} = 2.30 \times 10^{-4}\text{ mol}

Common Pitfall: Forgetting the 1:21:2 stoichiometric ratio is a frequent mistake. Because Ca(OH)X2\ce{Ca(OH)2} furnishes two hydroxide ions (OHX−\ce{OH-}), each mole of base neutralizes two moles of monoprotic acid (HCl\ce{HCl}).

Now, convert moles of Ca(OH)X2\ce{Ca(OH)2} into mass in milligrams (mg\text{mg}):

mCa(OH)X2=nCa(OH)X2⋅Mmolar=(2.30×10−4 mol)⋅(74.09 g/mol)=0.01704 g=17.04 mgm_{\ce{Ca(OH)2}} = n_{\ce{Ca(OH)2}} \cdot M_{\text{molar}} = (2.30 \times 10^{-4}\text{ mol}) \cdot (74.09\text{ g/mol}) = 0.01704\text{ g} = 17.04\text{ mg}

04

Calculate the concentration in ppm\text{ppm} (mg/L\text{mg/L})

Convert the sample volume to liters:

Vsample=100.0 mL=0.1000 LV_{\text{sample}} = 100.0\text{ mL} = 0.1000\text{ L}

For an aqueous solution with a density of 1.00 g/mL1.00\text{ g/mL}, 1 ppm=1 mg/L1\text{ ppm} = 1\text{ mg/L}:

Concentration=17.04 mg0.1000 L=170.4 mg/L≈170 ppm\text{Concentration} = \frac{17.04\text{ mg}}{0.1000\text{ L}} = 170.4\text{ mg/L} \approx 170\text{ ppm}

Rounded to three significant figures, the concentration is 170 ppm170\text{ ppm}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets the 1:2 stoichiometry of Ca(OH)2 to HCl and assumes an equimolar 1:1 reaction ratio, leading to a calculated concentration that is twice the true value.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    moles HCl=0.01840 L×0.0250 M=0.000460 mol\text{moles HCl} = 0.01840\text{ L} \times 0.0250\text{ M} = 0.000460\text{ mol}

  2. Step 2

    Ca(OH)X2+HCl→products, so 1:1 ratio  ⟹  moles Ca(OH)X2=0.000460 mol\ce{Ca(OH)2 + HCl -> \text{products}}\text{, so } 1:1\text{ ratio} \implies \text{moles }\ce{Ca(OH)2} = 0.000460\text{ mol}

    Correct

    Ca(OH)X2+2 HCl→CaClX2+2 HX2O  ⟹  nCa(OH)X2=nHCl2=2.30×10−4 mol\ce{Ca(OH)2 + 2HCl -> CaCl2 + 2H2O} \implies n_{\ce{Ca(OH)2}} = \frac{n_{\ce{HCl}}}{2} = 2.30 \times 10^{-4}\text{ mol}

    You assumed a 1:11:1 reaction ratio, but calcium hydroxide is a dihydroxy base that furnishes two OHX−\ce{OH-} ions per formula unit. Neutralizing one mole of Ca(OH)X2\ce{Ca(OH)2} requires two moles of monoprotic HCl\ce{HCl}.

  3. Step 3

    mass Ca(OH)X2=0.000460 mol×74.09 g/mol=0.03408 g=34.08 mg\text{mass }\ce{Ca(OH)2} = 0.000460\text{ mol} \times 74.09\text{ g/mol} = 0.03408\text{ g} = 34.08\text{ mg}

    Correct

    mCa(OH)X2=2.30×10−4 mol×74.09 g/mol=0.01704 g=17.04 mgm_{\ce{Ca(OH)2}} = 2.30 \times 10^{-4}\text{ mol} \times 74.09\text{ g/mol} = 0.01704\text{ g} = 17.04\text{ mg}

    Your molar mass calculation and conversion to milligrams were mathematically sound, but this step inherits twice the true mole quantity from Step 2.

  4. Step 4

    Concentration=34.08 mg0.1000 L=340.8 ppm\text{Concentration} = \frac{34.08\text{ mg}}{0.1000\text{ L}} = 340.8\text{ ppm}

    Correct

    Concentration=17.04 mg0.1000 L=170.4 mg/L≈170 ppm\text{Concentration} = \frac{17.04\text{ mg}}{0.1000\text{ L}} = 170.4\text{ mg/L} \approx 170\text{ ppm}

    You correctly converted the 100.0 mL100.0\text{ mL} sample to liters and divided mg\text{mg} by L\text{L} to get ppm\text{ppm}, but the value is double the correct result due to the stoichiometry error in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the moles of hydrochloric acid from volume and molarity accurately.

You converted grams to milligrams and milliliters to liters correctly.

You correctly related mg/L\text{mg/L} directly to parts per million (ppm\text{ppm}) for an aqueous solution.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometry mole-ratio error in acid-base neutralization

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You bypassed balancing the full neutralization equation and defaulted to an equimolar (1:11:1) reaction, overlooking that each formula unit of Ca(OH)X2\ce{Ca(OH)2} releases two hydroxide ions (OHX−\ce{OH-}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Balance before calculating
  • Every acid-base titration calculation must begin with a balanced molecular equation to account for polyprotic acids or polyhydroxy bases.

  • Always write out Ca(OH)X2+2 HCl→CaClX2+2 HX2O\ce{Ca(OH)2 + 2HCl -> CaCl2 + 2H2O} and verify the HX+:OHX−\ce{H+}:\ce{OH-} balance before setting up mole ratios.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Balance the reaction: Ca(OH)X2(aq)+2 HCl(aq)→CaClX2(aq)+2 HX2O(l)\ce{Ca(OH)2(aq) + 2HCl(aq) -> CaCl2(aq) + 2H2O(l)}.

  2. Calculate base moles using the 1:21:2 mole ratio: nCa(OH)X2=4.60×10−4 mol2=2.30×10−4 moln_{\ce{Ca(OH)2}} = \frac{4.60 \times 10^{-4}\text{ mol}}{2} = 2.30 \times 10^{-4}\text{ mol}.

  3. Find mass of base: mCa(OH)X2=(2.30×10−4 mol)×(74.09 g/mol)=0.01704 g=17.04 mgm_{\ce{Ca(OH)2}} = (2.30 \times 10^{-4}\text{ mol}) \times (74.09\text{ g/mol}) = 0.01704\text{ g} = 17.04\text{ mg}.

  4. Divide by sample volume (0.1000 L0.1000\text{ L}): 17.04 mg0.1000 L=170.4 ppm≈170 ppm\frac{17.04\text{ mg}}{0.1000\text{ L}} = 170.4\text{ ppm} \approx 170\text{ ppm} (3 significant figures).

Final answer

170 ppm170\text{ ppm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice identifying polyprotic acids (like HX2SOX4\ce{H2SO4}, HX3POX4\ce{H3PO4}) and polyhydroxy bases (like Ca(OH)X2\ce{Ca(OH)2}, Ba(OH)X2\ce{Ba(OH)2}, Al(OH)X3\ce{Al(OH)3}) before starting any titration calculation.

  • Write out the full balanced chemical equation as Step 1 of your titration protocol every time.

OverviewACEpath Teacher's Diagnosis

02 The student multiplies by the stoichiometric factor of 2 instead of dividing by 2 when converting moles of HCl to moles of Ca(OH)2, resulting in an answer four times larger than correct.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Ca(OH)X2+2 HCl→CaClX2+2 HX2O\ce{Ca(OH)2 + 2HCl -> CaCl2 + 2H2O}

  2. Step 2

    moles HCl=0.01840 L×0.0250 M=0.000460 mol\text{moles HCl} = 0.01840\text{ L} \times 0.0250\text{ M} = 0.000460\text{ mol}

  3. Step 3

    moles Ca(OH)2=0.000460 mol×2=0.000920 mol\text{moles Ca(OH)}_2 = 0.000460\text{ mol} \times 2 = 0.000920\text{ mol}

    Correct

    nCa(OH)X2=4.60×10−4 mol HCl×1 mol Ca(OH)X22 mol HCl=2.30×10−4 moln_{\ce{Ca(OH)2}} = 4.60 \times 10^{-4}\text{ mol }\ce{HCl} \times \frac{1\text{ mol }\ce{Ca(OH)2}}{2\text{ mol }\ce{HCl}} = 2.30 \times 10^{-4}\text{ mol}

    Because 1 mol1\text{ mol} of Ca(OH)X2\ce{Ca(OH)2} reacts with 2 mol2\text{ mol} of HCl\ce{HCl}, the moles of Ca(OH)X2\ce{Ca(OH)2} should be half the moles of HCl\ce{HCl}, not twice.

  4. Step 4

    mass Ca(OH)2=0.000920 mol×74.09 g/mol=0.06816 g=68.16 mg\text{mass Ca(OH)}_2 = 0.000920\text{ mol} \times 74.09\text{ g/mol} = 0.06816\text{ g} = 68.16\text{ mg}

    Correct

    mCa(OH)X2=2.30×10−4 mol×74.09 g/mol=0.01704 g=17.04 mgm_{\ce{Ca(OH)2}} = 2.30 \times 10^{-4}\text{ mol} \times 74.09\text{ g/mol} = 0.01704\text{ g} = 17.04\text{ mg}

    Your molar mass calculation and unit conversion to milligrams were methodologically sound, but carried forward the incorrect mole quantity.

  5. Step 5

    Concentration=68.16 mg/0.1000 L=681.6 ppm\text{Concentration} = 68.16\text{ mg} / 0.1000\text{ L} = 681.6\text{ ppm}

    Correct

    Concentration=17.04 mg0.1000 L=170.4 mg/L≈170 ppm\text{Concentration} = \frac{17.04\text{ mg}}{0.1000\text{ L}} = 170.4\text{ mg/L} \approx 170\text{ ppm}

    Your division by sample volume in liters to find ppm\text{ppm} (mg/L\text{mg/L}) was set up correctly, but the result was four times too large due to the earlier stoichiometry error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly wrote and balanced the chemical equation for the neutralization reaction.

You accurately calculated the moles of HCl\ce{HCl} from its volume and molarity.

You converted grams to milligrams and calculated parts per million using the correct mg/L\text{mg/L} relationship.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometric Ratio Inversion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You inverted the mole ratio conversion factor, placing 2 mol HCl2\text{ mol }\ce{HCl} in the denominator conceptually but multiplying by 22 instead of dividing by 22.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis with Mole Ratios
  • Always write out units and substance formulas in stoichiometric ratios: mol given×coefficient desiredcoefficient given=mol desired\text{mol given} \times \frac{\text{coefficient desired}}{\text{coefficient given}} = \text{mol desired}.

  • Set up the conversion explicitly with canceling units: nCa(OH)X2=nHCl×1 mol Ca(OH)X22 mol HCln_{\ce{Ca(OH)2}} = n_{\ce{HCl}} \times \frac{1\text{ mol }\ce{Ca(OH)2}}{2\text{ mol }\ce{HCl}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. nCa(OH)X2=4.60×10−4 mol HCl×1 mol Ca(OH)X22 mol HCl=2.30×10−4 moln_{\ce{Ca(OH)2}} = 4.60 \times 10^{-4}\text{ mol }\ce{HCl} \times \frac{1\text{ mol }\ce{Ca(OH)2}}{2\text{ mol }\ce{HCl}} = 2.30 \times 10^{-4}\text{ mol}

  2. mCa(OH)X2=2.30×10−4 mol×74.09 g/mol=0.01704 g=17.04 mgm_{\ce{Ca(OH)2}} = 2.30 \times 10^{-4}\text{ mol} \times 74.09\text{ g/mol} = 0.01704\text{ g} = 17.04\text{ mg}

  3. Concentration=17.04 mg0.1000 L=170.4 mg/L≈170 ppm\text{Concentration} = \frac{17.04\text{ mg}}{0.1000\text{ L}} = 170.4\text{ mg/L} \approx 170\text{ ppm}

Final answer

170 ppm170\text{ ppm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write full unit labels (such as mol HCl\text{mol }\ce{HCl} and mol Ca(OH)X2\text{mol }\ce{Ca(OH)2}) on every conversion factor so units physically cancel.

  • Perform a sanity check: since each Ca(OH)X2\ce{Ca(OH)2} neutralizes two HCl\ce{HCl} molecules, there must be fewer moles of base than acid present.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to convert the 100.0 mL sample volume into liters when dividing by volume to calculate mg/L, resulting in a concentration that is a factor of 1000 too small.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Ca(OH)X2+2 HCl→CaClX2+2 HX2O\ce{Ca(OH)2 + 2HCl -> CaCl2 + 2H2O}

  2. Step 2

    moles HCl=0.01840 L×0.0250 M  ⟹  0.000460 mol\text{moles HCl} = 0.01840\text{ L} \times 0.0250\text{ M} \implies 0.000460\text{ mol}

  3. Step 3

    moles Ca(OH)2=0.000460 mol/2  ⟹  0.000230 mol\text{moles Ca(OH)}_2 = 0.000460\text{ mol} / 2 \implies 0.000230\text{ mol}

  4. Step 4

    mass Ca(OH)2=0.000230 mol×74.09 g/mol  ⟹  0.01704 g=17.04 mg\text{mass Ca(OH)}_2 = 0.000230\text{ mol} \times 74.09\text{ g/mol} \implies 0.01704\text{ g} = 17.04\text{ mg}

  5. Step 5

    Concentration=17.04 mg/100.0 mL  ⟹  0.1704 ppm\text{Concentration} = 17.04\text{ mg} / 100.0\text{ mL} \implies 0.1704\text{ ppm}

    Correct

    Concentration=17.04 mg0.1000 L=170.4 mg/L≈170 ppm\text{Concentration} = \frac{17.04\text{ mg}}{0.1000\text{ L}} = 170.4\text{ mg/L} \approx 170\text{ ppm}

    Parts per million (ppm\text{ppm}) for an aqueous solution is defined as milligrams of solute per liter of solution (mg/L\text{mg/L}). You divided by 100.0 mL100.0\text{ mL} directly without converting the volume to 0.1000 L0.1000\text{ L}, which yielded mg/mL\text{mg/mL} and understated the concentration by a factor of 10001000.

WHAT YOU DID WELL
Compliments from Your Teacher

You wrote the correct balanced chemical equation with the appropriate 1:21:2 stoichiometric ratio.

You calculated the moles of hydrochloric acid titrant accurately.

You properly converted the moles of calcium hydroxide to mass in milligrams.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Error in ppm Definition

You divided milligrams by milliliters instead of converting the solution volume to liters.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking that parts per million (ppm\text{ppm}) in dilute aqueous solutions corresponds to mg/L\text{mg/L}, not mg/mL\text{mg/mL}. Because 1 L=1000 mL≈1 kg=106 mg1\text{ L} = 1000\text{ mL} \approx 1\text{ kg} = 10^6\text{ mg} of water, dividing by volume in milliliters yields mg/mL\text{mg/mL} (which is parts per thousand, or ppt\text{ppt}), rather than parts per million.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define ppm for Dilute Aqueous Solutions
  • 1 ppm=1 mg solute/1 L solution1\text{ ppm} = 1\text{ mg solute} / 1\text{ L solution} (for ρ=1.00 g/mL\rho = 1.00\text{ g/mL}).

  • Whenever an answer requires ppm\text{ppm}, immediately write out the unit target as mgL\frac{\text{mg}}{\text{L}} so you remember to express the denominator in liters.

Verify Denominator Units Before Dividing
  • V (in L)=V (in mL)1000 mL/LV\text{ (in L)} = \frac{V\text{ (in mL)}}{1000\text{ mL/L}}.

  • Convert the aliquot volume (here, 100.0 mL=0.1000 L100.0\text{ mL} = 0.1000\text{ L}) before setting up the final concentration quotient.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the reservoir sample volume from milliliters to liters: Vsample=100.0 mL×1 L1000 mL=0.1000 LV_{\text{sample}} = 100.0\text{ mL} \times \frac{1\text{ L}}{1000\text{ mL}} = 0.1000\text{ L}.

  2. Divide the solute mass in milligrams by the solution volume in liters: Concentration=17.04 mg0.1000 L=170.4 mg/L\text{Concentration} = \frac{17.04\text{ mg}}{0.1000\text{ L}} = 170.4\text{ mg/L}.

  3. Round to three significant figures to match the given data: 170 ppm170\text{ ppm}.

Final answer

170 ppm170\text{ ppm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the definition of parts per million (ppm=mg/L\text{ppm} = \text{mg/L}) and parts per billion (ppb=μg/L\text{ppb} = \mu\text{g/L}) for aqueous solutions.

  • Practice tracking units explicitly through dimensional analysis on the final step rather than dropping units during division.

Lock it in

Similar question

01

A 50.0 mL50.0\text{ mL} sample of saturated Ba(OH)X2\ce{Ba(OH)2} solution requires 24.00 mL24.00\text{ mL} of 0.0500 M HCl0.0500\text{ M}\text{ HCl} to reach the endpoint. Calculate the molarity of the Ba(OH)X2\ce{Ba(OH)2} solution.

Answer

0.0120 M0.0120\text{ M}. Key steps: nHCl=0.02400 L×0.0500 M=1.20×10−3 moln_{\ce{HCl}} = 0.02400\text{ L} \times 0.0500\text{ M} = 1.20 \times 10^{-3}\text{ mol}. The reaction is Ba(OH)X2+2 HCl→BaClX2+2 HX2O\ce{Ba(OH)2 + 2HCl -> BaCl2 + 2H2O}, so nBa(OH)X2=1.20×10−3 mol2=6.00×10−4 moln_{\ce{Ba(OH)2}} = \frac{1.20 \times 10^{-3}\text{ mol}}{2} = 6.00 \times 10^{-4}\text{ mol}. Molarity = 6.00×10−4 mol0.0500 L=0.0120 M\frac{6.00 \times 10^{-4}\text{ mol}}{0.0500\text{ L}} = 0.0120\text{ M}.

02

A 250.0 mL250.0\text{ mL} industrial wastewater sample containing dissolved Ca(OH)X2\ce{Ca(OH)2} requires 30.00 mL30.00\text{ mL} of 0.0400 M HNO30.0400\text{ M}\text{ HNO3} to reach equivalence. What is the concentration of Ca(OH)X2\ce{Ca(OH)2} in ppm\text{ppm} (assume density is 1.00 g/mL1.00\text{ g/mL}, molar mass of Ca(OH)X2=74.09 g/mol\ce{Ca(OH)2} = 74.09\text{ g/mol})?

Answer

178 ppm178\text{ ppm}. Key steps: nHNOX3=0.03000 L×0.0400 M=1.20×10−3 moln_{\ce{HNO3}} = 0.03000\text{ L} \times 0.0400\text{ M} = 1.20 \times 10^{-3}\text{ mol}. By 1:21:2 stoichiometry, nCa(OH)X2=6.00×10−4 moln_{\ce{Ca(OH)2}} = 6.00 \times 10^{-4}\text{ mol}. Mass = 6.00×10−4 mol×74.09 g/mol=0.04445 g=44.45 mg6.00 \times 10^{-4}\text{ mol} \times 74.09\text{ g/mol} = 0.04445\text{ g} = 44.45\text{ mg}. Concentration = 44.45 mg0.2500 L=177.8 mg/L≈178 ppm\frac{44.45\text{ mg}}{0.2500\text{ L}} = 177.8\text{ mg/L} \approx 178\text{ ppm}.

03

A chemist neutralizes a 75.0 mL75.0\text{ mL} sample of sulfuric acid (HX2SOX4\ce{H2SO4}) using 22.50 mL22.50\text{ mL} of 0.100 M NaOH0.100\text{ M}\text{ NaOH}. Find the concentration of HX2SOX4\ce{H2SO4} in grams per liter (g/L\text{g/L}). (Molar mass of HX2SOX4=98.08 g/mol\ce{H2SO4} = 98.08\text{ g/mol}).

Answer

1.47 g/L1.47\text{ g/L}. Key steps: nNaOH=0.02250 L×0.100 M=2.25×10−3 moln_{\ce{NaOH}} = 0.02250\text{ L} \times 0.100\text{ M} = 2.25 \times 10^{-3}\text{ mol}. The balanced equation is HX2SOX4+2 NaOH→NaX2SOX4+2 HX2O\ce{H2SO4 + 2NaOH -> Na2SO4 + 2H2O}, so nHX2SOX4=2.25×10−3 mol2=1.125×10−3 moln_{\ce{H2SO4}} = \frac{2.25 \times 10^{-3}\text{ mol}}{2} = 1.125 \times 10^{-3}\text{ mol}. Mass = 1.125×10−3 mol×98.08 g/mol=0.1103 g1.125 \times 10^{-3}\text{ mol} \times 98.08\text{ g/mol} = 0.1103\text{ g}. Concentration = 0.1103 g0.0750 L=1.47 g/L\frac{0.1103\text{ g}}{0.0750\text{ L}} = 1.47\text{ g/L}.

Loading workspace…