Resources

For the generalized redox reaction 2Fe3+(aq)+Sn2+(aq)→2Fe2+(aq)+Sn4+(aq)2\text{Fe}^{3+}(aq) + \text{Sn}^{2+}(aq) \rightarrow 2\text{Fe}^{2+}(aq) + \text{Sn}^{4+}(aq), a student monitors concentration changes over a 25.0 s25.0\text{ s} interval and records Δ[Fe3+]=[Fe3+]25−[Fe3+]0=−0.0750 M\Delta[\text{Fe}^{3+}] = [\text{Fe}^{3+}]_{25} - [\text{Fe}^{3+}]_0 = -0.0750\text{ M}. By standard IUPAC convention, the rate of a chemical reaction is strictly non-negative: Rate=−1aΔ[A]Δt=+1bΔ[B]Δt\text{Rate} = -\frac{1}{a}\frac{\Delta[A]}{\Delta t} = +\frac{1}{b}\frac{\Delta[B]}{\Delta t}. State: (a) the sign and numerical value of the raw mathematical derivative Δ[Fe3+]Δt\frac{\Delta[\text{Fe}^{3+}]}{\Delta t}, (b) the rate of consumption of Fe3+\text{Fe}^{3+}, and (c) the overall unique reaction rate and corresponding rate of formation Δ[Sn4+]Δt\frac{\Delta[\text{Sn}^{4+}]}{\Delta t}.

Answer and steps

Final answer

(a) Δ[Fe3+]Δt=−3.00×10−3 M⋅s−1\frac{\Delta[\text{Fe}^{3+}]}{\Delta t} = -3.00 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}; (b) −Δ[Fe3+]Δt=3.00×10−3 M⋅s−1-\frac{\Delta[\text{Fe}^{3+}]}{\Delta t} = 3.00 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}; (c) Rate=Δ[Sn4+]Δt=1.50×10−3 M⋅s−1\text{Rate} = \frac{\Delta[\text{Sn}^{4+}]}{\Delta t} = 1.50 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}

Steps

01

Calculate the Raw Mathematical Rate of Change of FeX3+\ce{Fe^{3+}}

The raw time rate of change of concentration is given directly by the ratio of the change in concentration, Δ[FeX3+]\Delta[\ce{Fe^{3+}}], to the time elapsed, Δt\Delta t:

Δ[FeX3+]Δt=−0.0750 M25.0 s=−3.00×10−3 M⋅s−1\frac{\Delta[\ce{Fe^{3+}}]}{\Delta t} = \frac{-0.0750\text{ M}}{25.0\text{ s}} = -3.00 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}

Because FeX3+\ce{Fe^{3+}} is a reactant and is being consumed, its concentration decreases over time, giving this derivative a negative sign.


02

Determine the Rate of Consumption of FeX3+\ce{Fe^{3+}}

By chemical convention, rates of consumption and rates of reaction are defined as positive quantities. The rate of consumption (disappearance) is defined as the negative of the reactant's rate of change:

Rate of consumption of FeX3+=−Δ[FeX3+]Δt=−(−3.00×10−3 M⋅s−1)=3.00×10−3 M⋅s−1\text{Rate of consumption of }\ce{Fe^{3+}} = -\frac{\Delta[\ce{Fe^{3+}}]}{\Delta t} = -(-3.00 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}) = 3.00 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}


03

Determine the Unique Reaction Rate and Rate of Formation of SnX4+\ce{Sn^{4+}}

For the general balanced equation: 2FeX3+(aq)+SnX2+(aq)→2FeX2+(aq)+SnX4+(aq)2\ce{Fe^{3+}}(aq) + \ce{Sn^{2+}}(aq) \rightarrow 2\ce{Fe^{2+}}(aq) + \ce{Sn^{4+}}(aq)

The unique reaction rate accounts for stoichiometry by dividing each species' rate of change by its stoichiometric coefficient (with a negative sign for reactants):

Rate=−12Δ[FeX3+]Δt=−11Δ[SnX2+]Δt=+12Δ[FeX2+]Δt=+11Δ[SnX4+]Δt\text{Rate} = -\frac{1}{2}\frac{\Delta[\ce{Fe^{3+}}]}{\Delta t} = -\frac{1}{1}\frac{\Delta[\ce{Sn^{2+}}]}{\Delta t} = +\frac{1}{2}\frac{\Delta[\ce{Fe^{2+}}]}{\Delta t} = +\frac{1}{1}\frac{\Delta[\ce{Sn^{4+}}]}{\Delta t}

Using the rate of consumption of FeX3+\ce{Fe^{3+}}:

Rate=−12(−3.00×10−3 M⋅s−1)=1.50×10−3 M⋅s−1\text{Rate} = -\frac{1}{2}(-3.00 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}) = 1.50 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}

Since the stoichiometric coefficient of SnX4+\ce{Sn^{4+}} is 11, its rate of formation is directly equal to the unique reaction rate:

Δ[SnX4+]Δt=Rate=1.50×10−3 M⋅s−1\frac{\Delta[\ce{Sn^{4+}}]}{\Delta t} = \text{Rate} = 1.50 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to divide by the stoichiometric coefficient of Fe³⁺ (2) when calculating the overall reaction rate.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δ[FeX3+]Δt=−0.0750 M/25.0 s  ⟹  Δ[FeX3+]Δt=−0.00300 M/s\frac{\Delta[\ce{Fe^{3+}}]}{\Delta t} = -0.0750\text{ M} / 25.0\text{ s} \implies \frac{\Delta[\ce{Fe^{3+}}]}{\Delta t} = -0.00300\text{ M/s}

  2. Step 2

    Rate of consumption=−Δ[FeX3+]Δt  ⟹  Rate of consumption=0.00300 M/s\text{Rate of consumption} = \frac{-\Delta[\ce{Fe^{3+}}]}{\Delta t} \implies \text{Rate of consumption} = 0.00300\text{ M/s}

  3. Step 3

    Reaction rate=−Δ[FeX3+]Δt=0.00300 M/s\text{Reaction rate} = \frac{-\Delta[\ce{Fe^{3+}}]}{\Delta t} = 0.00300\text{ M/s}

    Correct

    Rate=−12Δ[FeX3+]Δt=12(3.00×10−3 M⋅s−1)=1.50×10−3 M⋅s−1\text{Rate} = -\frac{1}{2}\frac{\Delta[\ce{Fe^{3+}}]}{\Delta t} = \frac{1}{2}(3.00 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}) = 1.50 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}

    You omitted the stoichiometric coefficient of 22 for FeX3+\ce{Fe^{3+}}. The unique reaction rate divides each species' rate of change by its balanced stoichiometric coefficient: Rate=−12Δ[FeX3+]Δt\text{Rate} = -\frac{1}{2}\frac{\Delta[\ce{Fe^{3+}}]}{\Delta t}.

  4. Step 4

    Δ[SnX4+]Δt=Reaction rate=0.00300 M/s\frac{\Delta[\ce{Sn^{4+}}]}{\Delta t} = \text{Reaction rate} = 0.00300\text{ M/s}

    Correct

    Δ[SnX4+]Δt=+11Rate=1.50×10−3 M⋅s−1\frac{\Delta[\ce{Sn^{4+}}]}{\Delta t} = +\frac{1}{1}\text{Rate} = 1.50 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}

    Your reasoning that Δ[SnX4+]Δt=Reaction rate\frac{\Delta[\ce{Sn^{4+}}]}{\Delta t} = \text{Reaction rate} is correct because SnX4+\ce{Sn^{4+}} has a stoichiometric coefficient of 11, but your numerical value was affected by the error in Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the raw time rate of change Δ[FeX3+]Δt\frac{\Delta[\ce{Fe^{3+}}]}{\Delta t} accurately with the proper negative sign.

You recognized that consumption rates must be reported as positive quantities.

You correctly understood that the formation rate of a species with coefficient 11 equals the overall reaction rate.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Stoichiometric Coefficient in Reaction Rate

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the rate of disappearance of an individual reactant (−Δ[FeX3+]Δt-\frac{\Delta[\ce{Fe^{3+}}]}{\Delta t}) with the generalized unique reaction rate, forgetting that the overall reaction rate requires dividing by the species' stoichiometric coefficient (a=2a = 2).

REASONING PATH
Your ACEpath teacher’s suggested approach
Stoichiometric Rate Definition
  • For reaction aA+bB→cC+dDa\ce{A} + b\ce{B} \rightarrow c\ce{C} + d\ce{D}, Rate=−1aΔ[A]Δt=+1cΔ[C]Δt\text{Rate} = -\frac{1}{a}\frac{\Delta[\ce{A}]}{\Delta t} = +\frac{1}{c}\frac{\Delta[\ce{C}]}{\Delta t}.

  • Always divide the rate of consumption or formation of any species by its balanced stoichiometric coefficient when calculating the unique reaction rate.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Rate=−12Δ[FeX3+]Δt=12(3.00×10−3 M⋅s−1)=1.50×10−3 M⋅s−1\text{Rate} = -\frac{1}{2}\frac{\Delta[\ce{Fe^{3+}}]}{\Delta t} = \frac{1}{2}(3.00 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}) = 1.50 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}

  2. Δ[SnX4+]Δt=+11Rate=1.50×10−3 M⋅s−1\frac{\Delta[\ce{Sn^{4+}}]}{\Delta t} = +\frac{1}{1}\text{Rate} = 1.50 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}

Final answer

(a) Δ[FeX3+]Δt=−3.00×10−3 M⋅s−1\frac{\Delta[\ce{Fe^{3+}}]}{\Delta t} = -3.00 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}; (b) −Δ[FeX3+]Δt=3.00×10−3 M⋅s−1-\frac{\Delta[\ce{Fe^{3+}}]}{\Delta t} = 3.00 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}; (c) Rate=Δ[SnX4+]Δt=1.50×10−3 M⋅s−1\text{Rate} = \frac{\Delta[\ce{Sn^{4+}}]}{\Delta t} = 1.50 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the full equivalence string for the balanced reaction before inserting numbers: Rate=−12Δ[FeX3+]Δt=−Δ[SnX2+]Δt=+12Δ[FeX2+]Δt=+Δ[SnX4+]Δt\text{Rate} = -\frac{1}{2}\frac{\Delta[\ce{Fe^{3+}}]}{\Delta t} = -\frac{\Delta[\ce{Sn^{2+}}]}{\Delta t} = +\frac{1}{2}\frac{\Delta[\ce{Fe^{2+}}]}{\Delta t} = +\frac{\Delta[\ce{Sn^{4+}}]}{\Delta t}.

  • Practice distinguishing between species-specific rates (e.g., rate of disappearance of reactant A\ce{A}) and the overall unique reaction rate.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets the rate of consumption as a negative value, confusing the rate of consumption with the negative derivative Δ[Fe³⁺]/Δt.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δ[Fe3+]Δt=−0.0750 M25.0 s=−0.00300 M/s\frac{\Delta[\text{Fe}^{3+}]}{\Delta t} = \frac{-0.0750\text{ M}}{25.0\text{ s}} = -0.00300\text{ M/s}

  2. Step 2

    Rate of consumption=Δ[Fe3+]Δt  ⟹  Rate of consumption=−0.00300 M/s\text{Rate of consumption} = \frac{\Delta[\text{Fe}^{3+}]}{\Delta t} \implies \text{Rate of consumption} = -0.00300\text{ M/s}

    Correct

    −Δ[Fe3+]Δt=−(−0.00300 M/s)=3.00×10−3 M⋅s−1-\frac{\Delta[\text{Fe}^{3+}]}{\Delta t} = -(-0.00300\text{ M/s}) = 3.00 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}

    By IUPAC chemical convention, rates of consumption and formation are strictly non-negative quantities. The rate of consumption of a reactant is defined with an explicit negative sign: −Δ[Reactant]Δt-\frac{\Delta[\text{Reactant}]}{\Delta t}.

  3. Step 3

    Reaction rate=−(12)(−0.00300 M/s)=0.00150 M/s  ⟹  Δ[Sn4+]Δt=0.00150 M/s\text{Reaction rate} = -\left(\frac{1}{2}\right)(-0.00300\text{ M/s}) = 0.00150\text{ M/s} \implies \frac{\Delta[\text{Sn}^{4+}]}{\Delta t} = 0.00150\text{ M/s}

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately calculated the raw rate of change of concentration including its negative sign.

You correctly used the stoichiometric coefficient of 22 to relate the reactant rate of change to the overall reaction rate.

You correctly recognized that the formation rate of Sn4+\text{Sn}^{4+} matches the overall reaction rate.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention confusion for consumption rate

You equated the rate of consumption directly to Δ[Fe3+]Δt\frac{\Delta[\text{Fe}^{3+}]}{\Delta t} without negating it.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the raw mathematical derivative of a reactant's concentration over time (which is negative because the concentration decreases) with the chemical rate of consumption (which is defined as a non-negative rate of disappearance, −Δ[R]Δt-\frac{\Delta[\text{R}]}{\Delta t}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Mathematical Derivative vs. Chemical Rate
  • For any reactant RR, Δ[R]Δt<0\frac{\Delta[R]}{\Delta t} < 0, but Rate of consumption=−Δ[R]Δt>0\text{Rate of consumption} = -\frac{\Delta[R]}{\Delta t} > 0.

  • Always insert a negative sign when converting a reactant's concentration change into a rate of consumption or disappearance.

Strict Positivity of Chemical Rates
  • Reaction rates, consumption rates, and formation rates are scalar speeds of reaction and must never be reported as negative values.

  • Check your final stated rate: if it has a minus sign, you are looking at a raw derivative, not a chemical rate.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall that consumption means disappearance: Rate of consumption of Fe3+=−Δ[Fe3+]Δt\text{Rate of consumption of }\text{Fe}^{3+} = -\frac{\Delta[\text{Fe}^{3+}]}{\Delta t}.

  2. Substitute the raw derivative: −(−0.00300 M⋅s−1)=+0.00300 M⋅s−1=3.00×10−3 M⋅s−1-(-0.00300\text{ M}\cdot\text{s}^{-1}) = +0.00300\text{ M}\cdot\text{s}^{-1} = 3.00 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}.

Final answer

(a) Δ[Fe3+]Δt=−3.00×10−3 M⋅s−1\frac{\Delta[\text{Fe}^{3+}]}{\Delta t} = -3.00 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}; (b) −Δ[Fe3+]Δt=3.00×10−3 M⋅s−1-\frac{\Delta[\text{Fe}^{3+}]}{\Delta t} = 3.00 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}; (c) Rate=Δ[Sn4+]Δt=1.50×10−3 M⋅s−1\text{Rate} = \frac{\Delta[\text{Sn}^{4+}]}{\Delta t} = 1.50 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between a slope on a [R] vs. t[R]\text{ vs. }t graph (negative) and the rate of disappearance (positive).

  • Practice writing the full rate equality for balanced equations: Rate=−1aΔ[A]Δt=+1cΔ[C]Δt\text{Rate} = -\frac{1}{a}\frac{\Delta[A]}{\Delta t} = +\frac{1}{c}\frac{\Delta[C]}{\Delta t}.

OverviewACEpath Teacher's Diagnosis

03 The student multiplies by the stoichiometric coefficient 2 instead of dividing by 2 when relating the rate of change of Fe³⁺ to the reaction rate.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δ[FeX3+]Δt=−0.0750 M25.0 s=−0.00300 M/s\frac{\Delta[\ce{Fe^{3+}}]}{\Delta t} = \frac{-0.0750\text{ M}}{25.0\text{ s}} = -0.00300\text{ M/s}

  2. Step 2

    Rate of consumption=−(−0.00300 M/s)=0.00300 M/s\text{Rate of consumption} = -(-0.00300\text{ M/s}) = 0.00300\text{ M/s}

  3. Step 3

    Reaction rate=−2×(Δ[FeX3+]Δt)=−2×(−0.00300 M/s)=0.00600 M/s\text{Reaction rate} = -2 \times \left(\frac{\Delta[\ce{Fe^{3+}}]}{\Delta t}\right) = -2 \times (-0.00300\text{ M/s}) = 0.00600\text{ M/s}

    Correct

    Rate=−12Δ[FeX3+]Δt=−12(−0.00300 M/s)=1.50×10−3 M⋅s−1\text{Rate} = -\frac{1}{2}\frac{\Delta[\ce{Fe^{3+}}]}{\Delta t} = -\frac{1}{2}(-0.00300\text{ M/s}) = 1.50 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}

    To obtain the unique overall reaction rate, you must divide the rate of consumption of a species by its stoichiometric coefficient, rather than multiplying by it.

  4. Step 4

    Δ[SnX4+]Δt=0.00600 M/s\frac{\Delta[\ce{Sn^{4+}}]}{\Delta t} = 0.00600\text{ M/s}

    Correct

    Δ[SnX4+]Δt=Rate=1.50×10−3 M⋅s−1\frac{\Delta[\ce{Sn^{4+}}]}{\Delta t} = \text{Rate} = 1.50 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}

    You correctly recognized that the formation rate of SnX4+\ce{Sn^{4+}} equals the overall reaction rate, but your numerical answer inherited the calculation error from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the raw concentration derivative with its appropriate negative sign.

You correctly defined the consumption rate as a positive quantity.

You understood that the rate of formation of SnX4+\ce{Sn^{4+}} matches the overall reaction rate because its stoichiometric coefficient is 11.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometric coefficient inverted (multiplied instead of divided)

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You multiplied the species rate by its stoichiometric coefficient aa instead of dividing by aa (using Rate=−aΔ[A]Δt\text{Rate} = -a \frac{\Delta[A]}{\Delta t} instead of Rate=−1aΔ[A]Δt\text{Rate} = -\frac{1}{a}\frac{\Delta[A]}{\Delta t}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Stoichiometric Scaling of Reaction Rates
  • For any reaction aA+bB→cC+dDa\ce{A} + b\ce{B} \rightarrow c\ce{C} + d\ce{D}, the unique reaction rate scales as Rate=−1aΔ[A]Δt=+1cΔ[C]Δt\text{Rate} = -\frac{1}{a}\frac{\Delta[\ce{A}]}{\Delta t} = +\frac{1}{c}\frac{\Delta[\ce{C}]}{\Delta t}.

  • Divide each individual species rate by its balanced stoichiometric coefficient to find the single, unified reaction rate.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Rate=−12Δ[FeX3+]Δt=−12(−3.00×10−3 M⋅s−1)=1.50×10−3 M⋅s−1\text{Rate} = -\frac{1}{2}\frac{\Delta[\ce{Fe^{3+}}]}{\Delta t} = -\frac{1}{2}(-3.00 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}) = 1.50 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}

  2. Δ[SnX4+]Δt=+11(Rate)=1.50×10−3 M⋅s−1\frac{\Delta[\ce{Sn^{4+}}]}{\Delta t} = +\frac{1}{1}(\text{Rate}) = 1.50 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}

Final answer

(a) Δ[FeX3+]Δt=−3.00×10−3 M⋅s−1\frac{\Delta[\ce{Fe^{3+}}]}{\Delta t} = -3.00 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}; (b) −Δ[FeX3+]Δt=3.00×10−3 M⋅s−1-\frac{\Delta[\ce{Fe^{3+}}]}{\Delta t} = 3.00 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}; (c) Rate=1.50×10−3 M⋅s−1\text{Rate} = 1.50 \times 10^{-3}\text{ M}\cdot\text{s}^{-1} and Δ[SnX4+]Δt=1.50×10−3 M⋅s−1\frac{\Delta[\ce{Sn^{4+}}]}{\Delta t} = 1.50 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the general expression Rate=−1aΔ[A]Δt\text{Rate} = -\frac{1}{a}\frac{\Delta[\ce{A}]}{\Delta t} before substituting values.

  • Verify that species with larger stoichiometric coefficients have larger individual consumption/formation rates than the overall reaction rate, meaning the overall reaction rate must be smaller.

Lock it in

Similar question

01

For the reaction 2NOX2(g)→2NO(g)+OX2(g)2\ce{NO2}(g) \rightarrow 2\ce{NO}(g) + \ce{O2}(g), the concentration of NOX2\ce{NO2} drops from 0.100 M0.100\text{ M} to 0.060 M0.060\text{ M} in 10.0 s10.0\text{ s}. Determine: (a) the rate of disappearance of NOX2\ce{NO2}, and (b) the overall unique reaction rate.

Answer

(a) 4.0×10−3 M⋅s−14.0 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}; (b) 2.0×10−3 M⋅s−12.0 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}. Key steps: Δ[NOX2]=0.060−0.100=−0.040 M\Delta[\ce{NO2}] = 0.060 - 0.100 = -0.040\text{ M}. Rate of disappearance =−−0.040 M10.0 s=4.0×10−3 M⋅s−1= -\frac{-0.040\text{ M}}{10.0\text{ s}} = 4.0 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}. Overall Rate=12(4.0×10−3)=2.0×10−3 M⋅s−1\text{Rate} = \frac{1}{2}(4.0 \times 10^{-3}) = 2.0 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}.

02

In the Haber process, NX2(g)+3HX2(g)→2NHX3(g)\ce{N2}(g) + 3\ce{H2}(g) \rightarrow 2\ce{NH3}(g), ammonia is produced at a rate of 0.060 M⋅s−10.060\text{ M}\cdot\text{s}^{-1}. Calculate: (a) the overall reaction rate, and (b) the rate of consumption of HX2\ce{H2}.

Answer

(a) 0.030 M⋅s−10.030\text{ M}\cdot\text{s}^{-1}; (b) 0.090 M⋅s−10.090\text{ M}\cdot\text{s}^{-1}. Key steps: Overall Rate=+12Δ[NHX3]Δt=0.0602=0.030 M⋅s−1\text{Rate} = +\frac{1}{2}\frac{\Delta[\ce{NH3}]}{\Delta t} = \frac{0.060}{2} = 0.030\text{ M}\cdot\text{s}^{-1}. Consumption rate of HX2=−Δ[HX2]Δt=3×Rate=3(0.030)=0.090 M⋅s−1\ce{H2} = -\frac{\Delta[\ce{H2}]}{\Delta t} = 3 \times \text{Rate} = 3(0.030) = 0.090\text{ M}\cdot\text{s}^{-1}.

03

Consider the oxidation 4NHX3(g)+5OX2(g)→4NO(g)+6HX2O(g)4\ce{NH3}(g) + 5\ce{O2}(g) \rightarrow 4\ce{NO}(g) + 6\ce{H2O}(g). If water vapor forms at a rate of 0.036 M⋅s−10.036\text{ M}\cdot\text{s}^{-1}, find: (a) the unique reaction rate, and (b) the raw derivative Δ[OX2]Δt\frac{\Delta[\ce{O2}]}{\Delta t}.

Answer

(a) 0.0060 M⋅s−10.0060\text{ M}\cdot\text{s}^{-1}; (b) −0.030 M⋅s−1-0.030\text{ M}\cdot\text{s}^{-1}. Key steps: Rate=16Δ[HX2O]Δt=0.0366=0.0060 M⋅s−1\text{Rate} = \frac{1}{6}\frac{\Delta[\ce{H2O}]}{\Delta t} = \frac{0.036}{6} = 0.0060\text{ M}\cdot\text{s}^{-1}. For OX2\ce{O2}, Rate=−15Δ[OX2]Δt  ⟹  Δ[OX2]Δt=−5×Rate=−5(0.0060)=−0.030 M⋅s−1\text{Rate} = -\frac{1}{5}\frac{\Delta[\ce{O2}]}{\Delta t} \implies \frac{\Delta[\ce{O2}]}{\Delta t} = -5 \times \text{Rate} = -5(0.0060) = -0.030\text{ M}\cdot\text{s}^{-1}.

Loading workspace…