Resources

In an analytical conductometric titration experiment, a laboratory student titrates 50.00 mL50.00\text{ mL} of a 0.0500 M0.0500\text{ M} solution of the weak electrolyte acetic acid (CH3COOH\text{CH}_3\text{COOH}, Ka=1.80×10−5K_a = 1.80 \times 10^{-5}) with a standardized solution of the strong electrolyte sodium hydroxide (0.1000 M NaOH0.1000\text{ M}\text{ NaOH}). A conductivity probe measures electrical conductance as titrant is added from a calibrated burette. (a) Calculate the volume of NaOH\text{NaOH} titrant (VeV_e, in mL\text{mL}) required to reach the equivalence point. (b) Calculate the total concentration of all mobile ions at the equivalence point, and determine the solution pH\text{pH} at this point. (c) Explain why the electrical conductivity rises moderately from 0 mL0\text{ mL} up to the equivalence point, and then increases with a significantly steeper slope past the equivalence point.

Answer and steps

Final answer

(a) Ve=25.00 mLV_e = 25.00\text{ mL}. (b) Total volume = 75.00 mL75.00\text{ mL}; the strong electrolyte salt produced is sodium acetate with [Na+]=0.0333 M[\text{Na}^+] = 0.0333\text{ M}, [CH3COO−]≈0.0333 M[\text{CH}_3\text{COO}^-] \approx 0.0333\text{ M}, [OH−]=4.30×10−6 M[\text{OH}^-] = 4.30 \times 10^{-6}\text{ M}, [H3O+]=2.32×10−9 M[\text{H}_3\text{O}^+] = 2.32 \times 10^{-9}\text{ M}; total mobile ion concentration ≈0.0667 M\approx 0.0667\text{ M}; pH=8.63\text{pH} = 8.63. (c) Before the equivalence point, poorly conducting un-ionized weak acid molecules are converted into strong electrolyte ions (Na+\text{Na}^+ and CH3COO−\text{CH}_3\text{COO}^-), causing a steady moderate conductance increase; beyond the equivalence point, addition of excess strong electrolyte introduces unreacted, highly mobile hydroxide ions (OH−\text{OH}^-), which possess an exceptionally high molar ionic conductivity, creating a much steeper upward slope.

Steps

Part (a): Volume of NaOH\ce{NaOH} Titrant at the Equivalence Point

The neutralization reaction between acetic acid and sodium hydroxide is: CHX3COOH(aq)+NaOH(aq)→CHX3COONa(aq)+HX2O(l)\ce{CH3COOH(aq) + NaOH(aq) -> CH3COONa(aq) + H2O(l)}

At the equivalence point, the moles of NaOH\ce{NaOH} added equal the initial moles of CHX3COOH\ce{CH3COOH}: nacid=Cacid⋅Vacid=(0.0500 M)(50.00 mL)=2.500 mmoln_{\ce{acid}} = C_{\ce{acid}} \cdot V_{\ce{acid}} = (0.0500\text{ M})(50.00\text{ mL}) = 2.500\text{ mmol}

Using the molarity of the NaOH\ce{NaOH} solution: Ve=nacidCNaOH=2.500 mmol0.1000 M=25.00 mLV_e = \frac{n_{\ce{acid}}}{C_{\ce{NaOH}}} = \frac{2.500\text{ mmol}}{0.1000\text{ M}} = 25.00\text{ mL}


Part (b): Total Mobile Ion Concentration and pH\text{pH} at the Equivalence Point

  1. Total Volume of the Solution: Vtotal=Vacid+Ve=50.00 mL+25.00 mL=75.00 mLV_{\text{total}} = V_{\ce{acid}} + V_e = 50.00\text{ mL} + 25.00\text{ mL} = 75.00\text{ mL}
  2. Concentration of the Salt Produced: The neutralization yields 2.500 mmol2.500\text{ mmol} of the soluble strong electrolyte sodium acetate (CHX3COONa\ce{CH3COONa}): [NaX+]=2.500 mmol75.00 mL=130 M≈0.0333 M[\ce{Na+}] = \frac{2.500\text{ mmol}}{75.00\text{ mL}} = \frac{1}{30}\text{ M} \approx 0.0333\text{ M} The initial nominal concentration of the acetate ion is also Csalt=0.0333 MC_{\ce{salt}} = 0.0333\text{ M}.
  3. Hydrolysis Equilibrium and pH\text{pH} Calculation: Acetate acts as a weak base in water: CHX3COOX−(aq)+HX2O(l)⇌CHX3COOH(aq)+OHX−(aq)\ce{CH3COO-(aq) + H2O(l) <=> CH3COOH(aq) + OH-(aq)} The base dissociation constant KbK_b at 25∘C25^\circ\text{C} is: Kb=KwKa=1.00×10−141.80×10−5≈5.56×10−10K_b = \frac{K_w}{K_a} = \frac{1.00 \times 10^{-14}}{1.80 \times 10^{-5}} \approx 5.56 \times 10^{-10}

    Setting [OHX−]=[CHX3COOH]=x[\ce{OH-}] = [\ce{CH3COOH}] = x: Kb=x2Csalt−x≈x20.0333K_b = \frac{x^2}{C_{\ce{salt}} - x} \approx \frac{x^2}{0.0333} x=Kb⋅Csalt=(5.56×10−10)(0.0333)≈4.30×10−6 Mx = \sqrt{K_b \cdot C_{\ce{salt}}} = \sqrt{(5.56 \times 10^{-10})(0.0333)} \approx 4.30 \times 10^{-6}\text{ M}

    Therefore:

    • [OHX−]=4.30×10−6 M[\ce{OH-}] = 4.30 \times 10^{-6}\text{ M}
    • [HX3OX+]=Kw[OHX−]=1.00×10−144.30×10−6=2.32×10−9 M[\ce{H3O+}] = \frac{K_w}{[\ce{OH-}]} = \frac{1.00 \times 10^{-14}}{4.30 \times 10^{-6}} = 2.32 \times 10^{-9}\text{ M}
    • pH=−log⁡[HX3OX+]=−log⁡(2.32×10−9)=8.63\text{pH} = -\log[\ce{H3O+}] = -\log(2.32 \times 10^{-9}) = 8.63
  4. Concentrations of All Mobile Ions:

    • [NaX+]=0.0333 M[\ce{Na+}] = 0.0333\text{ M}
    • [CHX3COOX−]=0.0333 M−x≈0.0333 M[\ce{CH3COO-}] = 0.0333\text{ M} - x \approx 0.0333\text{ M}
    • [OHX−]=4.30×10−6 M[\ce{OH-}] = 4.30 \times 10^{-6}\text{ M}
    • [HX3OX+]=2.32×10−9 M[\ce{H3O+}] = 2.32 \times 10^{-9}\text{ M}

    Summing all ionic species: Total mobile ion concentration=[NaX+]+[CHX3COOX−]+[OHX−]+[HX3OX+]≈0.0333 M+0.0333 M=0.0667 M\text{Total mobile ion concentration} = [\ce{Na+}] + [\ce{CH3COO-}] + [\ce{OH-}] + [\ce{H3O+}] \approx 0.0333\text{ M} + 0.0333\text{ M} = 0.0667\text{ M}


Part (c): Conductometric Titration Curve Shape

  • Initial Stage (0 mL0\text{ mL} to Equivalence Point, 25.00 mL25.00\text{ mL}): Initially, acetic acid is a weak electrolyte that is only slightly ionized, resulting in low initial conductivity. As NaOH\ce{NaOH} is added, un-ionized CHX3COOH\ce{CH3COOH} molecules are converted into fully dissociated ions (NaX+\ce{Na+} and CHX3COOX−\ce{CH3COO-}). Although the total solution volume increases, the net number of mobile charge carriers rises, resulting in a moderate, steady increase in conductivity.
  • Post-Equivalence Stage (>25.00 mL> 25.00\text{ mL}): Past the equivalence point, all acetic acid has reacted. Further addition of titrant introduces unreacted NaX+\ce{Na+} and free OHX−\ce{OH-} ions. Hydroxide ions (OHX−\ce{OH-}) conduct electricity via the Grotthuss proton-jumping mechanism, giving them an exceptionally high limiting molar ionic conductivity (≈198 S⋅cm2/mol\approx 198\text{ S}\cdot\text{cm}^2/\text{mol}) compared to acetate (≈41 S⋅cm2/mol\approx 41\text{ S}\cdot\text{cm}^2/\text{mol}) and sodium (≈50 S⋅cm2/mol\approx 50\text{ S}\cdot\text{cm}^2/\text{mol}). This introduction of highly mobile OHX−\ce{OH-} ions causes the conductance to increase with a significantly steeper slope.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores volume dilution when calculating concentrations at the equivalence point, using the initial 50.00 mL volume instead of the total 75.00 mL volume.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n(acid)=0.0500 M×50.00 mL=2.500 mmol  ⟹  Ve=2.500 mmol0.1000 M=25.00 mLn(\text{acid}) = 0.0500\text{ M} \times 50.00\text{ mL} = 2.500\text{ mmol} \implies V_e = \frac{2.500\text{ mmol}}{0.1000\text{ M}} = 25.00\text{ mL}

  2. Step 2

    [Na+]=[CH3COO−]=2.500 mmol50.00 mL=0.0500 M  ⟹  Total mobile ion concentration=0.0500 M+0.0500 M=0.1000 M[\text{Na}^+] = [\text{CH}_3\text{COO}^-] = \frac{2.500\text{ mmol}}{50.00\text{ mL}} = 0.0500\text{ M} \implies \text{Total mobile ion concentration} = 0.0500\text{ M} + 0.0500\text{ M} = 0.1000\text{ M}

    Correct

    Vtotal=50.00 mL+25.00 mL=75.00 mL  ⟹  [Na+]=[CH3COO−]=2.500 mmol75.00 mL≈0.0333 M  ⟹  Total≈0.0667 MV_{\text{total}} = 50.00\text{ mL} + 25.00\text{ mL} = 75.00\text{ mL} \implies [\text{Na}^+] = [\text{CH}_3\text{COO}^-] = \frac{2.500\text{ mmol}}{75.00\text{ mL}} \approx 0.0333\text{ M} \implies \text{Total} \approx 0.0667\text{ M}

    You divided the moles of salt produced by the initial acid volume of 50.00 mL50.00\text{ mL} instead of the total solution volume at equivalence (Vtotal=50.00 mL+25.00 mL=75.00 mLV_{\text{total}} = 50.00\text{ mL} + 25.00\text{ mL} = 75.00\text{ mL}). This neglected the dilution from adding the titrant.

  3. Step 3

    Kb=1.00×10−141.80×10−5=5.56×10−10  ⟹  [OH−]=5.56×10−10×0.0500=5.27×10−6 M  ⟹  pOH=5.28  ⟹  pH=8.72K_b = \frac{1.00 \times 10^{-14}}{1.80 \times 10^{-5}} = 5.56 \times 10^{-10} \implies [\text{OH}^-] = \sqrt{5.56 \times 10^{-10} \times 0.0500} = 5.27 \times 10^{-6}\text{ M} \implies \text{pOH} = 5.28 \implies \text{pH} = 8.72

    Correct

    [OH−]=Kb⋅Csalt=(5.56×10−10)(0.0333 M)=4.30×10−6 M  ⟹  pH=14.00−(−log⁡10(4.30×10−6))=8.63[\text{OH}^-] = \sqrt{K_b \cdot C_{\text{salt}}} = \sqrt{(5.56 \times 10^{-10})(0.0333\text{ M})} = 4.30 \times 10^{-6}\text{ M} \implies \text{pH} = 14.00 - (-\log_{10}(4.30 \times 10^{-6})) = 8.63

    Your hydrolysis method and formula choices were completely correct, but your resulting pH\text{pH} value was slightly shifted because it relied on the undiluted salt concentration from the previous step.

  4. Step 4

    Conductivity rises moderately before equivalence because weak acid is converted into fully dissociated ions Na+\text{Na}^+ and CH3COO−\text{CH}_3\text{COO}^-. Past equivalence, excess NaOH\text{NaOH} adds highly conducting OH−\text{OH}^- ions, causing conductance to rise much faster.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the stoichiometric equivalence point volume Ve=25.00 mLV_e = 25.00\text{ mL} accurately.

You correctly set up the base hydrolysis equilibrium constant Kb=KwKaK_b = \frac{K_w}{K_a} for the acetate ion.

You correctly connected ionic species and mobilities to the conductance slope changes in part (c).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of titrant volume dilution at equivalence point

You used the initial analyte volume 50.00 mL50.00\text{ mL} as the denominator instead of adding the 25.00 mL25.00\text{ mL} of titrant added to reach equivalence.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating titration stoichiometric calculations as occurring in a static container volume rather than actively tracking Vtotal=Vanalyte+VtitrantV_{\text{total}} = V_{\text{analyte}} + V_{\text{titrant}} whenever determining post-mixing molarities.

REASONING PATH
Your ACEpath teacher’s suggested approach
Total Volume Rule in Titrations
  • At any titration point after mixing, molar concentration is C=nVtotalC = \frac{n}{V_{\text{total}}}, where Vtotal=Vanalyte+VtitrantV_{\text{total}} = V_{\text{analyte}} + V_{\text{titrant}}.

  • Always write down Vtotal=Vacid+VbaseV_{\text{total}} = V_{\text{acid}} + V_{\text{base}} explicitly before converting remaining or produced millimoles back into molarity.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find total volume at equivalence: Vtotal=50.00 mL+25.00 mL=75.00 mLV_{\text{total}} = 50.00\text{ mL} + 25.00\text{ mL} = 75.00\text{ mL}.

  2. Calculate true ion concentrations: [Na+]=[CH3COO−]=2.500 mmol75.00 mL=0.0333 M[\text{Na}^+] = [\text{CH}_3\text{COO}^-] = \frac{2.500\text{ mmol}}{75.00\text{ mL}} = 0.0333\text{ M}.

  3. Sum major mobile ions: Total mobile ion concentration=0.0333 M+0.0333 M=0.0667 M\text{Total mobile ion concentration} = 0.0333\text{ M} + 0.0333\text{ M} = 0.0667\text{ M}.

  4. Recalculate hydrolysis: [OH−]=(5.56×10−10)(0.0333 M)=4.30×10−6 M[\text{OH}^-] = \sqrt{(5.56 \times 10^{-10})(0.0333\text{ M})} = 4.30 \times 10^{-6}\text{ M}.

  5. Calculate pH\text{pH}: pOH=−log⁡10(4.30×10−6)=5.37  ⟹  pH=14.00−5.37=8.63\text{pOH} = -\log_{10}(4.30 \times 10^{-6}) = 5.37 \implies \text{pH} = 14.00 - 5.37 = 8.63.

Final answer

Total mobile ion concentration ≈0.0667 M\approx 0.0667\text{ M}; pH=8.63\text{pH} = 8.63

NEXT STEPS
Final Takeaways from Your Teacher
  • In titration problems, underline both the analyte volume and the added titrant volume to prompt yourself to add them together.

  • Practice identifying spectator ions versus reacting species at equivalence to ensure complete ion accounting.

OverviewACEpath Teacher's Diagnosis

02 The student uses Ka instead of Kb when setting up the hydrolysis equilibrium of the conjugate base acetate, mistakenly treating the solution at equivalence as acidic.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n(CH3COOH)=0.0500 M×50.00 mL=2.500 mmol  ⟹  Ve=2.500 mmol0.1000 M=25.00 mLn(\text{CH}_3\text{COOH}) = 0.0500\text{ M} \times 50.00\text{ mL} = 2.500\text{ mmol} \implies V_e = \frac{2.500\text{ mmol}}{0.1000\text{ M}} = 25.00\text{ mL}

  2. Step 2

    Vtotal=50.00 mL+25.00 mL=75.00 mL  ⟹  [CH3COO−]=[Na+]=2.500 mmol75.00 mL=0.0333 M  ⟹  Total ion concentration=0.0333 M+0.0333 M=0.0667 MV_{\text{total}} = 50.00\text{ mL} + 25.00\text{ mL} = 75.00\text{ mL} \implies [\text{CH}_3\text{COO}^-] = [\text{Na}^+] = \frac{2.500\text{ mmol}}{75.00\text{ mL}} = 0.0333\text{ M} \implies \text{Total ion concentration} = 0.0333\text{ M} + 0.0333\text{ M} = 0.0667\text{ M}

  3. Step 3

    [H+]=Ka⋅[CH3COO−]=1.80×10−5×0.0333=7.74×10−4 M  ⟹  pH=−log⁡10(7.74×10−4)=3.11[\text{H}^+] = \sqrt{K_a \cdot [\text{CH}_3\text{COO}^-]} = \sqrt{1.80 \times 10^{-5} \times 0.0333} = 7.74 \times 10^{-4}\text{ M} \implies \text{pH} = -\log_{10}(7.74 \times 10^{-4}) = 3.11

    Correct

    Kb=KwKa=5.56×10−10  ⟹  [OH−]=Kb⋅Csalt=(5.56×10−10)(0.0333)≈4.30×10−6 M  ⟹  pH=14.00−(−log⁡[OH−])=8.63K_b = \frac{K_w}{K_a} = 5.56 \times 10^{-10} \implies [\text{OH}^-] = \sqrt{K_b \cdot C_{\text{salt}}} = \sqrt{(5.56 \times 10^{-10})(0.0333)} \approx 4.30 \times 10^{-6}\text{ M} \implies \text{pH} = 14.00 - (-\log[\text{OH}^-]) = 8.63

    At the equivalence point, all acetic acid has been converted into its conjugate base, acetate (CH3COO−\text{CH}_3\text{COO}^-). Because acetate is a weak base, it hydrolyzes water to generate hydroxide ions ([OH−]=Kb⋅C[\text{OH}^-] = \sqrt{K_b \cdot C}), resulting in a basic solution (extpH=8.63 ext{pH} = 8.63). You instead applied KaK_a as if acetate were an acid generating hydronium directly.

  4. Step 4

    Prior to equivalence, conductivity increases moderately because neutral CH3COOH\text{CH}_3\text{COOH} is converted to ionic CH3COONa\text{CH}_3\text{COONa}. After equivalence, adding excess NaOH\text{NaOH} introduces unreacted OH−\text{OH}^- ions with high ionic mobility, giving a steeper slope.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the equivalence volume using stoichiometry.

You found the correct dilution volume and mobile ion concentrations for the dissociated salt.

You accurately identified the role of ion generation and hydroxide ionic mobility in the shape of the conductivity curve.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equivalence Point Hydrolysis vs Acid Dissociation

You used KaK_a to calculate [H+][\text{H}^+] at equivalence instead of finding [OH−][\text{OH}^-] from the base hydrolysis constant KbK_b of the conjugate base.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the equilibrium behavior of an intact weak acid with that of its conjugate base salt solution at the titration equivalence point.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Major Species at Equivalence
  • Titrating a weak acid with a strong base yields only the conjugate weak base (and spectator counterions) at equivalence.

  • Always identify the dominant form in solution before choosing an equilibrium expression; if the remaining species is an anion of a weak acid, it functions as a weak base.

Convert $K_a$ to $K_b$
  • For any conjugate pair in water at 25∘C25^\circ\text{C}, Ka⋅Kb=Kw=1.00×10−14K_a \cdot K_b = K_w = 1.00 \times 10^{-14}.

  • Calculate Kb=KwKaK_b = \frac{K_w}{K_a} and solve for [OH−]=Kb⋅Cbase[\text{OH}^-] = \sqrt{K_b \cdot C_{\text{base}}}, then determine pH=14.00−pOH\text{pH} = 14.00 - \text{pOH}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the base hydrolysis equilibrium: CH3COO−+H2O⇌CH3COOH+OH−\text{CH}_3\text{COO}^- + \text{H}_2\text{O} \rightleftharpoons \text{CH}_3\text{COOH} + \text{OH}^-.

  2. Calculate Kb=KwKa=1.00×10−141.80×10−5=5.56×10−10K_b = \frac{K_w}{K_a} = \frac{1.00 \times 10^{-14}}{1.80 \times 10^{-5}} = 5.56 \times 10^{-10}.

  3. Solve for [OH−]=Kb⋅C=(5.56×10−10)(0.0333)≈4.30×10−6 M[\text{OH}^-] = \sqrt{K_b \cdot C} = \sqrt{(5.56 \times 10^{-10})(0.0333)} \approx 4.30 \times 10^{-6}\text{ M}.

  4. Find pOH=−log⁡10(4.30×10−6)=5.37\text{pOH} = -\log_{10}(4.30 \times 10^{-6}) = 5.37, and then pH=14.00−5.37=8.63\text{pH} = 14.00 - 5.37 = 8.63.

Final answer

pH=8.63\text{pH} = 8.63

NEXT STEPS
Final Takeaways from Your Teacher
  • Review salt hydrolysis to immediately recognize whether a neutral, acidic, or basic solution forms at equivalence.

  • Practice checking your equivalence pH against a qualitative rule of thumb: weak acid + strong base always yields pH>7\text{pH} > 7.

OverviewACEpath Teacher's Diagnosis

03 The student misinterprets the steeper post-equivalence conductance increase as being caused by accumulating Na+ ions rather than the exceptionally high molar ionic conductivity of OH- ions.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n=0.0500 M⋅50.00 mL=2.500 mmol  ⟹  Ve=2.500 mmol0.1000 M=25.00 mLn = 0.0500\text{ M} \cdot 50.00\text{ mL} = 2.500\text{ mmol} \implies V_e = \frac{2.500\text{ mmol}}{0.1000\text{ M}} = 25.00\text{ mL}

  2. Step 2

    Vtotal=50.00 mL+25.00 mL=75.00 mL  ⟹  [Na+]=2.500 mmol75.00 mL=0.0333 M  ⟹  [CH3COO−]=0.0333 M  ⟹  Total mobile ion concentration=0.0333 M+0.0333 M=0.0667 MV_{\text{total}} = 50.00\text{ mL} + 25.00\text{ mL} = 75.00\text{ mL} \implies [\text{Na}^+] = \frac{2.500\text{ mmol}}{75.00\text{ mL}} = 0.0333\text{ M} \implies [\text{CH}_3\text{COO}^-] = 0.0333\text{ M} \implies \text{Total mobile ion concentration} = 0.0333\text{ M} + 0.0333\text{ M} = 0.0667\text{ M}

  3. Step 3

    Kb=1.00×10−141.80×10−5=5.56×10−10  ⟹  [OH−]=5.56×10−10⋅0.0333=4.30×10−6 M  ⟹  pOH=5.37  ⟹  pH=14.00−5.37=8.63K_b = \frac{1.00 \times 10^{-14}}{1.80 \times 10^{-5}} = 5.56 \times 10^{-10} \implies [\text{OH}^-] = \sqrt{5.56 \times 10^{-10} \cdot 0.0333} = 4.30 \times 10^{-6}\text{ M} \implies \text{pOH} = 5.37 \implies \text{pH} = 14.00 - 5.37 = 8.63

  4. Step 4

    Before equivalence, conductivity rises moderately because poorly dissociated CH3COOH\text{CH}_3\text{COOH} reacts to produce mobile Na+\text{Na}^+ and CH3COO−\text{CH}_3\text{COO}^- ions.

  5. Step 5

    Past the equivalence point, the slope becomes much steeper because Na+\text{Na}^+ ions are now added twice as fast without any being consumed.

    Correct

    Past the equivalence point, excess strong base introduces unreacted OHX−\ce{OH-} ions, which have an exceptionally high limiting molar ionic conductivity (λm∘≈198 S⋅cm2/mol\lambda_m^\circ \approx 198\text{ S}\cdot\text{cm}^2/\text{mol} via the Grotthuss proton-hopping mechanism) compared to NaX+\ce{Na+} and CHX3COOX−\ce{CH3COO-}.

    NaX+\ce{Na+} is a spectator ion that was never consumed before equivalence, so its rate of addition does not change. The steeper slope is caused by accumulating unneutralized OHX−\ce{OH-} ions, which conduct electricity far more effectively than other ions.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the titration equivalence volume correctly.

You correctly calculated the salt concentration and total mobile ion concentration at equivalence.

You carried out the acetate hydrolysis equilibrium calculation and determined the correct equivalence pH.

You recognized that converting un-ionized weak acid into mobile salt ions causes conductivity to rise before the equivalence point.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Molar Ionic Conductivity Misconception

You assumed that sodium ions were being consumed prior to equivalence and that their accumulation dictated the post-equivalence slope.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You focused solely on spectator ion counting rather than comparing the specific molar ionic conductivities of the chemical species in solution, overlooking the uniquely high ionic mobility of free hydroxide ions (OHX−\ce{OH-}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Molar ionic conductivity ranking
  • Conductance depends not just on ion concentration, but on each ion's limiting molar ionic conductivity (κ=∑ciλi\kappa = \sum c_i \lambda_i). In water, HX3OX+\ce{H3O+} (≈350 S⋅cm2/mol\approx 350\text{ S}\cdot\text{cm}^2/\text{mol}) and OHX−\ce{OH-} (≈198 S⋅cm2/mol\approx 198\text{ S}\cdot\text{cm}^2/\text{mol}) conduct electricity far better than typical monoatomic or polyatomic ions (≈40–75 S⋅cm2/mol\approx 40\text{--}75\text{ S}\cdot\text{cm}^2/\text{mol}) due to the Grotthuss mechanism.

  • Whenever unreacted strong acid or strong base accumulates past an equivalence point, attribute the steep slope to free HX+\ce{H+} or OHX−\ce{OH-}.

Spectator ion behavior
  • In an acid-base neutralization, counterions such as NaX+\ce{Na+} or ClX−\ce{Cl-} do not react; their rate of addition per milliliter of titrant is constant across the entire titration.

  • Do not treat spectator counterions as 'consumed' during neutralization.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Any further titrant added after Ve=25.00 mLV_e = 25.00\text{ mL} directly adds unreacted NaX+\ce{Na+} and free OHX−\ce{OH-} ions.

  2. Hydroxide ions (OHX−\ce{OH-}) conduct charge via proton jumping (the Grotthuss mechanism), giving them an exceptionally high limiting molar ionic conductivity (λOHX−∘≈198 S⋅cm2/mol\lambda_{\ce{OH-}}^\circ \approx 198\text{ S}\cdot\text{cm}^2/\text{mol} vs. λCHX3COOX−∘≈41 S⋅cm2/mol\lambda_{\ce{CH3COO-}}^\circ \approx 41\text{ S}\cdot\text{cm}^2/\text{mol} and λNaX+∘≈50 S⋅cm2/mol\lambda_{\ce{Na+}}^\circ \approx 50\text{ S}\cdot\text{cm}^2/\text{mol}).

  3. The rapid accumulation of these highly mobile OHX−\ce{OH-} ions causes the conductance to increase with a much steeper slope than in the pre-equivalence region.

Final answer

Past the equivalence point, adding excess strong base introduces unreacted, highly mobile hydroxide ions (OHX−\ce{OH-}), which possess an exceptionally high molar ionic conductivity compared to acetate and sodium, producing a significantly steeper slope.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the Grotthuss mechanism and compare the limiting molar conductivities of HX3OX+\ce{H3O+}, OHX−\ce{OH-}, NaX+\ce{Na+}, and CHX3COOX−\ce{CH3COO-}.

  • Practice identifying which specific mobile ions are added, consumed, or left unreacted in each region of a conductometric titration curve.

Lock it in

Similar question

01

A student titrates 30.00 mL30.00\text{ mL} of 0.0800 M0.0800\text{ M} propanoic acid with 0.1200 M KOH0.1200\text{ M}\text{ KOH}. (a) Calculate the volume of KOH\text{KOH} needed to reach equivalence. (b) Calculate the concentration of potassium ions [K+][\text{K}^+] at the equivalence point.

Answer

(a) Ve=(0.0800 M)(30.00 mL)0.1200 M=20.00 mLV_e = \frac{(0.0800\text{ M})(30.00\text{ mL})}{0.1200\text{ M}} = 20.00\text{ mL}. (b) Total volume is 30.00 mL+20.00 mL=50.00 mL30.00\text{ mL} + 20.00\text{ mL} = 50.00\text{ mL}. Moles of K+=2.400 mmol\text{K}^+ = 2.400\text{ mmol}. [K+]=2.400 mmol50.00 mL=0.0480 M[\text{K}^+] = \frac{2.400\text{ mmol}}{50.00\text{ mL}} = 0.0480\text{ M}.

02

A 25.00 mL25.00\text{ mL} sample of 0.1000 M0.1000\text{ M} formic acid (HCOOH\text{HCOOH}, Ka=1.80×10−4K_a = 1.80 \times 10^{-4}) is titrated with 0.1000 M NaOH0.1000\text{ M}\text{ NaOH} to the equivalence point. Determine the total concentration of all mobile ions (neglecting water autoionization ions) and calculate the solution pH\text{pH} at the equivalence point.

Answer

Ve=25.00 mLV_e = 25.00\text{ mL}; Vtotal=50.00 mLV_{\text{total}} = 50.00\text{ mL}. Moles of HCOONa=2.500 mmol\text{HCOONa} = 2.500\text{ mmol}. [Na+]=[HCOO−]=2.500 mmol50.00 mL=0.0500 M[\text{Na}^+] = [\text{HCOO}^-] = \frac{2.500\text{ mmol}}{50.00\text{ mL}} = 0.0500\text{ M}. Total mobile ion concentration =0.0500+0.0500=0.1000 M= 0.0500 + 0.0500 = 0.1000\text{ M}. Kb=1.00×10−141.80×10−4=5.56×10−11K_b = \frac{1.00 \times 10^{-14}}{1.80 \times 10^{-4}} = 5.56 \times 10^{-11}. [OH−]=(5.56×10−11)(0.0500)=1.67×10−6 M[\text{OH}^-] = \sqrt{(5.56 \times 10^{-11})(0.0500)} = 1.67 \times 10^{-6}\text{ M}. pH=14.00−(−log⁡10(1.67×10−6))=8.22\text{pH} = 14.00 - (-\log_{10}(1.67 \times 10^{-6})) = 8.22.

03

In a conductometric titration, 40.00 mL40.00\text{ mL} of 0.0500 M HCl0.0500\text{ M}\text{ HCl} (a strong acid) is titrated with 0.1000 M NaOH0.1000\text{ M}\text{ NaOH}. Contrast the slope of electrical conductivity before equivalence with that of the weak acid titration in the original problem, explaining the ion substitution responsible.

Answer

Before equivalence, conductivity drops sharply with a steep downward slope. Highly conductive hydronium ions (H3O+\text{H}_3\text{O}^+, limiting molar conductivity ≈350 S⋅cm2/mol\approx 350\text{ S}\cdot\text{cm}^2/\text{mol}) are consumed and replaced by much less conductive sodium ions (Na+\text{Na}^+, ≈50 S⋅cm2/mol\approx 50\text{ S}\cdot\text{cm}^2/\text{mol}). In contrast, the weak acid titration slope rises moderately because poorly conducting neutral molecules (CH3COOH\text{CH}_3\text{COOH}) are converted into additional conducting ions (Na+\text{Na}^+ and CH3COO−\text{CH}_3\text{COO}^-).

Loading workspace…