Resources
In crystal field and ionic solid theory, the transition between stable coordination geometries for rock-salt (, -coordinate octahedral) and cesium chloride (, -coordinate cubic) lattices is governed by critical radius ratio rules (). Determine the exact geometric threshold radius ratio below which an -coordinate cubic lattice undergoes cation-anion contact loss and becomes unstable relative to a -coordinate octahedral geometry. Express your final answer as an exact radical expression and rounded to three significant figures.
Answer and steps
Final answer
.
Steps
Understanding the Limiting Condition in an 8-Coordinate Cubic Lattice
In a body-centered cubic-like arrangement (such as the structure), a central cation of radius is coordinated by anions of radius positioned at the corners of a cube.
For the structure to remain mechanically and electrostatically stable, the central cation must remain in direct contact with all surrounding anions. The critical lower boundary (threshold) occurs when the corner anions simultaneously touch each other along the cube edges while just maintaining contact with the central cation along the body diagonal:
- If drops below this threshold, the cation is too small to fill the central cavity; the anions touch each other and prevent further inward contraction, breaking cation-anion contact and making the 8-coordinate arrangement unstable compared to a 6-coordinate (octahedral) geometry.
Relating Cube Dimensions to Ionic Radii
Let represent the edge length of the cubic unit cell.
- Along the cube edge (anion-anion contact):
At the critical limiting condition, adjacent anions just touch along each edge of length : - Along the body diagonal (cation-anion contact):
The body diagonal of a cube with edge length is given by: Along this diagonal, two anions at opposite corners touch the central cation between them:
Calculating the Critical Radius Ratio
Equating the two expressions for the body diagonal:
Substitute into the equation:
Divide both sides by :
Subtract from both sides:
Numerical Evaluation
Using the approximation :
Therefore, the exact threshold radius ratio is , which is approximately to three significant figures.
Typical errors
01 The student confuses the body-diagonal contact of a cube with face-diagonal contact, leading to the octahedral threshold √2 - 1 instead of the 8-coordinate cubic threshold.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
In an 8-coordinate cubic lattice, the central cation sits at the body center of the cube and touches the corner anions along the body diagonal of length , not along a face diagonal .
- Step 3Correct
You substituted your edge relation correctly, but the equation carried over the incorrect diagonal factor.
- Step 4Correct
Your algebraic rearrangement was executed properly, but it evaluated to the minimum radius ratio for -coordinate octahedral coordination rather than -coordinate cubic coordination.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly established the anion-anion contact along the unit cell edge ().
You correctly recognized that the diagonal distance spanning opposite corners across the central cation equals .
You completed the algebraic isolation of the radius ratio accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou applied the 2D face diagonal formula () instead of the 3D body diagonal formula () when determining the contact line passing through the central cation in an 8-coordinate cubic geometry.
REASONING PATH
Your ACEpath teacher’s suggested approach- Coordination Geometry & Contact Path
For an -coordinate cubic site, the central cation lies at the center of a cube, so cation-anion contact lies along the body diagonal: .
Identify the spatial line containing the center of both ions: 2D face diagonal gives (octahedral square plane), while 3D body diagonal gives (cubic).
CORRECTED PATH
ACEpath Teacher's DemonstrationThe body diagonal passing through the cube center is .
Substitute into the diagonal equation: .
Divide both sides by : .
Subtract to find the exact ratio: .
Evaluate numerically to three significant figures: .
02 The student incorrectly assumes the cube body diagonal equals 2a rather than √3 a, yielding a flawed ratio of 1.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
In a cubic unit cell of side length , the length of the body diagonal is , not .
- Step 3Correct
This step followed logically from your previous expression by substituting , but it inherits the geometric error from step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that the limiting condition involves anions touching along the cube edge ().
You correctly recognized that cation and anion touch along the body diagonal of the cube ().
You accurately carried out the algebraic substitution and isolation of the ratio based on your equations.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the formula for the body diagonal of a cube with rather than deriving it from the 3D Pythagorean theorem ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Cube Diagonal Dimensions
For a cube of edge length , the face diagonal is and the interior body diagonal is .
Always apply the three-dimensional Pythagorean theorem () when finding distances across opposite corners of a cubic unit cell.
CORRECTED PATH
ACEpath Teacher's DemonstrationEquate the body diagonal of the cube to the sum of the ionic diameters along that line: .
Substitute the edge contact condition into the diagonal equation: .
Divide both sides by : .
Subtract from both sides to isolate the radius ratio: .
03 The student inverts the radius ratio expression by dividing r₋ by r₊ during algebraic simplification, solving for r₋/r₊ = √3 - 1 and obtaining r₊/r₋ = 1/(√3 - 1) = (√3 + 1)/2 ≈ 1.37.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
When dividing both sides of by , the resulting ratio is , not . Dividing by would yield .
- Step 3Correct
This step followed logically from your inverted ratio in the previous step, but produced an incorrect final value.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that corner anions touch along the cube edge ().
You correctly formulated the body diagonal contact relationship ().
You correctly substituted into the diagonal equation to obtain .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou solved for instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisInverting the target fraction during algebraic rearrangement, combined with overlooking the physical sense check that a smaller central cation must give a critical radius ratio .
REASONING PATH
Your ACEpath teacher’s suggested approach- Isolating the Target Ratio
To find from , divide each term directly by : .
Divide directly by the denominator term () across the equation rather than cross-multiplying or moving terms manually.
- Physical Reality Check
In standard ionic radius ratio rules, cations are smaller than anions (), meaning for critical geometric thresholds.
Always verify that your calculated threshold ratio is less than whenever the cation occupies interstitial cavities between larger anions.
CORRECTED PATH
ACEpath Teacher's DemonstrationSubtract from both sides: .
Divide both sides by to isolate : .
Evaluate numerically: .
Lock it in
What is the contact diagonal in an 8-coordinate cubic lattice (such as ), and what is its length in terms of unit cell edge ?
The contact is along the body diagonal: .
Similar question
A simple cubic anion array has an edge length of at the critical contact limit where anions just touch along each edge. Calculate the radius of the central interstitial cation that fits perfectly without expanding the lattice. Express your answer in picometers rounded to one decimal place.
Answer
The edge condition is , so . The critical ratio for an 8-coordinate cubic cavity is . Therefore, .
In a hypothetical ionic compound , the radius of is and the radius of is . Based purely on the radius ratio rules, predict whether this compound prefers a -coordinate rock-salt geometry or an -coordinate cesium chloride geometry, and state the critical threshold that decides this.
Answer
Calculate the radius ratio: . Because exceeds the threshold , the cation is sufficiently large to maintain 8-coordinate cubic contact without anion-anion overlap. Thus, it prefers an -coordinate cesium chloride structure.
Derive the exact minimum radius ratio for an octahedral (-coordinate) site where anions of radius surround a central cation of radius . Show the geometric relationship in the square equatorial plane.
Answer
In the equatorial square cross-section, anions touch the central cation along the face diagonal: . The side length of the square is defined by touching adjacent anions: . By the Pythagorean theorem, . Equating these gives .