Resources
An unknown divalent metal is placed into a solution of tin(II) nitrate, . Spontaneous deposition of metallic tin is observed, producing a galvanic cell potential of . Given that the standard reduction potential of tin is , determine the identity of the standard reduction potential of the unknown metal couple and deduce whether metal can spontaneously reduce iron(II) ions given .
Answer and steps
Final answer
; No, metal cannot spontaneously reduce because .
Steps
Identify the half-reactions and calculate
When metal is placed in the solution, metallic tin deposits spontaneously. This means tin(II) ions are reduced to solid tin at the cathode, while the divalent metal is oxidized to ions at the anode:
The overall standard cell potential is given by:
Substitute the given values into the equation:
Determine if metal can spontaneously reduce
For metal to reduce , the hypothetical redox reaction is:
Here:
- Cathode (reduction): , with
- Anode (oxidation): , with
Calculate the standard cell potential for this process:
Conclude spontaneity
A redox reaction is spontaneous under standard conditions if and only if .
Because , the forward reaction is non-spontaneous. Therefore, metal cannot spontaneously reduce .
Common Pitfall: Be careful not to add the oxidation potential and the standard reduction potential while also using the minus sign in . When using standard reduction potentials for both half-cells, the cell potential is always standard reduction potential of the cathode minus standard reduction potential of the anode.
Typical errors
01 The student reverses the anode and cathode roles by writing E°cell = E°(anode) - E°(cathode), leading to an incorrect standard reduction potential of -0.02 V and an incorrect conclusion that M can reduce Fe²⁺.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Because metallic tin spontaneously deposits, is being reduced to at the cathode, while metal is oxidized at the anode. The standard cell potential is , so the tin couple must come first.
- Step 2Correct
Your formula and cathode/anode assignments for reducing were completely correct, but the numerical result was affected by substituting the earlier incorrect value of .
- Step 3Correct
Your thermodynamic reasoning that implies non-spontaneity is correct and leads to the correct qualitative conclusion, although the potential value should be .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that the reduction of acts as the cathode and oxidation of acts as the anode in the second reaction.
You correctly used the criterion that a reaction is spontaneous under standard conditions if and only if .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou swapped the cathode and anode terms in the standard cell potential equation for the first reaction.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the physical site of reduction (the deposited metal species, which forms the cathode) with the oxidized species when applying .
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify Cathode vs Anode from Observations
Reduction always occurs at the cathode (gain of electrons, deposition of metal: ), while oxidation occurs at the anode (loss of electrons, dissolution of metal: ).
Whenever solid metal precipitates out of solution, identify that metal ion couple as the cathode half-cell.
- Standard Cell Potential Formula
, using standard reduction potentials for both terms.
Always write the formula with explicit labels: before substituting numerical values.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify the reduction half-reaction: , so .
Identify the oxidation half-reaction: , so .
Apply : .
Calculate for the reaction with : .
Since , conclude that metal cannot spontaneously reduce .
; No, metal cannot spontaneously reduce because .
02 The student incorrectly adds the standard reduction potential of the cathode and E°cell to solve for E°(anode), obtaining -0.02 V instead of -0.26 V.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
When rearranging , adding to both sides and subtracting yields , rather than .
- Step 3Correct
Your formula and substitution method were correct, but the calculated potential was carried over from your earlier value of .
- Step 4Correct
Your thermodynamic reasoning is completely sound: a negative standard cell potential confirms that the reaction cannot occur spontaneously. However, the calculation relied on the propagated value from Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly set up the cell potential formula for both redox pairs.
You correctly deduced that a negative standard cell potential implies a non-spontaneous reaction.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou accidentally added instead of subtracting it when transposing terms across the equals sign.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisIn linear equations of the form , moving the subtracted variable to the left side requires subtracting from the right side, giving . Transposing without changing its sign led to .
REASONING PATH
Your ACEpath teacher’s suggested approach- Isolating a negative variable
For an equation , add to both sides to get , then subtract to get .
Write out the intermediate step before subtracting from both sides.
CORRECTED PATH
ACEpath Teacher's DemonstrationRearrange by isolating : .
Compute the standard cell potential for the reduction of by metal : .
Because , the reaction is non-spontaneous under standard conditions.
; No, metal cannot spontaneously reduce because .
03 The student misinterprets the reduction potential comparison, believing that a higher reduction potential allows a metal to act as a stronger reducing agent.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
, so metal cannot spontaneously reduce .
A more positive (higher) reduction potential means the ion is more readily reduced to , which means the neutral metal is a weaker reducing agent (less readily oxidized). For metal to spontaneously reduce , its standard reduction potential would need to be lower (more negative) than that of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that the spontaneous deposition of tin indicates tin acts as the cathode and metal acts as the anode.
You accurately calculated the reduction potential using .
You correctly compared the numeric values of the two reduction potentials ().
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou stated that because is more easily reduced than , metal could reduce . In reality, the species being oxidized is metal , not .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou conflated the tendency of a metal cation to gain electrons (reduction potential) with the ability of the neutral elemental metal to donate electrons (reducing power). A higher makes the cation a stronger oxidizing agent, but makes the neutral metal a weaker reducing agent.
REASONING PATH
Your ACEpath teacher’s suggested approach- Connecting $E^\circ$ to Spontaneity
For a proposed redox process , the standard cell potential is . The process is spontaneous if and only if .
Always write the hypothetical cell reaction, assign cathode (species gaining electrons) and anode (species losing electrons), and verify that before drawing a conclusion.
- Activity Series & Reduction Potentials
A neutral metal can spontaneously displace/reduce cation only if . More negative means stronger reducing agent metal.
Check that the reducing metal sits lower (more negative) on the standard reduction potential table than the cation it is trying to reduce.
CORRECTED PATH
ACEpath Teacher's DemonstrationFormulate the hypothetical redox equation: .
Identify the cathode half-reaction (reduction of ) and anode half-reaction (oxidation of ).
Calculate the cell potential: .
Since , the reaction is non-spontaneous under standard conditions.
; metal cannot spontaneously reduce because .
Lock it in
When using standard reduction potentials, what is the formula for the standard cell potential ?
. Memory cue: Reduction occurs at the cathode ('Red Cat'), and oxidation at the anode ('An Ox').
Similar question
A strip of metal is dipped into a solution (). Copper metal plates out spontaneously, generating . Calculate the standard reduction potential .
Answer
. Copper deposits, so is the cathode (). Using , we have , giving .
Given and , determine whether solid nickel can spontaneously reduce lead(II) ions under standard conditions, and calculate the standard cell potential.
Answer
Yes, solid can spontaneously reduce ; . Cathode: (). Anode: (). Then (spontaneous).
An unknown metal spontaneously reduces () with , but cannot reduce (). Determine and find the standard cell potential for the reaction between and .
Answer
; for , . For the first cell: . For the reaction with : .