Resources

A trace contaminant in wastewater has an instrumentally measured concentration of c=(84.50±0.25) mg/Lc = (84.50 \pm 0.25)\text{ mg/L}. Convert this concentration into molarity (mol/L\text{mol/L}) for a compound with molar mass M=246.30 g/molM = 246.30\text{ g/mol}, and propagate the absolute uncertainty in the resulting molar concentration assuming the molar mass is an exact tabulated constant.

Answer and steps

Final answer

C=(3.431±0.010)×10−4 mol/LC = (3.431 \pm 0.010) \times 10^{-4}\text{ mol/L}

Steps

01

Relate mass concentration to molar concentration

Molarity (CC, in mol/L\text{mol/L}) is related to mass concentration (cc, in g/L\text{g/L}) by dividing by the molar mass (MM, in g/mol\text{g/mol}):

C=cMC = \frac{c}{M}

First, convert the given mass concentration from mg/L\text{mg/L} to g/L\text{g/L}:

c=84.50 mg/L=84.50×10−3 g/L=0.08450 g/Lc = 84.50\text{ mg/L} = 84.50 \times 10^{-3}\text{ g/L} = 0.08450\text{ g/L}

Calculate the nominal molar concentration using M=246.30 g/molM = 246.30\text{ g/mol}:

C=0.08450 g/L246.30 g/mol≈3.430775×10−4 mol/LC = \frac{0.08450\text{ g/L}}{246.30\text{ g/mol}} \approx 3.430775 \times 10^{-4}\text{ mol/L}


02

Propagate the uncertainty

When a measured quantity cc is multiplied or divided by an exact constant kk (here, k=1Mk = \frac{1}{M}), the absolute uncertainty scales by that same constant:

δC=δcM\delta C = \frac{\delta c}{M}

Convert the absolute uncertainty δc\delta c to g/L\text{g/L}:

δc=0.25 mg/L=0.25×10−3 g/L\delta c = 0.25\text{ mg/L} = 0.25 \times 10^{-3}\text{ g/L}

Now, compute the absolute uncertainty in molarity:

δC=0.25×10−3 g/L246.30 g/mol≈1.015×10−6 mol/L=0.01015×10−4 mol/L\delta C = \frac{0.25 \times 10^{-3}\text{ g/L}}{246.30\text{ g/mol}} \approx 1.015 \times 10^{-6}\text{ mol/L} = 0.01015 \times 10^{-4}\text{ mol/L}


03

Apply rounding and significant figure rules

  • The initial absolute uncertainty (δc=0.25 mg/L\delta c = 0.25\text{ mg/L}) has two significant figures. Therefore, the propagated uncertainty is rounded to two significant figures: δC=0.010×10−4 mol/L\delta C = 0.010 \times 10^{-4}\text{ mol/L}
  • The measurement and its uncertainty must share the same order of magnitude and decimal place. Expressing both with the factor 10−4 mol/L10^{-4}\text{ mol/L}, the uncertainty terminates at the third decimal place (0.0100.010). Rounding the central value to the third decimal place gives: C=3.431×10−4 mol/LC = 3.431 \times 10^{-4}\text{ mol/L}

Combining the value and its uncertainty gives:

C=(3.431±0.010)×10−4 mol/LC = (3.431 \pm 0.010) \times 10^{-4}\text{ mol/L}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert milligrams to grams, resulting in a molarity and uncertainty that are three orders of magnitude too large.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    C=cM=84.50246.30=0.3431 mol/LC = \frac{c}{M} = \frac{84.50}{246.30} = 0.3431\text{ mol/L}

    Correct

    C=cM=84.50×10−3 g/L246.30 g/mol≈3.431×10−4 mol/LC = \frac{c}{M} = \frac{84.50 \times 10^{-3}\text{ g/L}}{246.30\text{ g/mol}} \approx 3.431 \times 10^{-4}\text{ mol/L}

    You substituted the concentration in milligrams per liter (84.50 mg/L84.50\text{ mg/L}) directly against a molar mass given in grams per mole (246.30 g/mol246.30\text{ g/mol}). Because 1 g=1000 mg1\text{ g} = 1000\text{ mg}, you must convert 84.50 mg/L84.50\text{ mg/L} to 0.08450 g/L0.08450\text{ g/L} so the mass units cancel properly.

  2. Step 2

    δC=δcM=0.25246.30=0.0010 mol/L\delta C = \frac{\delta c}{M} = \frac{0.25}{246.30} = 0.0010\text{ mol/L}

    Correct

    δC=δcM=0.25×10−3 g/L246.30 g/mol≈0.010×10−4 mol/L\delta C = \frac{\delta c}{M} = \frac{0.25 \times 10^{-3}\text{ g/L}}{246.30\text{ g/mol}} \approx 0.010 \times 10^{-4}\text{ mol/L}

    You correctly applied the scaling formula for uncertainty with an exact constant, but omitting the unit conversion factor of 10−3 g/mg10^{-3}\text{ g/mg} caused the propagated uncertainty to be 10310^3 times too large.

  3. Step 3

    C=(0.3431±0.0010) mol/LC = (0.3431 \pm 0.0010)\text{ mol/L}

    Correct

    C=(3.431±0.010)×10−4 mol/LC = (3.431 \pm 0.010) \times 10^{-4}\text{ mol/L}

    You correctly matched the decimal place of the value to the propagated uncertainty, but the values inherit the missing factor of 10−310^{-3}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the relationship C=cMC = \frac{c}{M} to relate mass concentration and molarity.

You correctly applied the uncertainty propagation rule δC=δcM\delta C = \frac{\delta c}{M} for division by an exact constant.

You matched the precision of the nominal concentration with the uncertainty to the appropriate decimal places.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing unit conversion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You divided a mass concentration given in milligrams per liter by a molar mass given in grams per mole without reconciling the mass metric prefixes.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Dimensional Consistency
  • Before calculating molarity from mass concentration (C=c/MC = c / M), express both mass terms in identical units: mg/L×10−3 g/mg=g/L\text{mg/L} \times 10^{-3}\text{ g/mg} = \text{g/L}.

  • Always write explicit units inside calculation steps to verify that g\text{g} cancels g\text{g} and leaves mol/L\text{mol/L}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. c=84.50 mg/L=84.50×10−3 g/L=0.08450 g/Lc = 84.50\text{ mg/L} = 84.50 \times 10^{-3}\text{ g/L} = 0.08450\text{ g/L}

  2. C=0.08450 g/L246.30 g/mol=3.43078×10−4 mol/LC = \frac{0.08450\text{ g/L}}{246.30\text{ g/mol}} = 3.43078 \times 10^{-4}\text{ mol/L}

  3. δc=0.25 mg/L=0.25×10−3 g/L\delta c = 0.25\text{ mg/L} = 0.25 \times 10^{-3}\text{ g/L}

  4. δC=0.25×10−3 g/L246.30 g/mol=1.015×10−6 mol/L=0.01015×10−4 mol/L\delta C = \frac{0.25 \times 10^{-3}\text{ g/L}}{246.30\text{ g/mol}} = 1.015 \times 10^{-6}\text{ mol/L} = 0.01015 \times 10^{-4}\text{ mol/L}

  5. Round δC\delta C to two significant figures (0.010×10−4 mol/L0.010 \times 10^{-4}\text{ mol/L}) and align the central value to the third decimal place.

Final answer

C=(3.431±0.010)×10−4 mol/LC = (3.431 \pm 0.010) \times 10^{-4}\text{ mol/L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Include units in your scratch work fractions to check whether metric prefixes like milli- or micro- cancel out.

  • Practice converting trace concentrations (mg/L and μ\mug/L) into standard SI units before applying formula divisions.

OverviewACEpath Teacher's Diagnosis

02 The student confuses absolute uncertainty with relative uncertainty, reporting the absolute uncertainty as a percentage (δc/c × 100%) rather than converting it to units of mol/L.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    c=84.50 mg/L=0.08450 g/L  ⟹  C=0.08450246.30=3.431×10−4 mol/Lc = 84.50\text{ mg/L} = 0.08450\text{ g/L} \implies C = \frac{0.08450}{246.30} = 3.431 \times 10^{-4}\text{ mol/L}

  2. Step 2

    Uncertainty=0.2584.50×100%=0.30%\text{Uncertainty} = \frac{0.25}{84.50} \times 100\% = 0.30\%

    Correct

    δC=δcM=0.25×10−3 g/L246.30 g/mol≈0.010×10−4 mol/L\delta C = \frac{\delta c}{M} = \frac{0.25 \times 10^{-3}\text{ g/L}}{246.30\text{ g/mol}} \approx 0.010 \times 10^{-4}\text{ mol/L}

    You calculated the relative uncertainty as a percentage (%\%) rather than propagating the absolute uncertainty δC\delta C. When dividing by an exact constant MM, the absolute uncertainty scales directly as δC=δcM\delta C = \frac{\delta c}{M}.

  3. Step 3

    C=3.431×10−4 mol/L±0.30%C = 3.431 \times 10^{-4}\text{ mol/L} \pm 0.30\%

    Correct

    C=(3.431±0.010)×10−4 mol/LC = (3.431 \pm 0.010) \times 10^{-4}\text{ mol/L}

    Because you evaluated the uncertainty as a relative percentage in the previous step, your final reported form does not present the absolute uncertainty with matching units and decimal places.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the mass concentration units from mg/L\text{mg/L} to g/L\text{g/L}.

You applied the relationship between mass concentration and molarity accurately to compute the nominal value.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Absolute vs. relative uncertainty confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused absolute uncertainty (which carries the physical units of the measurement, such as mol/L\text{mol/L}) with relative or percent uncertainty (which is dimensionless, δxx×100%\frac{\delta x}{x} \times 100\%). When scaling a measurement by an exact constant factor k=1Mk = \frac{1}{M}, absolute uncertainty scales directly by that same factor.

REASONING PATH
Your ACEpath teacher’s suggested approach
Absolute vs. Relative Uncertainty
  • Absolute uncertainty δx\delta x shares the physical units of xx, whereas relative uncertainty δxx\frac{\delta x}{x} is dimensionless.

  • Check whether the problem asks for absolute uncertainty or percentage uncertainty, and verify that the final uncertainty shares the physical unit of the measured quantity.

Scaling by an Exact Constant
  • If y=xky = \frac{x}{k} where kk is an exact constant, then δy=δxk\delta y = \frac{\delta x}{k}.

  • Divide the absolute uncertainty δc\delta c (in g/L\text{g/L}) by the molar mass MM (in g/mol\text{g/mol}) to obtain δC\delta C in mol/L\text{mol/L}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the absolute uncertainty δc\delta c into g/L\text{g/L}: δc=0.25 mg/L=0.25×10−3 g/L\delta c = 0.25\text{ mg/L} = 0.25 \times 10^{-3}\text{ g/L}.

  2. Divide by the exact molar mass to propagate the absolute uncertainty into molarity: δC=0.25×10−3 g/L246.30 g/mol≈1.015×10−6 mol/L=0.01015×10−4 mol/L\delta C = \frac{0.25 \times 10^{-3}\text{ g/L}}{246.30\text{ g/mol}} \approx 1.015 \times 10^{-6}\text{ mol/L} = 0.01015 \times 10^{-4}\text{ mol/L}.

  3. Round the uncertainty to two significant figures (matching δc=0.25 mg/L\delta c = 0.25\text{ mg/L}): δC=0.010×10−4 mol/L\delta C = 0.010 \times 10^{-4}\text{ mol/L}.

  4. Align the nominal value and absolute uncertainty to the same decimal place and exponent: C=(3.431±0.010)×10−4 mol/LC = (3.431 \pm 0.010) \times 10^{-4}\text{ mol/L}.

Final answer

C=(3.431±0.010)×10−4 mol/LC = (3.431 \pm 0.010) \times 10^{-4}\text{ mol/L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always check whether the required uncertainty is absolute (matching the quantity's units) or relative/percentage (dimensionless).

  • Practice propagating uncertainties through linear scaling (y=kxy = kx) where δy=k⋅δx\delta y = k \cdot \delta x before attempting multi-variable propagation.

OverviewACEpath Teacher's Diagnosis

03 The student improperly multiplies the mass concentration uncertainty by 1000 instead of dividing by 1000 when converting mg to g, leading to an artificially inflated uncertainty.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    c=84.50 mg/L=0.08450 g/L  ⟹  C=0.08450/246.30=3.431×10−4 mol/Lc = 84.50\text{ mg/L} = 0.08450\text{ g/L} \implies C = 0.08450 / 246.30 = 3.431 \times 10^{-4}\text{ mol/L}

  2. Step 2

    δc=0.25×1000=250 g/L\delta c = 0.25 \times 1000 = 250\text{ g/L}

    Correct

    δc=0.25 mg/L1000 mg/g=0.25×10−3 g/L=2.5×10−4 g/L\delta c = \frac{0.25\text{ mg/L}}{1000\text{ mg/g}} = 0.25 \times 10^{-3}\text{ g/L} = 2.5 \times 10^{-4}\text{ g/L}

    To convert from milligrams to grams, you must divide by 1000 mg/g1000\text{ mg/g} (or multiply by 10−310^{-3}), not multiply by 10001000.

  3. Step 3

    δC=250/246.30=1.015 mol/L\delta C = 250 / 246.30 = 1.015\text{ mol/L}

    Correct

    δC=0.25×10−3 g/L246.30 g/mol≈1.015×10−6 mol/L\delta C = \frac{0.25 \times 10^{-3}\text{ g/L}}{246.30\text{ g/mol}} \approx 1.015 \times 10^{-6}\text{ mol/L}

    Your division formula followed the right relationship, but it inherited the inflated uncertainty value from the incorrect unit conversion.

  4. Step 4

    C=(3.431×10−4±1.015) mol/LC = (3.431 \times 10^{-4} \pm 1.015)\text{ mol/L}

    Correct

    C=(3.431±0.010)×10−4 mol/LC = (3.431 \pm 0.010) \times 10^{-4}\text{ mol/L}

    Because of the earlier conversion error, your reported absolute uncertainty is six orders of magnitude too large and does not match the decimal precision of the nominal value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the central value of the mass concentration from mg/L\text{mg/L} to g/L\text{g/L}.

You applied the correct relationship between mass concentration and molarity (C=cMC = \frac{c}{M}) to find the nominal molarity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Metric Prefix Conversion in Uncertainty

You accidentally multiplied by 10001000 instead of dividing by 10001000 when converting δc\delta c from milligrams to grams.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the unit conversion factor for the uncertainty differently from the central value, forgetting that converting from a smaller metric unit (mg\text{mg}) to a larger base unit (g\text{g}) always requires dividing by 10001000.

REASONING PATH
Your ACEpath teacher’s suggested approach
Consistent Metric Scaling
  • Every part of a measurement (x±δx)(x \pm \delta x) must be scaled by the identical conversion factor.

  • Always apply the exact same dimensional factor: 1 mg=10−3 g1\text{ mg} = 10^{-3}\text{ g} applies equally to both cc and δc\delta c.

Physical Reality Check on Uncertainty
  • An absolute uncertainty should be a small fraction of the measured quantity.

  • Notice that 0.25 mg0.25\text{ mg} is about 0.3%0.3\% of 84.5 mg84.5\text{ mg}, so the resulting molar uncertainty δC\delta C must also be roughly 0.3%0.3\% of CC, not larger than the value itself.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the uncertainty using the factor 10−3 g/mg10^{-3}\text{ g/mg}: δc=0.25×10−3 g/L\delta c = 0.25 \times 10^{-3}\text{ g/L}.

  2. Propagate the uncertainty by dividing by MM: δC=0.25×10−3 g/L246.30 g/mol≈1.015×10−6 mol/L=0.01015×10−4 mol/L\delta C = \frac{0.25 \times 10^{-3}\text{ g/L}}{246.30\text{ g/mol}} \approx 1.015 \times 10^{-6}\text{ mol/L} = 0.01015 \times 10^{-4}\text{ mol/L}.

  3. Round δC\delta C to two significant figures to match the initial uncertainty: δC=0.010×10−4 mol/L\delta C = 0.010 \times 10^{-4}\text{ mol/L}.

  4. Align decimal places to express both with factor 10−410^{-4}: C=(3.431±0.010)×10−4 mol/LC = (3.431 \pm 0.010) \times 10^{-4}\text{ mol/L}.

Final answer

C=(3.431±0.010)×10−4 mol/LC = (3.431 \pm 0.010) \times 10^{-4}\text{ mol/L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that you convert both the central value and the uncertainty with the same unit conversion factor before plugging into formulas.

  • Check relative uncertainty: calculate δcc\frac{\delta c}{c} and make sure δCC\frac{\delta C}{C} is identical when multiplying or dividing by an exact constant.

Lock it in

Similar question

01

A sample contains caffeine (M=194.19 g/molM = 194.19\text{ g/mol}) at a concentration of c=(58.20±0.50) mg/Lc = (58.20 \pm 0.50)\text{ mg/L}. Calculate the molarity and its absolute uncertainty in mol/L\text{mol/L}, assuming MM is an exact constant.

Answer

C=(2.997±0.026)×10−4 mol/LC = (2.997 \pm 0.026) \times 10^{-4}\text{ mol/L}. Convert to g/L\text{g/L}: c=0.05820 g/Lc = 0.05820\text{ g/L} and δc=0.00050 g/L\delta c = 0.00050\text{ g/L}. Then divide by 194.19 g/mol194.19\text{ g/mol}: C≈2.99706×10−4 mol/LC \approx 2.99706 \times 10^{-4}\text{ mol/L} and δC≈2.575×10−6 mol/L=0.026×10−4 mol/L\delta C \approx 2.575 \times 10^{-6}\text{ mol/L} = 0.026 \times 10^{-4}\text{ mol/L}.

02

A river water sample contains lead ions with concentration c=(15.0±0.6) μg/Lc = (15.0 \pm 0.6)\ \mu\text{g/L}. Express this concentration in molarity (mol/L\text{mol/L}) for Pb2+\text{Pb}^{2+} (M=207.2 g/molM = 207.2\text{ g/mol}) with propagated uncertainty, assuming MM is exact.

Answer

C=(7.24±0.29)×10−8 mol/LC = (7.24 \pm 0.29) \times 10^{-8}\text{ mol/L}. Convert μg/L\mu\text{g/L} to g/L\text{g/L} by multiplying by 10−610^{-6}: c=15.0×10−6 g/Lc = 15.0 \times 10^{-6}\text{ g/L}, δc=0.6×10−6 g/L\delta c = 0.6 \times 10^{-6}\text{ g/L}. Dividing by 207.2 g/mol207.2\text{ g/mol} yields C≈7.239×10−8 mol/LC \approx 7.239 \times 10^{-8}\text{ mol/L} and δC≈0.2896×10−8 mol/L\delta C \approx 0.2896 \times 10^{-8}\text{ mol/L}.

03

A pesticide solution has concentration c=(125.0±1.5) mg/Lc = (125.0 \pm 1.5)\text{ mg/L}. A chemist measures molar mass with a non-negligible uncertainty: M=(250.0±0.5) g/molM = (250.0 \pm 0.5)\text{ g/mol}. Determine the molarity CC in mol/L\text{mol/L} and its propagated uncertainty δC\delta C.

Answer

C=(5.000±0.061)×10−4 mol/LC = (5.000 \pm 0.061) \times 10^{-4}\text{ mol/L}. Nominal concentration: C=0.1250 g/L250.0 g/mol=5.000×10−4 mol/LC = \frac{0.1250\text{ g/L}}{250.0\text{ g/mol}} = 5.000 \times 10^{-4}\text{ mol/L}. Relative uncertainty: δCC=(1.5125.0)2+(0.5250.0)2=(0.012)2+(0.002)2≈0.012166\frac{\delta C}{C} = \sqrt{\left(\frac{1.5}{125.0}\right)^2 + \left(\frac{0.5}{250.0}\right)^2} = \sqrt{(0.012)^2 + (0.002)^2} \approx 0.012166. Absolute uncertainty: δC=5.000×10−4×0.012166≈0.061×10−4 mol/L\delta C = 5.000 \times 10^{-4} \times 0.012166 \approx 0.061 \times 10^{-4}\text{ mol/L}.

Loading workspace…