Resources

A standard laboratory protocol introduces 25.0 mL25.0\text{ mL} of concentrated sulfuric acid solution diluted to 15.0 mmol/L15.0\text{ mmol/L} of H2SO4(aq)\text{H}_2\text{SO}_4(aq) to neutralize an aqueous solution containing 30.0 mmol/L30.0\text{ mmol/L} of sodium hydroxide (NaOH(aq)\text{NaOH}(aq)). Treating both proton dissociations of sulfuric acid as completely neutralized by the stoichiometric equivalent of strong base, write the balanced molecular equation with standard integer coefficients and determine the stoichiometric mole ratio of OH−\text{OH}^- to H2SO4\text{H}_2\text{SO}_4.

Answer and steps

Final answer

Molecular: H2SO4(aq)+2NaOH(aq)→Na2SO4(aq)+2H2O(l)\text{H}_2\text{SO}_4(aq) + 2\text{NaOH}(aq) \rightarrow \text{Na}_2\text{SO}_4(aq) + 2\text{H}_2\text{O}(l); Stoichiometric ratio: 2 mol OH−:1 mol H2SO42\text{ mol OH}^- : 1\text{ mol H}_2\text{SO}_4

Steps

01

Identify the Reactants and Nature of the Acid

Sulfuric acid, HX2SOX4\ce{H2SO4}, is a diprotic acid, meaning each molecule can donate two acidic protons (HX+\ce{H+} ions): HX2SOX4(aq)→2 HX+(aq)+SOX4X2−(aq)\ce{H2SO4(aq) -> 2H+(aq) + SO4^{2-}(aq)}

Sodium hydroxide, NaOH\ce{NaOH}, is a strong monoprotic base that dissociates completely in water into sodium ions and hydroxide ions: NaOH(aq)→NaX+(aq)+OHX−(aq)\ce{NaOH(aq) -> Na+(aq) + OH-(aq)}

02

Write the Balanced Molecular Equation

In a full neutralization reaction, each acidic proton combines with a hydroxide ion to form liquid water: HX+(aq)+OHX−(aq)→HX2O(l)\ce{H+(aq) + OH-(aq) -> H2O(l)}

Because each mole of HX2SOX4\ce{H2SO4} releases 2 mol2\text{ mol} of HX+\ce{H+}, it requires 2 mol2\text{ mol} of NaOH\ce{NaOH} to completely neutralize it. The remaining ions (NaX+\ce{Na+} and SOX4X2−\ce{SO4^{2-}}) form aqueous sodium sulfate, NaX2SOX4\ce{Na2SO4}.

Combining these gives the balanced molecular equation with standard integer coefficients: HX2SOX4(aq)+2 NaOH(aq)→NaX2SOX4(aq)+2 HX2O(l)\ce{H2SO4(aq) + 2NaOH(aq) -> Na2SO4(aq) + 2H2O(l)}

03

Determine the Stoichiometric Mole Ratio of OHX−\ce{OH-} to HX2SOX4\ce{H2SO4}

From the dissociation of NaOH\ce{NaOH}, each formula unit of NaOH\ce{NaOH} provides one hydroxide ion (OHX−\ce{OH-}): Moles of OHX−=Moles of NaOH\text{Moles of } \ce{OH-} = \text{Moles of } \ce{NaOH}

Since 2 mol2\text{ mol} of NaOH\ce{NaOH} react per 1 mol1\text{ mol} of HX2SOX4\ce{H2SO4}, the stoichiometric mole ratio is: mol OHX−mol HX2SOX4=21\frac{\text{mol } \ce{OH-}}{\text{mol } \ce{H2SO4}} = \frac{2}{1}

Thus, the stoichiometric mole ratio of OHX−\ce{OH-} to HX2SOX4\ce{H2SO4} is 2 mol OH−:1 mol H2SO42\text{ mol OH}^- : 1\text{ mol H}_2\text{SO}_4.

Common Pitfall: Do not confuse monoprotic neutralization (such as HCl+NaOH→NaCl+HX2O\ce{HCl + NaOH -> NaCl + H2O}) with diprotic neutralization. Failing to account for the second proton of HX2SOX4\ce{H2SO4} would incorrectly suggest a 1:11:1 stoichiometric ratio.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student treats sulfuric acid as a monoprotic acid, producing sodium hydrogen sulfate and concluding a 1:1 mole ratio of OH- to H2SO4.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    HX2SOX4(aq)+NaOH(aq)→NaHSOX4(aq)+HX2O(l)\ce{H2SO4(aq) + NaOH(aq) -> NaHSO4(aq) + H2O(l)}

    Correct

    HX2SOX4(aq)+2 NaOH(aq)→NaX2SOX4(aq)+2 HX2O(l)\ce{H2SO4(aq) + 2NaOH(aq) -> Na2SO4(aq) + 2H2O(l)}

    You wrote an equation representing only partial neutralization to sodium hydrogen sulfate (NaHSOX4\ce{NaHSO4}). Because the prompt specifies complete neutralization of both proton dissociations, each mole of diprotic HX2SOX4\ce{H2SO4} requires 2 mol2\text{ mol} of NaOH\ce{NaOH} to yield NaX2SOX4\ce{Na2SO4} and 2 mol2\text{ mol} of HX2O\ce{H2O}.

  2. Step 2

    1 mol OHX−/1 mol HX2SOX4 (1:1)1\text{ mol }\ce{OH-} / 1\text{ mol }\ce{H2SO4}\text{ (1:1)}

    Correct

    2 mol OHX−:1 mol HX2SOX4 (2:1)2\text{ mol }\ce{OH-} : 1\text{ mol }\ce{H2SO4}\text{ (2:1)}

    You determined the mole ratio based on your equation from Step 1. In complete neutralization, each mole of HX2SOX4\ce{H2SO4} donates 2 mol2\text{ mol} of HX+\ce{H+}, which requires 2 mol2\text{ mol} of OHX−\ce{OH-} ions.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the acid-base neutralization format producing a salt and liquid water.

You included proper state symbols for all species in the molecular reaction.

You deduced a mole ratio that logically followed your written equation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Partial vs. Complete Polyprotic Neutralization

You stopped after transferring only the first acidic proton, forming HSOX4X−\ce{HSO4-} instead of completely neutralizing the acid to SOX4X2−\ce{SO4^{2-}}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated sulfuric acid as a monoprotic acid rather than recognizing that complete neutralization of a diprotic acid requires two hydroxide ions per acid formula unit.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Acid Proticity
  • Sulfuric acid (HX2SOX4\ce{H2SO4}) is diprotic and donates up to two HX+\ce{H+} ions.

  • Count the ionizable protons in the chemical formula before setting stoichiometric coefficients.

Verify Extent of Neutralization
  • Complete neutralization converts polyprotic acids into their fully deprotonated anions (e.g., SOX4X2−\ce{SO4^{2-}}, not HSOX4X−\ce{HSO4-}).

  • Check the prompt wording to see whether complete neutralization or a stoichiometric equivalent of base is specified.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Combine 1 mol1\text{ mol} of diprotic acid HX2SOX4\ce{H2SO4} with 2 mol2\text{ mol} of monoprotic base NaOH\ce{NaOH} to form 1 mol1\text{ mol} of NaX2SOX4\ce{Na2SO4} and 2 mol2\text{ mol} of HX2O\ce{H2O}.

  2. Write the balanced molecular equation: HX2SOX4(aq)+2 NaOH(aq)→NaX2SOX4(aq)+2 HX2O(l)\ce{H2SO4(aq) + 2NaOH(aq) -> Na2SO4(aq) + 2H2O(l)}.

  3. Determine the stoichiometric ratio: each mole of HX2SOX4\ce{H2SO4} consumes 2 mol2\text{ mol} of NaOH\ce{NaOH} (2 mol of OHX−2\text{ mol of }\ce{OH-}), yielding a ratio of 2 mol OHX−:1 mol HX2SOX42\text{ mol }\ce{OH-} : 1\text{ mol }\ce{H2SO4}.

Final answer

Molecular equation: HX2SOX4(aq)+2 NaOH(aq)→NaX2SOX4(aq)+2 HX2O(l)\ce{H2SO4(aq) + 2NaOH(aq) -> Na2SO4(aq) + 2H2O(l)}; Stoichiometric ratio: 2 mol OHX−:1 mol HX2SOX42\text{ mol }\ce{OH-} : 1\text{ mol }\ce{H2SO4}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice identifying whether acids are monoprotic, diprotic, or triprotic from their chemical formulas.

  • Solve problems involving complete neutralization of polyprotic acids like HX2SOX4\ce{H2SO4} and HX3POX4\ce{H3PO4} with group 1 and group 2 metal hydroxides.

OverviewACEpath Teacher's Diagnosis

02 The student writes the inverse ratio of H2SO4 to OH- instead of OH- to H2SO4.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    H2SO4(aq)+2NaOH(aq)→Na2SO4(aq)+2H2O(l)\text{H}_2\text{SO}_4(aq) + 2\text{NaOH}(aq) \rightarrow \text{Na}_2\text{SO}_4(aq) + 2\text{H}_2\text{O}(l)

  2. Step 2

    1 mol OH−/2 mol H2SO4 (1 : 2)1\text{ mol OH}^- / 2\text{ mol H}_2\text{SO}_4\text{ (1 : 2)}

    Correct

    2 mol OH−1 mol H2SO4 or 2:1\frac{2\text{ mol OH}^-}{1\text{ mol H}_2\text{SO}_4}\text{ or } 2 : 1

    You inverted the stoichiometric mole ratio. The balanced equation shows 2 mol2\text{ mol} of NaOH\text{NaOH} (which provides 2 mol2\text{ mol} of OH−\text{OH}^-) reacting with 1 mol1\text{ mol} of H2SO4\text{H}_2\text{SO}_4, so the ratio of OH−\text{OH}^- to H2SO4\text{H}_2\text{SO}_4 is 2:12 : 1, not 1:21 : 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the products of complete neutralization as sodium sulfate and water.

You balanced the chemical equation with the correct stoichiometric coefficients.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Stoichiometric Ratio

You accidentally swapped the numerator and denominator when translating the stoichiometric coefficients into the requested ratio of OH−\text{OH}^- to H2SO4\text{H}_2\text{SO}_4.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the phrasing 'ratio of A to B' (which means moles of Amoles of B\frac{\text{moles of A}}{\text{moles of B}}) by cross-assigning coefficients or writing B over A.

REASONING PATH
Your ACEpath teacher’s suggested approach
Ratio Phrasing Convention
  • The phrase 'ratio of X\text{X} to Y\text{Y}' mathematically means amount of Xamount of Y\frac{\text{amount of X}}{\text{amount of Y}} or X:Y\text{X} : \text{Y}.

  • Always write down the variable expression mol Xmol Y\frac{\text{mol X}}{\text{mol Y}} before substituting numbers from the balanced equation.

Ion Stoichiometry from Coefficients
  • Each formula unit of NaOH\text{NaOH} yields 1 OH−1\text{ OH}^-, so 2 mol NaOH2\text{ mol NaOH} corresponds directly to 2 mol OH−2\text{ mol OH}^-.

  • Verify that the coefficient in front of NaOH\text{NaOH} attaches to OH−\text{OH}^- in the numerator.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that each mole of NaOH\text{NaOH} provides 1 mol1\text{ mol} of OH−\text{OH}^-, so 2 mol of NaOH2\text{ mol of NaOH} contains 2 mol of OH−2\text{ mol of OH}^-.

  2. Set up the requested ratio: mol OH−mol H2SO4=21\frac{\text{mol OH}^-}{\text{mol H}_2\text{SO}_4} = \frac{2}{1}.

Final answer

Molecular: H2SO4(aq)+2NaOH(aq)→Na2SO4(aq)+2H2O(l)\text{H}_2\text{SO}_4(aq) + 2\text{NaOH}(aq) \rightarrow \text{Na}_2\text{SO}_4(aq) + 2\text{H}_2\text{O}(l); Stoichiometric ratio: 2 mol OH−:1 mol H2SO42\text{ mol OH}^- : 1\text{ mol H}_2\text{SO}_4

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting verbal ratio descriptions ('ratio of A to B') directly into explicit fraction templates AB\frac{\text{A}}{\text{B}} before inserting values.

  • Double-check that the species mentioned first in the question prompt is placed in the numerator or first term of the colon notation.

OverviewACEpath Teacher's Diagnosis

03 The student misidentifies the charge of the sulfate ion as -1, incorrectly balancing the sodium salt formula as NaSO4 and finding a 1:1 stoichiometric ratio.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    H2SO4(aq)+NaOH(aq)→NaSO4(aq)+H2O(l)\text{H}_2\text{SO}_4(aq) + \text{NaOH}(aq) \rightarrow \text{NaSO}_4(aq) + \text{H}_2\text{O}(l)

    Correct

    H2SO4(aq)+2NaOH(aq)→Na2SO4(aq)+2H2O(l)\text{H}_2\text{SO}_4(aq) + 2\text{NaOH}(aq) \rightarrow \text{Na}_2\text{SO}_4(aq) + 2\text{H}_2\text{O}(l)

    The sulfate polyatomic ion carries a 2−2- charge (SO42−\text{SO}_4^{2-}), while the sodium ion carries a 1+1+ charge (Na+\text{Na}^+). Balancing the ionic charges requires two sodium ions per sulfate ion, forming Na2SO4\text{Na}_2\text{SO}_4. Because sulfuric acid is diprotic and donates two protons (2H+2\text{H}^+), it requires two formula units of NaOH\text{NaOH} to completely neutralize each molecule of H2SO4\text{H}_2\text{SO}_4, producing 2H2O2\text{H}_2\text{O}.

  2. Step 2

    1:11:1

    Correct

    2:1 (or 2 mol OH−:1 mol H2SO4)2:1\text{ (or }2\text{ mol OH}^- : 1\text{ mol H}_2\text{SO}_4)

    Because this ratio was derived from the unbalanced equation with a 1:11:1 coefficient, the resulting mole ratio of OH−\text{OH}^- to H2SO4\text{H}_2\text{SO}_4 is incorrect.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified sulfuric acid and sodium hydroxide as the reacting acid and base.

You recognized that neutralizing an acid with a hydroxide base produces an aqueous salt and liquid water.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect Polyatomic Ion Charge & Stoichiometry
WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the sulfate ion as having a −1-1 charge instead of −2-2, leading to the incorrect salt formula NaSO4\text{NaSO}_4 and overlooking the diprotic nature of H2SO4\text{H}_2\text{SO}_4, which donates two protons per formula unit.

REASONING PATH
Your ACEpath teacher’s suggested approach
Verify Polyatomic Ion Charges
  • A neutral ionic compound must have a net charge of zero. Since Na+\text{Na}^+ has a +1+1 charge and SO42−\text{SO}_4^{2-} has a −2-2 charge, the neutral salt formula is Na2SO4\text{Na}_2\text{SO}_4.

  • Always check the valence charge of common polyatomic ions before writing the formulas of product salts.

Count Ionizable Protons (Proticity)
  • Each mole of a diprotic acid like H2SO4\text{H}_2\text{SO}_4 releases 2 mol of H+2\text{ mol of H}^+, which requires 2 mol of OH−2\text{ mol of OH}^- for complete neutralization.

  • Check that total H+\text{H}^+ ions donated by the acid match total OH−\text{OH}^- ions supplied by the base in complete neutralization.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Pair the cation Na+\text{Na}^+ with the divalent anion SO42−\text{SO}_4^{2-} to establish the neutral salt formula: Na2SO4\text{Na}_2\text{SO}_4.

  2. Balance the sodium and hydrogen atoms by placing a coefficient of 22 in front of NaOH\text{NaOH} and 22 in front of H2O\text{H}_2\text{O}: H2SO4(aq)+2NaOH(aq)→Na2SO4(aq)+2H2O(l)\text{H}_2\text{SO}_4(aq) + 2\text{NaOH}(aq) \rightarrow \text{Na}_2\text{SO}_4(aq) + 2\text{H}_2\text{O}(l).

  3. Extract the mole ratio of hydroxide ions to sulfuric acid molecules: 2 mol OH−2\text{ mol OH}^- are required per 1 mol H2SO41\text{ mol H}_2\text{SO}_4.

Final answer

Molecular: H2SO4(aq)+2NaOH(aq)→Na2SO4(aq)+2H2O(l)\text{H}_2\text{SO}_4(aq) + 2\text{NaOH}(aq) \rightarrow \text{Na}_2\text{SO}_4(aq) + 2\text{H}_2\text{O}(l); Stoichiometric ratio: 2 mol OH−:1 mol H2SO42\text{ mol OH}^- : 1\text{ mol H}_2\text{SO}_4

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the names and charges of common polyatomic ions, especially sulfate (SO42−\text{SO}_4^{2-}), sulfite (SO32−\text{SO}_3^{2-}), and bisulfate (HSO4−\text{HSO}_4^-).

  • Practice balancing neutralization equations involving polyprotic acids (such as H2SO4\text{H}_2\text{SO}_4 and H3PO4\text{H}_3\text{PO}_4) and polyhydroxy bases (such as Ca(OH)2\text{Ca(OH)}_2).

Lock it in

Similar question

01

Write the balanced molecular equation for the complete neutralization of aqueous phosphoric acid (HX3POX4\ce{H3PO4}) with aqueous potassium hydroxide (KOH\ce{KOH}), and state the mole ratio of KOH\ce{KOH} to HX3POX4\ce{H3PO4}.

Answer

HX3POX4(aq)+3 KOH(aq)→KX3POX4(aq)+3 HX2O(l)\ce{H3PO4(aq) + 3KOH(aq) -> K3PO4(aq) + 3H2O(l)}; Mole ratio is 3 mol KOH:1 mol H3PO43\text{ mol KOH} : 1\text{ mol H3PO4}.

02

A 20.0 mL20.0\text{ mL} sample of 0.050 M HX2SOX40.050\text{ M }\ce{H2SO4} is titrated to the equivalence point with 0.100 M NaOH0.100\text{ M }\ce{NaOH}. Assuming complete neutralization, calculate the volume of NaOH\ce{NaOH} solution in mL\text{mL} needed to reach the equivalence point.

Answer

20.0 mL20.0\text{ mL}. Moles of HX2SOX4=0.0200 L×0.050 M=0.0010 mol\ce{H2SO4} = 0.0200\text{ L} \times 0.050\text{ M} = 0.0010\text{ mol}. Since complete neutralization requires 2 mol NaOH2\text{ mol NaOH} per 1 mol H2SO41\text{ mol H2SO4}, moles of NaOH=0.0020 mol\ce{NaOH} = 0.0020\text{ mol}. Volume =0.0020 mol0.100 M=0.0200 L=20.0 mL= \frac{0.0020\text{ mol}}{0.100\text{ M}} = 0.0200\text{ L} = 20.0\text{ mL}.

03

Write the balanced molecular equation for the complete neutralization reaction between aqueous sulfuric acid (HX2SOX4\ce{H2SO4}) and aqueous barium hydroxide (Ba(OH)X2\ce{Ba(OH)2}), including phase labels. What is the stoichiometric mole ratio of Ba(OH)X2\ce{Ba(OH)2} to HX2SOX4\ce{H2SO4}?

Answer

HX2SOX4(aq)+Ba(OH)X2(aq)→BaSOX4(s)+2 HX2O(l)\ce{H2SO4(aq) + Ba(OH)2(aq) -> BaSO4(s) + 2H2O(l)}; Mole ratio is 1 mol Ba(OH)2:1 mol H2SO41\text{ mol Ba(OH)2} : 1\text{ mol H2SO4} because each formula unit of Ba(OH)X2\ce{Ba(OH)2} supplies two hydroxide ions.

Loading workspace…