Resources

An analytical chemist mixes 40.0 mL40.0\text{ mL} of 0.250 M0.250\text{ M} iron(III) nitrate, Fe(NO3)3\text{Fe}(\text{NO}_3)_3, with 60.0 mL60.0\text{ mL} of 0.300 M0.300\text{ M} sodium hydroxide, NaOH\text{NaOH}. The precipitation reaction occurs according to the net ionic equation: Fe3+(aq)+3OH−(aq)→Fe(OH)3(s)\text{Fe}^{3+}(aq) + 3\text{OH}^-(aq) \rightarrow \text{Fe}(\text{OH})_3(s) Identify the limiting reactant in the precipitation process, and calculate the final molar concentration of the spectator nitrate ions (NO3−\text{NO}_3^-) remaining in the homogeneous mixture after precipitation is complete.

Answer and steps

Final answer

Limiting reactant: OH−\text{OH}^-; Final [NO3−]=0.300 M[\text{NO}_3^-] = 0.300\text{ M}

Steps

01

Calculate the initial moles of reacting ions

Convert the volume of each solution to liters and find the moles of the dissolved compounds using n=M⋅Vn = M \cdot V:

  • Iron(III) nitrate solution: V=40.0 mL=0.0400 LV = 40.0\text{ mL} = 0.0400\text{ L} n(Fe(NOX3)X3)=0.250 M⋅0.0400 L=0.0100 moln(\ce{Fe(NO3)3}) = 0.250\text{ M} \cdot 0.0400\text{ L} = 0.0100\text{ mol}

    Because each formula unit of Fe(NOX3)X3\ce{Fe(NO3)3} dissociates completely into one FeX3+\ce{Fe^{3+}} ion and three NOX3X−\ce{NO3-} ions: n(FeX3+)=0.0100 moln(\ce{Fe^{3+}}) = 0.0100\text{ mol} n(NOX3X−)=3⋅0.0100 mol=0.0300 moln(\ce{NO3^-}) = 3 \cdot 0.0100\text{ mol} = 0.0300\text{ mol}

  • Sodium hydroxide solution: V=60.0 mL=0.0600 LV = 60.0\text{ mL} = 0.0600\text{ L} n(NaOH)=0.300 M⋅0.0600 L=0.0180 moln(\ce{NaOH}) = 0.300\text{ M} \cdot 0.0600\text{ L} = 0.0180\text{ mol}

    Because NaOH\ce{NaOH} dissociates completely into one NaX+\ce{Na+} ion and one OHX−\ce{OH-} ion: n(OHX−)=0.0180 moln(\ce{OH^-}) = 0.0180\text{ mol}


02

Determine the limiting reactant

The balanced net ionic equation for the precipitation is: FeX3+(aq)+3 OHX−(aq)→Fe(OH)X3(s)\ce{Fe^{3+}(aq) + 3OH^-(aq) -> Fe(OH)3(s)}

This equation requires a stoichiometric ratio of 1 mol of FeX3+1\text{ mol of }\ce{Fe^{3+}} to 3 mol of OHX−3\text{ mol of }\ce{OH^-}.

Compare the moles of OHX−\ce{OH^-} required to completely react with the available FeX3+\ce{Fe^{3+}}: Moles of OHX− required=3⋅n(FeX3+)=3⋅0.0100 mol=0.0300 mol\text{Moles of }\ce{OH^-}\text{ required} = 3 \cdot n(\ce{Fe^{3+}}) = 3 \cdot 0.0100\text{ mol} = 0.0300\text{ mol}

Since only 0.0180 mol0.0180\text{ mol} of OHX−\ce{OH^-} is present, which is less than the required 0.0300 mol0.0300\text{ mol}, hydroxide ions (OHX−\ce{OH^-}) will be completely consumed first.

Therefore, OHX−\ce{OH^-} is the limiting reactant (and FeX3+\ce{Fe^{3+}} is present in excess).


03

Calculate the final concentration of spectator nitrate ions (NOX3X−\ce{NO3-})

Nitrate ions (NOX3X−\ce{NO3-}) are spectator ions; they do not participate in precipitation and their quantity remains unchanged throughout the reaction: n(NOX3X−)=0.0300 moln(\ce{NO3^-}) = 0.0300\text{ mol}

Assuming the volumes are additive, find the total volume of the resulting mixture: Vtotal=40.0 mL+60.0 mL=100.0 mL=0.1000 LV_{\text{total}} = 40.0\text{ mL} + 60.0\text{ mL} = 100.0\text{ mL} = 0.1000\text{ L}

Calculate the final molarity of NOX3X−\ce{NO3-}: [NOX3X−]=n(NOX3X−)Vtotal=0.0300 mol0.1000 L=0.300 M[\ce{NO3^-}] = \frac{n(\ce{NO3^-})}{V_{\text{total}}} = \frac{0.0300\text{ mol}}{0.1000\text{ L}} = 0.300\text{ M}

Common Pitfall: Do not forget to account for the subscript in Fe(NOX3)X3\ce{Fe(NO3)3}. Each mole of iron(III) nitrate provides 3 moles3\text{ moles} of nitrate ions, not 1 mole1\text{ mole}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the 1:3 stoichiometry between Fe³⁺ and OH⁻, comparing initial mole quantities directly as 1:1, thereby misidentifying Fe³⁺ as the limiting reactant.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    mol Fe3+=0.0400 L×0.250 M=0.0100 mol  ⟹  mol OH−=0.0600 L×0.300 M=0.0180 mol\text{mol }\text{Fe}^{3+} = 0.0400\text{ L} \times 0.250\text{ M} = 0.0100\text{ mol} \implies \text{mol }\text{OH}^- = 0.0600\text{ L} \times 0.300\text{ M} = 0.0180\text{ mol}

  2. Step 2

    0.0100 mol<0.0180 mol, so Fe3+ is limiting0.0100\text{ mol} < 0.0180\text{ mol}\text{, so }\text{Fe}^{3+}\text{ is limiting}

    Correct

    Moles of OH− required=3×0.0100 mol=0.0300 mol>0.0180 mol available  ⟹  OH− is limiting\text{Moles of }\text{OH}^-\text{ required} = 3 \times 0.0100\text{ mol} = 0.0300\text{ mol} > 0.0180\text{ mol}\text{ available} \implies \text{OH}^-\text{ is limiting}

    You compared the initial mole quantities directly as if the reactants combined in a 1:11:1 ratio. The balanced net ionic equation Fe3+(aq)+3OH−(aq)→Fe(OH)3(s)\text{Fe}^{3+}(aq) + 3\text{OH}^-(aq) \rightarrow \text{Fe}(\text{OH})_3(s) requires 3 moles of OH−3\text{ moles of }\text{OH}^- for every 1 mole of Fe3+1\text{ mole of }\text{Fe}^{3+}. Since 0.0100 mol of Fe3+0.0100\text{ mol of }\text{Fe}^{3+} requires 0.0300 mol of OH−0.0300\text{ mol of }\text{OH}^-, and only 0.0180 mol of OH−0.0180\text{ mol of }\text{OH}^- is available, OH−\text{OH}^- is consumed first and is the true limiting reactant.

  3. Step 3

    mol NO3−=3×0.0100 mol=0.0300 mol  ⟹  Total volume=40.0 mL+60.0 mL=0.100 L  ⟹  [NO3−]=0.0300 mol0.100 L=0.300 M\text{mol }\text{NO}_3^- = 3 \times 0.0100\text{ mol} = 0.0300\text{ mol} \implies \text{Total volume} = 40.0\text{ mL} + 60.0\text{ mL} = 0.100\text{ L} \implies [\text{NO}_3^-] = \frac{0.0300\text{ mol}}{0.100\text{ L}} = 0.300\text{ M}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the initial moles of both reacting species from their volumes and molarities.

You correctly multiplied by the subscript 3 to find the moles of spectator nitrate ions from iron(III) nitrate.

You accurately determined the total volume of the mixture and computed the correct final nitrate molarity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Ignored stoichiometric coefficient in limiting reactant comparison

You compared raw mole quantities (0.0100 mol0.0100\text{ mol} vs. 0.0180 mol0.0180\text{ mol}) without dividing by each reactant's stoichiometric coefficient from the balanced equation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the precipitation reaction as having a 1:1 mole ratio rather than checking the required mole ratio dictated by the balanced equation Fe3++3OH−→Fe(OH)3\text{Fe}^{3+} + 3\text{OH}^- \rightarrow \text{Fe}(\text{OH})_3.

REASONING PATH
Your ACEpath teacher’s suggested approach
Normalize moles by coefficients
  • For a reaction aA+bB→productsa\text{A} + b\text{B} \rightarrow \text{products}, the limiting reactant is the species with the smallest ratio of ncoefficient\frac{n}{\text{coefficient}}.

  • Always divide the available moles of each reactant by its stoichiometric coefficient before comparing which reactant runs out first.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the balanced reaction ratio: n(OH−)n(Fe3+)=31\frac{n(\text{OH}^-)}{n(\text{Fe}^{3+})} = \frac{3}{1}.

  2. Calculate the normalized mole quantity for each reactant: n(Fe3+)1=0.0100 mol1=0.0100 mol\frac{n(\text{Fe}^{3+})}{1} = \frac{0.0100\text{ mol}}{1} = 0.0100\text{ mol}; n(OH−)3=0.0180 mol3=0.0060 mol\frac{n(\text{OH}^-)}{3} = \frac{0.0180\text{ mol}}{3} = 0.0060\text{ mol}.

  3. Compare the normalized values: 0.0060 mol<0.0100 mol0.0060\text{ mol} < 0.0100\text{ mol}, confirming that OH−\text{OH}^- is consumed first.

Final answer

Limiting reactant: OH−\text{OH}^-; Final [NO3−]=0.300 M[\text{NO}_3^-] = 0.300\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Whenever determining a limiting reactant, calculate either the moles of reactant B needed for available reactant A or divide each reactant's moles by its balanced stoichiometric coefficient.

  • Practice identifying limiting reactants in precipitation and acid-base reactions where ion charges lead to non-1:1 ratios (such as 1:21:2 and 1:31:3).

OverviewACEpath Teacher's Diagnosis

02 The student forgets that each mole of Fe(NO₃)₃ produces three moles of NO₃⁻, setting moles of NO₃⁻ equal to moles of Fe(NO₃)₃.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    mol FeX3+=0.0400 L×0.250 M=0.0100 mol  ⟹  mol OHX−=0.0600 L×0.300 M=0.0180 mol  ⟹  mol OHX− needed=3×0.0100 mol=0.0300 mol>0.0180 mol  ⟹  OHX− is limiting\text{mol } \ce{Fe^{3+}} = 0.0400\text{ L} \times 0.250\text{ M} = 0.0100\text{ mol} \implies \text{mol } \ce{OH^-} = 0.0600\text{ L} \times 0.300\text{ M} = 0.0180\text{ mol} \implies \text{mol } \ce{OH^-} \text{ needed} = 3 \times 0.0100\text{ mol} = 0.0300\text{ mol} > 0.0180\text{ mol} \implies \ce{OH^-} \text{ is limiting}

  2. Step 2

    mol NOX3X−=mol Fe(NOX3)X3=0.0100 mol\text{mol } \ce{NO3^-} = \text{mol } \ce{Fe(NO3)3} = 0.0100\text{ mol}

    Correct

    n(NOX3X−)=3×n(Fe(NOX3)X3)=3×0.0100 mol=0.0300 moln(\ce{NO3^-}) = 3 \times n(\ce{Fe(NO3)3}) = 3 \times 0.0100\text{ mol} = 0.0300\text{ mol}

    Each formula unit of iron(III) nitrate contains three nitrate ions: Fe(NOX3)X3(aq)→FeX3+(aq)+3 NOX3X−(aq)\ce{Fe(NO3)3(aq) -> Fe^{3+}(aq) + 3NO3^-(aq)}. Therefore, you must multiply the moles of Fe(NOX3)X3\ce{Fe(NO3)3} by 33 to find the total moles of dissolved NOX3X−\ce{NO3^-}.

  3. Step 3

    Total volume=40.0 mL+60.0 mL=0.100 L  ⟹  [NOX3X−]=0.0100 mol0.100 L=0.100 M\text{Total volume} = 40.0\text{ mL} + 60.0\text{ mL} = 0.100\text{ L} \implies [\ce{NO3^-}] = \frac{0.0100\text{ mol}}{0.100\text{ L}} = 0.100\text{ M}

    Correct

    [NOX3X−]=0.0300 mol0.100 L=0.300 M[\ce{NO3^-}] = \frac{0.0300\text{ mol}}{0.100\text{ L}} = 0.300\text{ M}

    Your dilution method and total volume calculation were completely correct, but the final molarity inherited the error from the incorrect nitrate mole quantity in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately calculated initial moles from solution volumes and concentrations.

You used the stoichiometric ratio correctly to find that OHX−\ce{OH^-} is the limiting reactant.

You recognized that total volume is the sum of the two combined solutions.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometric Subscript Omission in Dissociation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the mole quantity of the polyatomic spectator ion as equal to the mole quantity of the parent salt, overlooking the subscript 3 in Fe(NOX3)X3\ce{Fe(NO3)3}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dissociation Stoichiometry
  • For a strong electrolyte of formula AxByA_x B_y, the moles of ion BB released upon complete dissociation are n(B)=y⋅n(AxBy)n(B) = y \cdot n(A_x B_y).

  • Always write the dissociation equation for soluble salts before calculating spectator ion amounts.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the complete ionic dissociation: Fe(NOX3)X3(aq)→FeX3+(aq)+3 NOX3X−(aq)\ce{Fe(NO3)3(aq) -> Fe^{3+}(aq) + 3NO3^-(aq)}.

  2. Calculate moles of nitrate ions: n(NOX3X−)=3×0.0100 mol=0.0300 moln(\ce{NO3^-}) = 3 \times 0.0100\text{ mol} = 0.0300\text{ mol}.

  3. Divide by total volume: [NOX3X−]=0.0300 mol0.1000 L=0.300 M[\ce{NO3^-}] = \frac{0.0300\text{ mol}}{0.1000\text{ L}} = 0.300\text{ M}.

Final answer

Limiting reactant: OHX−\ce{OH^-}; Final [NOX3X−]=0.300 M[\ce{NO3^-}] = 0.300\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice writing full ionic dissociation equations for salts with polyatomic subscripts, such as AlX2(SOX4)X3\ce{Al2(SO4)3} and Ca(NOX3)X2\ce{Ca(NO3)2}.

  • Highlight subscripts on spectator ions immediately when reading the problem prompt.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to account for volume dilution and assumes the concentration of NO₃⁻ remains based only on the initial 40.0 mL solution volume.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    mol FeX3+=0.0400 L×0.250 M=0.0100 mol  ⟹  mol OHX−=0.0600 L×0.300 M=0.0180 mol\text{mol }\ce{Fe^{3+}} = 0.0400\text{ L} \times 0.250\text{ M} = 0.0100\text{ mol} \implies \text{mol }\ce{OH^-} = 0.0600\text{ L} \times 0.300\text{ M} = 0.0180\text{ mol}

  2. Step 2

    mol OHX− required=3×0.0100 mol=0.0300 mol  ⟹  0.0180 mol available<0.0300 mol, so OHX− is limiting\text{mol }\ce{OH^-}\text{ required} = 3 \times 0.0100\text{ mol} = 0.0300\text{ mol} \implies 0.0180\text{ mol available} < 0.0300\text{ mol},\text{ so }\ce{OH^-}\text{ is limiting}

  3. Step 3

    mol NOX3X−=3×0.0100 mol=0.0300 mol\text{mol }\ce{NO3^-} = 3 \times 0.0100\text{ mol} = 0.0300\text{ mol}

  4. Step 4

    [NOX3X−]=0.0300 mol0.0400 L=0.750 M[\ce{NO3^-}] = \frac{0.0300\text{ mol}}{0.0400\text{ L}} = 0.750\text{ M}

    Correct

    [NOX3X−]=0.0300 mol0.0400 L+0.0600 L=0.0300 mol0.1000 L=0.300 M[\ce{NO3^-}] = \frac{0.0300\text{ mol}}{0.0400\text{ L} + 0.0600\text{ L}} = \frac{0.0300\text{ mol}}{0.1000\text{ L}} = 0.300\text{ M}

    You divided the moles of NOX3X−\ce{NO3^-} by the initial volume of Fe(NOX3)X3\ce{Fe(NO3)3} (0.0400 L0.0400\text{ L}) instead of the combined total volume of both solutions after mixing (0.0400 L+0.0600 L=0.1000 L0.0400\text{ L} + 0.0600\text{ L} = 0.1000\text{ L}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly determined the initial moles of iron(III) and hydroxide ions from the given volumes and concentrations.

You accurately identified that hydroxide is the limiting reactant using the 1:31:3 stoichiometric ratio.

You accounted for the subscript in the chemical formula to find the correct total moles of nitrate spectator ions.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Total Volume Upon Mixing

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You forgot that mixing two aqueous solutions increases the total volume of the homogeneous solution, which dilutes all dissolved ions remaining in the mixture.

REASONING PATH
Your ACEpath teacher’s suggested approach
Total Volume Dilution
  • When two aqueous solutions are combined, the final concentration of any dissolved species is its remaining moles divided by the total solution volume: [ion]=nremainingV1+V2[\text{ion}] = \frac{n_{\text{remaining}}}{V_1 + V_2}.

  • Always sum the volumes of all mixed solutions before computing the final molarity of spectator or excess ions.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine the total volume of the combined mixture: Vtotal=40.0 mL+60.0 mL=100.0 mL=0.1000 LV_{\text{total}} = 40.0\text{ mL} + 60.0\text{ mL} = 100.0\text{ mL} = 0.1000\text{ L}.

  2. Calculate the final concentration of spectator nitrate ions: [NOX3X−]=0.0300 mol0.1000 L=0.300 M[\ce{NO3^-}] = \frac{0.0300\text{ mol}}{0.1000\text{ L}} = 0.300\text{ M}.

Final answer

Limiting reactant: OHX−\ce{OH^-}; Final [NOX3X−]=0.300 M[\ce{NO3^-}] = 0.300\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • When working with precipitation reactions involving mixed solutions, write down Vtotal=V1+V2V_{\text{total}} = V_1 + V_2 as a distinct step before calculating any final concentrations.

  • Practice multi-solution stoichiometry problems to build the automatic habit of using the diluted final volume.

Lock it in

Similar question

01

A student mixes 50.0 mL50.0\text{ mL} of 0.200 M Pb(NO3)20.200\text{ M }\text{Pb}(\text{NO}_3)_2 with 50.0 mL50.0\text{ mL} of 0.300 M NaCl0.300\text{ M }\text{NaCl}. The precipitation reaction is Pb2+(aq)+2Cl−(aq)→PbCl2(s)\text{Pb}^{2+}(aq) + 2\text{Cl}^-(aq) \rightarrow \text{PbCl}_2(s). Identify the limiting reactant.

Answer

Cl−\text{Cl}^- is limiting. Initial moles: n(Pb2+)=0.0500 L×0.200 M=0.0100 moln(\text{Pb}^{2+}) = 0.0500\text{ L} \times 0.200\text{ M} = 0.0100\text{ mol}; n(Cl−)=0.0500 L×0.300 M=0.0150 moln(\text{Cl}^-) = 0.0500\text{ L} \times 0.300\text{ M} = 0.0150\text{ mol}. Required Cl−=2×0.0100 mol=0.0200 mol>0.0150 mol\text{Cl}^- = 2 \times 0.0100\text{ mol} = 0.0200\text{ mol} > 0.0150\text{ mol} available.

02

In the reaction 3Ba2+(aq)+2PO43−(aq)→Ba3(PO4)2(s)3\text{Ba}^{2+}(aq) + 2\text{PO}_4^{3-}(aq) \rightarrow \text{Ba}_3(\text{PO}_4)_2(s), a solution containing 0.0450 mol of Ba2+0.0450\text{ mol of }\text{Ba}^{2+} is combined with a solution containing 0.0350 mol of PO43−0.0350\text{ mol of }\text{PO}_4^{3-}. Determine the limiting reactant and the moles of Ba3(PO4)2(s)\text{Ba}_3(\text{PO}_4)_2(s) produced.

Answer

Ba2+\text{Ba}^{2+} is limiting; 0.0150 mol of Ba3(PO4)20.0150\text{ mol of }\text{Ba}_3(\text{PO}_4)_2 is formed. Compare normalized moles: 0.0450 mol3=0.0150 mol\frac{0.0450\text{ mol}}{3} = 0.0150\text{ mol} for Ba2+\text{Ba}^{2+} versus 0.0350 mol2=0.0175 mol\frac{0.0350\text{ mol}}{2} = 0.0175\text{ mol} for PO43−\text{PO}_4^{3-}. Moles of precipitate =0.0150 mol= 0.0150\text{ mol}.

03

You mix 25.0 mL25.0\text{ mL} of 0.400 M FeCl30.400\text{ M }\text{FeCl}_3 with 75.0 mL75.0\text{ mL} of 0.500 M NaOH0.500\text{ M }\text{NaOH}. After Fe(OH)3(s)\text{Fe}(\text{OH})_3(s) precipitates completely, find the limiting reactant and the molar concentration of the excess reactant ions remaining in solution.

Answer

Fe3+\text{Fe}^{3+} is limiting; final [OH−]=0.0750 M[\text{OH}^-] = 0.0750\text{ M}. Initial n(Fe3+)=0.0250 L×0.400 M=0.0100 moln(\text{Fe}^{3+}) = 0.0250\text{ L} \times 0.400\text{ M} = 0.0100\text{ mol}; initial n(OH−)=0.0750 L×0.500 M=0.0375 moln(\text{OH}^-) = 0.0750\text{ L} \times 0.500\text{ M} = 0.0375\text{ mol}. Moles of OH−\text{OH}^- consumed =3×0.0100 mol=0.0300 mol= 3 \times 0.0100\text{ mol} = 0.0300\text{ mol}. Remaining n(OH−)=0.0375−0.0300=0.00750 moln(\text{OH}^-) = 0.0375 - 0.0300 = 0.00750\text{ mol}. Total volume =0.1000 L= 0.1000\text{ L}. [OH−]=0.00750 mol0.1000 L=0.0750 M[\text{OH}^-] = \frac{0.00750\text{ mol}}{0.1000\text{ L}} = 0.0750\text{ M}.

Loading workspace…