Resources

Ammonia gas is produced industrially by reacting nitrogen and hydrogen gases via the Haber-Bosch process: N2(g)+3H2(g)→2NH3(g)\text{N}_2(g) + 3\text{H}_2(g) \rightarrow 2\text{NH}_3(g) A sealed reaction chamber originally contains 84.06 g84.06\text{ g} of N2\text{N}_2 (molar mass =28.02 g/mol= 28.02\text{ g/mol}) alongside an unknown initial mass of H2\text{H}_2 gas (molar mass =2.016 g/mol= 2.016\text{ g/mol}). If H2\text{H}_2 acts as the limiting reactant and exactly 68.12 g68.12\text{ g} of NH3\text{NH}_3 (molar mass =17.03 g/mol= 17.03\text{ g/mol}) is synthesized at 100%100\% yield, calculate the initial mass of H2\text{H}_2 gas charged into the reactor.

Answer and steps

Final answer

Initial mass of H2=12.10 g\text{H}_2 = 12.10\text{ g}

Steps

01

Calculate the amount of NHX3\ce{NH3} produced in moles

To find the initial mass of hydrogen gas (HX2\ce{H2}), we use stoichiometric principles based on the balanced chemical equation: NX2(g)+3 HX2(g)→2 NHX3(g)\ce{N2(g) + 3H2(g) -> 2NH3(g)}

Using the given mass and molar mass of ammonia:

nNHX3=mass of NHX3molar mass of NHX3=68.12 g17.03 g/mol=4.000 moln_{\ce{NH3}} = \frac{\text{mass of }\ce{NH3}}{\text{molar mass of }\ce{NH3}} = \frac{68.12\text{ g}}{17.03\text{ g/mol}} = 4.000\text{ mol}

02

Determine the moles of HX2\ce{H2} consumed

Because HX2\ce{H2} is the limiting reactant and the reaction proceeds to 100%100\% completion, all initial HX2\ce{H2} is consumed to form the product.

From the stoichiometric coefficients of the balanced equation, 3 mol3\text{ mol} of HX2\ce{H2} produce 2 mol2\text{ mol} of NHX3\ce{NH3}:

nHX2=nNHX3×3 mol HX22 mol NHX3=4.000 mol×32=6.000 moln_{\ce{H2}} = n_{\ce{NH3}} \times \frac{3\text{ mol }\ce{H2}}{2\text{ mol }\ce{NH3}} = 4.000\text{ mol} \times \frac{3}{2} = 6.000\text{ mol}

03

Calculate the initial mass of HX2\ce{H2}

Convert the moles of HX2\ce{H2} to mass using its molar mass (2.016 g/mol2.016\text{ g/mol}):

mHX2=nHX2×MHX2=6.000 mol×2.016 g/mol=12.096 gm_{\ce{H2}} = n_{\ce{H2}} \times M_{\ce{H2}} = 6.000\text{ mol} \times 2.016\text{ g/mol} = 12.096\text{ g}

Rounding to four significant figures gives:

mHX2=12.10 gm_{\ce{H2}} = 12.10\text{ g}

(Verification: The reactor originally contained 84.06 g28.02 g/mol=3.000 mol\frac{84.06\text{ g}}{28.02\text{ g/mol}} = 3.000\text{ mol} of NX2\ce{N2}. Forming 4.000 mol4.000\text{ mol} of NHX3\ce{NH3} requires only 2.000 mol2.000\text{ mol} of NX2\ce{N2}, confirming that NX2\ce{N2} is in excess and HX2\ce{H2} is indeed the limiting reactant.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the stoichiometric mole ratio between H2 and NH3, multiplying by 2/3 instead of 3/2.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    n(NH3)=68.1217.03=4.00 moln(\text{NH}_3) = \frac{68.12}{17.03} = 4.00\text{ mol}

  2. Step 2

    n(H2)=4.00×(23)=2.67 moln(\text{H}_2) = 4.00 \times \left(\frac{2}{3}\right) = 2.67\text{ mol}

    Correct

    nH2=4.000 mol NH3×3 mol H22 mol NH3=6.000 moln_{\text{H}_2} = 4.000\text{ mol }\text{NH}_3 \times \frac{3\text{ mol }\text{H}_2}{2\text{ mol }\text{NH}_3} = 6.000\text{ mol}

    You inverted the mole ratio. According to the balanced equation N2+3H2→2NH3\text{N}_2 + 3\text{H}_2 \rightarrow 2\text{NH}_3, 3 mol3\text{ mol} of H2\text{H}_2 are required to produce 2 mol2\text{ mol} of NH3\text{NH}_3, so you need to multiply by 32\frac{3}{2} rather than 23\frac{2}{3}.

  3. Step 3

    \text{mass of }$$\text{H}_2 = 2.67 ×\times 2.016 = 5.38$\text{ g}$$

    Correct

    m_{H\text{H}_2} = 6.000 mol\text{ mol} ×\times 2.016 g/mol\text{ g/mol} = 12.10 g\text{ g}

    Your formula for converting moles to mass is correct, but the calculated mass is affected by the incorrect mole value from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the given mass of ammonia to moles using its molar mass.

You correctly identified that the limiting reactant determines the amount of reactant consumed and used its molar mass to convert moles to grams.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted stoichiometric mole ratio

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When converting from moles of product to moles of reactant, the target substance coefficient must be in the numerator and the given substance coefficient must be in the denominator ( rac{ ext{wanted}}{ ext{given}}). You inverted this ratio, putting the given product's coefficient in the numerator.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis with Mole Ratios
  • moles of target=moles of given×coefficient of targetcoefficient of given\text{moles of target} = \text{moles of given} \times \frac{\text{coefficient of target}}{\text{coefficient of given}}

  • Always include the formula and units in your conversion factor (for example, 3 mol H22 mol NH3\frac{3\text{ mol }\text{H}_2}{2\text{ mol }\text{NH}_3}) to ensure the unwanted unit cancels out.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. nH2=4.000 mol NH3×3 mol H22 mol NH3=6.000 moln_{\text{H}_2} = 4.000\text{ mol }\text{NH}_3 \times \frac{3\text{ mol }\text{H}_2}{2\text{ mol }\text{NH}_3} = 6.000\text{ mol}

  2. mH2=6.000 mol×2.016 g/mol=12.096 gm_{\text{H}_2} = 6.000\text{ mol} \times 2.016\text{ g/mol} = 12.096\text{ g}

Final answer

Initial mass of H2=12.10 g\text{H}_2 = 12.10\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out full chemical units (e.g., mol H2\text{mol }\text{H}_2 and mol NH3\text{mol }\text{NH}_3) when setting up stoichiometric ratios so that units visibly cancel.

  • Verify that the molar amount of reactant consumed makes intuitive sense relative to the balanced coefficients (33 moles of H2\text{H}_2 must yield fewer moles of NH3\text{NH}_3, so moles of H2\text{H}_2 must be greater than moles of NH3\text{NH}_3).

OverviewACEpath Teacher's Diagnosis

02 The student ignores the stoichiometric coefficients from the balanced equation and assumes a 1:1 mole ratio between H2 and NH3.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    n(NHX3)=68.12/17.03=4.00 moln(\ce{NH3}) = 68.12 / 17.03 = 4.00\text{ mol}

  2. Step 2

    n(HX2)=n(NHX3)=4.00 moln(\ce{H2}) = n(\ce{NH3}) = 4.00\text{ mol}

    Correct

    nHX2=4.000 mol NHX3×3 mol HX22 mol NHX3=6.000 moln_{\ce{H2}} = 4.000\text{ mol }\ce{NH3} \times \frac{3\text{ mol }\ce{H2}}{2\text{ mol }\ce{NH3}} = 6.000\text{ mol}

    From the balanced equation NX2+3 HX2→2 NHX3\ce{N2 + 3H2 -> 2NH3}, 3 moles of HX23\text{ moles of }\ce{H2} are consumed for every 2 moles of NHX32\text{ moles of }\ce{NH3} produced. Setting their mole amounts equal ignores these stoichiometric coefficients.

  3. Step 3

    mass of HX2=4.00×2.016=8.06 g\text{mass of }\ce{H2} = 4.00 \times 2.016 = 8.06\text{ g}

    Correct

    mHX2=6.000 mol×2.016 g/mol=12.10 gm_{\ce{H2}} = 6.000\text{ mol} \times 2.016\text{ g/mol} = 12.10\text{ g}

    You correctly multiplied by the molar mass of HX2\ce{H2}, but the final mass was affected by the incorrect mole quantity from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the moles of ammonia from the provided mass and molar mass.

You used the correct molar mass of hydrogen gas to convert from moles to grams.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted stoichiometric mole ratio

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed reactants and products react in an equimolar (1:11:1) ratio rather than applying the molar ratio given by the balanced chemical equation coefficients.

REASONING PATH
Your ACEpath teacher’s suggested approach
Stoichiometric Mole Ratio
  • Moles required of substance A=Moles of substance B×Coefficient of ACoefficient of B\text{Moles required of substance A} = \text{Moles of substance B} \times \frac{\text{Coefficient of A}}{\text{Coefficient of B}}

  • Always write out the dimensional analysis conversion factor using coefficients directly from the balanced chemical equation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the balanced equation NX2+3 HX2→2 NHX3\ce{N2 + 3H2 -> 2NH3} to relate HX2\ce{H2} and NHX3\ce{NH3}: nHX2=4.000 mol NHX3×3 mol HX22 mol NHX3=6.000 moln_{\ce{H2}} = 4.000\text{ mol }\ce{NH3} \times \frac{3\text{ mol }\ce{H2}}{2\text{ mol }\ce{NH3}} = 6.000\text{ mol}.

  2. Convert moles of HX2\ce{H2} to mass: mHX2=6.000 mol×2.016 g/mol=12.096 g≈12.10 gm_{\ce{H2}} = 6.000\text{ mol} \times 2.016\text{ g/mol} = 12.096\text{ g} \approx 12.10\text{ g}.

Final answer

Initial mass of HX2=12.10 g\ce{H2} = 12.10\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before calculating reactant quantities, highlight the stoichiometric coefficients in the balanced chemical equation.

  • Write out unit conversion factors with substance labels (for example, 3 mol HX22 mol NHX3\frac{3\text{ mol }\ce{H2}}{2\text{ mol }\ce{NH3}}) rather than equating moles directly.

OverviewACEpath Teacher's Diagnosis

03 The student uses the atomic mass of hydrogen (1.008 g/mol) instead of the molar mass of diatomic hydrogen gas H2 (2.016 g/mol).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    n(NHX3)=68.1217.03=4.00 moln(\ce{NH3}) = \frac{68.12}{17.03} = 4.00\text{ mol}

  2. Step 2

    n(HX2)=4.00×(32)=6.00 moln(\ce{H2}) = 4.00 \times \left(\frac{3}{2}\right) = 6.00\text{ mol}

  3. Step 3

    mass of HX2=6.00×1.008=6.05 g\text{mass of }\ce{H2} = 6.00 \times 1.008 = 6.05\text{ g}

    Correct

    mHX2=6.000 mol×2.016 g/mol=12.10 gm_{\ce{H2}} = 6.000\text{ mol} \times 2.016\text{ g/mol} = 12.10\text{ g}

    You multiplied by the atomic mass of hydrogen (1.008 g/mol1.008\text{ g/mol}) instead of the molar mass of molecular hydrogen gas (HX2\ce{H2}, which has a molar mass of 2×1.008 g/mol=2.016 g/mol2 \times 1.008\text{ g/mol} = 2.016\text{ g/mol}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the amount of ammonia produced in moles.

You used the stoichiometric coefficients from the balanced reaction equation to determine the required moles of hydrogen gas.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Atomic vs. Molecular Molar Mass Confusion

You substituted the atomic mass of hydrogen (1.008 g/mol1.008\text{ g/mol}) instead of multiplying by 22 for the diatomic gas HX2\ce{H2} (2.016 g/mol2.016\text{ g/mol}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the atomic mass of an isolated element with the molar mass of its diatomic molecular form (HX2\ce{H2}, NX2\ce{N2}, OX2\ce{O2}, etc.) when converting between moles and grams.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Diatomic Elements
  • Hydrogen gas naturally exists as diatomic molecules, HX2\ce{H2}, with molar mass M=2×1.008 g/mol=2.016 g/molM = 2 \times 1.008\text{ g/mol} = 2.016\text{ g/mol}.

  • Always verify whether the chemical formula represents an isolated atom (H\ce{H}) or a diatomic gas molecule (HX2\ce{H2}) before selecting the molar mass.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the formula of the reactant: hydrogen gas is HX2\ce{H2}, meaning each molecule contains 22 hydrogen atoms.

  2. Use the molar mass of HX2\ce{H2}: MHX2=2×1.008 g/mol=2.016 g/molM_{\ce{H2}} = 2 \times 1.008\text{ g/mol} = 2.016\text{ g/mol}.

  3. Multiply the moles of HX2\ce{H2} by its molecular molar mass: m=6.000 mol×2.016 g/mol=12.096 gm = 6.000\text{ mol} \times 2.016\text{ g/mol} = 12.096\text{ g}, which rounds to 12.10 g12.10\text{ g}.

Final answer

12.10 g12.10\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the common diatomic elements in standard conditions: HX2\ce{H2}, NX2\ce{N2}, OX2\ce{O2}, FX2\ce{F2}, ClX2\ce{Cl2}, BrX2\ce{Br2}, and IX2\ce{I2}.

  • Whenever a problem gives or asks for the mass of a gas like hydrogen, nitrogen, or oxygen, write down its molecular formula first to ensure you use the doubled atomic mass.

Lock it in

Similar question

01

For the reaction 2H2(g)+O2(g)→2H2O(g)2\text{H}_2(g) + \text{O}_2(g) \rightarrow 2\text{H}_2\text{O}(g), how many grams of O2\text{O}_2 (molar mass =32.00 g/mol= 32.00\text{ g/mol}) are consumed to produce 72.08 g72.08\text{ g} of H2O\text{H}_2\text{O} (molar mass =18.02 g/mol= 18.02\text{ g/mol}) at 100%100\% yield?

Answer

nH2O=72.08 g18.02 g/mol=4.000 moln_{\text{H}_2\text{O}} = \frac{72.08\text{ g}}{18.02\text{ g/mol}} = 4.000\text{ mol}. Using the mole ratio 1 mol O22 mol H2O\frac{1\text{ mol }\text{O}_2}{2\text{ mol }\text{H}_2\text{O}}, nO2=4.000×12=2.000 moln_{\text{O}_2} = 4.000 \times \frac{1}{2} = 2.000\text{ mol}. Mass of O2=2.000 mol×32.00 g/mol=64.00 g\text{O}_2 = 2.000\text{ mol} \times 32.00\text{ g/mol} = 64.00\text{ g}.

02

In the combustion reaction 2C2H6(g)+7O2(g)→4CO2(g)+6H2O(g)2\text{C}_2\text{H}_6(g) + 7\text{O}_2(g) \rightarrow 4\text{CO}_2(g) + 6\text{H}_2\text{O}(g), a student collects 1.20 mol1.20\text{ mol} of CO2\text{CO}_2. What mass of ethane, C2H6\text{C}_2\text{H}_6 (molar mass =30.07 g/mol= 30.07\text{ g/mol}), was consumed?

Answer

Using the stoichiometric ratio 2 mol C2H64 mol CO2\frac{2\text{ mol }\text{C}_2\text{H}_6}{4\text{ mol }\text{CO}_2}, nC2H6=1.20 mol×24=0.600 moln_{\text{C}_2\text{H}_6} = 1.20\text{ mol} \times \frac{2}{4} = 0.600\text{ mol}. Mass of C2H6=0.600 mol×30.07 g/mol=18.04 g\text{C}_2\text{H}_6 = 0.600\text{ mol} \times 30.07\text{ g/mol} = 18.04\text{ g}.

03

A mixture of 20.0 g20.0\text{ g} of Al\text{Al} (molar mass =26.98 g/mol= 26.98\text{ g/mol}) and excess Fe2O3\text{Fe}_2\text{O}_3 reacts according to 2Al+Fe2O3→Al2O3+2Fe2\text{Al} + \text{Fe}_2\text{O}_3 \rightarrow \text{Al}_2\text{O}_3 + 2\text{Fe}. If only 25.0 g25.0\text{ g} of Fe\text{Fe} (molar mass =55.85 g/mol= 55.85\text{ g/mol}) is recovered, what is the percent yield of iron?

Answer

nAl=20.0 g26.98 g/mol=0.7413 moln_{\text{Al}} = \frac{20.0\text{ g}}{26.98\text{ g/mol}} = 0.7413\text{ mol}. Theoretical moles of Fe=0.7413 mol Al×2 mol Fe2 mol Al=0.7413 mol\text{Fe} = 0.7413\text{ mol }\text{Al} \times \frac{2\text{ mol Fe}}{2\text{ mol Al}} = 0.7413\text{ mol}. Theoretical mass of Fe=0.7413 mol×55.85 g/mol=41.40 g\text{Fe} = 0.7413\text{ mol} \times 55.85\text{ g/mol} = 41.40\text{ g}. Percent yield =25.0 g41.40 g×100%=60.4%= \frac{25.0\text{ g}}{41.40\text{ g}} \times 100\% = 60.4\%.

Loading workspace…