Resources
Two separate electrolytic cells are wired in series to a single direct-current power supply. Cell A contains an aqueous solution of silver nitrate (), where silver reduces via . Cell B contains an aqueous solution of gold(III) chloride (), where gold reduces via . Over a continuous electrolysis run, exactly of metallic silver (molar mass ) is deposited onto the cathode of Cell A. Determine the mass of gold metal (molar mass ) deposited simultaneously onto the cathode of Cell B.
Answer and steps
Final answer
Steps
Key Principle: Electrolytic Cells in Series
When electrolytic cells are connected in series, the exact same electric current flows through each cell for the same duration. According to Faraday's Laws of Electrolysis, the total quantity of electric charge () and therefore the total moles of electrons () transferred at the electrodes are identical in both cells:
Step 1: Calculate the moles of silver deposited in Cell A
From the given mass and molar mass of silver ():
Step 2: Determine the total moles of electrons passed through the circuit
From the reduction half-reaction occurring in Cell A:
Each mole of deposited silver requires of electrons ():
Step 3: Calculate the moles of gold deposited in Cell B
From the reduction half-reaction occurring in Cell B:
Each mole of gold requires of electrons ():
Common Pitfall: A frequent mistake is assuming equal molar amounts of both metals are deposited. Always account for the different oxidation states (electron stoichiometries ) of the metal cations.
Step 4: Calculate the mass of gold deposited
Multiply the moles of gold by its molar mass ():
Typical errors
01 The student multiplies by the electron coefficient 3 instead of dividing when finding moles of gold from moles of electrons, yielding an erroneously large mass of 26.57 g.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
Because the reduction half-reaction is , each mole of gold requires of electrons. You multiplied by 3 instead of dividing by 3.
- Step 4Correct
You correctly multiplied your calculated moles of gold by its molar mass, but the resulting value is too large due to the error in Step 3.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the moles of silver deposited from its mass and molar mass.
You recognized that cells connected in series pass the exact same amount of electric charge and moles of electrons.
You correctly used the molar mass of gold in the final mass conversion.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou set instead of recognizing that 3 moles of electrons are required to produce only 1 mole of gold, which requires dividing by 3.
REASONING PATH
Your ACEpath teacher’s suggested approach- Dimensional analysis for half-reactions
For a reduction , the conversion factor is .
Always write out the units with conversion factors: .
CORRECTED PATH
ACEpath Teacher's DemonstrationApply the stoichiometric ratio from the reduction half-reaction : .
Calculate the mass of deposited gold: .
02 The student ignores the 1:3 difference in electron stoichiometry between the two half-reactions and assumes an equimolar deposition of silver and gold, calculating 8.86 g of gold.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
In a series circuit, it is the total moles of electrons () that are equal across both cells, not the moles of deposited metal atoms. Since gold reduction requires 3 electrons per atom (), each mole of gold requires three times as many electrons as a mole of silver.
- Step 3Correct
You correctly multiplied your calculated moles by the molar mass of gold, but the value was affected by the incorrect mole quantity from Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the molar quantity of silver deposited from its mass and molar mass.
You correctly identified the formula relating mass, moles, and molar mass for gold.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating equal electric charge in series cells with an equal mole count of deposited metals, omitting the electron stoichiometry () from the balanced reduction half-reactions.
REASONING PATH
Your ACEpath teacher’s suggested approach- Equal Quantity in Series Circuits
Electrolytic cells connected in series share the exact same current () and time (), meaning total charge and total moles of electrons are conserved across cells.
Equate across cells, never the moles of neutral metals directly.
- Relating Metal Moles to Electron Moles
For any half-reaction , the relationship is .
Divide total electron moles by the cation's charge number to find the moles of metal deposited: .
CORRECTED PATH
ACEpath Teacher's DemonstrationFind the moles of electrons passed through Cell A: .
Relate the moles of electrons to gold deposited in Cell B using its 3-electron reduction: .
Calculate the mass of gold deposited: .
03 The student assumes mass deposited is directly proportional to molar mass without accounting for stoichiometry, equating the mass ratio directly to the molar mass ratio and finding 8.86 g.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You set the mass ratio equal to the ratio of molar masses, which assumes that identical moles of and are produced. For cells wired in series, the total moles of transferred electrons are equal, meaning .
- Step 2Correct
Your arithmetic was accurate based on your formula, but the result is three times too large because the factor of electrons per ion was missing.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the molar masses of both silver and gold.
You recognized that cells connected in series share a direct quantitative relationship.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed that equal charge passing through series electrolytic cells yields an equal molar amount of each element, overlooking that the number of electrons transferred per ion () dictates the equivalent weight of each deposited substance.
REASONING PATH
Your ACEpath teacher’s suggested approach- Faraday's Law for Series Cells
For cells connected in series, the identical charge passes through each cell: .
Write the balanced reduction half-reaction for each cathode to identify the moles of electrons transferred per mole of metal ().
- Relating Moles to Mass
, so .
Include the charge factor in the denominator with each molar mass when comparing masses: .
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the reduction half-reactions: () and ().
Equate the total moles of electrons transferred: .
Substitute : .
Solve for : .
Lock it in
For the reduction , what is the formula relating moles of deposited metal to moles of transferred electrons ?
. Dividing by accounts for the fact that each mole of metal requires moles of electrons.
Similar question
Two electrolytic cells are connected in series. Cell 1 contains where copper deposits via . Cell 2 contains where silver deposits via . If of is deposited in Cell 2, calculate the mass of copper (molar mass ) deposited in Cell 1.
Answer
. Moles of electrons passed: . Moles of copper: . Mass of copper: .
A direct current is passed through two electrolytic cells in series. The first cell deposits of aluminum (molar mass ) from molten (). The second cell deposits tin from (molar mass ). Determine the mass of tin deposited over the same time interval.
Answer
. Moles of . Total . Moles of . Mass of .
An unknown metal sulfate solution is placed in series with a nickel cell containing (molar mass of ). During electrolysis, of nickel is plated at the cathode while of metal is deposited in the other cell. Determine the oxidation state of metal cation .
Answer
. Moles of . Since requires , total . For metal , , giving .