Resources

Consider a concentration cell model of crevice corrosion on an iron structural beam at 298 K298\text{ K}. Inside a tight crevice where water is stagnant, the dissolved oxygen concentration drops to an extreme trace limit of [O2]crevice=1.00×10−10 M[\text{O}_2]_{\text{crevice}} = 1.00 \times 10^{-10}\text{ M}. Outside the crevice, the open bulk aerated solution maintains an oxygen concentration of [O2]bulk=2.50×10−4 M[\text{O}_2]_{\text{bulk}} = 2.50 \times 10^{-4}\text{ M}. Assuming both regions share the same neutral electrolyte with constant [OH−]=1.00×10−7 M[\text{OH}^-] = 1.00 \times 10^{-7}\text{ M} and the reduction of oxygen proceeds as O2(aq)+2H2O(l)+4e−→4OH−(aq)\text{O}_2(aq) + 2\text{H}_2\text{O}(l) + 4e^- \rightarrow 4\text{OH}^-(aq) with standard reduction potential E∘=+1.229 VE^\circ = +1.229\text{ V}, calculate the differential aeration electromotive force ΔE=Ecathode−Eanode\Delta E = E_{\text{cathode}} - E_{\text{anode}} (in volts, V\text{V}) generated exclusively by this oxygen concentration gradient.

Answer and steps

Final answer

ΔE=+0.0947 V\Delta E = +0.0947\text{ V}

Steps

01

Identify the Electrodes in a Differential Aeration Cell

In crevice corrosion, differences in dissolved oxygen concentration create a concentration cell:

  • Cathode (higher [OX2][\ce{O2}]): The bulk solution has abundant oxygen, favoring the reduction reaction: OX2(aq)+2 HX2O(l)+4 eX−→4 OHX−(aq)\ce{O2(aq) + 2H2O(l) + 4e- -> 4OH-(aq)}
  • Anode (lower [OX2][\ce{O2}]): Inside the stagnant crevice, oxygen is depleted, giving it a lower reduction potential.

The number of moles of electrons transferred per mole of OX2\ce{O2} reduced is n=4n = 4.


02

Formulate the Potential Difference Using the Nernst Equation

At 298 K298\text{ K}, the Nernst equation for the oxygen reduction half-cell is: E=E∘−0.0592 V4log⁡10([OHX−]4[OX2])E = E^\circ - \frac{0.0592\text{ V}}{4} \log_{10}\left(\frac{[\ce{OH-}]^4}{[\ce{O2}]}\right)

For the cathode (bulk region) and the anode (crevice region): Ecathode=E∘−0.0592 V4log⁡10([OHX−]4[OX2]bulk)E_{\text{cathode}} = E^\circ - \frac{0.0592\text{ V}}{4} \log_{10}\left(\frac{[\ce{OH-}]^4}{[\ce{O2}]_{\text{bulk}}}\right) Eanode=E∘−0.0592 V4log⁡10([OHX−]4[OX2]crevice)E_{\text{anode}} = E^\circ - \frac{0.0592\text{ V}}{4} \log_{10}\left(\frac{[\ce{OH-}]^4}{[\ce{O2}]_{\text{crevice}}}\right)

Subtracting EanodeE_{\text{anode}} from EcathodeE_{\text{cathode}} to find the electromotive force ΔE\Delta E: ΔE=Ecathode−Eanode=0.0592 V4log⁡10([OX2]bulk[OX2]crevice)\Delta E = E_{\text{cathode}} - E_{\text{anode}} = \frac{0.0592\text{ V}}{4} \log_{10}\left(\frac{[\ce{O2}]_{\text{bulk}}}{[\ce{O2}]_{\text{crevice}}}\right)

Key insight: Because both regions share the same [OHX−][\ce{OH-}] and standard potential E∘E^\circ, those terms cancel completely. The electromotive force depends purely on the ratio of dissolved oxygen concentrations.


03

Calculate ΔE\Delta E

Substitute the given oxygen concentrations: [OX2]bulk[OX2]crevice=2.50×10−4 M1.00×10−10 M=2.50×106\frac{[\ce{O2}]_{\text{bulk}}}{[\ce{O2}]_{\text{crevice}}} = \frac{2.50 \times 10^{-4}\text{ M}}{1.00 \times 10^{-10}\text{ M}} = 2.50 \times 10^6

Evaluate the base-10 logarithm: log⁡10(2.50×106)=log⁡10(2.50)+6≈0.3979+6=6.3979\log_{10}(2.50 \times 10^6) = \log_{10}(2.50) + 6 \approx 0.3979 + 6 = 6.3979

Calculate the potential difference: ΔE=0.0592 V4⋅6.3979=0.0148 V⋅6.3979≈+0.0947 V\Delta E = \frac{0.0592\text{ V}}{4} \cdot 6.3979 = 0.0148\text{ V} \cdot 6.3979 \approx +0.0947\text{ V}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses n = 2 instead of n = 4 electrons transferred for the reduction of one mole of O₂, resulting in an electromotive force that is twice the correct value.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔE=(0.05916n)×log⁡([O2]bulk/[O2]crevice)  ⟹  ratio=2.50×10−41.00×10−10=2.50×106\Delta E = \left(\frac{0.05916}{n}\right) \times \log([\text{O}_2]_{\text{bulk}}/[\text{O}_2]_{\text{crevice}}) \implies \text{ratio} = \frac{2.50 \times 10^{-4}}{1.00 \times 10^{-10}} = 2.50 \times 10^6

  2. Step 2

    n=2n = 2

    Correct

    n=4n = 4

    The reduction half-reaction is O2(aq)+2H2O(l)+4e−→4OH−(aq)\text{O}_2(aq) + 2\text{H}_2\text{O}(l) + 4e^- \rightarrow 4\text{OH}^-(aq), which transfers 44 moles of electrons per mole of O2\text{O}_2 reduced.

  3. Step 3

    log⁡(2.50×106)=6.398\log(2.50 \times 10^6) = 6.398

  4. Step 4

    ΔE=(0.059162)×6.398=0.189 V\Delta E = \left(\frac{0.05916}{2}\right) \times 6.398 = 0.189\text{ V}

    Correct

    ΔE=(0.0592 V4)×6.398≈+0.0947 V\Delta E = \left(\frac{0.0592\text{ V}}{4}\right) \times 6.398 \approx +0.0947\text{ V}

    Your arithmetic was carried out correctly using your value of n=2n = 2, but the error in nn propagated to make the final potential twice as large as the true value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the differential aeration cell potential depends on the logarithm of the oxygen concentration ratio.

You calculated the concentration ratio and its base-10 logarithm with high precision.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect number of transferred electrons ($n$)

You assigned n=2n = 2 to the reduction of molecular oxygen instead of reading the stoichiometric coefficient 4e−4e^- from the balanced half-reaction.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You likely associated oxygen with its common −2-2 oxidation state change for a single oxygen atom, forgetting that molecular oxygen (O2\text{O}_2) contains two oxygen atoms (2×2=42 \times 2 = 4 electrons total) when reduced completely to hydroxide.

REASONING PATH
Your ACEpath teacher’s suggested approach
Read $n$ directly from the stoichiometric half-reaction
  • In the Nernst equation, nn is the moles of electrons transferred per mole of the reference reactant as written in the balanced half-cell equation.

  • Always verify the electron coefficient in the balanced equation: O2+2H2O+4e−→4OH−\text{O}_2 + 2\text{H}_2\text{O} + 4e^- \rightarrow 4\text{OH}^- explicitly shows n=4n = 4 electrons per O2\text{O}_2 molecule.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the electron count from O2(aq)+2H2O(l)+4e−→4OH−(aq)\text{O}_2(aq) + 2\text{H}_2\text{O}(l) + 4e^- \rightarrow 4\text{OH}^-(aq), which gives n=4n = 4.

  2. Substitute n=4n = 4 into the cell potential formula: ΔE=(0.0592 V4)×6.398\Delta E = \left(\frac{0.0592\text{ V}}{4}\right) \times 6.398.

  3. Compute: ΔE=0.0148 V×6.398≈+0.0947 V\Delta E = 0.0148\text{ V} \times 6.398 \approx +0.0947\text{ V}.

Final answer

ΔE=+0.0947 V\Delta E = +0.0947\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • When applying the Nernst equation to half-reactions involving diatomic gases (O2,Cl2,H2\text{O}_2, \text{Cl}_2, \text{H}_2), double-check the total electron count across both atoms.

  • Practice recalculating differential aeration potentials with n=4n = 4 to build automatic recall for oxygen reduction.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the concentration ratio in the Nernst equation, treating the crevice as the cathode and calculating a negative electromotive force of -0.0946 V.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔE=(0.059164)×log⁡([O2]crevice[O2]bulk)\Delta E = \left(\frac{0.05916}{4}\right) \times \log\left(\frac{[\text{O}_2]_{\text{crevice}}}{[\text{O}_2]_{\text{bulk}}}\right)

    Correct

    ΔE=(0.05916 V4)log⁡([O2]bulk[O2]crevice)\Delta E = \left(\frac{0.05916\text{ V}}{4}\right) \log\left(\frac{[\text{O}_2]_{\text{bulk}}}{[\text{O}_2]_{\text{crevice}}}\right)

    You placed [O2]crevice[\text{O}_2]_{\text{crevice}} in the numerator instead of [O2]bulk[\text{O}_2]_{\text{bulk}}. In a differential aeration cell, the region with higher oxygen concentration has a higher reduction potential and acts as the cathode, while the oxygen-starved crevice acts as the anode. Subtracting EanodeE_{\text{anode}} from EcathodeE_{\text{cathode}} places [O2]bulk[\text{O}_2]_{\text{bulk}} in the numerator.

  2. Step 2

    ratio=1.00×10−102.50×10−4=4.00×10−7  ⟹  log⁡(4.00×10−7)=−6.398\text{ratio} = \frac{1.00 \times 10^{-10}}{2.50 \times 10^{-4}} = 4.00 \times 10^{-7} \implies \log(4.00 \times 10^{-7}) = -6.398

    Correct

    [O2]bulk[O2]crevice=2.50×10−41.00×10−10=2.50×106  ⟹  log⁡(2.50×106)≈+6.398\frac{[\text{O}_2]_{\text{bulk}}}{[\text{O}_2]_{\text{crevice}}} = \frac{2.50 \times 10^{-4}}{1.00 \times 10^{-10}} = 2.50 \times 10^6 \implies \log(2.50 \times 10^6) \approx +6.398

    Your arithmetic evaluation of the ratio and logarithm is mathematically accurate for your inverted fraction, but the values inherit the inverted setup from Step 1.

  3. Step 3

    ΔE=(0.059164)×(−6.398)=−0.0946 V\Delta E = \left(\frac{0.05916}{4}\right) \times (-6.398) = -0.0946\text{ V}

    Correct

    ΔE=(0.05916 V4)×6.398≈+0.0947 V\Delta E = \left(\frac{0.05916\text{ V}}{4}\right) \times 6.398 \approx +0.0947\text{ V}

    Your arithmetic multiplication is correct for your intermediate value, but the negative sign is the consequence of the inverted ratio.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used n=4n = 4 for the four-electron reduction of diatomic oxygen.

You used the standard Nernst factor of 0.05916 Vn\frac{0.05916\text{ V}}{n} at 298 K298\text{ K}.

You evaluated the base-10 logarithm and completed the arithmetic accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted concentration ratio in differential aeration cell

You inverted the positions of the bulk and crevice concentrations in the logarithmic term, assigning the anode potential to the cathode.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing how reactant concentration affects half-cell reduction potential. According to Le Chatelier's principle and the Nernst equation, higher reactant concentration ([O2][\text{O}_2]) shifts reduction forward and increases the electrode potential (EE). Therefore, the oxygen-rich bulk region is always the cathode (Ecathode>EanodeE_{\text{cathode}} > E_{\text{anode}}), producing a positive driving electromotive force ΔE=Ecathode−Eanode>0\Delta E = E_{\text{cathode}} - E_{\text{anode}} > 0.

REASONING PATH
Your ACEpath teacher’s suggested approach
Anode vs. Cathode in Differential Aeration
  • High [O2]→[\text{O}_2] \rightarrow higher reduction potential (Cathode); Low [O2]→[\text{O}_2] \rightarrow lower reduction potential (Anode).

  • Always verify that the cell potential ΔE=Ecathode−Eanode\Delta E = E_{\text{cathode}} - E_{\text{anode}} for a spontaneous concentration-driven cell is positive by placing the higher concentration in the numerator: ΔE=0.0592 Vnlog⁡([O2]high[O2]low)\Delta E = \frac{0.0592\text{ V}}{n} \log\left(\frac{[\text{O}_2]_{\text{high}}}{[\text{O}_2]_{\text{low}}}\right).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the electrodes: bulk solution has high [O2][\text{O}_2], so it acts as the cathode (EcathodeE_{\text{cathode}}); the crevice has low [O2][\text{O}_2], acting as the anode (EanodeE_{\text{anode}}).

  2. Write the difference in reduction potentials: ΔE=Ecathode−Eanode=0.0592 V4log⁡([O2]bulk[O2]crevice)\Delta E = E_{\text{cathode}} - E_{\text{anode}} = \frac{0.0592\text{ V}}{4} \log\left(\frac{[\text{O}_2]_{\text{bulk}}}{[\text{O}_2]_{\text{crevice}}}\right).

  3. Substitute the given concentrations: [O2]bulk[O2]crevice=2.50×10−4 M1.00×10−10 M=2.50×106\frac{[\text{O}_2]_{\text{bulk}}}{[\text{O}_2]_{\text{crevice}}} = \frac{2.50 \times 10^{-4}\text{ M}}{1.00 \times 10^{-10}\text{ M}} = 2.50 \times 10^6.

  4. Evaluate the logarithm: log⁡10(2.50×106)≈6.398\log_{10}(2.50 \times 10^6) \approx 6.398.

  5. Compute the electromotive force: ΔE=0.0592 V4×6.398≈+0.0947 V\Delta E = \frac{0.0592\text{ V}}{4} \times 6.398 \approx +0.0947\text{ V}.

Final answer

ΔE=+0.0947 V\Delta E = +0.0947\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how concentration cells generate a spontaneous potential where the more concentrated reactant compartment always undergoes reduction (cathode).

  • Practice deriving ΔE\Delta E directly by writing out EcathodeE_{\text{cathode}} and EanodeE_{\text{anode}} separately before subtracting them to avoid ratio inversion errors.

OverviewACEpath Teacher's Diagnosis

03 The student incorrectly uses natural logarithm ln with the 0.05916 constant instead of base-10 log, yielding an overstated cell potential.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔE=(0.059164)×ln⁡([O2]bulk[O2]crevice)\Delta E = \left(\frac{0.05916}{4}\right) \times \ln\left(\frac{[\text{O}_2]_{\text{bulk}}}{[\text{O}_2]_{\text{crevice}}}\right)

    Correct

    ΔE=(0.05916 V4)log⁡10([O2]bulk[O2]crevice)\Delta E = \left(\frac{0.05916\text{ V}}{4}\right) \log_{10}\left(\frac{[\text{O}_2]_{\text{bulk}}}{[\text{O}_2]_{\text{crevice}}}\right) or ΔE=(RT4F)ln⁡([O2]bulk[O2]crevice)\Delta E = \left(\frac{RT}{4F}\right) \ln\left(\frac{[\text{O}_2]_{\text{bulk}}}{[\text{O}_2]_{\text{crevice}}}\right)

    You mixed the base-10 prefactor with the natural logarithm. The constant 0.05916 V0.05916\text{ V} incorporates RTFln⁡(10)\frac{RT}{F} \ln(10), so it must multiply log⁡10\log_{10}, not ln⁡\ln.

  2. Step 2

    ratio=2.50×10−41.00×10−10=2.50×106\text{ratio} = \frac{2.50 \times 10^{-4}}{1.00 \times 10^{-10}} = 2.50 \times 10^6

  3. Step 3

    ln⁡(2.50×106)=14.73\ln(2.50 \times 10^6) = 14.73

    Correct

    log⁡10(2.50×106)≈6.398\log_{10}(2.50 \times 10^6) \approx 6.398

    Your arithmetic evaluation of ln⁡(2.50×106)\ln(2.50 \times 10^6) was accurate, but this step is affected by using the natural logarithm instead of the base-10 logarithm.

  4. Step 4

    ΔE=(0.059164)×14.73=0.218 V\Delta E = \left(\frac{0.05916}{4}\right) \times 14.73 = 0.218\text{ V}

    Correct

    ΔE=(0.05916 V4)×6.398≈+0.0947 V\Delta E = \left(\frac{0.05916\text{ V}}{4}\right) \times 6.398 \approx +0.0947\text{ V}

    Your final calculation reflects the downstream error from using ln⁡\ln, overestimating the potential by a factor of ln⁡(10)≈2.303\ln(10) \approx 2.303.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that n=4n = 4 moles of electrons are transferred per mole of O2\text{O}_2.

You correctly determined that the region with higher oxygen concentration acts as the cathode.

You calculated the ratio of oxygen concentrations accurately as 2.50×1062.50 \times 10^6.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Nernst equation logarithm base mismatch

You wrote ln⁡\ln instead of log⁡10\log_{10} while using the constant 0.05916 V0.05916\text{ V}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the two standard forms of the Nernst equation: the natural logarithm form E=E∘−RTnFln⁡QE = E^\circ - \frac{RT}{nF}\ln Q where RTF≈0.02569 V\frac{RT}{F} \approx 0.02569\text{ V} at 298 K298\text{ K}, versus the base-10 form E=E∘−0.05916 Vnlog⁡10QE = E^\circ - \frac{0.05916\text{ V}}{n}\log_{10} Q where the conversion factor ln⁡(10)≈2.3026\ln(10) \approx 2.3026 is already absorbed into the constant.

REASONING PATH
Your ACEpath teacher’s suggested approach
Logarithm Base Check
  • If the coefficient is 0.0592 Vn\frac{0.0592\text{ V}}{n} (or 0.05916 Vn\frac{0.05916\text{ V}}{n}), use log⁡10\log_{10}. If the coefficient is 0.0257 Vn\frac{0.0257\text{ V}}{n} (or RTnF\frac{RT}{nF}), use ln⁡\ln.

  • Inspect the logarithm symbol every time you use the shortcut 0.0592 V0.0592\text{ V} to confirm you are pressing the log⁡\log key, not the ln⁡\ln key.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the standard base-10 Nernst relation for the concentration cell: ΔE=0.05916 V4log⁡10([O2]bulk[O2]crevice)\Delta E = \frac{0.05916\text{ V}}{4}\log_{10}\left(\frac{[\text{O}_2]_{\text{bulk}}}{[\text{O}_2]_{\text{crevice}}}\right).

  2. Substitute the concentration ratio: log⁡10(2.50×106)=log⁡10(2.50)+6≈0.3979+6=6.3979\log_{10}(2.50 \times 10^6) = \log_{10}(2.50) + 6 \approx 0.3979 + 6 = 6.3979.

  3. Multiply by 0.05916 V4\frac{0.05916\text{ V}}{4}: ΔE=0.01479 V×6.3979≈+0.0947 V\Delta E = 0.01479\text{ V} \times 6.3979 \approx +0.0947\text{ V}.

Final answer

ΔE=+0.0947 V\Delta E = +0.0947\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the pair: 0.05916 V↔log⁡100.05916\text{ V} \leftrightarrow \log_{10} and 0.02569 V↔ln⁡0.02569\text{ V} \leftrightarrow \ln.

  • Practice converting between the two forms using ln⁡(x)=2.3026log⁡10(x)\ln(x) = 2.3026 \log_{10}(x).

  • Check your calculated cell potential for differential aeration cells to ensure it falls within realistic electrochemical ranges (typically 0.05 V0.05\text{ V} to 0.15 V0.15\text{ V} for aeration cells).

Lock it in

Similar question

01

A steel pipe experiences differential aeration corrosion at 298 K298\text{ K}. Outside the pit, [O2]bulk=2.00×10−4 M[\text{O}_2]_{\text{bulk}} = 2.00 \times 10^{-4}\text{ M}. Deep inside the pit, [O2]pit=2.00×10−8 M[\text{O}_2]_{\text{pit}} = 2.00 \times 10^{-8}\text{ M}. Assuming identical, constant [OH−][\text{OH}^-], calculate the electromotive force ΔE\Delta E driving this corrosion cell.

Answer

ΔE=+0.0592 V\Delta E = +0.0592\text{ V}. Key steps: [O2]bulk[O2]pit=2.00×10−42.00×10−8=1.00×104\frac{[\text{O}_2]_{\text{bulk}}}{[\text{O}_2]_{\text{pit}}} = \frac{2.00 \times 10^{-4}}{2.00 \times 10^{-8}} = 1.00 \times 10^4. Then log⁡10(104)=4\log_{10}(10^4) = 4. Using n=4n = 4: ΔE=0.0592 V4×4=0.0592 V\Delta E = \frac{0.0592\text{ V}}{4} \times 4 = 0.0592\text{ V}.

02

In an acidic differential aeration cell at 298 K298\text{ K}, oxygen is reduced according to O2(aq)+4H+(aq)+4e−→2H2O(l)\text{O}_2(aq) + 4\text{H}^+(aq) + 4e^- \rightarrow 2\text{H}_2\text{O}(l). If both regions maintain pH=3.00\text{pH} = 3.00, and [O2][\text{O}_2] is 8.00×10−4 M8.00 \times 10^{-4}\text{ M} in the aerated zone and 5.00×10−7 M5.00 \times 10^{-7}\text{ M} in the deaerated zone, calculate ΔE\Delta E.

Answer

ΔE=+0.0474 V\Delta E = +0.0474\text{ V}. Key steps: Because [H+][\text{H}^+] is uniform, ΔE=0.0592 V4log⁡10(8.00×10−45.00×10−7)=0.0148 V×log⁡10(1600)=0.0148 V×3.2041≈+0.0474 V\Delta E = \frac{0.0592\text{ V}}{4} \log_{10}\left(\frac{8.00 \times 10^{-4}}{5.00 \times 10^{-7}}\right) = 0.0148\text{ V} \times \log_{10}(1600) = 0.0148\text{ V} \times 3.2041 \approx +0.0474\text{ V}.

03

Consider an electrochemical concentration cell at 298 K298\text{ K} based on chlorine gas reduction: Cl2(g)+2e−→2Cl−(aq)\text{Cl}_2(g) + 2e^- \rightarrow 2\text{Cl}^-(aq) with uniform [Cl−]=0.10 M[\text{Cl}^-] = 0.10\text{ M}. If PCl2,high=1.00 atmP_{\text{Cl}_2,\text{high}} = 1.00\text{ atm} and PCl2,low=1.00×10−3 atmP_{\text{Cl}_2,\text{low}} = 1.00 \times 10^{-3}\text{ atm}, calculate the cell potential EcellE_{\text{cell}} and state the value of nn.

Answer

n=2n = 2, Ecell=+0.0888 VE_{\text{cell}} = +0.0888\text{ V}. Key steps: Reduction of one mole of Cl2\text{Cl}_2 involves 2e−2e^-, so n=2n = 2. Ecell=0.0592 V2log⁡10(1.001.00×10−3)=0.0296 V×3=+0.0888 VE_{\text{cell}} = \frac{0.0592\text{ V}}{2} \log_{10}\left(\frac{1.00}{1.00 \times 10^{-3}}\right) = 0.0296\text{ V} \times 3 = +0.0888\text{ V}.

Loading workspace…