Resources
An engineer considers protecting an underground iron pipe against corrosion by connecting it either to a block of metallic zinc (galvanization/sacrificial anode) or a block of metallic copper. The relevant standard reduction potentials are , , and . (a) Calculate the standard cell electromotive force for the galvanic couple between and , and identify which metal functions as the anode. (b) If the iron pipe is instead coupled to copper in the presence of aerated moisture, calculate the standard driving potential for the galvanic cell where iron corrodes while copper serves as an inert cathode site, and state whether copper accelerates or prevents iron corrosion.
Answer and steps
Final answer
(a) , serves as the sacrificial anode (corrodes preferentially, protecting ); (b) , copper acts as a more noble cathode that dramatically accelerates the galvanic corrosion rate of the iron anode.
Steps
Part (a): Galvanic Coupling of Iron and Zinc
-
Compare standard reduction potentials: The standard reduction potentials are given as:
A metal with a more negative standard reduction potential has a greater thermodynamic tendency to lose electrons (undergo oxidation). Because , zinc is more active (less noble) than iron.
-
Identify the anode and cathode:
- Anode (oxidation):
- Cathode (reduction site): acts as the cathode site, remaining protected from oxidation.
Therefore, serves as the sacrificial anode.
- Calculate the standard cell potential (): Using the standard relationship :
Part (b): Galvanic Coupling of Iron and Copper
-
Compare standard reduction potentials: The standard reduction potentials are:
Since , copper is more noble, while iron has the more negative reduction potential and oxidizes preferentially.
- Calculate the driving potential (): When copper acts as the cathode site and iron acts as the anode:
- Effect on corrosion: Connecting iron to a more noble metal like copper sets up a galvanic cell with a strong thermodynamic driving force (). Copper provides an efficient cathodic surface for depolarizing reduction reactions (such as oxygen reduction in aerated moisture), which pulls electrons away from iron and dramatically accelerates the corrosion rate of the iron anode. Copper does not protect the iron pipe; instead, it causes severe galvanic corrosion.
Typical errors
01 The student confuses the cell potential formula by reversing the cathode and anode potentials, resulting in a negative cell emf.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
is oxidized so is the anode, is the cathode. ⟹ The anode is .
- Step 2Correct
The standard cell potential for a galvanic cell is defined as (reduction minus oxidation). Reversing the terms yielded a negative potential for a spontaneous process.
- Step 3Correct
You repeated the reversed formula. Because copper acts as the cathode site and iron oxidizes as the anode, the driving potential is .
- Step 4
Since copper provides an inert contact, it accelerates corrosion.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified zinc as the sacrificial anode because of its more negative reduction potential.
You correctly identified that iron serves as the anode when coupled with copper.
You correctly concluded that metallic copper accelerates the galvanic corrosion of iron.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeSubtracting the cathode potential from the anode potential instead of subtracting the anode potential from the cathode potential.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating the standard reduction potential difference formula () with oxidation potential addition or simple left-to-right subtraction, missing the thermodynamic requirement that a spontaneous galvanic cell must have .
REASONING PATH
Your ACEpath teacher’s suggested approach- Spontaneous Cell Potential Sign
A spontaneous galvanic reaction always has a positive standard cell potential ().
Whenever you calculate for a spontaneous galvanic couple, immediately check that the resulting value is positive.
- Reduction Potential Difference Formula
Using standard reduction potentials directly, (or ).
Write down the mnemonic 'Cathode minus Anode' (or 'Red Cat': Reduction at Cathode) before plugging in reduction potential values.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the standard reduction potential formula: .
For part (a), substitute as cathode and as anode: .
For part (b), substitute as cathode and as anode: .
(a) , is the anode; (b) , copper accelerates corrosion.
02 The student misidentifies the metal with the higher standard reduction potential as the sacrificial anode, choosing Fe over Zn.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Since , has higher potential and acts as the anode. The anode is .
CorrectSince , zinc is more easily oxidized and acts as the anode (sacrificial anode).
Oxidation occurs at the anode. The species with the more negative (lower) standard reduction potential has the stronger tendency to lose electrons and oxidize, which means zinc acts as the anode.
- Step 2Correct
A spontaneous galvanic couple always has a positive standard cell potential (). Because iron acts as the cathode site and zinc oxidizes as the anode, .
- Step 3
corrodes at the anode and acts as cathode. Copper accelerates iron corrosion.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that iron serves as the anode when coupled to copper in part (b).
You correctly calculated the positive driving potential of for the - couple.
You correctly concluded that coupling iron to copper accelerates corrosion rather than preventing it.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeIn part (a), you associated higher reduction potential with the anode instead of the cathode, leading to an anode of and a negative cell potential.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating standard reduction potential with tendency toward oxidation: a more positive reduction potential means a species is more easily reduced (cathode), whereas a more negative reduction potential means a species is more easily oxidized (anode).
REASONING PATH
Your ACEpath teacher’s suggested approach- Anode vs. Cathode Potential Rule
In a spontaneous galvanic cell, the half-cell with the lower (more negative) undergoes oxidation (anode), while the half-cell with the higher (more positive) undergoes reduction (cathode).
Compare reduction potentials: the more negative value is the anode, and the more positive value is the cathode.
- Galvanic Cell Spontaneity Sanity Check
A galvanic couple operates spontaneously, meaning its cell potential must be positive ().
If your calculated cell potential is negative, recheck whether you inverted the anode and cathode.
CORRECTED PATH
ACEpath Teacher's DemonstrationCompare the reduction potentials: and .
Because , zinc has the lower reduction potential, meaning it oxidizes more readily and functions as the sacrificial anode.
Calculate the galvanic couple potential: .
(a) , serves as the sacrificial anode; (b) , copper accelerates iron corrosion.
03 The student mistakenly believes that coupling any metal to iron provides galvanic cathodic protection, concluding copper prevents corrosion.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
Because iron is the anode in this couple, oxidation occurs at the iron metal (). Connecting iron to a more noble metal such as copper provides a large cathodic surface area with a driving potential of , which drastically speeds up (accelerates) the oxidation of iron rather than protecting it.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the anode and cathode based on standard reduction potentials for both metal couples.
You calculated both standard cell potentials accurately using the correct subtraction order.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed that attaching any external metal block functions as cathodic protection. In reality, a metal block only protects iron if it has a more negative reduction potential than iron (sacrificial anode). When coupled to a metal with a higher reduction potential like copper, iron becomes the anode and undergoes accelerated galvanic corrosion.
REASONING PATH
Your ACEpath teacher’s suggested approach- Cathodic Protection Requirement
A metal provides sacrificial cathodic protection to iron only if .
Check if the attached metal has a more negative reduction potential than iron before concluding it protects the iron.
- Galvanic Corrosion at the Anode
Oxidation always occurs at the anode (), meaning the anode material corrodes.
Since you identified iron as the anode when coupled to copper, conclude that iron oxidizes and its corrosion rate increases.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify which metal undergoes oxidation: since iron is the anode, the oxidation reaction is .
Determine the role of copper: copper has a more positive reduction potential (), serving as a cathode where reduction (such as ) occurs readily.
Evaluate the effect on corrosion: coupling iron to copper creates a galvanic cell with a driving force, drawing electrons away from iron and drastically accelerating its corrosion.
Copper accelerates iron corrosion.
Lock it in
What is the standard formula to calculate cell potential using standard reduction potentials?
(Reduction potential of reduction half-reaction minus reduction potential of oxidation half-reaction).
Similar question
A titanium implant () is accidentally coupled in saline to a nickel screw (). Identify the anode and calculate the standard driving potential .
Answer
is the anode ( is more negative, so it oxidizes preferentially). .
An underground storage tank made of steel/iron () is protected using a magnesium sacrificial anode (). Calculate the driving potential of this galvanic couple and confirm that it is thermodynamically spontaneous.
Answer
is the anode (oxidation) and acts as the cathode (reduction site). . Because (and ), the sacrificial protection reaction is thermodynamically spontaneous.
In an acidic environment, an iron pipe () is connected to a lead component () while hydrogen evolution occurs at the cathode (). (a) Calculate if iron corrosion couples directly with reduction. (b) Explain why coupling iron to lead increases the rate of iron oxidation compared to isolated iron.
Answer
(a) . (b) Lead is more noble than iron (higher reduction potential), so it acts as an efficient electrical cathode site that draws electrons away from iron, accelerating iron dissolution into .