Resources
A steel storage tank buried in moist soil at is exposed to aerobic conditions at neutral , where dissolved oxygen reduction () couples with iron oxidation (). To prevent anodic dissolution of iron, cathodic protection is applied via an external DC power source. The threshold for thermodynamic immunity against corrosion is reached when the iron dissolution half-reaction is brought to equilibrium with a microscopic threshold concentration of . Calculate the maximum cathodic electrode potential (in volts versus SHE) to which the steel structure must be polarized at to satisfy this anti-corrosion threshold criterion.
Answer and steps
Final answer
Steps
Identify the Relevant Redox Couple and Half-Reaction
To achieve thermodynamic immunity from corrosion via cathodic protection, the steel structure must be polarized to an electrical potential where the spontaneous dissolution of iron into is suppressed below the corrosion threshold concentration of .
Cathodic protection shifts the steel's potential into the domain where metallic iron is stable relative to dissolved iron ions. The reversible half-reaction written as a reduction is:
The standard reduction potential for this couple is: The number of electrons transferred per iron atom is .
Apply the Nernst Equation
At , the equilibrium potential for a half-cell reduction is determined by the Nernst equation:
For the reduction , the activity of the pure solid iron is , giving the reaction quotient:
Substituting into the equation:
Compute the Threshold Potential
Substitute the given values into the simplified Nernst relationship:
Pitfall to Avoid
- Although the external environment contains dissolved oxygen reducing at neutral , thermodynamic immunity against metal loss specifically requires shifting the metal potential to or below the equilibrium potential of the metal's own oxidation/reduction couple at the threshold concentration, rather than matching the oxygen couple.
Thus, the maximum cathodic electrode potential required to maintain thermodynamic immunity is:
Typical errors
01 The student uses the wrong sign in the Nernst equation by writing the reaction quotient Q as 1/[Fe²⁺] while adding rather than subtracting the logarithmic term.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
The standard form of the Nernst equation is . With , the logarithmic term must be subtracted, not added.
- Step 3Correct
Your arithmetic follows correctly from the formula written in step 2, but the sign error carries through to the final value.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the reduction of to metallic as the relevant half-reaction.
You correctly determined that two electrons are transferred per iron atom.
You correctly evaluated the logarithm .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou paired a positive sign () with the standard reaction quotient , confusing the subtracted form with the expanded form .
REASONING PATH
Your ACEpath teacher’s suggested approach- Standard Nernst Equation Sign
, where .
Always write the general minus sign first before simplifying logarithmic fractions.
- Qualitative Sanity Check for Dilute Reactants
Decreasing the concentration of an oxidized species (reactant) makes reduction less favorable, driving more negative.
Check whether lower lowers below .
CORRECTED PATH
ACEpath Teacher's DemonstrationStart from the standard Nernst relation: .
Rewrite using logarithm properties: .
Substitute : .
Calculate the threshold potential: .
02 The student uses n = 4 in the Nernst equation by confusing the electron transfer of oxygen reduction with that of the iron half-reaction.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
](streamdown:incomplete-link)
- Step 2Correct
Thermodynamic immunity depends strictly on the equilibrium of the metal half-reaction , for which . The value belongs to the external oxygen reduction reaction, not the iron half-cell.
- Step 3Correct
Your arithmetic and logarithm evaluation were carried out cleanly, but using propagated into the final numerical value.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the Nernst equation for the reduction couple.
You properly inverted the concentration term inside the logarithm to evaluate .
You completed the downstream arithmetic steps accurately based on your chosen parameters.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted from the coupled oxygen reduction half-reaction instead of from the iron half-reaction being controlled.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisIn cathodic protection, the required polarization potential is governed by the equilibrium of the metal being protected (the half-reaction whose dissolution is being suppressed), not the overall coupled redox cell or the cathodic depolarizer (oxygen). Therefore, must always match the stoichiometry of the metal's own oxidation/reduction couple.
REASONING PATH
Your ACEpath teacher’s suggested approach- Select the Target Half-Reaction
Thermodynamic immunity criteria apply to the metal dissolution couple .
Always take and directly from the metal dissolution half-reaction, regardless of what oxidizer exists in the environment.
- Confirm Electron Count in Half-Cell Nernst Equations
For single-electrode equilibrium, equals the stoichiometric electrons in that specific half-cell equation.
Write out explicitly and set before substituting into the pre-factor.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the reduction half-reaction for iron dissolution: , which yields .
Substitute and into the Nernst equation: .
Compute the logarithmic term: .
Multiply and evaluate: .
03 The student calculates the cell potential coupled to oxygen reduction instead of the single electrode potential for the iron half-cell.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Cathodic protection depends exclusively on polarizing the iron electrode relative to its own reversible half-reaction, . You do not need to couple this to the oxygen reduction half-cell or calculate an overall cell potential.
- Step 2Correct
Because you evaluated a full corrosion cell rather than the single-electrode half-cell, your Nernst equation evaluated the overall cell EMF rather than the iron half-cell equilibrium potential.
- Step 3Correct
Polarizing steel to would make it heavily anodic and drastically accelerate corrosion. To achieve thermodynamic immunity, the potential must be made more negative than the equilibrium potential of iron dissolution, vs. SHE.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that iron dissolution involves a two-electron transfer ().
You correctly substituted the threshold ion concentration of into the logarithmic term.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the overall spontaneous corrosion cell voltage () with the single-electrode potential () needed to achieve thermodynamic immunity on a Pourbaix diagram. For cathodic protection, immunity is achieved when the metal's potential is depressed below the reversible Nernst potential of its own oxidation/reduction couple, completely independent of the driving potential of external oxidizers like dissolved .
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify Immunity Criterion
Thermodynamic immunity for a metal requires at the specified threshold concentration .
Apply the Nernst equation directly to the metal half-reaction rather than combining it with an environmental oxidizer.
- Verify Sign and Direction of Polarization
Cathodic protection always shifts an electrode potential in the negative (cathodic) direction relative to its open-circuit potential.
Check that your calculated protective threshold potential is negative versus SHE (typically between and for steel). An anodic potential like indicates aggressive corrosion rather than protection.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify the relevant half-reaction for iron immunity: with and .
Set up the Nernst equation for the reduction half-cell: .
Substitute and : .
Lock it in
What is the standard form of the Nernst equation at using base-10 logarithm?
, where is the reaction quotient .
Similar question
A zinc electrode is placed in a solution with at . Given , calculate the equilibrium reduction potential vs. SHE.
Answer
. Key steps: For , . .
To prevent corrosion of a copper pipe exposed to water, the active copper concentration must be kept at . Given at , find the threshold cathodic protection potential vs. SHE.
Answer
. Key steps: .
An underground pipeline made of lead () is under cathodic protection at . The protection criterion requires thermodynamic immunity with . If , determine the maximum applied potential versus a saturated calomel electrode (SCE, vs. SHE).
Answer
vs. SCE. Key steps: First, vs. SHE. Then convert: vs. SCE.