Resources

At what critical molecular threshold do London dispersion forces between nonpolar molecules overcome the dipole-dipole and hydrogen-bonding interactions of small polar molecules? Specifically, compare solid iodine (I2\text{I}_2, nonpolar, molar mass 253.8 g/mol253.8\text{ g/mol}) and liquid water (H2O\text{H}_2\text{O}, polar, molar mass 18.02 g/mol18.02\text{ g/mol}) at 25.0∘C25.0^\circ\text{C} and 1.00 atm1.00\text{ atm}. Given that I2\text{I}_2 is a solid (melting point 113.7∘C113.7^\circ\text{C}) while H2O\text{H}_2\text{O} is a liquid (melting point 0.0∘C0.0^\circ\text{C}), calculate the ratio of total electrons in an I2\text{I}_2 molecule to that in an H2O\text{H}_2\text{O} molecule, and identify the physical boundary condition where polarizability dominates over strong permanent dipole-dipole/hydrogen bonding.

Answer and steps

Final answer

Ratio of electrons: 10610=10.6\frac{106}{10} = 10.6; The threshold occurs when the electron cloud of a nonpolar molecule becomes sufficiently large and diffuse (high polarizability due to 106106 electrons vs. 1010 electrons in H2O\text{H}_2\text{O}) such that the cumulative, instantaneous London dispersion attractions exceed the network hydrogen bonding per molecule, resulting in a higher melting point (113.7∘C>0.0∘C113.7^\circ\text{C} > 0.0^\circ\text{C}) and solid phase at 25.0∘C25.0^\circ\text{C}.

Steps

01

Calculate the Total Number of Electrons and Their Ratio

The strength of London dispersion forces depends directly on molecular polarizability, which increases with the number of electrons and the volume of the electron cloud.

  1. Electrons in an Iodine Molecule (IX2\ce{I2}):

    • Iodine (I\ce{I}) has an atomic number of Z=53Z = 53.
    • A diatomic iodine molecule contains: Ne−(IX2)=2×53=106 electronsN_{e^-}(\ce{I2}) = 2 \times 53 = 106\text{ electrons}
  2. Electrons in a Water Molecule (HX2O\ce{H2O}):

    • Hydrogen (H\ce{H}) has Z=1Z = 1, and oxygen (O\ce{O}) has Z=8Z = 8.
    • A water molecule contains: Ne−(HX2O)=2(1)+8=10 electronsN_{e^-}(\ce{H2O}) = 2(1) + 8 = 10\text{ electrons}
  3. Electron Ratio: Ratio=Ne−(IX2)Ne−(HX2O)=10610=10.6\text{Ratio} = \frac{N_{e^-}(\ce{I2})}{N_{e^-}(\ce{H2O})} = \frac{106}{10} = 10.6

02

Compare Intermolecular Forces and Polarizability

  • Water (HX2O\ce{H2O}): Water exhibits strong hydrogen bonding and permanent dipole-dipole interactions. However, its electron cloud consists of only 1010 electrons tightly held by a strongly electronegative oxygen nucleus, giving it relatively low polarizability.
  • Iodine (IX2\ce{I2}): Iodine is completely nonpolar, meaning it possesses zero permanent dipole moment and relies solely on London dispersion forces. However, it contains 106106 electrons distributed over large, diffuse principal energy levels (n=5n = 5). This large, loosely held electron cloud makes IX2\ce{I2} exceptionally polarizable.

03

Identify the Physical Boundary Condition

A common misconception is that hydrogen bonding is always stronger than London dispersion forces. While hydrogen bonding is stronger on a per-contact basis between molecules of comparable size, London dispersion forces scale extensively with molecular size and polarizability.

  • Threshold Condition: When a nonpolar molecule possesses an electron cloud sufficiently large and diffuse (in this case, over 1010 times more electrons than the polar molecule), the cumulative strength of instantaneous, induced dipole-induced dipole interactions exceeds the permanent dipole-dipole and hydrogen-bonding network of the small molecule.
  • Macroscopic Evidence:
    • The melting point of nonpolar IX2\ce{I2} is 113.7∘C113.7^\circ\text{C}, whereas that of polar HX2O\ce{H2O} is 0.0∘C0.0^\circ\text{C}.
    • At standard ambient temperature and pressure (25.0∘C25.0^\circ\text{C}, 1.00 atm1.00\text{ atm}), the cumulative London dispersion forces in IX2\ce{I2} are strong enough to lock molecules into a crystalline solid lattice, while HX2O\ce{H2O} remains a liquid.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student calculates the ratio of valence electrons rather than total electrons, finding a ratio of 1.75.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Valence electrons in I2=2×7=14\text{I}_2 = 2 \times 7 = 14   ⟹  \implies Valence electrons in H2O=2(1)+6=8\text{H}_2\text{O} = 2(1) + 6 = 8   ⟹  \implies Ratio=148=1.75\text{Ratio} = \frac{14}{8} = 1.75

    Correct

    Ne−(I2)=2(53)=106N_{e^-}(\text{I}_2) = 2(53) = 106   ⟹  \implies Ne−(H2O)=2(1)+8=10N_{e^-}(\text{H}_2\text{O}) = 2(1) + 8 = 10   ⟹  \implies Ratio=10610=10.6\text{Ratio} = \frac{106}{10} = 10.6

    You calculated the valence electron ratio instead of the total electron ratio. Molecular polarizability scales with the total number of electrons in the entire electron cloud, not just the outermost valence shell.

  2. Step 2

    Dispersion forces overcome hydrogen bonding when high polarizability from a much larger, more easily distorted electron cloud produces London dispersion forces stronger than localized hydrogen bonds.

WHAT YOU DID WELL
Compliments from Your Teacher

You clearly explained how polarizability and electron cloud distortion dictate the strength of London dispersion forces.

You correctly counted the valence electrons of both diatomic iodine and water.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Valence vs. Total Electrons in Polarizability

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated chemical reactivity (which depends on valence electrons) with molecular polarizability (which depends on the total electron count and volume of the entire electron cloud).

REASONING PATH
Your ACEpath teacher’s suggested approach
Total Electrons vs. Valence Electrons
  • Polarizability depends on the total number of electrons (ZZ) distributed across all principal shells, not just valence electrons.

  • Check whether a physical property depends on core-plus-valence electrons (like polarizability and mass attenuation) or only outer-shell electrons (like Lewis structures and bonding).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the atomic numbers from the periodic table: for iodine, Z=53Z = 53; for hydrogen, Z=1Z = 1; for oxygen, Z=8Z = 8.

  2. Calculate total electrons for I2\text{I}_2: 2×53=1062 \times 53 = 106.

  3. Calculate total electrons for H2O\text{H}_2\text{O}: 2(1)+8=102(1) + 8 = 10.

  4. Divide total electrons: 10610=10.6\frac{106}{10} = 10.6.

Final answer

Ratio of total electrons =10.6= 10.6

NEXT STEPS
Final Takeaways from Your Teacher
  • Review periodic table atomic numbers (ZZ) when assessing polarizability and London dispersion force trends.

  • Practice identifying when physical properties depend on total electron count versus valence configuration.

OverviewACEpath Teacher's Diagnosis

02 A student uses molar masses instead of electron counts to calculate the ratio, yielding 14.1.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ratio=253.818.02=14.1\text{Ratio} = \frac{253.8}{18.02} = 14.1

    Correct

    Ratio=Ne−(IX2)Ne−(HX2O)=2(53)2(1)+8=10610=10.6\text{Ratio} = \frac{N_{e^-}(\ce{I2})}{N_{e^-}(\ce{H2O})} = \frac{2(53)}{2(1) + 8} = \frac{106}{10} = 10.6

    You divided the molecular molar masses (253.8 g/mol253.8\text{ g/mol} and 18.02 g/mol18.02\text{ g/mol}) instead of counting the total electrons in each molecule. A neutral IX2\ce{I2} molecule has 2×53=1062 \times 53 = 106 electrons and a neutral HX2O\ce{H2O} molecule has 2(1)+8=102(1) + 8 = 10 electrons.

  2. Step 2

    Polarizability dominates when the electron cloud is sufficiently large and diffuse that instantaneous induced dipoles collectively outweigh permanent dipole attractions.

WHAT YOU DID WELL
Compliments from Your Teacher

You clearly explained how large, diffuse electron clouds generate strong cumulative dispersion attractions that can overcome dipole interactions.

You correctly set up a numerical ratio comparing the two molecular species.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
molar mass used instead of electron count

You substituted the provided molar masses into the ratio formula instead of determining the total electron counts from atomic numbers.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing molecular mass with electron count when quantifying polarizability factors.

REASONING PATH
Your ACEpath teacher’s suggested approach
Electron Count vs. Molar Mass
  • Polarizability directly correlates with the total number of electrons (ZtotalZ_\text{total}) and volume of the electron cloud, not directly with mass in grams per mole.

  • Always sum the atomic numbers (ZZ) of all constituent atoms in the molecular formula to determine total electron count.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the total electrons in IX2\ce{I2}: 2×53=106 electrons2 \times 53 = 106\text{ electrons}.

  2. Find the total electrons in HX2O\ce{H2O}: 2(1)+8=10 electrons2(1) + 8 = 10\text{ electrons}.

  3. Compute the ratio: 10610=10.6\frac{106}{10} = 10.6.

Final answer

Ratio of electrons =10.6= 10.6; polarizability dominates when a large, diffuse electron cloud creates cumulative London dispersion forces that surpass permanent dipole-dipole/hydrogen-bonding interactions.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice calculating total molecular electrons directly from the periodic table atomic numbers before computing comparison ratios.

  • Remember that while molar mass often scales alongside electron count, London dispersion forces fundamentally depend on electron distribution and polarizability.

OverviewACEpath Teacher's Diagnosis

03 A student misidentifies the boundary condition by claiming that dispersion forces can only dominate at extremely high pressures or low temperatures, ignoring electron cloud size and polarizability.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Electrons in IX2=2×53=106  ⟹  Electrons in HX2O=2(1)+8=10  ⟹  Ratio=10610=10.6\text{Electrons in } \ce{I2} = 2 \times 53 = 106 \implies \text{Electrons in } \ce{H2O} = 2(1) + 8 = 10 \implies \text{Ratio} = \frac{106}{10} = 10.6

  2. Step 2

    Dispersion forces dominate only under extreme external conditions of very high pressure and near-absolute-zero temperature that force molecules together.

    Correct

    The threshold is an intrinsic molecular property: when an electron cloud becomes sufficiently large and diffuse (high polarizability, here 106 e−106\,e^- vs. 10 e−10\,e^-), cumulative instantaneous dispersion attractions exceed network hydrogen bonding at ambient conditions (25.0∘C25.0^\circ\text{C}, 1.00 atm1.00\text{ atm}), resulting in a higher melting point (113.7∘C>0.0∘C113.7^\circ\text{C} > 0.0^\circ\text{C}).

    You attributed the dominance of dispersion forces to extreme external thermodynamic conditions rather than intrinsic molecular properties. As shown by the melting points at standard pressure, nonpolar IX2\ce{I2} is already a solid at room temperature because its large, polarizable electron cloud creates cumulative London dispersion forces that outweigh the hydrogen bonding in HX2O\ce{H2O}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly found the atomic numbers and computed the total electron count for diatomic iodine and water.

You accurately calculated the ratio of electrons between IX2\ce{I2} and HX2O\ce{H2O} as 10.610.6.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
misconception about intermolecular force scaling vs external conditions

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that London dispersion forces are inherently weak forces that can only dominate under extreme external conditions (such as near absolute zero or intense pressure), overlooking that dispersion forces scale extensively with electron cloud size and polarizability.

REASONING PATH
Your ACEpath teacher’s suggested approach
Intrinsic Scaling of Dispersion Forces
  • London dispersion force strength scales with polarizability, which increases with the number of electrons and the diffuse volume of the electron cloud.

  • Compare the size and polarizability of the electron clouds rather than invoking external thermodynamic extremes.

Comparing Disparate Intermolecular Forces
  • While hydrogen bonds are stronger on a per-contact basis between similarly sized molecules, cumulative dispersion forces in large molecules can surpass hydrogen bonding in small molecules at identical standard conditions.

  • Use macroscopic phase and melting point data at standard conditions (1 atm1\text{ atm}, 25∘C25^\circ\text{C}) to verify which intermolecular force dominates.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the intrinsic molecular factor that governs dispersion force magnitude: electron cloud size and polarizability.

  2. Compare the 106106 electrons of IX2\ce{I2} in diffuse n=5n=5 valence shells to the compact 1010 electrons of HX2O\ce{H2O}.

  3. State the boundary condition: when molecular polarizability is high enough, cumulative instantaneous dipole attractions overcome permanent hydrogen-bonding networks at standard ambient conditions (25.0∘C25.0^\circ\text{C}, 1.00 atm1.00\text{ atm}), as evidenced by the higher melting point of solid IX2\ce{I2} (113.7∘C113.7^\circ\text{C}) compared to liquid HX2O\ce{H2O} (0.0∘C0.0^\circ\text{C}).

Final answer

Ratio of electrons: 10610=10.6\frac{106}{10} = 10.6. The physical boundary condition occurs when a nonpolar molecule has a sufficiently large, polarizable electron cloud (over ten times more electrons than small polar molecules) such that cumulative London dispersion attractions exceed localized hydrogen bonds, allowing IX2\ce{I2} to exist as a solid with a higher melting point (113.7∘C113.7^\circ\text{C}) than liquid HX2O\ce{H2O} at standard conditions.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how polarizability depends on atomic radius and total electron count.

  • Practice comparing the boiling and melting points of large nonpolar molecules against small hydrogen-bonding molecules.

Lock it in

Similar question

01

Calculate the ratio of total electrons in liquid bromine (BrX2\ce{Br2}, Z=35Z = 35) to hydrogen fluoride gas (HF\ce{HF}, ZH=1,ZF=9Z_{\ce{H}} = 1, Z_{\ce{F}} = 9).

Answer

Ratio =7.0= 7.0. Total electrons in BrX2=2×35=70\ce{Br2} = 2 \times 35 = 70. Total electrons in HF=1+9=10\ce{HF} = 1 + 9 = 10. The ratio is 7010=7.0\frac{70}{10} = 7.0.

02

Both methane (CHX4\ce{CH4}) and carbon tetrachloride (CClX4\ce{CCl4}) are nonpolar tetrahedral molecules. Using total electron counts (ZC=6,ZH=1,ZCl=17Z_{\ce{C}} = 6, Z_{\ce{H}} = 1, Z_{\ce{Cl}} = 17), explain why CHX4\ce{CH4} is a gas at room temperature while CClX4\ce{CCl4} is a liquid.

Answer

CClX4\ce{CCl4} has 7474 total electrons (6+4×176 + 4 \times 17) compared to only 1010 in CHX4\ce{CH4} (6+4×16 + 4 \times 1). The much larger electron cloud of CClX4\ce{CCl4} creates significantly greater polarizability and stronger cumulative London dispersion forces, keeping it liquid at room temperature.

03

Compare nonpolar decane (CX10HX22\ce{C10H22}, molar mass 142.3 g/mol142.3\text{ g/mol}, boiling point 174∘C174^\circ\text{C}) and polar ethanol (CX2HX5OH\ce{C2H5OH}, molar mass 46.07 g/mol46.07\text{ g/mol}, boiling point 78∘C78^\circ\text{C}). Calculate the total electron count for each molecule and explain why decane has a substantially higher boiling point despite ethanol having hydrogen bonding.

Answer

Decane has 8282 electrons (10×6+22×110 \times 6 + 22 \times 1), whereas ethanol has 2626 electrons (2×6+6×1+82 \times 6 + 6 \times 1 + 8). The extensive surface area and high polarizability of decane's 8282-electron chain produce cumulative London dispersion attractions that outweigh the localized hydrogen bonding network in ethanol.

Loading workspace…