Resources

A trace leak chamber operates at ultra-high vacuum with a residual base pressure of Pbase=1.00×10−7 torrP_{\text{base}} = 1.00 \times 10^{-7}\text{ torr}. Pure helium gas is admitted into the chamber at a constant leak rate, raising the chamber pressure until the helium partial pressure reaches PHe=4.00×10−6 torrP_{\text{He}} = 4.00 \times 10^{-6}\text{ torr}. (a) Calculate the total pressure in the chamber, PtotalP_{\text{total}}, under this steady-state leakage. (b) Find the ratio of the number of helium molecules to residual gas molecules (NHe/NresN_{\text{He}}/N_{\text{res}}). (c) In the asymptotic limit where the chamber is evacuated to PHe→0P_{\text{He}} \to 0, identify the limiting value of PtotalP_{\text{total}}.

Answer and steps

Final answer

(a) Ptotal=4.10×10−6 torrP_{\text{total}} = 4.10 \times 10^{-6}\text{ torr}; (b) NHeNres=40.0\frac{N_{\text{He}}}{N_{\text{res}}} = 40.0; (c) lim⁡PHe→0Ptotal=Pbase=1.00×10−7 torr\lim_{P_{\text{He}} \to 0} P_{\text{total}} = P_{\text{base}} = 1.00 \times 10^{-7}\text{ torr}

Steps

Part (a): Calculate the Total Chamber Pressure (PtotalP_{\text{total}})

1. Apply Dalton's Law of Partial Pressures
Dalton's law states that the total pressure exerted by a mixture of non-reacting gases inside a container is equal to the sum of the individual partial pressures of each component: Ptotal=∑Pi=Pbase+PHeP_{\text{total}} = \sum P_i = P_{\text{base}} + P_{\text{He}}

2. Convert to Consistent Scientific Notation and Add
Express both pressures with the same exponent so they can be summed directly:

  • Pbase=1.00×10−7 torr=0.10×10−6 torrP_{\text{base}} = 1.00 \times 10^{-7}\text{ torr} = 0.10 \times 10^{-6}\text{ torr}
  • PHe=4.00×10−6 torrP_{\text{He}} = 4.00 \times 10^{-6}\text{ torr}

Substitute these values into the total pressure formula: Ptotal=0.10×10−6 torr+4.00×10−6 torr=4.10×10−6 torrP_{\text{total}} = 0.10 \times 10^{-6}\text{ torr} + 4.00 \times 10^{-6}\text{ torr} = 4.10 \times 10^{-6}\text{ torr}


Part (b): Determine the Ratio of Molecules (NHe/NresN_{\text{He}}/N_{\text{res}})

1. Relate Pressure to Particle Count via the Ideal Gas Law
For each gas component occupying the same volume VV at thermal equilibrium temperature TT, the ideal gas equation in molecular form is: PiV=NikBT  ⟹  Ni=PiVkBTP_i V = N_i k_{\text{B}} T \implies N_i = \frac{P_i V}{k_{\text{B}} T} where NiN_i is the number of molecules and kBk_{\text{B}} is the Boltzmann constant.

2. Compute the Ratio
Because the chamber volume VV and temperature TT are identical for both helium and the residual gases, the ratio of the number of molecules simplifies directly to the ratio of their partial pressures: NHeNres=PHePbase\frac{N_{\text{He}}}{N_{\text{res}}} = \frac{P_{\text{He}}}{P_{\text{base}}}

Substitute the given pressures: NHeNres=4.00×10−6 torr1.00×10−7 torr=40.0×10−7 torr1.00×10−7 torr=40.0\frac{N_{\text{He}}}{N_{\text{res}}} = \frac{4.00 \times 10^{-6}\text{ torr}}{1.00 \times 10^{-7}\text{ torr}} = \frac{40.0 \times 10^{-7}\text{ torr}}{1.00 \times 10^{-7}\text{ torr}} = 40.0


Part (c): Determine the Limiting Value of PtotalP_{\text{total}} as PHe→0P_{\text{He}} \to 0

1. Evaluate the Limit
Taking the mathematical limit of the total pressure expression as the helium leak is completely closed or pumped away (PHe→0P_{\text{He}} \to 0): lim⁡PHe→0Ptotal=lim⁡PHe→0(Pbase+PHe)=Pbase+0=Pbase\lim_{P_{\text{He}} \to 0} P_{\text{total}} = \lim_{P_{\text{He}} \to 0} (P_{\text{base}} + P_{\text{He}}) = P_{\text{base}} + 0 = P_{\text{base}}

2. Conclude the Asymptotic Pressure
lim⁡PHe→0Ptotal=1.00×10−7 torr\lim_{P_{\text{He}} \to 0} P_{\text{total}} = 1.00 \times 10^{-7}\text{ torr}

Common Pitfall: Do not assume Ptotal→0P_{\text{total}} \to 0 in high-vacuum systems; real vacuum chambers always have an irreducible baseline pressure caused by outgassing and background residual gas.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student adds scientific notation coefficients directly without aligning exponents, calculating 1.00 + 4.00 = 5.00 × 10⁻⁶ torr for the total pressure.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ptotal=Pbase+PHe  ⟹  Ptotal=1.00×10−7+4.00×10−6=5.00×10−6 torrP_{\text{total}} = P_{\text{base}} + P_{\text{He}} \implies P_{\text{total}} = 1.00 \times 10^{-7} + 4.00 \times 10^{-6} = 5.00 \times 10^{-6}\text{ torr}

    Correct

    Ptotal=Pbase+PHe=0.10×10−6 torr+4.00×10−6 torr=4.10×10−6 torrP_{\text{total}} = P_{\text{base}} + P_{\text{He}} = 0.10 \times 10^{-6}\text{ torr} + 4.00 \times 10^{-6}\text{ torr} = 4.10 \times 10^{-6}\text{ torr}

    You correctly stated Dalton's law, but you added the coefficients 1.001.00 and 4.004.00 directly while keeping the exponent 10−610^{-6}. Because the terms have different exponents (−7-7 vs. −6-6), you must first convert them to a common base exponent: 1.00×10−7 torr=0.10×10−6 torr1.00 \times 10^{-7}\text{ torr} = 0.10 \times 10^{-6}\text{ torr}, giving Ptotal=0.10×10−6+4.00×10−6=4.10×10−6 torrP_{\text{total}} = 0.10 \times 10^{-6} + 4.00 \times 10^{-6} = 4.10 \times 10^{-6}\text{ torr}.

  2. Step 2

    NHeNres=PHePbase  ⟹  NHeNres=4.00×10−61.00×10−7=40.0\frac{N_{\text{He}}}{N_{\text{res}}} = \frac{P_{\text{He}}}{P_{\text{base}}} \implies \frac{N_{\text{He}}}{N_{\text{res}}} = \frac{4.00 \times 10^{-6}}{1.00 \times 10^{-7}} = 40.0

  3. Step 3

    As PHe→0, Ptotal→Pbase=1.00×10−7 torr\text{As } P_{\text{He}} \to 0,\ P_{\text{total}} \to P_{\text{base}} = 1.00 \times 10^{-7}\text{ torr}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied Dalton's law of partial pressures to formulate the sum in part (a).

You recognized that particle count is directly proportional to partial pressure under identical volume and temperature conditions in part (b).

You correctly identified the physical significance of the non-zero residual base pressure as the lower bound in part (c).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Scientific notation addition with unaligned exponents

In part (a), you wrote 1.00+4.00=5.001.00 + 4.00 = 5.00 without adjusting for the difference between 10−710^{-7} and 10−610^{-6}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Adding numbers in scientific notation requires converting all terms to the same power of ten before adding their coefficients. Directly adding coefficients when exponents differ neglects the order-of-magnitude difference between the components.

REASONING PATH
Your ACEpath teacher’s suggested approach
Align Exponents Before Adding or Subtracting
  • To evaluate (a×10m)+(b×10n)(a \times 10^m) + (b \times 10^n), first rewrite one term so both share the same exponent: a×10m=(a⋅10m−n)×10na \times 10^m = (a \cdot 10^{m-n}) \times 10^n.

  • Convert 1.00×10−71.00 \times 10^{-7} to 0.10×10−60.10 \times 10^{-6} before adding it to 4.00×10−64.00 \times 10^{-6}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Rewrite 1.00×10−7 torr1.00 \times 10^{-7}\text{ torr} with an exponent of 10−610^{-6}: 1.00×10−7 torr=0.100×10−6 torr1.00 \times 10^{-7}\text{ torr} = 0.100 \times 10^{-6}\text{ torr}.

  2. Sum the coefficients over the common power of ten: (0.100+4.00)×10−6 torr=4.10×10−6 torr(0.100 + 4.00) \times 10^{-6}\text{ torr} = 4.10 \times 10^{-6}\text{ torr}.

Final answer

(a) Ptotal=4.10×10−6 torrP_{\text{total}} = 4.10 \times 10^{-6}\text{ torr}; (b) NHeNres=40.0\frac{N_{\text{He}}}{N_{\text{res}}} = 40.0; (c) lim⁡PHe→0Ptotal=1.00×10−7 torr\lim_{P_{\text{He}} \to 0} P_{\text{total}} = 1.00 \times 10^{-7}\text{ torr}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always check whether exponents match before adding or subtracting values expressed in scientific notation.

  • Practice rewriting scientific notation values into matching powers of ten as your immediate first step when finding sums.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the ratio of helium molecules to residual gas molecules by dividing the base pressure by the helium pressure, yielding 0.025.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ptotal=Pbase+PHe=1.00×10−7 torr+4.00×10−6 torr  ⟹  Ptotal=4.10×10−6 torrP_{\text{total}} = P_{\text{base}} + P_{\text{He}} = 1.00 \times 10^{-7}\text{ torr} + 4.00 \times 10^{-6}\text{ torr} \implies P_{\text{total}} = 4.10 \times 10^{-6}\text{ torr}

  2. Step 2

    NHeNres=PbasePHe=1.00×10−74.00×10−6=0.025\frac{N_{\text{He}}}{N_{\text{res}}} = \frac{P_{\text{base}}}{P_{\text{He}}} = \frac{1.00 \times 10^{-7}}{4.00 \times 10^{-6}} = 0.025

    Correct

    NHeNres=PHePbase=4.00×10−6 torr1.00×10−7 torr=40.0\frac{N_{\text{He}}}{N_{\text{res}}} = \frac{P_{\text{He}}}{P_{\text{base}}} = \frac{4.00 \times 10^{-6}\text{ torr}}{1.00 \times 10^{-7}\text{ torr}} = 40.0

    Because particle count is directly proportional to partial pressure at constant volume and temperature (Ni∝PiN_i \propto P_i), the ratio NHeNres\frac{N_{\text{He}}}{N_{\text{res}}} must equal PHePbase\frac{P_{\text{He}}}{P_{\text{base}}}. You placed PbaseP_{\text{base}} in the numerator and PHeP_{\text{He}} in the denominator, resulting in the reciprocal ratio.

  3. Step 3

    As PHe→0,  Ptotal→Pbase=1.00×10−7 torr\text{As } P_{\text{He}} \to 0,\; P_{\text{total}} \to P_{\text{base}} = 1.00 \times 10^{-7}\text{ torr}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used Dalton's law of partial pressures to sum the base and helium pressures.

You aligned the powers of ten properly when computing the total pressure in scientific notation.

You accurately identified the irreducible base pressure as the limiting value when the helium leak approaches zero.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted mole ratio

You accidentally placed the base pressure in the numerator instead of the helium pressure.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Direct proportionality between particle count (NN) and partial pressure (PP) was not mapped strictly to corresponding numerator and denominator terms, leading to an inverted ratio.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Corresponding Quantities in Ratios
  • For an ideal gas mixture in a shared volume at constant temperature, Ni=PiVkBTN_i = \frac{P_i V}{k_{\text{B}} T}, so NANB=PAPB\frac{N_A}{N_B} = \frac{P_A}{P_B}.

  • Always write the proportional relation explicitly and check that the species in the numerator on the left matches the species in the numerator on the right before plugging in numbers.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute the partial pressures: NHeNres=4.00×10−6 torr1.00×10−7 torr\frac{N_{\text{He}}}{N_{\text{res}}} = \frac{4.00 \times 10^{-6}\text{ torr}}{1.00 \times 10^{-7}\text{ torr}}.

  2. Simplify the fraction: 4.00×10−60.10×10−6=40.0\frac{4.00 \times 10^{-6}}{0.10 \times 10^{-6}} = 40.0.

Final answer

(a) Ptotal=4.10×10−6 torrP_{\text{total}} = 4.10 \times 10^{-6}\text{ torr}; (b) NHeNres=40.0\frac{N_{\text{He}}}{N_{\text{res}}} = 40.0; (c) lim⁡PHe→0Ptotal=1.00×10−7 torr\lim_{P_{\text{He}} \to 0} P_{\text{total}} = 1.00 \times 10^{-7}\text{ torr}

NEXT STEPS
Final Takeaways from Your Teacher
  • Perform a sanity check on ratios: since PHe>PbaseP_{\text{He}} > P_{\text{base}}, helium molecules must outnumber residual gas molecules, so the ratio NHe/NresN_{\text{He}}/N_{\text{res}} must be greater than 11.

  • Practice matching indices across proportional gas variables before substituting numerical values.

OverviewACEpath Teacher's Diagnosis

03 The student assumes that total pressure approaches zero when the admitted gas is evacuated, ignoring the non-zero residual base pressure.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ptotal=Pbase+PHe=1.00×10−7 torr+4.00×10−6 torr  ⟹  Ptotal=4.10×10−6 torrP_{\text{total}} = P_{\text{base}} + P_{\text{He}} = 1.00 \times 10^{-7}\text{ torr} + 4.00 \times 10^{-6}\text{ torr} \implies P_{\text{total}} = 4.10 \times 10^{-6}\text{ torr}

  2. Step 2

    NHeNres=PHePbase=4.00×10−61.00×10−7  ⟹  NHeNres=40.0\frac{N_{\text{He}}}{N_{\text{res}}} = \frac{P_{\text{He}}}{P_{\text{base}}} = \frac{4.00 \times 10^{-6}}{1.00 \times 10^{-7}} \implies \frac{N_{\text{He}}}{N_{\text{res}}} = 40.0

  3. Step 3

    As PHe→0, Ptotal→0 torr\text{As } P_{\text{He}} \to 0,\ P_{\text{total}} \to 0\text{ torr}

    Correct

    lim⁡PHe→0Ptotal=Pbase+0=1.00×10−7 torr\lim_{P_{\text{He}} \to 0} P_{\text{total}} = P_{\text{base}} + 0 = 1.00 \times 10^{-7}\text{ torr}

    When the helium leak is eliminated (PHe→0P_{\text{He}} \to 0), the residual background gases remain in the chamber, so the total pressure asymptotically approaches PbaseP_{\text{base}}, not zero.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used Dalton's law of partial pressures to sum the gas components in part (a).

You accurately related particle count ratios to partial pressure ratios using the ideal gas law in part (b).

You performed all scientific notation arithmetic and unit conversions without error.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Ignoring Residual Base Pressure in Limiting Case

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the total pressure as being dependent solely on the introduced gas, forgetting that Dalton's law includes an irreducible background baseline pressure (PbaseP_{\text{base}}) present in vacuum systems.

REASONING PATH
Your ACEpath teacher’s suggested approach
Vacuum Baseline Asymptote
  • In a real vacuum chamber with a non-zero background pressure, the total pressure is Ptotal(t)=Pbase+Padmitted(t)P_{\text{total}}(t) = P_{\text{base}} + P_{\text{admitted}}(t). As Padmitted→0P_{\text{admitted}} \to 0, Ptotal→PbaseP_{\text{total}} \to P_{\text{base}}.

  • Always write out the complete sum from Dalton's law before evaluating a limit, rather than setting the total pressure to zero when one component disappears.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the full Dalton's law expression for total pressure: Ptotal=Pbase+PHeP_{\text{total}} = P_{\text{base}} + P_{\text{He}}.

  2. Evaluate the limit as PHe→0P_{\text{He}} \to 0: lim⁡PHe→0Ptotal=Pbase+0=Pbase\lim_{P_{\text{He}} \to 0} P_{\text{total}} = P_{\text{base}} + 0 = P_{\text{base}}.

  3. Substitute the given base pressure: Ptotal→1.00×10−7 torrP_{\text{total}} \to 1.00 \times 10^{-7}\text{ torr}.

Final answer

(a) Ptotal=4.10×10−6 torrP_{\text{total}} = 4.10 \times 10^{-6}\text{ torr}; (b) NHeNres=40.0\frac{N_{\text{He}}}{N_{\text{res}}} = 40.0; (c) lim⁡PHe→0Ptotal=1.00×10−7 torr\lim_{P_{\text{He}} \to 0} P_{\text{total}} = 1.00 \times 10^{-7}\text{ torr}

NEXT STEPS
Final Takeaways from Your Teacher
  • When analyzing asymptotic limits of mixtures, substitute the limiting value into the complete Dalton's law summation instead of assuming the system empties to absolute vacuum.

  • Review how real-world vacuum chambers maintain an ultimate base pressure due to wall outgassing and pump equilibrium.

Lock it in

Similar question

01

A gas cylinder contains neon at a partial pressure of PNe=2.50×10−3 atmP_{\text{Ne}} = 2.50 \times 10^{-3}\text{ atm} and argon at PAr=1.20×10−2 atmP_{\text{Ar}} = 1.20 \times 10^{-2}\text{ atm}. Calculate the total pressure PtotalP_{\text{total}} in the cylinder.

Answer

Ptotal=1.45×10−2 atmP_{\text{total}} = 1.45 \times 10^{-2}\text{ atm}. Key steps: Convert PNe=0.250×10−2 atmP_{\text{Ne}} = 0.250 \times 10^{-2}\text{ atm}, then add: Ptotal=(0.250+1.20)×10−2 atm=1.45×10−2 atmP_{\text{total}} = (0.250 + 1.20) \times 10^{-2}\text{ atm} = 1.45 \times 10^{-2}\text{ atm}.

02

In a semiconductor chamber, three trace gases exert partial pressures: P1=3.00×10−8 torrP_1 = 3.00 \times 10^{-8}\text{ torr}, P2=2.00×10−7 torrP_2 = 2.00 \times 10^{-7}\text{ torr}, and P3=1.50×10−6 torrP_3 = 1.50 \times 10^{-6}\text{ torr}. Find the total pressure PtotalP_{\text{total}} in standard scientific notation.

Answer

Ptotal=1.73×10−6 torrP_{\text{total}} = 1.73 \times 10^{-6}\text{ torr}. Key steps: Convert all pressures to the common exponent 10−6 torr10^{-6}\text{ torr}: P1=0.030×10−6 torrP_1 = 0.030 \times 10^{-6}\text{ torr}, P2=0.200×10−6 torrP_2 = 0.200 \times 10^{-6}\text{ torr}, and P3=1.50×10−6 torrP_3 = 1.50 \times 10^{-6}\text{ torr}. Summing yields (0.030+0.200+1.50)×10−6=1.73×10−6 torr(0.030 + 0.200 + 1.50) \times 10^{-6} = 1.73 \times 10^{-6}\text{ torr}.

03

A rigid 5.00 L5.00\text{ L} vessel contains N1=6.02×1016N_1 = 6.02 \times 10^{16} molecules of nitrogen gas and N2=1.20×1018N_2 = 1.20 \times 10^{18} molecules of helium gas at 300 K300\text{ K}. (a) Calculate the mole ratio nHe/nN2n_{\text{He}}/n_{\text{N}_2}. (b) If PN2=5.00×10−4 atmP_{\text{N}_2} = 5.00 \times 10^{-4}\text{ atm}, calculate the total pressure PtotalP_{\text{total}} in the vessel.

Answer

(a) nHe/nN2=19.9n_{\text{He}}/n_{\text{N}_2} = 19.9; (b) Ptotal=1.05×10−2 atmP_{\text{total}} = 1.05 \times 10^{-2}\text{ atm}. Key steps: (a) N2/N1=(1.20×1018)/(6.02×1016)≈19.93N_2/N_1 = (1.20 \times 10^{18})/(6.02 \times 10^{16}) \approx 19.93. (b) Since Pi∝NiP_i \propto N_i, PHe=19.93×PN2=19.93×(5.00×10−4 atm)=9.97×10−3 atm=0.997×10−2 atmP_{\text{He}} = 19.93 \times P_{\text{N}_2} = 19.93 \times (5.00 \times 10^{-4}\text{ atm}) = 9.97 \times 10^{-3}\text{ atm} = 0.997 \times 10^{-2}\text{ atm}. PN2=0.050×10−2 atmP_{\text{N}_2} = 0.050 \times 10^{-2}\text{ atm}. Total pressure Ptotal=0.050×10−2+0.997×10−2=1.05×10−2 atmP_{\text{total}} = 0.050 \times 10^{-2} + 0.997 \times 10^{-2} = 1.05 \times 10^{-2}\text{ atm}.

Loading workspace…