Resources

A polymer sample of poly(vinyl chloride), PVC, is prepared by free-radical addition polymerization of vinyl chloride monomer (CH2=CHCl\text{CH}_2=\text{CHCl}, molar mass M0=62.50 g/molM_0 = 62.50\text{ g/mol}). If the measured number-average molar mass (Mˉn\bar{M}_n) of the resulting PVC sample is 1.25×105 g/mol1.25 \times 10^5\text{ g/mol}, calculate the number-average degree of polymerization (Xˉn\bar{X}_n) and state whether the polymerization proceeds with the loss of small byproduct molecules.

Answer and steps

Final answer

Xˉn=2.00×103\bar{X}_n = 2.00 \times 10^3; No byproduct molecules are eliminated because PVC forms via addition (chain-growth) polymerization.

Steps

01

Calculate the Degree of Polymerization (Xˉn\bar{X}_n)

The number-average degree of polymerization, Xˉn\bar{X}_n, represents the average number of repeating monomer units in a polymer chain. It is related to the number-average molar mass of the polymer (Mˉn\bar{M}_n) and the molar mass of the repeating monomer unit (M0M_0) by the formula:

Xˉn=MˉnM0\bar{X}_n = \frac{\bar{M}_n}{M_0}

Given:

  • Number-average molar mass, Mˉn=1.25×105 g/mol\bar{M}_n = 1.25 \times 10^5\text{ g/mol}
  • Molar mass of the monomer unit, M0=62.50 g/molM_0 = 62.50\text{ g/mol}

Substitute the given values into the equation:

Xˉn=1.25×105 g/mol62.50 g/mol=2.00×103\bar{X}_n = \frac{1.25 \times 10^5\text{ g/mol}}{62.50\text{ g/mol}} = 2.00 \times 10^3

Thus, each polymer chain contains an average of 2.00×1032.00 \times 10^3 vinyl chloride units.


02

Determine Whether Small Byproducts Are Eliminated

Polymerization reactions are broadly categorized based on their reaction mechanism:

  • Addition (chain-growth) polymerization: Monomers with multiple bonds (such as the C=C\text{C}=\text{C} double bond in vinyl chloride, CHX2=CHCl\ce{CH2=CHCl}) join together by breaking the π\pi-bond to form new single covalent σ\sigma-bonds linking the chain. Because all atoms present in the monomer molecules are incorporated directly into the polymer chain, no small byproduct molecules are eliminated.
  • Condensation (step-growth) polymerization: Bifunctional or polyfunctional monomers react with the elimination of small byproduct molecules such as HX2O\ce{H2O}, HCl\ce{HCl}, or CHX3OH\ce{CH3OH}.

Because PVC is formed via addition polymerization, no small molecules are lost during the reaction.


Common Pitfall

Do not confuse the molar mass of the repeat unit in addition polymers with that in condensation polymers. In addition polymers like PVC, the formula and molar mass of the repeat unit are identical to those of the starting monomer (M0M_0). In condensation polymers, the molar mass of the repeat unit is less than the sum of the monomers due to the loss of small byproduct molecules.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the molar mass of the polymer with the monomer mass and inverts the ratio, calculating M0 / M̄n instead of M̄n / M0.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Xˉn=M0Mˉn  ⟹  Xˉn=62.501.25×105  ⟹  Xˉn=5.0×10−4\bar{X}_n = \frac{M_0}{\bar{M}_n} \implies \bar{X}_n = \frac{62.50}{1.25 \times 10^5} \implies \bar{X}_n = 5.0 \times 10^{-4}

    Correct

    Xˉn=MˉnM0=1.25×105 g/mol62.50 g/mol=2.00×103\bar{X}_n = \frac{\bar{M}_n}{M_0} = \frac{1.25 \times 10^5\text{ g/mol}}{62.50\text{ g/mol}} = 2.00 \times 10^3

    The number-average degree of polymerization Xˉn\bar{X}_n represents the number of monomer units joined to make the polymer chain, so the total molar mass Mˉn\bar{M}_n must be divided by the repeat-unit molar mass M0M_0.

  2. Step 2

    No, addition polymerization does not eliminate small molecules.\text{No, addition polymerization does not eliminate small molecules.}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that addition polymerization involves chain-growth without eliminating small byproduct molecules.

You correctly identified the given numerical values for the monomer molar mass and the polymer molar mass.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted degree of polymerization ratio

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You inverted the definition of the degree of polymerization, setting it up as monomer mass over polymer mass instead of total chain mass over monomer unit mass.

REASONING PATH
Your ACEpath teacher’s suggested approach
Physical meaning of $\bar{X}_n$
  • Xˉn\bar{X}_n counts how many repeat units exist in an average chain; for any realistic polymer, Xˉn≫1\bar{X}_n \gg 1.

  • Always divide the large polymer molar mass Mˉn\bar{M}_n by the smaller repeat unit mass M0M_0: Xˉn=MˉnM0\bar{X}_n = \frac{\bar{M}_n}{M_0}.

Sanity check on magnitude
  • A degree of polymerization represents a count of connected units and cannot be a tiny fraction like 10−410^{-4}.

  • If your calculated Xˉn<1\bar{X}_n < 1, check immediately whether you accidentally placed the monomer mass in the numerator.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the definition of the number-average degree of polymerization: Xˉn=MˉnM0\bar{X}_n = \frac{\bar{M}_n}{M_0}.

  2. Substitute the given values: Xˉn=1.25×105 g/mol62.50 g/mol\bar{X}_n = \frac{1.25 \times 10^5\text{ g/mol}}{62.50\text{ g/mol}}.

  3. Compute the quotient: Xˉn=2.00×103\bar{X}_n = 2.00 \times 10^3.

Final answer

Xˉn=2.00×103\bar{X}_n = 2.00 \times 10^3; No byproduct molecules are eliminated.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the conceptual definition of degree of polymerization as chain length (N=Total Mass/Unit MassN = \text{Total Mass} / \text{Unit Mass}).

  • Perform a quick magnitude sanity check whenever calculating Xˉn\bar{X}_n to ensure the result is a large integer or order of magnitude (10210^2 to 10510^5).

OverviewACEpath Teacher's Diagnosis

02 The student confuses addition polymerization with condensation (step-growth) polymerization and incorrectly concludes that small byproduct molecules such as HCl or water are released.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Xˉn=MˉnM0  ⟹  Xˉn=1.25×10562.50  ⟹  Xˉn=2000\bar{X}_n = \frac{\bar{M}_n}{M_0} \implies \bar{X}_n = \frac{1.25 \times 10^5}{62.50} \implies \bar{X}_n = 2000

  2. Step 2

    Yes, small molecules such as HCl\ce{HCl} are eliminated during the polymerization.

    Correct

    No small byproduct molecules are eliminated because PVC is formed via addition (chain-growth) polymerization.

    You confused addition polymerization with condensation (step-growth) polymerization. In addition polymerization of alkene monomers, the π\pi-bonds open to link the monomer units directly together, meaning no atoms are lost and no small molecule byproduct is formed.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled the formula relating degree of polymerization to number-average molar mass and monomer molar mass.

You accurately calculated Xˉn=2000\bar{X}_n = 2000 from the given values.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Addition vs. Condensation Polymerization Confusion

No calculation slip occurred; the numerical calculation was executed correctly.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused addition (chain-growth) polymerization with condensation (step-growth) polymerization, assuming that the presence of chlorine in the monomer implies the release of HCl\ce{HCl}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Polymerization Mechanism
  • Addition polymerization of C=C\ce{C=C} monomers involves breaking π\pi-bonds without loss of atoms, while condensation polymerization joins functional groups with loss of small molecules (such as HX2O\ce{H2O} or HCl\ce{HCl}).

  • Check whether the monomer has a reactive double bond that adds together without losing atoms, or complementary bifunctional groups that release a small byproduct.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the reaction mechanism: the question specifies free-radical addition polymerization across the C=C\ce{C=C} double bond of vinyl chloride.

  2. Recall that addition polymers retain 100%100\% of the monomer atoms in the polymer backbone and side groups.

  3. Conclude that no small molecules (such as HCl\ce{HCl}) are formed or eliminated during polymerization.

Final answer

Xˉn=2.00×103\bar{X}_n = 2.00 \times 10^3; No byproduct molecules are eliminated because PVC forms via addition polymerization.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the structural differences between addition polymers (e.g., polyethylene, PVC, polystyrene) and condensation polymers (e.g., nylon, PET).

  • Practice identifying whether a polymerization releases byproducts simply by looking at whether the monomer contains double bonds (addition) or functional groups like −COOH\ce{-COOH}, −OH\ce{-OH}, and −NHX2\ce{-NH2} (condensation).

Lock it in

Similar question

01

A sample of poly(methyl methacrylate) (PMMA) is synthesized via addition polymerization of methyl methacrylate (M0=100.12 g/molM_0 = 100.12\text{ g/mol}). If the measured Mˉn\bar{M}_n is 2.50×105 g/mol2.50 \times 10^5\text{ g/mol}, calculate its degree of polymerization Xˉn\bar{X}_n and state if any small molecules were eliminated.

Answer

Xˉn=MˉnM0=2.50×105 g/mol100.12 g/mol≈2.50×103\bar{X}_n = \frac{\bar{M}_n}{M_0} = \frac{2.50 \times 10^5\text{ g/mol}}{100.12\text{ g/mol}} \approx 2.50 \times 10^3. No small molecules are eliminated because PMMA forms via addition polymerization.

02

Polypropylene is formed by the chain-growth addition polymerization of propylene (C3H6\text{C}_3\text{H}_6, M0=42.08 g/molM_0 = 42.08\text{ g/mol}). A technician calculates Xˉn=3.50×10−4\bar{X}_n = 3.50 \times 10^{-4} for a sample with Mˉn=1.20×105 g/mol\bar{M}_n = 1.20 \times 10^5\text{ g/mol}. Identify the error, explain why the technician's answer is physically impossible, and find the correct Xˉn\bar{X}_n.

Answer

The technician inverted the ratio, computing M0Mˉn\frac{M_0}{\bar{M}_n} instead of MˉnM0\frac{\bar{M}_n}{M_0}. The degree of polymerization counts repeat units and must be ≫1\gg 1. The correct value is Xˉn=1.20×105 g/mol42.08 g/mol≈2.85×103\bar{X}_n = \frac{1.20 \times 10^5\text{ g/mol}}{42.08\text{ g/mol}} \approx 2.85 \times 10^3.

03

Nylon-6,6 is synthesized by condensation polymerization of adipic acid and hexamethylenediamine, eliminating one water molecule per peptide link formed. The effective molar mass of the repeat unit is M0=226.32 g/molM_0 = 226.32\text{ g/mol}. If a nylon sample has Xˉn=150\bar{X}_n = 150, calculate Mˉn\bar{M}_n (neglecting end groups) and contrast its byproduct formation with that of PVC.

Answer

Mˉn=Xˉn×M0=150×226.32 g/mol=3.39×104 g/mol\bar{M}_n = \bar{X}_n \times M_0 = 150 \times 226.32\text{ g/mol} = 3.39 \times 10^4\text{ g/mol}. Unlike PVC (an addition polymer with zero byproducts), Nylon-6,6 is a condensation polymer that eliminates water (H2O\text{H}_2\text{O}) during chain formation.

Loading workspace…