Resources

According to green engineering thresholds for commercial active pharmaceutical ingredients (APIs), a manufacturing route is deemed 'critical waste-intensive' if its cumulative Environmental Factor (E-factorE\text{-factor}) exceeds 25.0025.00. A pilot synthesis generates 8.50 kg8.50\text{ kg} of API per batch and produces an unavoidable solid waste of 42.50 kg42.50\text{ kg} of spent silica gel and inorganic salts. The liquid reaction medium consists of an ethyl acetate/water wash mixture. Determine the maximum allowable mass of total solvent and aqueous waste in kilograms that can be consumed per batch before this process crosses the threshold into the critical waste-intensive category (E-factor>25.00E\text{-factor} > 25.00).

Answer and steps

Final answer

Maximum allowable solvent/wash waste=170.00 kg\text{Maximum allowable solvent/wash waste} = 170.00\text{ kg}

Steps

01

Calculate the Maximum Allowable Total Waste

Understanding the Environmental Factor (E-factorE\text{-factor})

The Environmental Factor (E-factorE\text{-factor}) is a core metric in Green Chemistry defined by Roger Sheldon. It evaluates the mass efficiency of a chemical process by comparing the total mass of waste generated to the mass of the final desired product: E-factor=Total Mass of WasteMass of Desired ProductE\text{-factor} = \frac{\text{Total Mass of Waste}}{\text{Mass of Desired Product}} Here, waste includes all materials discarded during the process—such as unrecovered solvents, solid by-products, reagents, and aqueous washes—excluding only the isolated product itself.

To avoid being classified as "critical waste-intensive," the process must satisfy:

E-factor≤25.00E\text{-factor} \le 25.00

Given that each pilot batch produces 8.50 kg8.50\text{ kg} of the active pharmaceutical ingredient (API):

mtotal wastemAPI≤25.00\frac{m_{\text{total waste}}}{m_{\text{API}}} \le 25.00

mtotal waste, max=25.00⋅mAPIm_{\text{total waste, max}} = 25.00 \cdot m_{\text{API}}

Substitute mAPI=8.50 kgm_{\text{API}} = 8.50\text{ kg}:

mtotal waste, max=25.00⋅8.50 kg=212.50 kgm_{\text{total waste, max}} = 25.00 \cdot 8.50\text{ kg} = 212.50\text{ kg}


02

Determine the Maximum Allowable Solvent and Aqueous Waste

The total waste consists of the unavoidable solid waste (spent silica gel and inorganic salts) plus the liquid solvent and aqueous wash waste:

mtotal waste=msolid waste+msolvent/wash wastem_{\text{total waste}} = m_{\text{solid waste}} + m_{\text{solvent/wash waste}}

Rearranging for the solvent/wash waste:

msolvent/wash waste, max=mtotal waste, max−msolid wastem_{\text{solvent/wash waste, max}} = m_{\text{total waste, max}} - m_{\text{solid waste}}

Substitute the known values:

msolvent/wash waste, max=212.50 kg−42.50 kg=170.00 kgm_{\text{solvent/wash waste, max}} = 212.50\text{ kg} - 42.50\text{ kg} = 170.00\text{ kg}

Common Pitfall: Do not include the mass of the product (8.50 kg8.50\text{ kg}) in the numerator of the E-factorE\text{-factor}. Unlike process mass intensity (PMI), which uses total raw material inputs in the numerator (PMI=E-factor+1{\text{PMI}} = E\text{-factor} + 1), the E-factorE\text{-factor} considers solely discarded waste.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to subtract the unavoidable solid waste from the maximum total allowable waste, equating the total waste directly to the liquid waste limit.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    E-factor=total wastemass of product  ⟹  25.00=total waste8.50 kg  ⟹  total waste=25.00×8.50=212.50 kg\text{E-factor} = \frac{\text{total waste}}{\text{mass of product}} \implies 25.00 = \frac{\text{total waste}}{8.50\text{ kg}} \implies \text{total waste} = 25.00 \times 8.50 = 212.50\text{ kg}

  2. Step 2

    maximum allowable liquid waste=212.50 kg\text{maximum allowable liquid waste} = 212.50\text{ kg}

    Correct

    msolvent/wash waste, max=mtotal waste, max−msolid waste=212.50 kg−42.50 kg=170.00 kgm_{\text{solvent/wash waste, max}} = m_{\text{total waste, max}} - m_{\text{solid waste}} = 212.50\text{ kg} - 42.50\text{ kg} = 170.00\text{ kg}

    You omitted the unavoidable solid waste from your waste balance. Because total waste is the sum of solid waste and liquid waste, you need to subtract the 42.50 kg42.50\text{ kg} of solid waste from the total allowable budget of 212.50 kg212.50\text{ kg}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled and stated the definition of Sheldon's E-factorE\text{-factor}.

You accurately computed the total allowable waste mass of 212.50 kg212.50\text{ kg} using the API batch mass.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of co-generated waste stream

You equated the total allowable waste directly to the liquid waste instead of accounting for the solid waste stream.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the overall mass budget defined by a green chemistry metric (mtotal wastem_{\text{total waste}}) with a single component stream (msolvent/washm_{\text{solvent/wash}}), overlooking the mass balance mtotal waste=msolid+mliquidm_{\text{total waste}} = m_{\text{solid}} + m_{\text{liquid}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Partitioning Total Waste
  • Total Waste=∑mwaste streams=msolid+mliquid+mgas\text{Total Waste} = \sum m_{\text{waste streams}} = m_{\text{solid}} + m_{\text{liquid}} + m_{\text{gas}}

  • Write down the complete waste inventory and subtract all pre-existing or unavoidable waste streams from the allowable total waste ceiling.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express the waste balance: mtotal waste=msolid waste+msolvent/wash wastem_{\text{total waste}} = m_{\text{solid waste}} + m_{\text{solvent/wash waste}}

  2. Rearrange to isolate the target quantity: msolvent/wash waste, max=212.50 kg−42.50 kgm_{\text{solvent/wash waste, max}} = 212.50\text{ kg} - 42.50\text{ kg}

  3. Compute the result: 170.00 kg170.00\text{ kg}

Final answer

170.00 kg170.00\text{ kg}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out a constituent sum for total waste (e.g., Total Waste=Solvent+Solids+Byproducts\text{Total Waste} = \text{Solvent} + \text{Solids} + \text{Byproducts}) before solving for an individual component.

  • Review the given parameters in the problem statement to confirm that every specified waste stream is accounted for in your final mass balance.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets the E-factor denominator as the total mass of all inputs/outputs rather than API product alone, incorrectly including the product mass in the waste definition or subtracting product mass.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    maximum total waste=25.00×8.50 kg=212.50 kg\text{maximum total waste} = 25.00 \times 8.50\text{ kg} = 212.50\text{ kg}

  2. Step 2

    maximum liquid waste=212.50 kg−42.50 kg−8.50 kg=161.50 kg\text{maximum liquid waste} = 212.50\text{ kg} - 42.50\text{ kg} - 8.50\text{ kg} = 161.50\text{ kg}

    Correct

    msolvent/wash waste, max=212.50 kg−42.50 kg=170.00 kgm_{\text{solvent/wash waste, max}} = 212.50\text{ kg} - 42.50\text{ kg} = 170.00\text{ kg}

    The calculated 212.50 kg212.50\text{ kg} already represents pure waste. Total waste consists only of solid waste and liquid waste (mtotal waste=msolid+mliquidm_{\text{total waste}} = m_{\text{solid}} + m_{\text{liquid}}). The isolated API product (8.50 kg8.50\text{ kg}) is not part of this waste pool, so subtracting it reduces the allowable liquid waste unnecessarily.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up the relationship between the E-factorE\text{-factor} and the mass of the desired API product.

You accurately calculated the numerical product 25.00×8.50 kg=212.50 kg25.00 \times 8.50\text{ kg} = 212.50\text{ kg}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conflating total waste with total process mass

You subtracted the product mass (8.50 kg8.50\text{ kg}) alongside the solid waste from the maximum total waste mass.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the total waste (212.50 kg212.50\text{ kg}) as if it were the total process input mass (such as in Process Mass Intensity, PMI\text{PMI}), where total mass equals waste plus product. Because E-factor=mwastemproductE\text{-factor} = \frac{m_{\text{waste}}}{m_{\text{product}}}, the value 212.50 kg212.50\text{ kg} accounts solely for discarded waste and does not include the product.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish Waste Mass from Total Process Mass
  • mwaste, total=msolid waste+mliquid wastem_{\text{waste, total}} = m_{\text{solid waste}} + m_{\text{liquid waste}}, whereas minputs=mwaste, total+mproductm_{\text{inputs}} = m_{\text{waste, total}} + m_{\text{product}}.

  • Check whether the calculated quantity represents waste only or total input mass before subtracting individual components.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the waste balance: mtotal waste, max=msolid waste+msolvent/wash waste, maxm_{\text{total waste, max}} = m_{\text{solid waste}} + m_{\text{solvent/wash waste, max}}.

  2. Substitute the known values without including the API product mass: 212.50 kg=42.50 kg+msolvent/wash waste, max212.50\text{ kg} = 42.50\text{ kg} + m_{\text{solvent/wash waste, max}}.

  3. Solve for the maximum liquid waste: msolvent/wash waste, max=212.50 kg−42.50 kg=170.00 kgm_{\text{solvent/wash waste, max}} = 212.50\text{ kg} - 42.50\text{ kg} = 170.00\text{ kg}.

Final answer

Maximum allowable solvent and aqueous waste=170.00 kg\text{Maximum allowable solvent and aqueous waste} = 170.00\text{ kg}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the fundamental difference between E-factorE\text{-factor} (waste-to-product ratio) and PMI\text{PMI} (input-to-product ratio).

  • Practice partitioning process mass balances clearly between desired product streams and waste streams.

OverviewACEpath Teacher's Diagnosis

03 The student divides the solid waste by the threshold E-factor instead of multiplying the product mass by the E-factor.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    waste limit=42.50 kg/25.00=1.70 kg\text{waste limit} = 42.50\text{ kg} / 25.00 = 1.70\text{ kg}

    Correct

    mtotal waste, max=E-factormax⁡⋅mAPI=25.00⋅8.50 kg=212.50 kgm_{\text{total waste, max}} = E\text{-factor}_{\max} \cdot m_{\text{API}} = 25.00 \cdot 8.50\text{ kg} = 212.50\text{ kg}

    You divided the solid waste mass by the E-factorE\text{-factor} threshold. By definition, E-factor=mtotal wastemproductE\text{-factor} = \frac{m_{\text{total waste}}}{m_{\text{product}}}, which means the total allowable waste is found by multiplying the desired product mass (8.50 kg8.50\text{ kg}) by the target E-factorE\text{-factor} (25.0025.00).

  2. Step 2

    maximum liquid waste=8.50 kg−1.70 kg=6.80 kg\text{maximum liquid waste} = 8.50\text{ kg} - 1.70\text{ kg} = 6.80\text{ kg}

    Correct

    msolvent/wash waste, max=mtotal waste, max−msolid waste=212.50 kg−42.50 kg=170.00 kgm_{\text{solvent/wash waste, max}} = m_{\text{total waste, max}} - m_{\text{solid waste}} = 212.50\text{ kg} - 42.50\text{ kg} = 170.00\text{ kg}

    You subtracted your intermediate value from the product mass (8.50 kg8.50\text{ kg}). To find the remaining liquid waste allowance, you must subtract the unavoidable solid waste (42.50 kg42.50\text{ kg}) from the total maximum allowable waste (212.50 kg212.50\text{ kg}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified all the numerical inputs given in the problem.

You understood that finding a specific waste fraction requires a subtraction between a total limit and a known portion.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Rearrangement & Metric Definition

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the roles of product mass and waste components within the E-factorE\text{-factor} definition, leading to dividing solid waste by the E-factorE\text{-factor} and confusing product mass with the total waste budget.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define the Environmental Factor
  • E-factor=Total Mass of WasteMass of Desired ProductE\text{-factor} = \frac{\text{Total Mass of Waste}}{\text{Mass of Desired Product}}

  • Always set the numerator equal to the sum of all waste streams (solids, unrecovered solvents, aqueous washes) and the denominator strictly to the isolated product mass.

Calculate the Waste Ceiling
  • mtotal waste, max=(E-factormax⁡)⋅mproductm_{\text{total waste, max}} = (E\text{-factor}_{\max}) \cdot m_{\text{product}}

  • Multiply the target threshold by the mass of product isolated per batch to find the total allowable waste budget.

Partition the Waste Streams
  • mtotal waste=msolid waste+mliquid wastem_{\text{total waste}} = m_{\text{solid waste}} + m_{\text{liquid waste}}

  • Subtract the unavoidable solid waste from the total waste budget to isolate the maximum permissible liquid waste.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Rearrange the E-factorE\text{-factor} formula for maximum total waste: mtotal waste, max=25.00⋅8.50 kg=212.50 kgm_{\text{total waste, max}} = 25.00 \cdot 8.50\text{ kg} = 212.50\text{ kg}.

  2. Set up the mass balance for total waste: mtotal waste=msolid waste+msolvent/wash wastem_{\text{total waste}} = m_{\text{solid waste}} + m_{\text{solvent/wash waste}}.

  3. Subtract the unavoidable solid waste: msolvent/wash waste, max=212.50 kg−42.50 kg=170.00 kgm_{\text{solvent/wash waste, max}} = 212.50\text{ kg} - 42.50\text{ kg} = 170.00\text{ kg}.

Final answer

Maximum allowable solvent/wash waste=170.00 kg\text{Maximum allowable solvent/wash waste} = 170.00\text{ kg}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the formal definition of Green Chemistry metrics, specifically contrasting E-factorE\text{-factor} (waste over product) and Process Mass Intensity (total inputs over product).

  • Write out the algebraic formula with explicit descriptive subscripts before substituting numbers to avoid pairing the wrong mass with the metric threshold.

Lock it in

Similar question

01

A batch reaction yields 12.0 kg12.0\text{ kg} of purified agrochemical active ingredient. Company sustainability guidelines require that the process E-factorE\text{-factor} not exceed 15.015.0. If the synthesis generates 35.0 kg35.0\text{ kg} of spent filter cake and inorganic by-products, calculate the maximum permissible mass (in kg\text{kg}) of solvent waste that can be discarded per batch.

Answer

145.0 kg145.0\text{ kg}. Key steps: (1) mtotal waste, max=15.0×12.0 kg=180.0 kgm_{\text{total waste, max}} = 15.0 \times 12.0\text{ kg} = 180.0\text{ kg}. (2) msolvent, max=180.0 kg−35.0 kg=145.0 kgm_{\text{solvent, max}} = 180.0\text{ kg} - 35.0\text{ kg} = 145.0\text{ kg}.

02

A biocatalytic synthesis produces 5.00 kg5.00\text{ kg} of a chiral intermediate per run. Regulatory limits restrict the process E-factorE\text{-factor} to at most 30.0030.00. The reaction generates 18.50 kg18.50\text{ kg} of spent immobilized enzyme/resin and 31.50 kg31.50\text{ kg} of aqueous buffer waste. Determine the maximum allowable mass (in kg\text{kg}) of organic extraction solvent that can be lost as waste per run without exceeding the threshold.

Answer

100.00 kg100.00\text{ kg}. Key steps: (1) mtotal waste, max=30.00×5.00 kg=150.00 kgm_{\text{total waste, max}} = 30.00 \times 5.00\text{ kg} = 150.00\text{ kg}. (2) morganic solvent, max=150.00 kg−(18.50 kg+31.50 kg)=150.00 kg−50.00 kg=100.00 kgm_{\text{organic solvent, max}} = 150.00\text{ kg} - (18.50\text{ kg} + 31.50\text{ kg}) = 150.00\text{ kg} - 50.00\text{ kg} = 100.00\text{ kg}.

03

A continuous chemical process produces an active pharmaceutical ingredient with a Process Mass Intensity (PMI) of 18.018.0. If the synthesis yields 10.0 kg10.0\text{ kg} of API and produces 20.0 kg20.0\text{ kg} of insoluble catalyst and salt waste, determine the mass of liquid waste generated. (Recall: PMI=E-factor+1\text{PMI} = E\text{-factor} + 1).

Answer

150.0 kg150.0\text{ kg}. Key steps: (1) E-factor=PMI−1=18.0−1=17.0E\text{-factor} = \text{PMI} - 1 = 18.0 - 1 = 17.0. (2) mtotal waste=17.0×10.0 kg=170.0 kgm_{\text{total waste}} = 17.0 \times 10.0\text{ kg} = 170.0\text{ kg}. (3) mliquid waste=mtotal waste−msolid waste=170.0 kg−20.0 kg=150.0 kgm_{\text{liquid waste}} = m_{\text{total waste}} - m_{\text{solid waste}} = 170.0\text{ kg} - 20.0\text{ kg} = 150.0\text{ kg}.

Loading workspace…