Resources
A student investigates the boundary between homogeneous solutions, colloidal dispersions, and heterogeneous suspensions. Container 1 contains sodium chloride completely dissolved in distilled water (). Container 2 contains a colloidal sol of ferric hydroxide () with particle diameters ranging from to . Container 3 contains a suspension of fine quartz sand (particle diameter ) shaken vigorously in water. A red laser diode beam () is directed horizontally through each container in a dark room. (a) Classify Containers 1, 2, and 3 as homogeneous mixture, heterogeneous mixture (colloid), or heterogeneous mixture (suspension). (b) State which container(s) will clearly exhibit a visible beam path due to the Tyndall effect, and specify which container can be separated by standard gravity filtration through qualitative filter paper (pore size ).
Answer and steps
Final answer
(a) Container 1 is a homogeneous mixture (true solution); Container 2 is a heterogeneous mixture (colloid / sol); Container 3 is a heterogeneous mixture (suspension). (b) Container 2 (colloid) and Container 3 (suspension) exhibit the Tyndall effect (visible scattered light path), while Container 1 shows no Tyndall scattering; only Container 3 can be separated by standard gravity filtration (pore size ), whereas Container 1 and Container 2 will pass through the filter paper completely unseparated.
Steps
The Tyndall Effect (Light Scattering)
Part (a): Classifying the Mixtures
Mixtures are classified based on particle size, phase distribution, and uniformity:
- Container 1 (): Homogeneous mixture (True solution)
- Basis: The dissolved sodium ions () and chloride ions () are completely surrounded by water molecules (hydrated), with individual particle diameters typically well under . Because the composition and properties are completely uniform throughout a single physical phase, it is a homogeneous mixture.
- Container 2 ( sol): Heterogeneous mixture (Colloid)
- Basis: Colloidal particles have intermediate dimensions, typically ranging between and . The particles ( to ) represent a dispersed phase distributed within a continuous dispersion medium (water). Because it consists of two distinct phases at the microscale, it is classified as a heterogeneous mixture.
- Container 3 (Quartz sand in water): Heterogeneous mixture (Suspension)
- Basis: Suspensions contain dispersed particles larger than (). Here, the sand grains exceed , do not dissolve, and will spontaneously settle out under gravity when resting. It is therefore a heterogeneous mixture.
Part (b): Tyndall Effect and Filtration Behavior
The Tyndall effect occurs when light is scattered by particles suspended in a medium, illuminating the path of the beam.
- Container 1 (Solution): Does not exhibit the Tyndall effect. The dissolved ions are much smaller than the wavelength of red laser light (), so light passes through without noticeable scattering; the beam path inside the liquid remains invisible.
- Container 2 (Colloid): Exhibits a distinct Tyndall effect. The to particles are large enough to scatter the visible light laterally, making the red beam clearly visible across the liquid.
- Container 3 (Suspension): Exhibits strong light scattering. The large quartz sand particles () intensely scatter (and reflect) the incident laser light along the beam path.
Separation by Gravity Filtration
Qualitative filter paper has an average pore opening of approximately ().
- Containers 1 and 2: Individual ions in Container 1 () and colloidal particles in Container 2 ( to ) are orders of magnitude smaller than the pores. Both pass entirely through the filter paper into the filtrate without separation.
- Container 3: Only the suspended quartz sand particles are large enough (coarse sand fractions ) to be mechanically trapped by the paper pores, allowing the solid to be separated from the water by standard gravity filtration.
Key Pitfall: A colloid often appears clear or semi-translucent to the naked eye, leading some to mistake it for a homogeneous solution. However, colloidal particles are large enough to scatter light (Tyndall effect) and constitute a two-phase heterogeneous system, even though they pass through conventional filter paper like a solution.
Typical errors
01 A student mistakenly believes colloids are homogeneous mixtures because they appear uniform to the naked eye and do not settle over time.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Container 1: homogeneous mixture
- Step 2
Container 2: homogeneous mixture
CorrectContainer 2: heterogeneous mixture (colloid)
You classified Container 2 as a homogeneous mixture, but colloids consist of dispersed particles ( to ) distributed in a separate continuous medium, making them heterogeneous.
- Step 3
Container 3: heterogeneous mixture (suspension)
- Step 4
Tyndall effect: Container 2
CorrectTyndall effect: Container 2 and Container 3
You identified that the colloid exhibits the Tyndall effect, but suspended particles in Container 3 are also large enough to scatter visible laser light and show a visible beam path.
- Step 5
Filtration: Container 3
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that a completely dissolved salt solution is a homogeneous mixture.
You accurately identified the quartz sand mixture as a suspension.
You recognized that the ferric hydroxide colloidal sol scatters light via the Tyndall effect.
You correctly determined that only the suspension is retained by qualitative filter paper.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou relied on macroscopic visual uniformity rather than microscopic phase boundaries to classify colloids, leading you to classify the colloid as a homogeneous mixture and overlook that suspensions also scatter visible light.
REASONING PATH
Your ACEpath teacher’s suggested approach- Microscopic Phase Rule for Colloids
A homogeneous mixture consists of a single phase with solute particles under . A colloid consists of distinct dispersed particles ( to ) in a continuous phase and is heterogeneous.
Check whether the particle size falls in the colloidal range ( to ); if so, classify it as a heterogeneous mixture.
- Tyndall Scattering Criterion
Any dispersed particle system with particle dimensions comparable to or larger than the wavelength of visible light (both colloids and suspensions) scatters light.
Include both colloids and suspensions when identifying mixtures that display a visible light beam path.
CORRECTED PATH
ACEpath Teacher's DemonstrationRe-evaluate the phase structure of Container 2: because particles are to , they form a two-phase dispersed system, classifying Container 2 as a heterogeneous mixture (colloid).
Re-evaluate light scattering in Container 3: particles larger than also scatter the red laser beam, illuminating the path across the suspension.
(a) Container 1: homogeneous mixture; Container 2: heterogeneous mixture (colloid); Container 3: heterogeneous mixture (suspension). (b) Tyndall effect / visible beam path: Container 2 and Container 3; Gravity filtration separation: Container 3.
02 A student incorrectly assumes that true solutions also exhibit the Tyndall effect, confusing light transmission with light scattering.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Container 1: homogeneous mixture ⟹ Container 2: heterogeneous mixture (colloid) ⟹ Container 3: heterogeneous mixture (suspension)
- Step 2
Tyndall effect: Containers 1 and 2
CorrectContainers 2 and 3
In Container 1 (), the dissolved and ions are smaller than , so they transmit light without scattering it. The laser path is visible in Container 2 (colloid, ) and Container 3 (suspension, ) because their larger dispersed particles scatter light laterally.
- Step 3
Filtration: Container 3
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly classified all three mixtures into homogeneous solution, colloid, and suspension.
You correctly determined that only the suspension in Container 3 can be separated by standard gravity filtration.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused light transmission through a clear solution with light scattering by dispersed particles, while overlooking that suspensions also scatter visible light.
REASONING PATH
Your ACEpath teacher’s suggested approach- Particle Size vs. Light Scattering
True solutions contain individual ions or molecules () that do not scatter visible light, leaving the beam path invisible. Colloids () and suspensions () contain particles large enough to scatter light (Tyndall effect).
To decide whether a mixture shows the Tyndall effect, check if dispersed particles are at least ; exclude true solutions and include both colloids and suspensions.
CORRECTED PATH
ACEpath Teacher's DemonstrationEvaluate the particle size of Container 1 (): , so no visible scattering occurs.
Evaluate Container 2 (colloid) and Container 3 (suspension): both have particles ( and ) large enough to scatter the laser beam laterally.
Conclude that Containers 2 and 3 exhibit a visible light path due to the Tyndall effect.
(a) Container 1: homogeneous mixture; Container 2: heterogeneous mixture (colloid); Container 3: heterogeneous mixture (suspension). (b) Tyndall effect: Containers 2 and 3; Filtration: Container 3.
03 A student confuses the particle size limits of qualitative filter paper, believing colloidal particles can be separated by ordinary gravity filtration.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Container 1: homogeneous mixture ⟹ Container 2: heterogeneous mixture (colloid) ⟹ Container 3: heterogeneous mixture (suspension)
- Step 2
Tyndall effect: Container 2
CorrectContainers 2 and 3 exhibit a visible beam path due to light scattering.
You identified that the colloid in Container 2 scatters light, but the suspended particles in Container 3 are also much larger than the wavelength of visible light and produce a visible scattered beam path.
- Step 3
Filtration: Containers 2 and 3
CorrectOnly Container 3 can be separated by standard gravity filtration.
Colloidal particles in Container 2 have diameters of to ( to ), which are far smaller than the pores of standard filter paper. Therefore, the colloid passes completely through the paper without separating.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly distinguished homogeneous solutions from colloids and suspensions based on particle scale.
You recognized that the colloid in Container 2 exhibits the Tyndall effect.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou omitted Container 3 from the light-scattering containers even though suspensions strongly scatter and reflect visible light.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed that because colloids are heterogeneous mixtures, their particles are large enough to be retained by standard filter paper, overlooking that colloidal particles () easily pass through pores.
REASONING PATH
Your ACEpath teacher’s suggested approach- Comparing Particle Size to Filter Pore Size
Particles are only retained if their diameter exceeds the filter pore size. Qualitative filter paper has pores around ().
Convert both measurements to the same unit before deciding whether filtration is possible; colloids () pass through ordinary filter paper.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert the filter pore size to nanometers: .
Compare the particle sizes: colloidal is , so it passes through; quartz sand particles are (with typical sand grains exceeding ), so they are retained.
Check beam scattering: both colloids () and suspensions () scatter visible light ().
(a) Container 1: homogeneous mixture; Container 2: heterogeneous mixture (colloid); Container 3: heterogeneous mixture (suspension). (b) Tyndall effect: Containers 2 and 3; Gravity filtration: Container 3 only.
Lock it in
Why is a colloidal sol classified as a heterogeneous mixture even if it appears completely uniform to the naked eye?
It contains two distinct phases: a dispersed phase of nanoscale particles ( to ) and a continuous dispersion medium.
Similar question
A liquid sample of homogenized milk appears uniform to the eye and does not settle upon standing. Under high magnification, fat globules averaging in diameter are dispersed in water. (a) Classify milk as a homogeneous mixture, colloid, or suspension. (b) Predict whether it will exhibit the Tyndall effect.
Answer
(a) Heterogeneous mixture (colloid / emulsion), because the fat droplets () lie within the to colloidal range. (b) Yes, it will exhibit strong Tyndall scattering because the dispersed droplets readily scatter visible light.
Two unlabeled beakers contain clear, colorless liquids. When a green laser beam passes through Beaker A, no path is visible. When passed through Beaker B, a clear bright line is visible. Both liquids pass through standard filter paper without leaving residue. Identify the mixture type in each beaker.
Answer
Beaker A is a true solution (homogeneous mixture), where solute particles () are too small to scatter light. Beaker B is a colloidal dispersion (heterogeneous mixture), where particles () scatter the laser beam but are small enough to pass through standard filter paper pores.
A mixture contains dissolved glucose (), colloidal gold particles (), and chalk powder () in water. Outline a two-step physical separation process to isolate each component into distinct fractions using standard gravity filter paper (pore size ) and a semipermeable dialysis membrane (pore size ).
Answer
Step 1: Perform gravity filtration through paper; the chalk powder () is retained as residue, while glucose and colloidal gold pass into the filtrate. Step 2: Place the filtrate into a dialysis membrane surrounded by pure water; glucose molecules () diffuse out through the membrane, leaving the colloidal gold () trapped inside.