Resources

In a constant-pressure coffee-cup calorimeter, a 55.0 g55.0\text{ g} sample of an alloy heated to 99.5∘C99.5^\circ\text{C} is submerged into 100.0 g100.0\text{ g} of distilled water initially at 21.0∘C21.0^\circ\text{C}. The calorimeter has a negligible heat capacity. The mixture reaches a thermal equilibrium temperature of 24.8∘C24.8^\circ\text{C}. Given cwater=4.184 J/(g⋅∘C)c_{\text{water}} = 4.184\text{ J}/(\text{g}\cdot^\circ\text{C}), calculate the temperature change of the water (ΔTwater\Delta T_{\text{water}}), the temperature change of the alloy (ΔTalloy\Delta T_{\text{alloy}}), and the specific heat capacity cc of the alloy.

Answer and steps

Final answer

ΔTwater=+3.8∘C\Delta T_{\text{water}} = +3.8^\circ\text{C}, ΔTalloy=−74.7∘C\Delta T_{\text{alloy}} = -74.7^\circ\text{C}, calloy=0.387 J/(g⋅∘C)c_{\text{alloy}} = 0.387\text{ J}/(\text{g}\cdot^\circ\text{C})

Steps

01

Calculate the Temperature Change for Each Substance

The change in temperature (ΔT\Delta T) is defined as the final equilibrium temperature (TfT_f) minus the initial temperature (TiT_i): ΔT=Tf−Ti\Delta T = T_f - T_i

  • For the water: ΔTwater=24.8∘C−21.0∘C=+3.8∘C\Delta T_{\text{water}} = 24.8^\circ\text{C} - 21.0^\circ\text{C} = +3.8^\circ\text{C}
  • For the alloy sample: ΔTalloy=24.8∘C−99.5∘C=−74.7∘C\Delta T_{\text{alloy}} = 24.8^\circ\text{C} - 99.5^\circ\text{C} = -74.7^\circ\text{C}

Key Pitfall: Always calculate temperature change as ΔT=Tf−Ti\Delta T = T_f - T_i, keeping track of the negative sign when a substance cools down.


02

Determine the Heat Absorbed by the Water

Using the sensible heat formula q=m⋅c⋅ΔTq = m \cdot c \cdot \Delta T: qwater=mwater⋅cwater⋅ΔTwaterq_{\text{water}} = m_{\text{water}} \cdot c_{\text{water}} \cdot \Delta T_{\text{water}}

Substitute the given values: qwater=(100.0 g)⋅(4.184 J/(g⋅∘C))⋅(3.8∘C)=+1589.92 Jq_{\text{water}} = (100.0\text{ g}) \cdot \left(4.184\text{ J}/(\text{g}\cdot^\circ\text{C})\right) \cdot (3.8^\circ\text{C}) = +1589.92\text{ J}


03

Apply the Principle of Conservation of Energy

Assuming the calorimeter is an isolated system with negligible heat capacity, the heat lost by the hot metal equals the heat gained by the water: qalloy+qwater=0  ⟹  qalloy=−qwaterq_{\text{alloy}} + q_{\text{water}} = 0 \implies q_{\text{alloy}} = -q_{\text{water}}

Therefore: qalloy=−1589.92 Jq_{\text{alloy}} = -1589.92\text{ J}


04

Solve for the Specific Heat Capacity of the Alloy

Express qalloyq_{\text{alloy}} in terms of its mass, specific heat capacity, and temperature change: qalloy=malloy⋅calloy⋅ΔTalloyq_{\text{alloy}} = m_{\text{alloy}} \cdot c_{\text{alloy}} \cdot \Delta T_{\text{alloy}}

Rearrange to solve for calloyc_{\text{alloy}}: calloy=qalloymalloy⋅ΔTalloyc_{\text{alloy}} = \frac{q_{\text{alloy}}}{m_{\text{alloy}} \cdot \Delta T_{\text{alloy}}}

Substitute the values: calloy=−1589.92 J(55.0 g)⋅(−74.7∘C)=1589.924108.5 J/(g⋅∘C)≈0.387 J/(g⋅∘C)c_{\text{alloy}} = \frac{-1589.92\text{ J}}{(55.0\text{ g}) \cdot (-74.7^\circ\text{C})} = \frac{1589.92}{4108.5}\text{ J}/(\text{g}\cdot^\circ\text{C}) \approx 0.387\text{ J}/(\text{g}\cdot^\circ\text{C})

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student omits the negative sign in the heat exchange relationship (using qalloy = qwater instead of qalloy = -qwater), resulting in a negative specific heat capacity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔTwater=24.8∘C−21.0∘C=3.8∘C  ⟹  ΔTalloy=24.8∘C−99.5∘C=−74.7∘C\Delta T_{\text{water}} = 24.8^\circ\text{C} - 21.0^\circ\text{C} = 3.8^\circ\text{C} \implies \Delta T_{\text{alloy}} = 24.8^\circ\text{C} - 99.5^\circ\text{C} = -74.7^\circ\text{C}

  2. Step 2

    qwater=100.0 g×4.184 J/(g⋅∘C)×3.8∘C=1589.92 Jq_{\text{water}} = 100.0\text{ g} \times 4.184\text{ J}/(\text{g}\cdot^\circ\text{C}) \times 3.8^\circ\text{C} = 1589.92\text{ J}

  3. Step 3

    qalloy=qwater=1589.92 Jq_{\text{alloy}} = q_{\text{water}} = 1589.92\text{ J}

    Correct

    qalloy=−qwater=−1589.92 Jq_{\text{alloy}} = -q_{\text{water}} = -1589.92\text{ J}

    By the conservation of energy in an insulated calorimeter, the heat lost by the metal must equal the heat gained by the water (qalloy+qwater=0q_{\text{alloy}} + q_{\text{water}} = 0). Since the alloy released heat, its heat change must be negative: qalloy=−1589.92 Jq_{\text{alloy}} = -1589.92\text{ J}.

  4. Step 4

    calloy=1589.92 J/(55.0 g×(−74.7∘C))=−0.387 J/(g⋅∘C)c_{\text{alloy}} = 1589.92\text{ J} / (55.0\text{ g} \times (-74.7^\circ\text{C})) = -0.387\text{ J}/(\text{g}\cdot^\circ\text{C})

    Correct

    calloy=−1589.92 J55.0 g×(−74.7∘C)≈0.387 J/(g⋅∘C)c_{\text{alloy}} = \frac{-1589.92\text{ J}}{55.0\text{ g} \times (-74.7^\circ\text{C})} \approx 0.387\text{ J}/(\text{g}\cdot^\circ\text{C})

    You correctly rearranged the formula to solve for specific heat capacity, but carrying forward the positive qalloyq_{\text{alloy}} produced a negative value. Specific heat capacity is an intrinsic physical property that must always be positive.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the temperature changes ΔT\Delta T as final temperature minus initial temperature.

You correctly determined the heat absorbed by the water using the heat equation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of negative sign in calorimetry heat balance

You set qalloy=qwaterq_{\text{alloy}} = q_{\text{water}} rather than recognizing that heat lost carries an opposite sign to heat gained (qlost=−qgainedq_{\text{lost}} = -q_{\text{gained}}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Misinterpreting the statement 'heat lost equals heat gained' as an algebraic identity q1=q2q_1 = q_2, forgetting that thermodynamic heat flow into a cooling system is exothermic (q<0q < 0) while heat flow into a warming system is endothermic (q>0q > 0).

REASONING PATH
Your ACEpath teacher’s suggested approach
Calorimetry Energy Balance
  • In an isolated system at constant pressure, ∑q=0\sum q = 0, which gives qsystem=−qsurroundingsq_{\text{system}} = -q_{\text{surroundings}} (or qlost=−qgainedq_{\text{lost}} = -q_{\text{gained}}).

  • Always write qmetal=−qwaterq_{\text{metal}} = -q_{\text{water}} before substituting values.

Physical Reasonableness of Specific Heat
  • Specific heat capacity cc measures the energy required to raise the temperature of 1 g1\text{ g} by 1∘C1^\circ\text{C} and must always be a positive quantity (c>0c > 0).

  • If your calculated specific heat capacity is negative, immediately check for a missing negative sign in qq or ΔT\Delta T.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the first law of thermodynamics to the calorimeter: qalloy+qwater=0  ⟹  qalloy=−qwater=−1589.92 Jq_{\text{alloy}} + q_{\text{water}} = 0 \implies q_{\text{alloy}} = -q_{\text{water}} = -1589.92\text{ J}.

  2. Substitute qalloyq_{\text{alloy}} and ΔTalloy\Delta T_{\text{alloy}} into the rearranged heat capacity equation: calloy=qalloymalloyΔTalloy=−1589.92 J(55.0 g)(−74.7∘C)c_{\text{alloy}} = \frac{q_{\text{alloy}}}{m_{\text{alloy}} \Delta T_{\text{alloy}}} = \frac{-1589.92\text{ J}}{(55.0\text{ g})(-74.7^\circ\text{C})}.

  3. Evaluate the quotient: calloy=−1589.92−4108.5 J/(g⋅∘C)≈0.387 J/(g⋅∘C)c_{\text{alloy}} = \frac{-1589.92}{-4108.5}\text{ J}/(\text{g}\cdot^\circ\text{C}) \approx 0.387\text{ J}/(\text{g}\cdot^\circ\text{C}).

Final answer

ΔTwater=+3.8∘C,  ΔTalloy=−74.7∘C,  calloy=0.387 J/(g⋅∘C)\Delta T_{\text{water}} = +3.8^\circ\text{C},\; \Delta T_{\text{alloy}} = -74.7^\circ\text{C},\; c_{\text{alloy}} = 0.387\text{ J}/(\text{g}\cdot^\circ\text{C})

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the full conservation law qcold+qhot=0q_{\text{cold}} + q_{\text{hot}} = 0 as your starting line for all calorimetry problems.

  • Perform a sanity check on your final numerical answer to ensure physical quantities such as specific heat capacity are strictly positive.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the order of temperatures when calculating ΔTalloy as Tinitial - Tfinal instead of Tfinal - Tinitial, arriving at a positive temperature change of 74.7°C.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔTwater=24.8∘C−21.0∘C=3.8∘C\Delta T_{\text{water}} = 24.8^\circ\text{C} - 21.0^\circ\text{C} = 3.8^\circ\text{C}

  2. Step 2

    ΔTalloy=99.5∘C−24.8∘C=74.7∘C\Delta T_{\text{alloy}} = 99.5^\circ\text{C} - 24.8^\circ\text{C} = 74.7^\circ\text{C}

    Correct

    ΔTalloy=Tf−Ti=24.8∘C−99.5∘C=−74.7∘C\Delta T_{\text{alloy}} = T_f - T_i = 24.8^\circ\text{C} - 99.5^\circ\text{C} = -74.7^\circ\text{C}

    Temperature change is defined strictly as ΔT=Tfinal−Tinitial\Delta T = T_{\text{final}} - T_{\text{initial}}. Because the alloy cooled down, its temperature change must be negative.

  3. Step 3

    qwater=100.0 g×4.184 J/(g⋅∘C)×3.8∘C=1589.92 Jq_{\text{water}} = 100.0\text{ g} \times 4.184\text{ J}/(\text{g}\cdot^\circ\text{C}) \times 3.8^\circ\text{C} = 1589.92\text{ J}

  4. Step 4

    qalloy=−qwater=−1589.92 Jq_{\text{alloy}} = -q_{\text{water}} = -1589.92\text{ J}

  5. Step 5

    calloy=−1589.92 J/(55.0 g×74.7∘C)=−0.387 J/(g⋅∘C)c_{\text{alloy}} = -1589.92\text{ J} / (55.0\text{ g} \times 74.7^\circ\text{C}) = -0.387\text{ J}/(\text{g}\cdot^\circ\text{C})

    Correct

    calloy=−1589.92 J(55.0 g)(−74.7∘C)=0.387 J/(g⋅∘C)c_{\text{alloy}} = \frac{-1589.92\text{ J}}{(55.0\text{ g})(-74.7^\circ\text{C})} = 0.387\text{ J}/(\text{g}\cdot^\circ\text{C})

    Your algebra was executed accurately, but propagating the incorrect positive sign for ΔTalloy\Delta T_{\text{alloy}} produced a negative specific heat capacity.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the definition of temperature change for water.

You accurately calculated the sensible heat absorbed by the water.

You correctly set qalloy=−qwaterq_{\text{alloy}} = -q_{\text{water}} to express conservation of energy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Temperature change sign reversal

You set up ΔTalloy\Delta T_{\text{alloy}} as higher temperature minus lower temperature (Ti−TfT_i - T_f) rather than Tf−TiT_f - T_i.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated ΔT\Delta T as an absolute temperature difference rather than a signed change (Tf−TiT_f - T_i), which left qalloyq_{\text{alloy}} and ΔTalloy\Delta T_{\text{alloy}} with mismatched signs.

REASONING PATH
Your ACEpath teacher’s suggested approach
Always Use $T_{\text{final}} - T_{\text{initial}}$
  • In thermodynamics, ΔT=Tf−Ti\Delta T = T_f - T_i regardless of whether the substance warms up or cools down.

  • Check the sign: if an object cools down, its ΔT\Delta T must be negative.

Physical Reality of Specific Heat Capacity
  • Specific heat capacity cc is an intrinsic physical constant and must always be positive (c>0c > 0).

  • If your calculated cc comes out negative, check whether you dropped or added an extra negative sign in qq or ΔT\Delta T.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute ΔTalloy=Tf−Ti=24.8∘C−99.5∘C=−74.7∘C\Delta T_{\text{alloy}} = T_f - T_i = 24.8^\circ\text{C} - 99.5^\circ\text{C} = -74.7^\circ\text{C}.

  2. Substitute into calloy=qalloymalloy⋅ΔTalloy=−1589.92 J(55.0 g)(−74.7∘C)c_{\text{alloy}} = \frac{q_{\text{alloy}}}{m_{\text{alloy}} \cdot \Delta T_{\text{alloy}}} = \frac{-1589.92\text{ J}}{(55.0\text{ g})(-74.7^\circ\text{C})}.

  3. Notice that the negative signs cancel out, giving calloy=0.387 J/(g⋅∘C)c_{\text{alloy}} = 0.387\text{ J}/(\text{g}\cdot^\circ\text{C}).

Final answer

ΔTwater=+3.8∘C\Delta T_{\text{water}} = +3.8^\circ\text{C}, ΔTalloy=−74.7∘C\Delta T_{\text{alloy}} = -74.7^\circ\text{C}, calloy=0.387 J/(g⋅∘C)c_{\text{alloy}} = 0.387\text{ J}/(\text{g}\cdot^\circ\text{C})

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out ΔT=Tf−Ti\Delta T = T_f - T_i explicitly before plugging in numbers so you never subtract in reverse.

  • Perform a sanity check on your final specific heat value to ensure c>0c > 0.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the mass of the alloy with the mass of the water, substituting 100.0 g instead of 55.0 g into the equation for the alloy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔTwater=24.8∘C−21.0∘C=3.8∘C\Delta T_{\text{water}} = 24.8^\circ\text{C} - 21.0^\circ\text{C} = 3.8^\circ\text{C}

  2. Step 2

    ΔTalloy=24.8∘C−99.5∘C=−74.7∘C\Delta T_{\text{alloy}} = 24.8^\circ\text{C} - 99.5^\circ\text{C} = -74.7^\circ\text{C}

  3. Step 3

    qwater=100.0 g×4.184 J/(g⋅∘C)×3.8∘C=1589.92 J  ⟹  qalloy=−1589.92 Jq_{\text{water}} = 100.0\text{ g} \times 4.184\text{ J}/(\text{g}\cdot^\circ\text{C}) \times 3.8^\circ\text{C} = 1589.92\text{ J} \implies q_{\text{alloy}} = -1589.92\text{ J}

  4. Step 4

    calloy=−1589.92 J/(100.0 g×(−74.7∘C))≈0.213 J/(g⋅∘C)c_{\text{alloy}} = -1589.92\text{ J} / (100.0\text{ g} \times (-74.7^\circ\text{C})) \approx 0.213\text{ J}/(\text{g}\cdot^\circ\text{C})

    Correct

    calloy=−1589.92 J(55.0 g)(−74.7∘C)≈0.387 J/(g⋅∘C)c_{\text{alloy}} = \frac{-1589.92\text{ J}}{(55.0\text{ g})(-74.7^\circ\text{C})} \approx 0.387\text{ J}/(\text{g}\cdot^\circ\text{C})

    You substituted the mass of the water (100.0 g100.0\text{ g}) into the equation for the alloy instead of using the mass of the alloy sample (55.0 g55.0\text{ g}).

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated both temperature changes correctly using final minus initial temperature.

You set up the heat equation for water and computed the heat absorbed accurately.

You correctly related the heat lost by the alloy to the heat gained by the water.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Variable Swapping / Index Confusion

You accidentally plugged in 100.0 g100.0\text{ g} (the mass of the water) into the denominator of calloyc_{\text{alloy}} rather than the alloy's own mass of 55.0 g55.0\text{ g}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In multi-component calorimetry problems with multiple mass values, failing to label variables with explicit subscripts (e.g., malloym_{\text{alloy}} vs. mwaterm_{\text{water}}) makes it easy to accidentally substitute the surrounding liquid's mass into the solid sample's equation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Subscript Consistency
  • Every parameter in q=m⋅c⋅ΔTq = m \cdot c \cdot \Delta T must belong to the exact same substance: qsubstance=msubstance⋅csubstance⋅ΔTsubstanceq_{\text{substance}} = m_{\text{substance}} \cdot c_{\text{substance}} \cdot \Delta T_{\text{substance}}.

  • Write out the variable names with explicit subscripts before substituting numbers to avoid mixing up components.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. calloy=qalloymalloy⋅ΔTalloyc_{\text{alloy}} = \frac{q_{\text{alloy}}}{m_{\text{alloy}} \cdot \Delta T_{\text{alloy}}}

  2. calloy=−1589.92 J(55.0 g)⋅(−74.7∘C)=−1589.92−4108.5 J/(g⋅∘C)≈0.387 J/(g⋅∘C)c_{\text{alloy}} = \frac{-1589.92\text{ J}}{(55.0\text{ g}) \cdot (-74.7^\circ\text{C})} = \frac{-1589.92}{-4108.5}\text{ J}/(\text{g}\cdot^\circ\text{C}) \approx 0.387\text{ J}/(\text{g}\cdot^\circ\text{C})

Final answer

ΔTwater=+3.8∘C\Delta T_{\text{water}} = +3.8^\circ\text{C}, ΔTalloy=−74.7∘C\Delta T_{\text{alloy}} = -74.7^\circ\text{C}, calloy=0.387 J/(g⋅∘C)c_{\text{alloy}} = 0.387\text{ J}/(\text{g}\cdot^\circ\text{C})

NEXT STEPS
Final Takeaways from Your Teacher
  • Explicitly list given variables in two separate columns (e.g., 'Alloy' vs. 'Water') before calculating.

  • Perform a quick sanity check on each variable when substituting into q=mcΔTq = mc\Delta T to verify that mass, specific heat, and temperature change all describe the same physical object.

Lock it in

Similar question

01

A 25.0 g25.0\text{ g} piece of unknown metal at 95.0∘C95.0^\circ\text{C} is placed into 50.0 g50.0\text{ g} of water (c=4.184 J/(g⋅∘C)c = 4.184\text{ J}/(\text{g}\cdot^\circ\text{C})) at 20.0∘C20.0^\circ\text{C}. The final equilibrium temperature is 23.5∘C23.5^\circ\text{C}. Calculate the specific heat capacity of the metal.

Answer

cmetal=0.410 J/(g⋅∘C)c_{\text{metal}} = 0.410\text{ J}/(\text{g}\cdot^\circ\text{C}). Key steps: ΔTwater=+3.5∘C\Delta T_{\text{water}} = +3.5^\circ\text{C}, qwater=(50.0)(4.184)(3.5)=+732.2 Jq_{\text{water}} = (50.0)(4.184)(3.5) = +732.2\text{ J}; qmetal=−732.2 Jq_{\text{metal}} = -732.2\text{ J}; ΔTmetal=23.5−95.0=−71.5∘C\Delta T_{\text{metal}} = 23.5 - 95.0 = -71.5^\circ\text{C}; c=−732.2 J(25.0 g)(−71.5∘C)≈0.410 J/(g⋅∘C)c = \frac{-732.2\text{ J}}{(25.0\text{ g})(-71.5^\circ\text{C})} \approx 0.410\text{ J}/(\text{g}\cdot^\circ\text{C}).

02

An iron bolt (c=0.449 J/(g⋅∘C)c = 0.449\text{ J}/(\text{g}\cdot^\circ\text{C})) at 85.0∘C85.0^\circ\text{C} is dropped into 120.0 g120.0\text{ g} of water at 18.0∘C18.0^\circ\text{C}. If the thermal equilibrium temperature is 21.2∘C21.2^\circ\text{C}, find the mass of the iron bolt.

Answer

miron=56.0 gm_{\text{iron}} = 56.0\text{ g}. Key steps: qwater=(120.0 g)(4.184 J/(g⋅∘C))(3.2∘C)=+1606.66 Jq_{\text{water}} = (120.0\text{ g})(4.184\text{ J}/(\text{g}\cdot^\circ\text{C}))(3.2^\circ\text{C}) = +1606.66\text{ J}; qiron=−1606.66 Jq_{\text{iron}} = -1606.66\text{ J}; ΔTiron=21.2−85.0=−63.8∘C\Delta T_{\text{iron}} = 21.2 - 85.0 = -63.8^\circ\text{C}; m=qcΔT=−1606.66 J(0.449 J/(g⋅∘C))(−63.8∘C)≈56.0 gm = \frac{q}{c \Delta T} = \frac{-1606.66\text{ J}}{(0.449\text{ J}/(\text{g}\cdot^\circ\text{C}))(-63.8^\circ\text{C})} \approx 56.0\text{ g}.

03

A 40.0 g40.0\text{ g} block of copper (c=0.385 J/(g⋅∘C)c = 0.385\text{ J}/(\text{g}\cdot^\circ\text{C})) at 100.0∘C100.0^\circ\text{C} and a 30.0 g30.0\text{ g} block of aluminum (c=0.897 J/(g⋅∘C)c = 0.897\text{ J}/(\text{g}\cdot^\circ\text{C})) at 80.0∘C80.0^\circ\text{C} are simultaneously dropped into 150.0 g150.0\text{ g} of water at 20.0∘C20.0^\circ\text{C}. Calculate the final thermal equilibrium temperature TfT_f.

Answer

Tf=23.8∘CT_f = 23.8^\circ\text{C}. Key steps: Set qCu+qAl+qwater=0q_{\text{Cu}} + q_{\text{Al}} + q_{\text{water}} = 0; (40.0)(0.385)(Tf−100)+(30.0)(0.897)(Tf−80)+(150.0)(4.184)(Tf−20)=0(40.0)(0.385)(T_f - 100) + (30.0)(0.897)(T_f - 80) + (150.0)(4.184)(T_f - 20) = 0; 15.4(Tf−100)+26.91(Tf−80)+627.6(Tf−20)=015.4(T_f - 100) + 26.91(T_f - 80) + 627.6(T_f - 20) = 0; 669.91Tf=16244.8  ⟹  Tf≈23.8∘C669.91 T_f = 16244.8 \implies T_f \approx 23.8^\circ\text{C}.

Loading workspace…