Resources

A student expects that doubling the Celsius temperature of a trapped gas sample inside a piston-cylinder apparatus at constant pressure will double its volume. The cylinder initially holds 1.50 L1.50\text{ L} of krypton gas at 25.0∘C25.0^\circ\text{C}. The gas is heated to 50.0∘C50.0^\circ\text{C} while the pressure is kept constant. Calculate the actual final volume of the gas in liters, and determine the percentage difference between the student's intuitive prediction (3.00 L3.00\text{ L}) and the true thermodynamic volume.

Answer and steps

Final answer

Actual volume=1.63 L\text{Actual volume} = 1.63\text{ L}; Percentage difference=84.0%\text{Percentage difference} = 84.0\%

Steps

01

Convert Temperatures to the Kelvin Scale

Charles's Law states that at constant pressure, the volume of a fixed mass of gas is directly proportional to its absolute temperature in kelvins (K\text{K}):

V1T1=V2T2\frac{V_1}{T_1} = \frac{V_2}{T_2}

Gas laws reflect the kinetic energy of particles, which is measured relative to absolute zero (0 K0\text{ K}), not 0∘C0^\circ\text{C}. Therefore, all temperatures must be converted to kelvins:

T1=25.0∘C+273.15=298.15 KT_1 = 25.0^\circ\text{C} + 273.15 = 298.15\text{ K}

T2=50.0∘C+273.15=323.15 KT_2 = 50.0^\circ\text{C} + 273.15 = 323.15\text{ K}

02

Calculate the Actual Final Volume

Rearrange Charles's Law to solve for the final volume V2V_2:

V2=V1⋅T2T1V_2 = V_1 \cdot \frac{T_2}{T_1}

Substitute the given values into the equation:

V2=1.50 L⋅323.15 K298.15 K≈1.6258 LV_2 = 1.50\text{ L} \cdot \frac{323.15\text{ K}}{298.15\text{ K}} \approx 1.6258\text{ L}

Rounding to three significant figures gives:

V2=1.63 LV_2 = 1.63\text{ L}

Common Pitfall: Doubling the temperature in degrees Celsius (from 25.0∘C25.0^\circ\text{C} to 50.0∘C50.0^\circ\text{C}) does not double the thermal energy of the gas particles. On the Kelvin scale, the temperature only increases by a factor of 323.15298.15≈1.084\frac{323.15}{298.15} \approx 1.084 (an 8.4%8.4\% increase), resulting in a modest volume expansion rather than doubling.

03

Calculate the Percentage Difference

The student predicted a final volume of Vpred=3.00 LV_{\text{pred}} = 3.00\text{ L}. Calculate the percentage difference relative to the true thermodynamic value (V2=1.63 LV_2 = 1.63\text{ L}):

Percentage difference=∣Vpred−V2∣V2⋅100%\text{Percentage difference} = \frac{|V_{\text{pred}} - V_2|}{V_2} \cdot 100\%

Percentage difference=3.00 L−1.63 L1.63 L⋅100%=1.37 L1.63 L⋅100%≈84.0%\text{Percentage difference} = \frac{3.00\text{ L} - 1.63\text{ L}}{1.63\text{ L}} \cdot 100\% = \frac{1.37\text{ L}}{1.63\text{ L}} \cdot 100\% \approx 84.0\%

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses Celsius temperatures directly in Charles's Law instead of converting to kelvins, yielding a final volume of 3.00 L and 0% difference.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    V1T1=V2T2\frac{V_1}{T_1} = \frac{V_2}{T_2}

  2. Step 2

    1.5025.0=V250.0  ⟹  V2=1.50×(50.025.0)=3.00 L\frac{1.50}{25.0} = \frac{V_2}{50.0} \implies V_2 = 1.50 \times \left(\frac{50.0}{25.0}\right) = 3.00\text{ L}

    Correct

    T1=25.0+273.15=298.15 KT_1 = 25.0 + 273.15 = 298.15\text{ K}, T2=50.0+273.15=323.15 K  ⟹  V2=1.50 L×(323.15 K298.15 K)≈1.63 LT_2 = 50.0 + 273.15 = 323.15\text{ K} \implies V_2 = 1.50\text{ L} \times \left(\frac{323.15\text{ K}}{298.15\text{ K}}\right) \approx 1.63\text{ L}

    Gas laws describe relationships based on thermal kinetic energy, which is directly proportional to absolute temperature in kelvins, not degrees Celsius. Using Celsius values directly led to an overstated volume expansion.

  3. Step 3

    Percentage difference=∣3.00−3.00∣3.00×100%=0%\text{Percentage difference} = \frac{|3.00 - 3.00|}{3.00} \times 100\% = 0\%

    Correct

    Percentage difference=∣3.00 L−1.63 L∣1.63 L×100%≈84.0%\text{Percentage difference} = \frac{|3.00\text{ L} - 1.63\text{ L}|}{1.63\text{ L}} \times 100\% \approx 84.0\%

    You set up the percentage difference formula logically, but because you plugged in your erroneous V2=3.00 LV_2 = 3.00\text{ L} from the previous step, your calculated difference evaluated to 0%0\%.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that constant pressure implies Charles's Law.

You correctly set up the ratio and solved algebraically for the unknown variable.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Celsius-to-Kelvin Conversion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the Celsius scale as an absolute scale where doubling the numerical value represents doubling the average kinetic energy of the gas molecules. Because the Celsius zero point is arbitrary relative to particle motion, gas law calculations must always be performed in kelvins.

REASONING PATH
Your ACEpath teacher’s suggested approach
Temperature Scale Check
  • All ideal gas law equations (PV=nRTPV=nRT, V1T1=V2T2\frac{V_1}{T_1}=\frac{V_2}{T_2}, etc.) require absolute temperature in kelvins (T\text{ (K)} = T\text{ (^\circ C)} + 273.15).

  • Convert every given Celsius temperature to kelvins before inserting numbers into gas law equations.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the temperatures to the Kelvin scale: T1=25.0+273.15=298.15 KT_1 = 25.0 + 273.15 = 298.15\text{ K} and T2=50.0+273.15=323.15 KT_2 = 50.0 + 273.15 = 323.15\text{ K}.

  2. Substitute the Kelvin temperatures into Charles's Law: V2=1.50 L×323.15 K298.15 K≈1.626 L≈1.63 LV_2 = 1.50\text{ L} \times \frac{323.15\text{ K}}{298.15\text{ K}} \approx 1.626\text{ L} \approx 1.63\text{ L}.

  3. Compute the percentage difference against the predicted value (3.00 L3.00\text{ L}): ∣3.00 L−1.63 L∣1.63 L×100%=1.37 L1.63 L×100%≈84.0%\frac{|3.00\text{ L} - 1.63\text{ L}|}{1.63\text{ L}} \times 100\% = \frac{1.37\text{ L}}{1.63\text{ L}} \times 100\% \approx 84.0\%.

Final answer

Actual volume = 1.63 L1.63\text{ L}; Percentage difference = 84.0%84.0\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Always add 273.15273.15 to Celsius temperatures as the very first step in any gas law problem.

  • Remember that doubling the Celsius value from 25∘C25^\circ\text{C} to 50∘C50^\circ\text{C} only increases absolute temperature from ≈298 K\approx 298\text{ K} to ≈323 K\approx 323\text{ K}, an increase of only about 8.4%8.4\%, not 100%100\%.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the temperature ratio when solving Charles's Law, calculating that the gas contracts upon heating.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    T1=25.0+273.15=298.15 K  ⟹  T2=50.0+273.15=323.15 KT_1 = 25.0 + 273.15 = 298.15\text{ K} \implies T_2 = 50.0 + 273.15 = 323.15\text{ K}

  2. Step 2

    V2=V1×(T1T2)  ⟹  V2=1.50×(298.15323.15)=1.38 LV_2 = V_1 \times \left(\frac{T_1}{T_2}\right) \implies V_2 = 1.50 \times \left(\frac{298.15}{323.15}\right) = 1.38\text{ L}

    Correct

    V2=V1×(T2T1)=1.50 L×(323.15 K298.15 K)≈1.63 LV_2 = V_1 \times \left(\frac{T_2}{T_1}\right) = 1.50\text{ L} \times \left(\frac{323.15\text{ K}}{298.15\text{ K}}\right) \approx 1.63\text{ L}

    From Charles's Law, V1T1=V2T2\frac{V_1}{T_1} = \frac{V_2}{T_2}, isolating V2V_2 gives V2=V1⋅T2T1V_2 = V_1 \cdot \frac{T_2}{T_1}. Because you inverted the ratio as T1T2\frac{T_1}{T_2}, your calculation showed the gas contracting upon heating instead of expanding.

  3. Step 3

    Percentage difference=∣3.00−1.38∣1.38×100%=1.621.38×100%=117%\text{Percentage difference} = \frac{|3.00 - 1.38|}{1.38} \times 100\% = \frac{1.62}{1.38} \times 100\% = 117\%

    Correct

    Percentage difference=∣3.00 L−1.63 L∣1.63 L×100%≈84.0%\text{Percentage difference} = \frac{|3.00\text{ L} - 1.63\text{ L}|}{1.63\text{ L}} \times 100\% \approx 84.0\%

    You used the standard percentage difference formula correctly, but your final numerical value was thrown off by the incorrect volume carried over from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that gas law calculations require temperatures expressed in kelvins.

You accurately converted both temperatures using T=T∘C+273.15T = T_{^\circ\text{C}} + 273.15.

You correctly set up the formula for percentage difference relative to the calculated value.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic rearrangement error (inverted ratio in Charles's Law)

You multiplied by T1T2\frac{T_1}{T_2} rather than T2T1\frac{T_2}{T_1} when solving for V2V_2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You did not cross-multiply or check the physical reality of the proportional relationship: since volume is directly proportional to absolute temperature, an increase in temperature must yield an expansion factor greater than 11.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolate Variables Using Cross-Multiplication
  • For direct proportions V1T1=V2T2\frac{V_1}{T_1} = \frac{V_2}{T_2}, cross-multiplication gives V1T2=V2T1V_1 T_2 = V_2 T_1.

  • Divide both sides by T1T_1 to isolate V2=V1(T2T1)V_2 = V_1 \left(\frac{T_2}{T_1}\right).

Physical Sanity Check
  • At constant pressure, heating a gas causes it to expand (V2>V1V_2 > V_1), whereas cooling causes it to contract (V2<V1V_2 < V_1).

  • Before moving on, verify whether your multiplier ratio T2T1\frac{T_2}{T_1} is greater than 11 when heating or less than 11 when cooling.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Solve Charles's Law for V2V_2: V2=V1⋅T2T1=1.50 L⋅323.15 K298.15 K=1.6258 L≈1.63 LV_2 = V_1 \cdot \frac{T_2}{T_1} = 1.50\text{ L} \cdot \frac{323.15\text{ K}}{298.15\text{ K}} = 1.6258\text{ L} \approx 1.63\text{ L}.

  2. Substitute the correct actual volume into the percentage difference formula: Percentage difference=∣3.00 L−1.63 L∣1.63 L×100%\text{Percentage difference} = \frac{|3.00\text{ L} - 1.63\text{ L}|}{1.63\text{ L}} \times 100\%.

  3. Evaluate the numerator and quotient: 1.37 L1.63 L×100%≈84.0%\frac{1.37\text{ L}}{1.63\text{ L}} \times 100\% \approx 84.0\%.

Final answer

Actual volume = 1.63 L1.63\text{ L}; Percentage difference = 84.0%84.0\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the cross-multiplication step V1T2=V2T1V_1 T_2 = V_2 T_1 to avoid flipping ratios when rearranging gas laws.

  • Perform a quick physical check: if temperature increases, your volume multiplier must be greater than 11.

OverviewACEpath Teacher's Diagnosis

03 The student subtracts 273.15 instead of adding it when converting temperatures from Celsius to Kelvin.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    T1=25.0−273.15=−248.15 K  ⟹  T2=50.0−273.15=−223.15 KT_1 = 25.0 - 273.15 = -248.15\text{ K} \implies T_2 = 50.0 - 273.15 = -223.15\text{ K}

    Correct

    T1=25.0+273.15=298.15 K  ⟹  T2=50.0+273.15=323.15 KT_1 = 25.0 + 273.15 = 298.15\text{ K} \implies T_2 = 50.0 + 273.15 = 323.15\text{ K}

    To convert from degrees Celsius to kelvins, you must add 273.15273.15 because absolute zero (0 K0\text{ K}) corresponds to −273.15∘C-273.15^\circ\text{C}.

  2. Step 2

    V2=1.50×(−223.15−248.15)=1.35 LV_2 = 1.50 \times \left(\frac{-223.15}{-248.15}\right) = 1.35\text{ L}

    Correct

    V2=1.50 L×(323.15 K298.15 K)≈1.63 LV_2 = 1.50\text{ L} \times \left(\frac{323.15\text{ K}}{298.15\text{ K}}\right) \approx 1.63\text{ L}

    Your algebraic setup for Charles's Law (V2=V1⋅T2T1V_2 = V_1 \cdot \frac{T_2}{T_1}) was correct, but substituting the negative temperature values caused the volume to decrease instead of expanding.

  3. Step 3

    Percentage difference=∣3.00−1.35∣1.35×100%  ⟹  =1.651.35×100%=122%\text{Percentage difference} = \frac{|3.00 - 1.35|}{1.35} \times 100\% \implies = \frac{1.65}{1.35} \times 100\% = 122\%

    Correct

    Percentage difference=∣3.00−1.63 L∣1.63 L×100%≈84.0%\text{Percentage difference} = \frac{|3.00 - 1.63\text{ L}|}{1.63\text{ L}} \times 100\% \approx 84.0\%

    You structured the percentage difference calculation accurately, but the result was skewed by your downstream volume error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that Charles's Law governs gas expansion at constant pressure.

You set up the ratio V2=V1⋅T2T1V_2 = V_1 \cdot \frac{T_2}{T_1} in the proper proportion.

You applied the relative percentage difference formula correctly using your computed volume.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign Error in Temperature Scale Conversion

You subtracted 273.15273.15 from the Celsius temperatures instead of adding 273.15273.15.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the conversion formula T(K)=T(∘C)+273.15T(\text{K}) = T(^\circ\text{C}) + 273.15 with the reverse conversion T(∘C)=T(K)−273.15T(^\circ\text{C}) = T(\text{K}) - 273.15, leading to impossible negative temperatures on the absolute Kelvin scale.

REASONING PATH
Your ACEpath teacher’s suggested approach
Absolute Zero Sanity Check
  • The Kelvin scale starts at absolute zero (0 K0\text{ K}); temperatures in kelvins cannot be negative in ideal gas calculations.

  • Always verify that T(K)>0 KT(\text{K}) > 0\text{ K}. If you obtain a negative value, you likely reversed the addition and subtraction.

Thermal Expansion Direction
  • According to Charles's Law, heating a gas at constant pressure must increase its volume (T2>T1  ⟹  V2>V1T_2 > T_1 \implies V_2 > V_1).

  • Check whether your calculated final volume makes physical sense relative to the initial volume before calculating differences.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the Celsius temperatures to kelvins by adding 273.15273.15: T1=25.0+273.15=298.15 KT_1 = 25.0 + 273.15 = 298.15\text{ K} and T2=50.0+273.15=323.15 KT_2 = 50.0 + 273.15 = 323.15\text{ K}.

  2. Apply Charles's Law to calculate the true final volume: V2=1.50 L⋅323.15 K298.15 K≈1.6258 L≈1.63 LV_2 = 1.50\text{ L} \cdot \frac{323.15\text{ K}}{298.15\text{ K}} \approx 1.6258\text{ L} \approx 1.63\text{ L}.

  3. Calculate the percentage difference between the student's prediction (3.00 L3.00\text{ L}) and the true volume: ∣3.00 L−1.63 L∣1.63 L×100%=1.37 L1.63 L×100%≈84.0%\frac{|3.00\text{ L} - 1.63\text{ L}|}{1.63\text{ L}} \times 100\% = \frac{1.37\text{ L}}{1.63\text{ L}} \times 100\% \approx 84.0\%.

Final answer

Actual volume=1.63 L\text{Actual volume} = 1.63\text{ L}; Percentage difference=84.0%\text{Percentage difference} = 84.0\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the conversion benchmark: water freezes at 0∘C=273.15 K0^\circ\text{C} = 273.15\text{ K} and boils at 100∘C=373.15 K100^\circ\text{C} = 373.15\text{ K}, meaning Kelvin values are always numerically larger than Celsius values.

  • Perform a quick qualitative sanity check on gas laws: heating at constant pressure must cause volume expansion, never contraction.

Lock it in

Similar question

01

A sample of neon gas occupies 2.40 L2.40\text{ L} at 20.0∘C20.0^\circ\text{C}. If the gas is heated to 80.0∘C80.0^\circ\text{C} at constant pressure, what is the final volume of the gas in liters?

Answer

2.89 L2.89\text{ L}. Convert temperatures: T1=20.0+273.15=293.15 KT_1 = 20.0 + 273.15 = 293.15\text{ K}, T2=80.0+273.15=353.15 KT_2 = 80.0 + 273.15 = 353.15\text{ K}. Apply Charles's Law: V2=2.40 L×353.15 K293.15 K≈2.89 LV_2 = 2.40\text{ L} \times \frac{353.15\text{ K}}{293.15\text{ K}} \approx 2.89\text{ L}.

02

To what temperature in degrees Celsius must an initial sample of 500 mL500\text{ mL} of helium at 10.0∘C10.0^\circ\text{C} be heated at constant pressure so that its volume truly doubles to 1000 mL1000\text{ mL}?

Answer

293∘C293^\circ\text{C} (or 293.3∘C293.3^\circ\text{C}). Convert initial temperature to kelvins: T1=10.0+273.15=283.15 KT_1 = 10.0 + 273.15 = 283.15\text{ K}. Doubling volume requires doubling the absolute temperature: T2=2×283.15 K=566.30 KT_2 = 2 \times 283.15\text{ K} = 566.30\text{ K}. Convert back to Celsius: 566.30−273.15≈293∘C566.30 - 273.15 \approx 293^\circ\text{C}.

03

A rigid, sealed canister holds nitrogen gas at 1.20 atm1.20\text{ atm} and 25.0∘C25.0^\circ\text{C}. A technician erroneously predicts that cooling the gas to −25.0∘C-25.0^\circ\text{C} will cause the pressure to become negative or zero. Calculate the true final pressure in atmospheres, and state why the technician's reasoning fails.

Answer

0.999 atm0.999\text{ atm}. Convert temperatures to kelvins: T1=298.15 KT_1 = 298.15\text{ K}, T2=−25.0+273.15=248.15 KT_2 = -25.0 + 273.15 = 248.15\text{ K}. Apply Gay-Lussac's Law: P2=1.20 atm×248.15 K298.15 K≈0.999 atmP_2 = 1.20\text{ atm} \times \frac{248.15\text{ K}}{298.15\text{ K}} \approx 0.999\text{ atm}. The technician's reasoning fails because 0∘C0^\circ\text{C} is not the absence of thermal energy; gas pressure only approaches zero as absolute temperature approaches 0 K0\text{ K}.

Loading workspace…