Resources

A deep-sea diving gas cylinder contains a mixture of oxygen (O2\text{O}_2) and helium (He\text{He}) with a total pressure of 18.5 atm18.5\text{ atm}. Chemical analysis determines that the partial pressure of oxygen is PO2=1.48 atmP_{\text{O}_2} = 1.48\text{ atm}. Calculate the mole fraction of helium (XHeX_{\text{He}}) and the percent by volume of helium in this breathing mixture.

Answer and steps

Final answer

XHe=0.920X_{\text{He}} = 0.920, Volume percent of He=92.0%\text{Volume percent of He} = 92.0\%

Steps

01

Find the partial pressure of helium (He\ce{He})

According to Dalton's Law of Partial Pressures, the total pressure of a non-reacting gas mixture is equal to the sum of the partial pressures of its individual component gases:

Ptotal=POX2+PHeP_{\text{total}} = P_{\ce{O2}} + P_{\ce{He}}

Substitute the given values into the equation to find PHeP_{\ce{He}}:

18.5 atm=1.48 atm+PHe18.5\text{ atm} = 1.48\text{ atm} + P_{\ce{He}}

PHe=18.5 atm−1.48 atm=17.02 atmP_{\ce{He}} = 18.5\text{ atm} - 1.48\text{ atm} = 17.02\text{ atm}


02

Calculate the mole fraction of helium (XHeX_{\ce{He}})

The partial pressure of any component gas is related to its mole fraction (XiX_i) and the total pressure by:

Pi=Xi⋅Ptotal  ⟹  Xi=PiPtotalP_i = X_i \cdot P_{\text{total}} \implies X_i = \frac{P_i}{P_{\text{total}}}

Using the values for helium:

XHe=PHePtotal=17.02 atm18.5 atm=0.920X_{\ce{He}} = \frac{P_{\ce{He}}}{P_{\text{total}}} = \frac{17.02\text{ atm}}{18.5\text{ atm}} = 0.920

(Alternative check: XOX2=1.48 atm18.5 atm=0.0800X_{\ce{O2}} = \frac{1.48\text{ atm}}{18.5\text{ atm}} = 0.0800, and XHe=1−0.0800=0.920X_{\ce{He}} = 1 - 0.0800 = 0.920.)


03

Determine the volume percent of helium

By Amagat's Law and Avogadro's principle for ideal gas mixtures at constant temperature and pressure, the volume fraction of a gas is equal to its mole fraction:

VHeVtotal=XHe=0.920\frac{V_{\ce{He}}}{V_{\text{total}}} = X_{\ce{He}} = 0.920

Convert the volume fraction to a percentage:

Volume percent of He=XHe⋅100%=0.920⋅100%=92.0%\text{Volume percent of He} = X_{\ce{He}} \cdot 100\% = 0.920 \cdot 100\% = 92.0\%

Common Pitfall: Volume percent and mole percent are identical for ideal gas mixtures, but they do not equal mass (weight) percent because helium and oxygen have substantially different molar masses (4.003 g/mol4.003\text{ g/mol} vs. 32.00 g/mol32.00\text{ g/mol}).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the mole fraction of oxygen instead of helium using the given partial pressure directly without subtracting from the total pressure.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    XHe=PO2Ptotal=0.080  ⟹  XHe=1.4818.5=0.080X_{\text{He}} = \frac{P_{\text{O}_2}}{P_{\text{total}}} = 0.080 \implies X_{\text{He}} = \frac{1.48}{18.5} = 0.080

    Correct

    PHe=Ptotal−PO2=18.5 atm−1.48 atm=17.02 atm  ⟹  XHe=PHePtotal=17.02 atm18.5 atm=0.920P_{\text{He}} = P_{\text{total}} - P_{\text{O}_2} = 18.5\text{ atm} - 1.48\text{ atm} = 17.02\text{ atm} \implies X_{\text{He}} = \frac{P_{\text{He}}}{P_{\text{total}}} = \frac{17.02\text{ atm}}{18.5\text{ atm}} = 0.920

    You set the ratio PO2Ptotal\frac{P_{\text{O}_2}}{P_{\text{total}}} equal to XHeX_{\text{He}}, but dividing the partial pressure of oxygen by the total pressure yields the mole fraction of oxygen (XO2X_{\text{O}_2}), not helium. To find XHeX_{\text{He}}, you first need to subtract PO2P_{\text{O}_2} from PtotalP_{\text{total}} to find PHeP_{\text{He}}, or compute XHe=1−XO2X_{\text{He}} = 1 - X_{\text{O}_2}.

  2. Step 2

    Volume %=0.080×100%=8.0%\text{Volume \%} = 0.080 \times 100\% = 8.0\%

    Correct

    Volume % of He=XHe×100%=0.920×100%=92.0%\text{Volume \% of He} = X_{\text{He}} \times 100\% = 0.920 \times 100\% = 92.0\%

    Your method of multiplying the mole fraction by 100%100\% to get the volume percent is completely correct, but the final percentage reflects oxygen because of the mismatched value from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the formula relating component partial pressure and total pressure to mole fraction.

You accurately converted a gas mole fraction into volume percent by multiplying by 100%100\%.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Component Subscript Mismatch in Dalton's Law

You accidentally substituted the given partial pressure of oxygen into the numerator when solving for the mole fraction of helium.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the given component (PO2P_{\text{O}_2}) with the target component (PHeP_{\text{He}}), leading to omitting Dalton's law of additive pressures (Ptotal=P1+P2P_{\text{total}} = P_1 + P_2) before setting up the mole fraction ratio.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Subscripts Carefully
  • For any gas component ii, Xi=PiPtotalX_i = \frac{P_i}{P_{\text{total}}}. The component in the numerator must always match the subscript of the mole fraction being calculated.

  • Before computing, write out the identity with matching labels: XHe=PHePtotalX_{\text{He}} = \frac{P_{\text{He}}}{P_{\text{total}}}.

Use Dalton's Law for Binary Mixtures
  • In a two-component mixture, Ptotal=PA+PBP_{\text{total}} = P_A + P_B and XA+XB=1X_A + X_B = 1.

  • If given PAP_A but asked for component BB, find PB=Ptotal−PAP_B = P_{\text{total}} - P_A or calculate XB=1−XAX_B = 1 - X_A.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the partial pressure of helium using Dalton's law: PHe=Ptotal−PO2=18.5 atm−1.48 atm=17.02 atmP_{\text{He}} = P_{\text{total}} - P_{\text{O}_2} = 18.5\text{ atm} - 1.48\text{ atm} = 17.02\text{ atm}.

  2. Calculate the mole fraction of helium: XHe=PHePtotal=17.02 atm18.5 atm=0.920X_{\text{He}} = \frac{P_{\text{He}}}{P_{\text{total}}} = \frac{17.02\text{ atm}}{18.5\text{ atm}} = 0.920.

  3. Convert the mole fraction of helium to volume percent: Volume %=XHe×100%=0.920×100%=92.0%\text{Volume \%} = X_{\text{He}} \times 100\% = 0.920 \times 100\% = 92.0\%.

Final answer

XHe=0.920X_{\text{He}} = 0.920, Volume percent of He=92.0%\text{Volume percent of He} = 92.0\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Review Dalton's law of partial pressures and practice labeling each gas component explicitly with subscripts.

  • Perform a quick sanity check on gas mixtures: deep-sea breathing mixtures (heliox) are predominantly helium, so its mole fraction should be close to 11, not small like 0.0800.080.

OverviewACEpath Teacher's Diagnosis

02 The student divides the partial pressure of helium by the partial pressure of oxygen rather than the total pressure when computing the mole fraction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    PHe=18.5−1.48=17.02 atmP_{\text{He}} = 18.5 - 1.48 = 17.02\text{ atm}

  2. Step 2

    XHe=17.02/1.48=11.5X_{\text{He}} = 17.02 / 1.48 = 11.5

    Correct

    XHe=PHePtotal=17.02 atm18.5 atm=0.920X_{\text{He}} = \frac{P_{\text{He}}}{P_{\text{total}}} = \frac{17.02\text{ atm}}{18.5\text{ atm}} = 0.920

    You divided the partial pressure of helium by the partial pressure of oxygen (1.48 atm1.48\text{ atm}) rather than dividing by the total pressure (18.5 atm18.5\text{ atm}). A mole fraction represents a part-to-whole ratio and must always be between 0 and 1.

  3. Step 3

    Volume %=11.5×100%=1150%\text{Volume \%} = 11.5 \times 100\% = 1150\%

    Correct

    Volume %=XHe×100%=0.920×100%=92.0%\text{Volume \%} = X_{\text{He}} \times 100\% = 0.920 \times 100\% = 92.0\%

    You correctly multiplied your mole fraction by 100%100\% to get the volume percentage, but the result was incorrect because it used the erroneous value from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the total pressure is the sum of the component partial pressures.

You calculated the partial pressure of helium correctly as 17.02 atm17.02\text{ atm}.

You recognized that the volume percent is obtained by multiplying the mole fraction by 100%100\%.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
part-to-part ratio instead of part-to-whole ratio for mole fraction

No, this was a conceptual confusion between comparing two components versus finding the fraction of the whole mixture.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You divided the component's partial pressure by the other gas's partial pressure (PHe/PO2P_{\text{He}} / P_{\text{O}_2}) instead of the total mixture pressure (PHe/PtotalP_{\text{He}} / P_{\text{total}}). Because a fraction describes a part of the whole system, the denominator must always be the total quantity.

REASONING PATH
Your ACEpath teacher’s suggested approach
Part-to-Whole Definition
  • Xi=nintotal=PiPtotalX_i = \frac{n_i}{n_{\text{total}}} = \frac{P_i}{P_{\text{total}}}

  • Always place the total pressure or total moles in the denominator, never another individual component.

Range Sanity Check
  • 0≤Xi≤10 \le X_i \le 1 and ∑Xi=1\sum X_i = 1

  • If a calculated mole fraction exceeds 1 (or a volume percent exceeds 100%100\%) in a real mixture, immediately stop and check your denominator.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the definition of mole fraction: XHe=PHePtotalX_{\text{He}} = \frac{P_{\text{He}}}{P_{\text{total}}}.

  2. Substitute the values: XHe=17.02 atm18.5 atm=0.920X_{\text{He}} = \frac{17.02\text{ atm}}{18.5\text{ atm}} = 0.920.

  3. Convert the mole fraction to volume percent: Volume %=0.920×100%=92.0%\text{Volume \%} = 0.920 \times 100\% = 92.0\%.

Final answer

XHe=0.920X_{\text{He}} = 0.920, Volume percent of He=92.0%\text{Volume percent of He} = 92.0\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Always double-check that every mole fraction you calculate falls strictly between 0 and 1.

  • Label denominators clearly with 'total' (e.g., write PtotalP_{\text{total}} explicitly) before substituting numbers.

OverviewACEpath Teacher's Diagnosis

03 The student attempts to use molar mass to convert partial pressures to grams before finding the mole fraction, mistakenly treating partial pressures as masses.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    PHe=18.5−1.48=17.02 atmP_{\text{He}} = 18.5 - 1.48 = 17.02\text{ atm}

  2. Step 2

    nHe=17.02/4.00=4.255 mol  ⟹  nO2=1.48/32.00=0.04625 mol  ⟹  ntotal=4.255+0.04625=4.301 moln_{\text{He}} = 17.02 / 4.00 = 4.255\text{ mol} \implies n_{\text{O}_2} = 1.48 / 32.00 = 0.04625\text{ mol} \implies n_{\text{total}} = 4.255 + 0.04625 = 4.301\text{ mol}

    Correct

    XHe=PHePtotal=17.02 atm18.5 atmX_{\text{He}} = \frac{P_{\text{He}}}{P_{\text{total}}} = \frac{17.02\text{ atm}}{18.5\text{ atm}}

    You divided partial pressures by molar masses (MHe=4.00 g/molM_{\text{He}} = 4.00\text{ g/mol} and MO2=32.00 g/molM_{\text{O}_2} = 32.00\text{ g/mol}) as if pressure were mass in grams. Because gas pressure is already directly proportional to the number of moles at constant temperature and volume (Pi∝niP_i \propto n_i), you do not need molar mass to calculate mole fractions.

  3. Step 3

    XHe=4.2554.301=0.989X_{\text{He}} = \frac{4.255}{4.301} = 0.989

    Correct

    XHe=17.02 atm18.5 atm=0.920X_{\text{He}} = \frac{17.02\text{ atm}}{18.5\text{ atm}} = 0.920

    Your ratio calculation follows logically from your calculated mole values, but the result is incorrect due to the misapplied molar mass division in Step 2.

  4. Step 4

    Volume %=0.989×100%=98.9%\text{Volume } \% = 0.989 \times 100\% = 98.9\%

    Correct

    Volume %=XHe×100%=0.920×100%=92.0%\text{Volume } \% = X_{\text{He}} \times 100\% = 0.920 \times 100\% = 92.0\%

    You correctly recognized that volume percent equals mole fraction multiplied by 100%100\%, but the numerical value is skewed by the earlier error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used Dalton's law of partial pressures to solve for the partial pressure of helium.

You correctly connected the mole fraction of an ideal gas to its volume percentage.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing gas partial pressure with mass

You divided partial pressures in atmospheres by molar mass in grams per mole.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated partial pressure as if it were a mass quantity (mm) rather than recognizing that for an ideal gas mixture sharing the same container volume and temperature, partial pressure is directly proportional to moles (Pi=niRTVP_i = \frac{n_i RT}{V}). Thus, the mole fraction is simply the pressure fraction: Xi=PiPtotalX_i = \frac{P_i}{P_{\text{total}}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Direct Pressure-to-Mole Proportionality
  • For any component in an ideal gas mixture: Xi=nintotal=PiPtotal=ViVtotalX_i = \frac{n_i}{n_{\text{total}}} = \frac{P_i}{P_{\text{total}}} = \frac{V_i}{V_{\text{total}}}.

  • Calculate the mole fraction directly by dividing the component's partial pressure by the total pressure without using molar mass.

When to Use Molar Mass
  • Molar mass (MM) is only required when converting between mass (mm) and moles (nn), or when calculating mass percent.

  • Check the units of your starting quantity. If it is already in pressure units (atm, kPa, bar, or mmHg), do not divide by molar mass.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the definition of mole fraction in terms of partial pressures: XHe=PHePtotalX_{\text{He}} = \frac{P_{\text{He}}}{P_{\text{total}}}.

  2. Substitute the partial pressure and total pressure: XHe=17.02 atm18.5 atm=0.920X_{\text{He}} = \frac{17.02\text{ atm}}{18.5\text{ atm}} = 0.920.

  3. Calculate volume percent by multiplying the mole fraction by 100%100\%: Volume %=0.920×100%=92.0%\text{Volume } \% = 0.920 \times 100\% = 92.0\%.

Final answer

XHe=0.920X_{\text{He}} = 0.920, Volume percent of He=92.0%\text{Volume percent of He} = 92.0\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the ideal gas relationship showing why pressure fraction equals mole fraction (Pi/Ptotal=ni/ntotalP_i / P_{\text{total}} = n_i / n_{\text{total}}).

  • Practice identifying whether a problem provides gas quantities as partial pressures, volumes, or masses before choosing formulas.

  • Solve the follow-up exercises to solidify finding mole fractions directly from partial pressures.

Lock it in

Similar question

01

A gas cylinder contains argon (Ar\text{Ar}) and neon (Ne\text{Ne}) at a total pressure of 5.00 atm5.00\text{ atm}. If the partial pressure of argon is 1.25 atm1.25\text{ atm}, calculate the mole fraction of neon (XNeX_{\text{Ne}}) and its volume percentage.

Answer

XNe=0.750X_{\text{Ne}} = 0.750, Volume percent of Ne=75.0%\text{Volume percent of Ne} = 75.0\%. Key steps: PNe=Ptotal−PAr=5.00 atm−1.25 atm=3.75 atmP_{\text{Ne}} = P_{\text{total}} - P_{\text{Ar}} = 5.00\text{ atm} - 1.25\text{ atm} = 3.75\text{ atm}. Then XNe=3.755.00=0.750X_{\text{Ne}} = \frac{3.75}{5.00} = 0.750, and Volume %=0.750×100%=75.0%\text{Volume \%} = 0.750 \times 100\% = 75.0\%.

02

A synthetic air sample at 1.00 atm1.00\text{ atm} total pressure consists of nitrogen, oxygen, and carbon dioxide. The partial pressure of nitrogen is 0.780 atm0.780\text{ atm} and the partial pressure of carbon dioxide is 0.010 atm0.010\text{ atm}. Find the mole fraction of oxygen (XO2X_{\text{O}_2}) and the percent by volume of oxygen.

Answer

XO2=0.210X_{\text{O}_2} = 0.210, Volume percent of O2=21.0%\text{Volume percent of O}_2 = 21.0\%. Key steps: By Dalton's law, PO2=Ptotal−PN2−PCO2=1.00−0.780−0.010=0.210 atmP_{\text{O}_2} = P_{\text{total}} - P_{\text{N}_2} - P_{\text{CO}_2} = 1.00 - 0.780 - 0.010 = 0.210\text{ atm}. Then XO2=0.210 atm1.00 atm=0.210X_{\text{O}_2} = \frac{0.210\text{ atm}}{1.00\text{ atm}} = 0.210, which equals 21.0%21.0\% by volume.

03

A diving tank holds a trimix mixture of O2\text{O}_2, He\text{He}, and N2\text{N}_2 with a total pressure of 200.0 bar200.0\text{ bar}. Chemical analysis indicates that the mole fraction of oxygen is XO2=0.160X_{\text{O}_2} = 0.160 and the partial pressure of nitrogen is PN2=48.0 barP_{\text{N}_2} = 48.0\text{ bar}. Determine the partial pressure of helium (PHeP_{\text{He}}) and the percent by volume of helium in the tank.

Answer

PHe=120.0 barP_{\text{He}} = 120.0\text{ bar}, Volume percent of He=60.0%\text{Volume percent of He} = 60.0\%. Key steps: Find PO2=XO2×Ptotal=0.160×200.0 bar=32.0 barP_{\text{O}_2} = X_{\text{O}_2} \times P_{\text{total}} = 0.160 \times 200.0\text{ bar} = 32.0\text{ bar}. By Dalton's law, PHe=200.0−32.0−48.0=120.0 barP_{\text{He}} = 200.0 - 32.0 - 48.0 = 120.0\text{ bar}. Finally, XHe=120.0200.0=0.600X_{\text{He}} = \frac{120.0}{200.0} = 0.600, corresponding to 60.0%60.0\% by volume.

Loading workspace…