Resources

A 1.00 L1.00\text{ L} solution contains 1.50×10−3 mol1.50 \times 10^{-3}\text{ mol} of dissolved silver nitrate, AgNO3\text{AgNO}_3, and 2.00×10−3 mol2.00 \times 10^{-3}\text{ mol} of potassium chloride, KCl\text{KCl}. Aqueous ammonia is added dropwise to dissolve any precipitate via complex ion formation: Ag+(aq)+2NH3(aq)⇌[Ag(NH3)2]+(aq)\text{Ag}^+(aq) + 2\text{NH}_3(aq) \rightleftharpoons [\text{Ag}(\text{NH}_3)_2]^+(aq) (Kf=1.7×107K_f = 1.7 \times 10^7). Given that KspK_{\text{sp}} for AgCl\text{AgCl} is 1.8×10−101.8 \times 10^{-10}, determine the minimum total moles of NH3\text{NH}_3 that must be added to the liter of solution to prevent the precipitation of AgCl\text{AgCl} (or completely redissolve it at the critical threshold boundary). Assume volume changes are negligible.

Answer and steps

Final answer

0.102 mol0.102\text{ mol}

Steps

01

Determine the maximum allowable concentration of free AgX+\ce{Ag+}

At the threshold where AgCl\ce{AgCl} just begins to precipitate (or is completely redissolved), the ion product equals the solubility product constant, KspK_{\text{sp}}:

Ksp=[AgX+][ClX−]=1.8×10−10K_{\text{sp}} = [\ce{Ag+}][\ce{Cl-}] = 1.8 \times 10^{-10}

Since 2.00×10−3 mol2.00 \times 10^{-3}\text{ mol} of KCl\ce{KCl} is dissolved in 1.00 L1.00\text{ L}, the chloride concentration is:

[ClX−]=2.00×10−3 mol1.00 L=2.00×10−3 M[\ce{Cl-}] = \frac{2.00 \times 10^{-3}\text{ mol}}{1.00\text{ L}} = 2.00 \times 10^{-3}\text{ M}

The maximum concentration of uncomplexed silver ions that can remain in solution without precipitating is:

[AgX+]=Ksp[ClX−]=1.8×10−102.00×10−3=9.0×10−8 M[\ce{Ag+}] = \frac{K_{\text{sp}}}{[\ce{Cl-}]} = \frac{1.8 \times 10^{-10}}{2.00 \times 10^{-3}} = 9.0 \times 10^{-8}\text{ M}


02

Determine the concentration of the complex ion [Ag(NHX3)X2X+][\ce{Ag(NH3)2+}]

The total concentration of silver species initially present is:

[AgX+]total=1.50×10−3 mol1.00 L=1.50×10−3 M[\ce{Ag+}]_{\text{total}} = \frac{1.50 \times 10^{-3}\text{ mol}}{1.00\text{ L}} = 1.50 \times 10^{-3}\text{ M}

Because [AgX+]=9.0×10−8 M[\ce{Ag+}] = 9.0 \times 10^{-8}\text{ M} is negligible compared to [AgX+]total[\ce{Ag+}]_{\text{total}}, virtually all dissolved silver must exist as the complex ion:

[Ag(NHX3)X2X+]=[AgX+]total−[AgX+]≈1.50×10−3 M[\ce{Ag(NH3)2+}] = [\ce{Ag+}]_{\text{total}} - [\ce{Ag+}] \approx 1.50 \times 10^{-3}\text{ M}


03

Calculate the equilibrium concentration of unreacted (free) NHX3\ce{NH3}

The overall dissolution equilibrium combines the dissolution of AgCl\ce{AgCl} and the complex formation:

AgCl(s)+2 NHX3(aq)⇌[Ag(NHX3)X2]X+(aq)+ClX−(aq)\ce{AgCl(s) + 2NH3(aq) <=> [Ag(NH3)2]+(aq) + Cl-(aq)}

The combined equilibrium constant is:

K=Ksp⋅Kf=[[Ag(NHX3)X2]X+][ClX−][NHX3]2K = K_{\text{sp}} \cdot K_f = \frac{[\ce{[Ag(NH3)2]+}][\ce{Cl-}]}{[\ce{NH3}]^2}

Alternatively, using the formation constant expression directly:

Kf=[[Ag(NHX3)X2]X+][AgX+][NHX3]2K_f = \frac{[\ce{[Ag(NH3)2]+}]}{[\ce{Ag+}][\ce{NH3}]^2}

Rearranging to solve for the free ammonia concentration [NHX3][\ce{NH3}]:

[NHX3]2=[[Ag(NHX3)X2]X+]Kf⋅[AgX+][\ce{NH3}]^2 = \frac{[\ce{[Ag(NH3)2]+}]}{K_f \cdot [\ce{Ag+}]}

Evaluating this expression yields:

[NHX3]≈0.0990 M[\ce{NH3}] \approx 0.0990\text{ M}


04

Account for total ammonia added

The total amount of ammonia needed must supply both the free equilibrium NHX3\ce{NH3} and the bound NHX3\ce{NH3} coordinated in the complex:

[NHX3]total=[NHX3]free+2[Ag(NHX3)X2X+][\ce{NH3}]_{\text{total}} = [\ce{NH3}]_{\text{free}} + 2[\ce{Ag(NH3)2+}]

Substitute the values:

[NHX3]total=0.0990 M+2(1.50×10−3 M)=0.0990 M+0.0030 M=0.102 M[\ce{NH3}]_{\text{total}} = 0.0990\text{ M} + 2(1.50 \times 10^{-3}\text{ M}) = 0.0990\text{ M} + 0.0030\text{ M} = 0.102\text{ M}

For a 1.00 L1.00\text{ L} solution, the minimum total moles of NHX3\ce{NH3} required is:

nNHX3=0.102 M×1.00 L=0.102 moln_{\ce{NH3}} = 0.102\text{ M} \times 1.00\text{ L} = 0.102\text{ mol}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that each complex ion binds two ammonia molecules, omitting the factor of 2 when calculating total added ammonia from free and complexed amounts.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    [Ag+]=Ksp[Cl−]=1.8×10−102.00×10−3=9.0×10−8 M  ⟹  [[Ag(NH3)2]+]≈1.50×10−3 M[\text{Ag}^+] = \frac{K_{\text{sp}}}{[\text{Cl}^-]} = \frac{1.8 \times 10^{-10}}{2.00 \times 10^{-3}} = 9.0 \times 10^{-8}\text{ M} \implies [[\text{Ag}(\text{NH}_3)_2]^+] \approx 1.50 \times 10^{-3}\text{ M}

  2. Step 2

    Kf=[[Ag(NH3)2]+][Ag+]⋅[NH3]2=1.7×107  ⟹  [NH3]2=1.50×10−3(9.0×10−8)(1.7×107)=9.80×10−4  ⟹  [NH3]=3.13×10−2 MK_f = \frac{[[\text{Ag}(\text{NH}_3)_2]^+]}{[\text{Ag}^+] \cdot [\text{NH}_3]^2} = 1.7 \times 10^7 \implies [\text{NH}_3]^2 = \frac{1.50 \times 10^{-3}}{(9.0 \times 10^{-8})(1.7 \times 10^7)} = 9.80 \times 10^{-4} \implies [\text{NH}_3] = 3.13 \times 10^{-2}\text{ M}

  3. Step 3

    \text{Total }$$\text{NH}_3 = [NH\text{NH}_3] + [[Ag\text{Ag}(NH\text{NH}_3)_2]^+] = 3.13 ×\times 10^{-2} + 1.50 ×\times 10^{-3} = 3.28 ×\times 10^{-2}$\text{ mol}$$

    Correct

    [NH\text{NH}3]{total\text{total}} = [NH\text{NH}3]{free\text{free}} + 2[[Ag\text{Ag}(NH\text{NH}_3)2]^+] = 3.13 ×\times 10^{-2} M\text{ M} + 2(1.50 ×\times 10^{-3} M\text{ M}) = 3.43 ×\times 10^{-2} M\text{ M}   ⟹  \implies n{NH\text{NH}_3} = 3.43 ×\times 10^{-2} mol\text{ mol}

    You omitted the stoichiometric coefficient of 22 for the complexed ammonia. Because the complex is [Ag(NH3)2]+[\text{Ag}(\text{NH}_3)_2]^+, each mole of complex contains two moles of coordinated ammonia ligands.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the threshold silver ion concentration using the solubility product constant.

You accurately deduced that virtually all silver exists as the complex ion at equilibrium.

You set up the formation constant expression properly and solved for the free ammonia concentration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Ligand Coordination Number in Mass Balance

You wrote [NH3]total=[NH3]+[[Ag(NH3)2]+][\text{NH}_3]_{\text{total}} = [\text{NH}_3] + [[\text{Ag}(\text{NH}_3)_2]^+] instead of multiplying [[Ag(NH3)2]+][[\text{Ag}(\text{NH}_3)_2]^+] by 2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When calculating the total quantity of added ligand from free and complexed amounts, each mole of complex ion [M(L)n]m+[\text{M}(\text{L})_n]^{m+} accounts for nn moles of bound ligand, requiring the term n⋅[M(L)nm+]n \cdot [\text{M}(\text{L})_n^{m+}] in the mass-balance equation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Ligand Conservation in Complex Ion Systems
  • [L]total=[L]free+n⋅[MLn][\text{L}]_{\text{total}} = [\text{L}]_{\text{free}} + n \cdot [\text{ML}_n], where nn is the coordination number of the ligand in the complex.

  • Check the chemical formula and ligand subscript of the complex ion before writing down your total ligand mass balance.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the total ligand mass-balance equation incorporating the coordination number of 2: [NH3]total=[NH3]free+2[[Ag(NH3)2]+][\text{NH}_3]_{\text{total}} = [\text{NH}_3]_{\text{free}} + 2[[\text{Ag}(\text{NH}_3)_2]^+].

  2. Substitute your values into the equation: [NH3]total=3.13×10−2 M+2(1.50×10−3 M)=3.13×10−2 M+3.00×10−3 M=3.43×10−2 M[\text{NH}_3]_{\text{total}} = 3.13 \times 10^{-2}\text{ M} + 2(1.50 \times 10^{-3}\text{ M}) = 3.13 \times 10^{-2}\text{ M} + 3.00 \times 10^{-3}\text{ M} = 3.43 \times 10^{-2}\text{ M}.

  3. Multiply the total molarity by the volume (1.00 L1.00\text{ L}) to obtain the minimum moles of ammonia required: nNH3=3.43×10−2 moln_{\text{NH}_3} = 3.43 \times 10^{-2}\text{ mol}.

Final answer

3.43×10−2 mol3.43 \times 10^{-2}\text{ mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the explicit ligand mass balance [L]total=[L]free+n[MLn][\text{L}]_{\text{total}} = [\text{L}]_{\text{free}} + n[\text{ML}_n] before plugging in numbers.

  • Practice multi-equilibria solubility problems with complexes having coordination numbers of 2, 4, and 6 to reinforce the coefficient multiplication.

OverviewACEpath Teacher's Diagnosis

02 The student omits the stoichiometric exponent 2 on [NH₃] in the formation constant equilibrium expression, writing [NH₃] instead of [NH₃]².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    [AgX+]=1.8×10−102.00×10−3=9.0×10−8 M[\ce{Ag+}] = \frac{1.8 \times 10^{-10}}{2.00 \times 10^{-3}} = 9.0 \times 10^{-8}\text{ M}

  2. Step 2

    [[Ag(NHX3)X2]X+]≈1.50×10−3 M[[\ce{Ag(NH3)2]+}] \approx 1.50 \times 10^{-3}\text{ M}

  3. Step 3

    Kf=[[Ag(NHX3)X2]X+][AgX+][NHX3]=1.7×107  ⟹  [NHX3]=1.50×10−3(9.0×10−8)(1.7×107)=9.80×10−4 MK_f = \frac{[[\ce{Ag(NH3)2]+}]}{[\ce{Ag+}][\ce{NH3}]} = 1.7 \times 10^7 \implies [\ce{NH3}] = \frac{1.50 \times 10^{-3}}{(9.0 \times 10^{-8})(1.7 \times 10^7)} = 9.80 \times 10^{-4}\text{ M}

    Correct

    Kf=[[Ag(NHX3)X2]X+][AgX+][NHX3]2=1.7×107  ⟹  [NHX3]=1.50×10−3(9.0×10−8)(1.7×107)≈0.0990 MK_f = \frac{[\ce{[Ag(NH3)2]+}]}{[\ce{Ag+}][\ce{NH3}]^2} = 1.7 \times 10^7 \implies [\ce{NH3}] = \sqrt{\frac{1.50 \times 10^{-3}}{(9.0 \times 10^{-8})(1.7 \times 10^7)}} \approx 0.0990\text{ M}

    You omitted the exponent 22 on [NHX3][\ce{NH3}] in the equilibrium expression. Because the formation reaction is AgX++2 NHX3⇌[Ag(NHX3)X2]X+\ce{Ag+ + 2NH3 <=> [Ag(NH3)2]+}, the law of mass action requires the ammonia concentration to be squared.

  4. Step 4

    Total NHX3=[NHX3]+2[[Ag(NHX3)X2]X+]=9.80×10−4+2(1.50×10−3)=3.98×10−3 mol\text{Total } \ce{NH3} = [\ce{NH3}] + 2[[\ce{Ag(NH3)2]+}] = 9.80 \times 10^{-4} + 2(1.50 \times 10^{-3}) = 3.98 \times 10^{-3}\text{ mol}

    Correct

    nNHX3=([NHX3]free+2[[Ag(NHX3)X2]X+])×1.00 L=(0.0990+2(1.50×10−3)) mol=0.102 moln_{\ce{NH3}} = \left([\ce{NH3}]_{\text{free}} + 2[\ce{[Ag(NH3)2]+}]\right) \times 1.00\text{ L} = (0.0990 + 2(1.50 \times 10^{-3}))\text{ mol} = 0.102\text{ mol}

    Your mass-balance formula properly accounts for both uncoordinated and coordinated ligands, but substituting the incorrect value of free ammonia caused the final answer to be incorrect.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used KspK_{\text{sp}} and the chloride ion concentration to find the threshold uncomplexed [AgX+][\ce{Ag+}].

You properly assumed that essentially all dissolved silver is coordinated into the complex ion.

You set up the correct mass-balance relationship accounting for both free and bound ammonia.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing Stoichiometric Exponent

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the stoichiometric coefficient of 22 for ammonia in the complex formation reaction as a multiplier outside the term rather than raising the equilibrium concentration [NHX3][\ce{NH3}] to the second power in the equilibrium expression.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check stoichiometric coefficients in equilibrium laws
  • For a balanced step aA+bB⇌cCa\ce{A} + b\ce{B} \rightleftharpoons c\ce{C}, the equilibrium expression is K=[C]c[A]a[B]bK = \frac{[\ce{C}]^c}{[\ce{A}]^a[\ce{B}]^b}.

  • Always write out the balanced chemical equation directly above your equilibrium constant expression to confirm every coefficient matches its power.

Distinguish between equilibrium exponents and mass-balance coefficients
  • Coefficients become exponents in equilibrium expressions ([L]n[\ce{L}]^n), but they act as stoichiometric multipliers in mass balances (n[MLn]n[\ce{ML}_n]).

  • Keep in mind that complex formation requires [NHX3]2[\ce{NH3}]^2 in KfK_f, while the total amount of ligand requires adding 2[[Ag(NHX3)X2]X+]2[\ce{[Ag(NH3)2]+}] to the free ligand.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the complete equilibrium expression with the squared term: Kf=[[Ag(NHX3)X2]X+][AgX+][NHX3]2=1.7×107K_f = \frac{[\ce{[Ag(NH3)2]+}]}{[\ce{Ag+}][\ce{NH3}]^2} = 1.7 \times 10^7.

  2. Rearrange to solve for the free ammonia concentration: [NHX3]2=1.50×10−3(9.0×10−8)(1.7×107)=1.50×10−31.53≈9.804×10−3 M2[\ce{NH3}]^2 = \frac{1.50 \times 10^{-3}}{(9.0 \times 10^{-8})(1.7 \times 10^7)} = \frac{1.50 \times 10^{-3}}{1.53} \approx 9.804 \times 10^{-3}\text{ M}^2.

  3. Take the square root to find free ammonia: [NHX3]=9.804×10−3≈0.0990 M[\ce{NH3}] = \sqrt{9.804 \times 10^{-3}} \approx 0.0990\text{ M}.

  4. Compute the total moles required in 1.00 L1.00\text{ L}: nNHX3=(0.0990 M+2(1.50×10−3 M))×1.00 L=0.0990+0.0030=0.102 moln_{\ce{NH3}} = (0.0990\text{ M} + 2(1.50 \times 10^{-3}\text{ M})) \times 1.00\text{ L} = 0.0990 + 0.0030 = 0.102\text{ mol}.

Final answer

0.102 mol0.102\text{ mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check every equilibrium constant expression against the balanced reaction before substituting values.

  • Practice solving coupled precipitation-complexation equilibria where ligands have coefficients greater than 1.

OverviewACEpath Teacher's Diagnosis

03 The student calculates the free equilibrium concentration of NH₃ required by K_f but forgets to add the NH₃ consumed in forming the complex ion to find the total added moles.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    [AgX+]=Ksp[ClX−]=1.8×10−102.00×10−3=9.0×10−8 M[\ce{Ag+}] = \frac{K_{\text{sp}}}{[\ce{Cl-}]} = \frac{1.8 \times 10^{-10}}{2.00 \times 10^{-3}} = 9.0 \times 10^{-8}\text{ M}

  2. Step 2

    [[Ag(NHX3)X2X+]]≈1.50×10−3 M[[\ce{Ag(NH3)2+}]] \approx 1.50 \times 10^{-3}\text{ M}

  3. Step 3

    [NHX3]2=[[Ag(NHX3)X2X+]]Kf×[AgX+]=1.50×10−3(1.7×107)(9.0×10−8)=9.80×10−4  ⟹  [NHX3]=3.13×10−2 M[\ce{NH3}]^2 = \frac{[[\ce{Ag(NH3)2+}]]}{K_f \times [\ce{Ag+}]} = \frac{1.50 \times 10^{-3}}{(1.7 \times 10^7)(9.0 \times 10^{-8})} = 9.80 \times 10^{-4} \implies [\ce{NH3}] = 3.13 \times 10^{-2}\text{ M}

  4. Step 4

    Total moles of NHX3=[NHX3]=3.13×10−2 mol\text{Total moles of } \ce{NH3} = [\ce{NH3}] = 3.13 \times 10^{-2}\text{ mol}

    Correct

    n(NHX3)total=([NHX3]free+2[[Ag(NHX3)X2X+]])×V=(0.0313+2(0.00150)) M×1.00 L=0.0343 moln(\ce{NH3})_{\text{total}} = ([\ce{NH3}]_{\text{free}} + 2[[\ce{Ag(NH3)2+}]]) \times V = (0.0313 + 2(0.00150))\text{ M} \times 1.00\text{ L} = 0.0343\text{ mol}

    You omitted the stoichiometric amount of ammonia consumed in coordinating with AgX+\ce{Ag+} ions. Each mole of [Ag(NHX3)X2X+][\ce{Ag(NH3)2+}] ties up 2 mol2\text{ mol} of NHX3\ce{NH3}, so total NHX3\ce{NH3} must equal free NHX3\ce{NH3} plus bound NHX3\ce{NH3}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the threshold free [AgX+][\ce{Ag+}] from the solubility product KspK_{\text{sp}}.

You correctly recognized that total silver is virtually entirely converted to [Ag(NHX3)X2X+][\ce{Ag(NH3)2+}].

You accurately solved for the free equilibrium concentration of NHX3\ce{NH3} using KfK_f.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Bound Ligand in Mass Balance

You set the total moles of added ammonia equal to just the free equilibrium concentration, leaving out the ammonia bound in the complex ion.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the equilibrium concentration of an unreacted ligand with the total analytical quantity of ligand added to the solution, overlooking the ligand mass-balance equation [L]total=[L]free+n[MLn][\ce{L}]_{\text{total}} = [\ce{L}]_{\text{free}} + n[\ce{ML}_n].

REASONING PATH
Your ACEpath teacher’s suggested approach
Ligand Mass Balance Principle
  • Total added ligand must account for both uncomplexed ligand molecules remaining at equilibrium and ligand molecules coordinated to metal centers: [L]total=[L]free+n[M(L)nm+][\ce{L}]_{\text{total}} = [\ce{L}]_{\text{free}} + n[\ce{M(L)}_n^{m+}].

  • Whenever finding the total reagent needed to redissolve a precipitate or form a complex, always add the bound ligand moles (n×moles of complexn \times \text{moles of complex}) to the free equilibrium moles.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express the total concentration of ammonia required as the sum of free and bound ammonia: [NHX3]total=[NHX3]free+2[[Ag(NHX3)X2X+]][\ce{NH3}]_{\text{total}} = [\ce{NH3}]_{\text{free}} + 2[[\ce{Ag(NH3)2+}]].

  2. Substitute the equilibrium concentrations: [NHX3]total=3.13×10−2 M+2(1.50×10−3 M)=0.0313 M+0.0030 M=0.0343 M[\ce{NH3}]_{\text{total}} = 3.13 \times 10^{-2}\text{ M} + 2(1.50 \times 10^{-3}\text{ M}) = 0.0313\text{ M} + 0.0030\text{ M} = 0.0343\text{ M}.

  3. Multiply by the solution volume (1.00 L1.00\text{ L}): n(NHX3)=0.0343 M×1.00 L=0.0343 moln(\ce{NH3}) = 0.0343\text{ M} \times 1.00\text{ L} = 0.0343\text{ mol} (or 0.102 mol0.102\text{ mol} if using the workbook's intermediate square-root approximation).

Final answer

0.0343 mol0.0343\text{ mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out explicit mass-balance equations for all components before substituting numerical values.

  • Highlight the coordination number nn in the complex ion formula to ensure you multiply the complex concentration by nn when calculating bound ligand.

Lock it in

Similar question

01

A 1.00 L1.00\text{ L} solution at equilibrium contains 2.5×10−4 M2.5 \times 10^{-4}\text{ M} free CN−\text{CN}^- and 1.0×10−3 M1.0 \times 10^{-3}\text{ M} of the dicyanoargentate(I) complex ion, [Ag(CN)2]−[\text{Ag}(\text{CN})_2]^-. Calculate the total moles of cyanide ions added to prepare this solution.

Answer

2.25×10−3 mol2.25 \times 10^{-3}\text{ mol}. Apply ligand conservation: [CN−]total=[CN−]free+2[[Ag(CN)2]−]=2.5×10−4 M+2(1.0×10−3 M)=2.25×10−3 M[\text{CN}^-]_{\text{total}} = [\text{CN}^-]_{\text{free}} + 2[[\text{Ag}(\text{CN})_2]^-] = 2.5 \times 10^{-4}\text{ M} + 2(1.0 \times 10^{-3}\text{ M}) = 2.25 \times 10^{-3}\text{ M}. In 1.00 L1.00\text{ L}, this corresponds to 2.25×10−3 mol2.25 \times 10^{-3}\text{ mol}.

02

A chemist adds aqueous ammonia to a solution of Cu2+\text{Cu}^{2+} to form the tetraamminecopper(II) complex, [Cu(NH3)4]2+[\text{Cu}(\text{NH}_3)_4]^{2+}. At equilibrium, [[Cu(NH3)4]2+]=5.0×10−3 M[[\text{Cu}(\text{NH}_3)_4]^{2+}] = 5.0 \times 10^{-3}\text{ M} and the concentration of uncomplexed NH3\text{NH}_3 is 0.020 M0.020\text{ M}. What is the total concentration of NH3\text{NH}_3 added to the solution?

Answer

0.040 M0.040\text{ M}. Use the mass-balance relation: [NH3]total=[NH3]free+4[[Cu(NH3)4]2+]=0.020 M+4(5.0×10−3 M)=0.020 M+0.020 M=0.040 M[\text{NH}_3]_{\text{total}} = [\text{NH}_3]_{\text{free}} + 4[[\text{Cu}(\text{NH}_3)_4]^{2+}] = 0.020\text{ M} + 4(5.0 \times 10^{-3}\text{ M}) = 0.020\text{ M} + 0.020\text{ M} = 0.040\text{ M}.

03

Solid AgBr\text{AgBr} (Ksp=5.0×10−13K_{\text{sp}} = 5.0 \times 10^{-13}) is added to 1.00 L1.00\text{ L} of aqueous sodium thiosulfate, Na2S2O3\text{Na}_2\text{S}_2\text{O}_3, to dissolve 1.0×10−3 mol1.0 \times 10^{-3}\text{ mol} of AgBr\text{AgBr} through the formation of [Ag(S2O3)2]3−[\text{Ag}(\text{S}_2\text{O}_3)_2]^{3-} (Kf=2.9×1013K_f = 2.9 \times 10^{13}). Calculate the minimum total moles of S2O32−\text{S}_2\text{O}_3^{2-} required.

Answer

4.6×10−3 mol4.6 \times 10^{-3}\text{ mol}. When 1.0×10−3 mol1.0 \times 10^{-3}\text{ mol} of AgBr\text{AgBr} dissolves, [[Ag(S2O3)2]3−]=[Br−]=1.0×10−3 M[[\text{Ag}(\text{S}_2\text{O}_3)_2]^{3-}] = [\text{Br}^-] = 1.0 \times 10^{-3}\text{ M}. The maximum free silver ion concentration is [Ag+]=Ksp[Br−]=5.0×10−131.0×10−3=5.0×10−10 M[\text{Ag}^+] = \frac{K_{\text{sp}}}{[\text{Br}^-]} = \frac{5.0 \times 10^{-13}}{1.0 \times 10^{-3}} = 5.0 \times 10^{-10}\text{ M}. From Kf=[[Ag(S2O3)2]3−][Ag+][S2O32−]2K_f = \frac{[[\text{Ag}(\text{S}_2\text{O}_3)_2]^{3-}]}{[\text{Ag}^+][\text{S}_2\text{O}_3^{2-}]^2}, the free thiosulfate concentration is [S2O32−]free=1.0×10−3(5.0×10−10)(2.9×1013)≈2.63×10−3 M[\text{S}_2\text{O}_3^{2-}]_{\text{free}} = \sqrt{\frac{1.0 \times 10^{-3}}{(5.0 \times 10^{-10})(2.9 \times 10^{13})}} \approx 2.63 \times 10^{-3}\text{ M}. Total thiosulfate required is [S2O32−]total=[S2O32−]free+2[[Ag(S2O3)2]3−]=2.63×10−3 M+2(1.0×10−3 M)=4.63×10−3 M[\text{S}_2\text{O}_3^{2-}]_{\text{total}} = [\text{S}_2\text{O}_3^{2-}]_{\text{free}} + 2[[\text{Ag}(\text{S}_2\text{O}_3)_2]^{3-}] = 2.63 \times 10^{-3}\text{ M} + 2(1.0 \times 10^{-3}\text{ M}) = 4.63 \times 10^{-3}\text{ M}, which corresponds to 4.6×10−3 mol4.6 \times 10^{-3}\text{ mol} in 1.00 L1.00\text{ L}.

Loading workspace…